Piping Stress Engineer Hyderabad : Avineon

[muthukalee]

Designation : Piping Stress Engineer

Location : Hyderabad

Desired Profile :

Qualification : B.E/ B.Tech/ M.E/ M.Tech

Experience : 5 - 10 Years

Job Description:

[LIST][*]

Shall have knowledge in International codes and Practices.

[*]

Static Stress Analysis

[*]

Flange Leak checking

[*]

Calculation of Initial equipment nozzle displacements

[*]

Evaluation of nozzle loads as per WRC 107/WRC 297/ API 610/ API 617 etc.,

[*]

Preparation of critical line list

[*]

Relief Valve analysis

[*]

Occasional analysis like wind, seismic etc.,

[*]

Preparation of Spring/ Expansion Joint data sheet

[*]

Preparation and issue of Piping loads to Civil & Structural

[*]

Review of Vendor drawings

[*]

Support Design and mark-up on Piping drawings

[*]

Checking of ISO’s as per stress analysis/ support design

[*]

Awareness to Quality systems like ISO:9001

[/LIST]

Software Knowledge:

[LIST][*]

CAESAR II

[*]

3D model Review software like Smartplant Review, VPD Review, Navis Works (ADDED ADVANTAGE)

[*]

MS-Office skills are a must.

[/LIST]

Areas of Expertise:

Petrochemical/ Refinery/Power/ Oil & Gas/ Process

Contact Us at

Avineon India Private Limited

"White House" - Block III, 3rd floor,
Kundanbagh, Begumpet,
Hyderabad-500016. INDIA.
Phone: +91-40-66632452
Fax: +91-40-66687399

http://www.avineonindia.com

Please mail your resumes to : hr@avineonindia.com

[Guest-IJT]

Name : pramod p. kalbate
Email : ppkalbate AT yahoo.co.in
Designation / Skillset : piping engineer
From,
Pramod P. Kalbate
Dombivli- Mumbai
Dear Sir,
I am seeking an opportunity as Piping Engineer in your esteemed organization,
I have Engineering experience in piping & 3D Model on Oil, Gas & Chemical.
I would appreciate the chance to explore this opportunity further with you in person.
I can be contacted at –
Thank you for your consideration. I look forward to hearing from you soon.
Sincerely,

Pramod P. Kalbate

Resume :
RESUME’
PRAMOD P. KALBATE
Career Objective :
To secure a challenging position where I can effectively contribute my skills as a Piping Engineer in our Origination.
Career Profile :
Twenty Four years of experience, out of which Five years in Piping-Two years with leading Multi National Company in the Kingdom of Saudi Arabia.
Familiar With :
- ASME and ASTM Standards.
- Piping Flow Drawing, Piping & Instrument Drawing, Overall Equipment Plan,
Overall Piping Plan.
- Equipment Manufacturing Drawing, Pipe Racks, Pipe Supports, Platforms, Valves.
- Valve Data Sheet, Material Take Off, Piping Material Specification,
Piping Thickness Calculation.
- Drawing backup & Record Manton.
- All Piping Design activities.
- Interdisciplinary co-ordinate with other Related Department.
- Final As-built Drawing.
Hand’s On :
- Piping General Arrangement, Isometric with bill of Material.
- Checking Isometric with respect of P&ID, Piping G.A.
Experience in Detail :
IN INDIA
1. Worked with Converse Technologies Pvt. Ltd. Hyderabad, as a Piping Checker (Contract) on Qatar Petroleum Project from July 2010 – Jan 2011.
Job Responsibilities
- Checking Piping General Arrangement with respect to P& ID & Piping Layout & Corrections.
- Training to Cad Operators.
- Interdisciplinary co-ordinate with other Related Department.
2. Worked with Allied Furnaces Limited Mumbai. as a Piping Designer (Contract) from
June 2009 – June 2010.
1. Devi’s Laboratories Ltd Unit-1 Hyderabad.
2. Coromandal Fertilisers Ltd. Ankleshwar.
3. Rallis India Ltd. Tuuni Karnatak.
4. Jubilant Origins Ltd. Nanjangud –Mysore.
5. Deccan Origins Ltd.
Job Responsibilities
- Preparation Overall Piping Plan.
- Preparation of Isometric Drawing on AutoCAD.
- Checking Isometric with respect to P& ID & Piping Layout & Corrections.
- Site Visit for Final Piping Plan
- Material Take Off List.
MIDDLE EAST
3. Worked with Foster Wheeler Arabia Limited, as a Piping Designer (Contract) from July 2007 – May 2009, on Sharq 3rd Expansion Project SABIC – Jubail - Saudi Arabia.
Job Responsibilities

- Preparation Overall Piping Layout.
- Designing for New Lines Propylene, Ethylene, Fuel Gas, Plant Air, Water.
- Preparation of Isometric Drawing on AutoCAD.
- Checking Isometric with respect to P& ID & Piping Layout & Corrections.
- Pipe Support Checking in Smart Plant Review & arrange Site Revision Note.
- Working on Site Revision Note.
INDIA
4. Worked with Jasubhai Engineering P. Ltd Mumbai, as a Sr. Cad Designer from
Oct. 2005 – June 2007, Burner Division.
Job Responsibilities
- Preparation Proposal General Arrangement for Burner & P & ID.
- Drawing Approval from Client.
- Preparation manufacturing drawing for Skid, Burner, Pumping Unit & Panel.
- Inspection & Testing as per Drawing of Burner, Skid Pumping Unit.
- Co-ordinate with manufacturer ( Vendor ).
5. Worked with V.K.E Valves Industries Pvt. Ltd Mumbai, as a Sr. Cad Designer from
Jan. 1999 – Sept. 2005,
Job & Responsibilities
- Preparation Proposal General Arrangement .
- Drawing Approval from Client.
- Preparation manufacturing drawing for Valves.
- Responsible for all Design activities.
6. Worked with Dynawall Conveying & Elevating Co. Pvt. Ltd Mumbai, as a Mech. Draughtsman from Sept. 1985 – Dec. 1998.
Job & Responsibilities
- Preparation Proposal General Arrangement Conveyor Drawing.
- Drawing Approval from Client.
- Preparation manufacturing drawing for Conveyor.
- Inspection & Testing of Conveyor.
- Co-ordinate with Manufacturer ( Vendor )
- Erection & Commissioning on Site.
Education :
Technical : Piping Engineer Diploma –Suvidya Institute of Technology
Mumbai.
Navice Work & Navigator in Converse Technologies.
Smart Plant Review in Foster Wheeler Saudi.
Piping Diploma from Sharp Line Services Dombivli.
Pro-e from Cadsay Thane.
Auto Cad from Indo German Society Dombivli
Mechanical Draughtsman from Gupta Academy Mumbai.
School : S.S.C from Pune Board 1983.
Command on Software :
1. Windows XP & Windows 2000 Professional
2. PDS ( PLANT DESIGN SYSTEM )
3. Smart Plant Review
4. Pro-e
5. Auto Cad 2010
6. Micro Station

-------------------------------------------------------
More Information about this submission and submitter:-
___________________________________________________
Submission ID : 4142157
Date & Time : 17th May 2011 3:10 PM (UTC)
IP Address : 59.161.14.154
Browser Info : Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; InfoPath.2; .NET CLR 2.0.50727; .NET CLR 1.1.4322; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022)
Predicted Country : India

[Amith Rao]

AMITH RAO
Email : amithrao006 AT gmail.com
OBJECTIVE
To pursue a successful, challenging and exciting career while being able to dispense my maximum potential to the benefit of the organization and to contribute whereby i can grow to maximize my skills and experience along with organization.
EDUCATIONAL QUALIFICATION
- POST GRADUATION DIPLOMA IN PIPING ENGINEERING (PGDPE) IN THE YEAR OF 2010-2011
SUVIDYA INSTITUTE OF TECHNOLOGY , KALINA UNIVERSITY MUMBAI.
- BE/BETECH BACHELOR OF ENGINEERING (MECHANICAL) IN THE YEAR OF 2007-2010
VIVEKANANDA COLLEGE OF ENGINEERING AND TECHNOLOGY PUTTUR D.K,
VTU UNIVERSITY BELGAUM.
- SSC-KARNATAKA BOARD OF EXAMINATION
VIVEKANANDA HIGH SCHOOL (2002)
WORK EXPERIENCE
Working as a STRESS ANALYST in PURNA DESIGN ENGINEERS for power piping using tools such as CAEPIPE and CAESAR II since January 2011
ACADEMIC PROJECTS
Completed one year mechanical project. (self prepared project on design and fabrication of plastic coating machine)
AREA OF INTEREST
MECHANICAL ENGINEERING, DESIGNING, OIL AND GAS SECTOR, POWER SECTOR .
COMPUTER SKILLS
- CAEPIPE
- CAESAR II
- AUTO CADD
- SOLID EDGE
- OFFICE 2003/2007
INTEREST AND HOBBIES
Self improvement and motivational books, traveling, music,, football, cricket.
COMPETENCIES
Commitment to any work assigned, ability to perform in any stress related situation, creativity, adaptability.

[Guest]

CURRICULAM VITAE
Name : J. Narasimmalu
Total Years of Experience : 10+years
Relevant Experience : 7+years
Technical Qualification : D.M.E. 1st Class 2001
B.Tech. 1st Class 2010
Chennai-88
Company Working : Petrofac Engineering Services India Pvt
Ltd.,
Chennai, INDIA.
Designation : Designer
Software Knowledge : AutoCAD, Microstation, PDS & CAESAR II.
Responsibility : Piping Design Engineer Role.
Email Id : narasimmalu_81 AT yahoo.com

FINAL SEMESTER PROJECT
DESIGN & ANALYSIS OF BOILER DOWN COMER PIPES
During my project I was checked the stress, force& moment induced in boiler and also calculated using CAESAR II Build 5.10. Stress analysis was carried out in three load cases. Stressed induced on those cases were within the allowable limit. The stresses induced are satisfied with ASME B31.1
AREAS OF EXPERTISE :
- Preparation of P&ID MTO & Non P&ID MTO
- Preparation of Tie-in Gad Preparation
- Leading the Draughting Team
- Checking of Piping layout
- MTO checking
- Preparation of Civil Inputs(vessel platform, pipe rack section)
- Preparation of existing underground piping rerouting layout based on slit trench sketch
- Preparation of Piping Plan & Sections.
- Checking Piping isometric Drawings.
- Checking Pipe Support Layouts.
- Checking Pipe Support Detail Drawings.
- Preparation of Piping Isometric drawings.
- Generating Piping & Supports B.O.M.
- Preparation of Stress Isometrics.
- Review of P & IDs, Equipment G.As
- Development of concentric Reducer, Dish End, Mitter bend.
PRESENT EMPLOYMENT
Company Name : Petrofac Engineering Services India Pvt Ltd., Chennai, India
Designation : Designer
Responsibility : Design Engineer
From : August 2008
To : Till date
PREVIOUS EMPLOYMENT HISTORY
1) Company Name : GEA Energy System (India) Ltd., Chennai, India
Piping Engineering Division
Designation : Sr. Draughtsman
Responsibility : Designer
From : February 2006
To : June 2008
2) Company Name : VP Engineering Consultancy services, Chennai, India
Designation : Draughtsman
From : November 2005
To : February 2006
3) Company Name : Bharath Electronics Ltd., Chennai
Designation : Apprentice ship
From : May 2002
To : August 2003
4) Company Name : TVS (Diesel system)
Designation : Trainee
From : June 2001
To : march 2002
WORK EXPERIENCE
Present Organization
Petrofac Engineering Services India Pvt Chennai, India, August ’08 to till date
Designer
Responsibilities
- Piping Design Engineer Role.
- MTO checking.
- Checking of piping layout.
- Preparation of P&ID MTO & Non P&ID MTO.
- Preparation of Tie-in Gad Preparation.
- Leading the Draughting Team.
Previous employment
a) Piping Engineering Division
GEA Energy System (India) Ltd., Chennai, India, February ’06 to June 2008
Sr. Draughtsman
Responsibilities
- Piping Designer Role.
- Preparation of Piping Layouts.
- Checking Piping Fabrication Isometrics.
- Checking Pipe Support Layouts.
- Checking Pipe Support Detail Drawings.
- Preparation of Piping Isometrics.
- Preparation of Pipe Support Layouts and Detail drawings.
- Generating Piping and Supports B.O.M.
- Preparation of Stress Isometrics.
- Review of P & Ids and Equipment G.As

b) VP Engineering Consultancy Services, Chennai, India Nov ’05 to February 2006.
Draughtsman
Responsibilities
- Preparation of Piping Isometrics.
- Preparation of Pipe Support Layouts and Detail drawings.
- Generating Piping and Supports B.O.M.
c) Bharath Electronics Ltd., Chennai, India May ‘02 to Aug ’04.
Draughtsman
Responsibilities
- Design and drawing preparation of Mechanical equipments required for Electronic Equipments using AutoCAD.
FIRST ASSIGNMENT IN KUWAIT
I went to Kuwait site for tie in (piping) routing feasibility and measurement it was two month assignment. There I worked two projects they were water injection phase and MAA refinery. I have calculated Pneumatic pressure test of instrument air piping for MAA Refinery.
May ’11 to July 2011
ACHIEVEMENTS
Was involved in numerous Piping Detailed Engineering and proposal projects, few of which are as under:
A. As DESIGN ENGINEER ROLE for the following Projects & Client
- Gas sweetening facilities, Qatar Petroleum (QP).
- Effluent water injection phase-1& seawater injection phase – 2, Kuwait Oil Company.
- Hewett gas storage,
- Nghi Son refinery & Petrochemical (NSRP).
- Ruwais Expansion.
B. As DESIGNER ROLE for the following Projects & Clients:
- 500 MW Vijayawada Thermal Power Station, A.P India
- 500 MW Khaperkeda Thermal Power Station,
- 500 MW Kakathiay Thermal Power Station, A.P. India
- Nestle Steam & Water System for the Noddle Plant Expansion, Utaranchal
- 100 MW Natural Gas Based Power Plant, TNEB Valuthur
C. As DRAUGHTSMAN ROLE for the following Projects & Clients:
- Captive Power Plant for Visag Steel Plant for TSPL, Hyderabad, A.P. India.
- Captive Power Plant Shyam DRI for TSPL, Hyderabad, A.P.
- Captive Power Plant Chanderiya Zinc Smelter Phase II for TSPL Hyderabad, A.P.
- Captive Power Plant Tokyo Cements for TSPL Hyderabad, A.P.
- 60 KM Refinery Condensate pipeline for ONGC Karaikal, for Nicco Corp Kolkatta
- Condensate & water System Piping for 10 MW Kamachi Sponge Iron.
- Condensate & water System Piping for 5.5 MW PT Cabot Indonesia.
- Condensate & water System Piping for Mangalam Cements Ltd, Rajasthan
- Condensate & water System Piping for Hitech Carbon Gummidipoondi.
- 2 x8.5 MW Biomass based Power Plant for Walchandnagar industries.
- Cogen Plant for NRI Power & Steel Ltd. For Thermax Ltd. Pune.
- Cogen Plant for Dev Priya Papers Ltd.

[Guest]

this sravan kumar searching for piping engineering job