Punjab State Transmission Corporation Ltd Recruitment 2010 : Sub Station Operator

[Admin]

PUNJAB STATE TRANSMISSION CORPORATION LIMITED.
( Wholly owned company of Pb. Govt.)
OFFICE OF THE
CHIEF ENGINEER/SO&C, PSTCL, 220 KV GRID SUB STATION, ABLOWAL, PATIALA-147001(www.punjabsldc.org)

Punjab State Transmission Corporation Limited, engaged in construction of Transmission Lines and sub substations across State of Punjab intends to recruit following staff on contractual basis.

S.No. Post No. Qualification Experience Salary

1 Accounts Officer
5 posts, CA/ICWA, Minimum 3 Years, Rs.45,000 P.M fixed

2 Accountant
10 posts, CA(Inter)/ICWA Inter/M.Com 1st div Minimum 3 years
Rs.30,000 PM fixed

3 Manager(MIS)
1 posts, B.E.Computer./ M.C.A./ M.Sc.(IT), (1st Divn in all streams)
Minimum 5 years in MIS
Rs.40,000 PM fixed

4 Assistant Manager(MIS)
2 posts, B.E.Computer./ M.C.A./ M.Sc(IT) (1st Divn in all streams)
Minimum 1 years in MIS
Rs.25,000 PM fixed

5 Draftsman(autocad)
2 posts, 1st Class B.C.A. with Autocad certificate course
Minimum 3 years in Autocad (Elect. & Civil)
Rs.20,000 PM fixed

6 LDC(Clerks)
20 posts, 1st Class Graduate in any stream with one year Computer Diploma from any Recognized institute,( 1st Divn B.C.A. Preferred)
Nil
Rs.15,000 PM fixed

7 Sub Station Operator
30 posts, Diploma in Elect. Engg. in 1st Divn. (1st Class Degree Holder in Elect.Engg. preferred).
Nil
Rs.20,000 PM fixed

8 Sub Station Attendant
30 posts, 1st Divn Diploma Holder in Elect.Engg. in.
Rs.15000 PM fixed

Minimum and maximum age as on 1.1.2010 should be between 21 and 35 years respectively. Age relaxation of 5 years in case of reserved category. Punjab Govt. Reservation policy will be followed.

Applicants desirous of seeking recruitment in PSTCL may apply on plain paper in the following format with recent passport sized photograph duly affixed on application form and self-attested. Applications complete in all respects must reach this office (office of Chief Engineer/SO&C, PSTCL, 220 KV Grid Sub Station, Ablowal, Patiala-147001) by 10th September, 2010 up to 5.00 PM. Documents to be attached in support of different proofs should be self-attested. Incomplete applications will be out-rightly rejected. Proof of age/ qualification/ experience/ reservation etc. not provided up to due date will not be entertained beyond that.

http://www.punjabsldc.org/News/recruitment.pdf

[Guest-IJT]

The submitted value of field named "Name :" is:
SARAVANAN murukesan
-------------------------------------------------------
The submitted value of field named "Email :" is:
saravanan846 AT gmail.com
-------------------------------------------------------
The submitted value of field named "Designation / Name of the Post / Skill Set" is :
AUTOCAD DRAFTSMAN
-------------------------------------------------------
The submitted value of field named "Copy Paste Your CV / Resume Here :" is:
-------------------------------------------------------
RESUME
SARAVANAN MURUKESAN
DESIGN DRAFTSMAN
- Email ID : saravanan846 AT gmail.com,
saravanan.murukesan AT gmail.com,
CAREER OBJECTIVE :
To be an aspiring professional working towards achieving the goals of the organization keeping in mind the mission to be achieved and executing it with dedication and sincerity, to promote and expand the organization’s operations
EDUCATIONAL QUALIFICATIONS
Degree : Three Year Diploma in Electrical Engineering (70%)
University/Board : Technical Board (Government of KERALA )
College : Carmel Poly Technic College, Alappuzha,KERALA,INDIA
Year Graduated : 2008
Computer Skills
- Micro station V7 & V8
- AutoCAD
- Microsoft Word
- Microsoft Excel
EXPERIENCE SUMMARY
- CADD DESIGNER – Saihati Engineering Service India Pvt. Ltd.- KERALA,INDIA
- CADD EXECUTIVE – Saudi Engineering Group of International.-
- DAMMAM, SAUDI ARABIA
- DESIGN DRAFTSMAN -WORLY PARSONS ARABIA LIMITED(PETROCON),AL-KHOBAR,SAUDI ARABIA
PROFESSIONAL EXPERIENCE
COMPANY : SAIHATI Engineering Services Pvt Ltd (A GROUP OF SEGI)
Techno park, Thejaswini Bldg. INDIA
POSITION : CADD DESIGNER
PERIOD : July 2008 - November 2008
Job Description
- Designing and drafting the drawings for Saudi Aram co.
- Preparing as-built drawings, standardizing the drawings to the Aram co standards.
- Preparing as-built drawings, standardizing the drawings to the Aram co standards
- Performing quality check for each model against the drawings
- Drafting new Drawings As Per Client Needs
- Drafting Multi-Discipline Engineering drawings using Micro station V7/V8 & AutoCAD
Company : Saudi Engineering Group International (SEGI)
Dammam, Kingdom of Saudi Arabia
Period : November 2008 – October 2009
Project : Qurayyah Seawater Expansion Plant (QSWP)
Position : CAD Executive
Client : Saudi Aramco
EPC Contractor : Snamprogetti Saudi Arabia Ltd
Duration : September 2009 – December 2009
Job Description
- Drafting new Drawings As Per Customer Needs Drafting Multi-Discipline Engineering drawings using Micro station V7/V8 & AutoCAD
- Creation of new drawings for the site, implement site modifications in drawings
- Preparing as-built drawings & standardizing the drawings to Client’s Standards
- The job involved the As-Built implementation in all the drawing of all disciplines as per Saudi Aramco Cad Standard (SACS -2.5.1). Preparation of new Engineering as well as Vendor drawings.
- As-built modifications and additions to 3-D Models for the Piping & Equipment Configuration, Micro station as well as issuing final CADD Drawings and other documents.
- Preparation of General Arrangement Drawings.
Project : Khursaniyah Producing Facilities (KPF)
Position : CAD Executive
Client : Saudi Aramco
EPC Contractor : Snamprogetti Saudi Arabia Ltd
Duration : April 2009 – August 2009
Job Description
- CADD operator / As-built controller for Civil, Mechanical, Electrical and Piping. The job mainly involved the creation of new drawings for the site, modified the red line mark-up, Site modification as well as updating the drawings for the site. Includes, Civil, structural, Architectural drawings, Mechanical drawings, Isometrics drawings.
- As-built modifications and additions to 3-D Models for the Piping & Equipment Configuration, Micro station as well as issuing final CADD Drawings and other documents.
Project : Khurais WIP Station & Utilities Project (KUC)
Position : CAD Executive
Client : Saudi Aramco
EPC Contractor : Snamprogetti Saudi Arabia Ltd
Duration : November 2008 – Jan 2010
Job Description
- Drafting new Drawings As Per Client Needs
- Drafting Multi-Discipline Engineering drawings using Micro station V7/V8 & AutoCAD
- Creation of new drawings for the site, implement site modifications in drawings
- Preparing as-built drawings & standardizing the drawings to Client’s Standards
Company : WORLY PARSONS ARABIA LIMITED
(PETROCON ARABIA LIMITED)
Period : Jan 23 – Till date
Project : REPLACEMENT DATA NETWORK ENGINEERING,
MANIFA,JUBAIL EXPORT REFINERY
Position : DESIGN DRAFTSMAN
Client : Saudi Aramco
EPC Contractor : STESA
Job Description
- Drafting Multi-Discipline Engineering drawings using Micro station V8
- Creation of new drawings for the site, implement site modifications in drawings
- Preparing construction drawings & standardizing the drawings to Client’s Standards
- Preparing wiring Diagram, Fiber Optic Cable Allocation Diagram with the help of Block and level and Diagram.
- Creation of new Electrical Power Drawings, Floor plan details and also updating in SharePoint.
- Creation of Electrical Wiring Diagram, Electrical One Line Diagram, Cable and Conduit Diagram and Panel Schedule for Different Areas like CA,CR,SA,NA and WR Region as per Steza requirements
- Creation of block and level Diagram, Wiring diagram, Rack Face Elevation and Fiber Optic Cables from the appropriate building details fo different areas like CA,CR,SA,NA and WR.
- Creation of Electrical wiring diagram from Cable, Conduit and Trench layout.
- Calculation of cable size, type, laying from the length and temperature of the area.
- Replacement of Equipments as per clients Requirements.
- Standardization of electrical wiring diagram as per Aramco comments,
- Assigning DCC to Different Areas as per Aramco Standards and Final Submission of electrical Drawings to Steza.
- Creation of Logical Diadgrams for the different building from the appropriate building details,
DECLARATION
I hereby declare that all the information furnished above is true to the best of my knowledge and belief
PLACE :
DATE :
SARAVANAN MURUKESAN
-------------------------------------------------------
More Information about this submission and submitter :-
___________________________________________________
Submission ID : 4096710
Date & Time : 6th May 2011 1:39 PM (UTC)
IP Address : 121.246.67.50
Browser Info : Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.4) Gecko/20100611 Firefox/3.6.4 GTB7.1
Predicted Country : India

[Guest]

CURRICULUM-VITAE
CHANDER MOHAN

E-Mail :- chanderht AT Gmail.com

OBJECTIVE :
To join reputed organization which gives opportunity for Professional and personnel by enhancing the knowledge and skills, learn during the professional career and I want to be solid part in each and every step toward growth and prosperity of the organization.
STRENGTHS :
Look upon myself as result oriented person capable of Performing under stress and adverse conditions. Punctuality dedication of work adaptability and team work.
EXPERIENCE :
One year experience in H.T. Media Ltd. Patiala as a Computer Operator.
Presently I am working with KNACK BPO PVT. LTD. MOHALI as a Sr. Process Associate (In Healthcare Billing Process ) from Sep-08 to till date.
i
QUALIFICATION :
* Matric Passed from Punjab School Education Board.
* +2 (Arts) Passed from Punjab School Education Board.
* Graduation done from Punjabi University, Patiala.
PROFESSINAL QUALIFICATION :
* PGDCA done from Punjab Technical University Jalandhar.
* MSC-IT done from Punjab Technical University Jalandhar.
EXTRA ACTIVITY :
* I know English Typing.
TALENT AND ABILITY :
I am young boy of dynamic nature and hardworking. My amputation is to be a part in every step of growth and prosperity of the organization which in turn is my growth and prosperity.