www.sterlingandwilson.com Sterling & Wilson Pvt Ltd Mumbai : QUALITY CONTROL ENGINEER

[mskavi]

Sterling & Wilson Pvt Ltd Mumbai : QUALITY CONTROL ENGINEERS
http://www.sterlingandwilson.com

About us :
STERLING AND WILSON ELECTRICALS, an associate company of SHAPOORJI PALLONJI GROUP is the only Indian engineering company having its own in house team to execute jobs covering all services i.e. Electrical, HVAC and DG sets. Through our national network of 7 branch offices and strength of over 700 engineering and support staff, we have handled the most complex electro-mechanical projects in the country in record time without compromising on quality and safety.

We have also set up one of the largest DG set manufacturing plants in India covering gensets ranging from 250 KVA to 3000 KVA. We are involved in Transmission and Distribution and rural electrification projects as well.

We provide a professional work environment, opportunity to innovate and take decisions. We are looking forward to increase our team of professionals who share our dream of ensuring that Sterling and Wilson retains it's position as the leading Electro-Mechanical company.

This is an all India advertisement and we require all positions at Mumbai, Delhi, Calcutta, Chennai, Bangalore and Hyderabad. All positions carry good perquisites and best salary in the industry. Please quote position applied and preferred Branch Location on top of application. Enclose complete Bio-Data and a passport size photograph and contact number etc.

QUALITY CONTROL ENGINEERS(Projects) :
Graduate / Diploma in Electrical Engineering with 4-5 years experience

Graduate / Diploma in Electrical Engineering with 4-5 years experience in handling big Electrical projects. Responsibility will include checking quality of material supplied and checking periodic inspection of materials under manufacturing at vendors works.

Submit your Resume

Contact us :
Head Quarters :
Sterling & Wilson (P) Ltd.,
Kasturi Building, Sanghavi Industrial Estate,
Govandi Station Road ,
Govandi (E),
Mumbai - 400 088.
Tel. : 022-25485300
Fax. : 022-25485331 / 352

Factory :
Sterling & Wilson (P) Ltd.,
Survey No. 59, 343/1
Village kala, Kherdi, Khanvel,
Silvassa
U.T. of Dadra & Nagar Haveli
Tel : 0260 - 2677408 / 419
Fax : 0260 - 2677408

[Guest-IJT]

CURRICULAM VIATE

ANURAG KUMAR PORWAL
Permanent Address: BABU DYARAM NAGAR,
NAHAR BAZAR DIBIYAPUR
AURAIYA (U.P.)
PIN-206244
TEL (MOBILE) : 09886730783
: 09379132647
Email : kumaranurag49 AT gmail.com

Education : SSLC from UP Board in year-2002 with 47%.
: 10+2 from UP Board in year-2004 with 66%.
: Graduation from C.S.J.M.University KUMAR (IN PCM) year-
- 2007 with 54%
Technical- : Post Graduate Diploma in Plastic Processing And Testing.
(Year-2007-2009) with74%
Name of Institution: CENTRAL INSTITUTE OF PLASTIC ENGINEERING & TECHNOLOGY
Location : Haldia West Bengal, India
Objective
To provide a meaningful contribution to plastics/polymer processing & testing industry by clubbing the knowledge and skill gained in plastics processing & testing. It will happen through a position offering significant challenge and developmental opportunities in Polymer material and Business Development.

Employment History

1. Company Name : TATA AUTOCOMP SYSTEMS LTD. (IPD)
Position : Shift Engineer –Production Dept.
Specialization : Injection Molding
Industry : TS 16949, ISO 14001, Q1 certified & one
Of the leading Companies of supplying Automotive parts to the OEM’s like
TOYOTA, FORD, TATA MOTORS, RENAULT-NISSAN.


Date Joined : 27th August 2008 to till date
Computer skills & Extra achievements
- Basic knowledge of computer
- Paulsion training programme from CIPET HALDIA.

Machines at TACO-IPD:

- Injection Moulding Machines: Sigma farromatic Millacron 500T, Engel 900T, Engel 2500T, L&T 250 T.

- Assemblies: Ultrasonic welding, Vibration welding etc.



Job Responsibility
- Trouble shooting for IMG
- Responsible member in production planning control and supervision
- Production, Scheduling and monitoring
- Work allotment for workmen
- Inspecting the status and identification of materials.
- To monitor periodic production activity
- Monitoring, Control and involved in executing the production from the work force through supervision as per production plan.
- Identifying the process non conformities, analyzing root cause, implementing standardization with follow up and co-ordinate with service.
- Achieving planned targets
- Involving in team meeting for future planning and forecasting
- Updating of all records
- Preparing document like work instruction, machine start up procedures.
- To reduce in process rejection percentage.
- Check all SMP (standard molding parameters) for injection Molding.
- To maintain 3C and 5S in shop floor.
- To analyze FMEA, KAIZENS and POKA-YOKE, CAPA..
- Check all process Quality which related to process of Molding.
- Cycle time reduction
- To increase OEE and Efficiency as per shift.
- To increase productivity.\

PERSONAL DETAIL:
Name : Anurag Kumar Porwal
S/O Shri Devendra Kumar Porwal
Age : 23 Years
Date of Birth : 10MAY 1987
Nationality : Indian
Gender : Male
Marital Status : Unmarried
Permanent : North India (Uttar Pradesh)
Residence : South India (BANGLORE)
Current CTC : 131000 / ANNUM

KEY SKILLS:
- Good Communication Skills.
- Have good level of persuasiveness
- Can work effectively in team, as an individually.
- Have good inter-personal skills and relationship.

Truly:-
Date: 12.08.2010
ANURAG KUMAR PORWAL
Place: BANGLORE

[Guest]

FRANCISCO B. AGULAY JR.
Email : jun.agulay AT yahoo.com

APPLICATION : QUALITY CONTROL ENGINEER
EDUCATIONAL BACKGROUND :
1989 Bachelor of Science in Civil Engineering
TECHNOLOGICAL INSTITUTE OF THE PHILIPPINES
Quiapo, Manila - Philippines

COMPUTER KNOWLEDGE :
o M.S. Office Application (Word and Excel)
o Auto Cad
PROFESSIONAL EXPERIENCE :
HARD PRECAST BUILDING SYSTEMS L.L.C.
P.O. Box 37642, Dubai Investment Park - U.A.E.
E-mail ¬¬– mail AT hardprecast.com www.hardprecast.com
October 2010- May 2011 SENIOR QUALITY CONTROL ENGINEER
Duties & Responsibilities :
o Controlling the quality of the precast and pre stressed concrete product.
o Checking the production drawings, the erection drawings with the plant engineer and designer.
o Checking the formworks, reinforcement, inserts and to ensure the implementation is to be according to the specifications and the drawing.
o Discuss the technical problem in the design, find the solution and discuss them with the plant engineer.
o Coordinate between the erection performance related to the quality of the products to improve the production system and avoid any mistakes.
PROFESSIONAL EXPERIENCE :
CONCRETE TECHNOLOGY L.L.C.
P.O. Box 31950, Dubai, U.A.E.
E-mail ¬¬– concretc AT emirates.net.ae
DEC.-2001toMAY 2010 - SITE QUALITY CONTROL MANAGER
Duties & Responsibilities :
o Ensuring of site inspections are carried out as per the approved procedures.
o Carry out and document the inspections according to Inspection Test Plan (ITP) indicating the following process/stages have been correctly carried out.
o Prepare the method statement of repair.
o Familiar with the requirements of ISO 9001 Quality Management System.
o To follow up NCR issued and ensure necessary curative and corrective action is taken in the defined period to avoid its recurrence.
o Ensuring the daily inspection schedule is prepared by the QC inspectors.
o Ensuring the latest approved drawing is used at site.
o Conduct the Quality Control Inspection as scheduled and planned by the management.
o To execute and monitor the quality control procedures such as frequent testing and approving raw materials.
o Impose Quality Control measures at site before casting and during casting.
o Closing non conformance report.
o Inspection of technical materials received.
o Reviewing the customer complaints and taking corrective action to avoid its recurrence.
o Conforming that all Measuring and Monitoring devices are calibrated as per the schedule dates.
o Check type of reinforcement sizes, dimensions, and quality as per drawings.
PROJECT UNDERTAKEN :
DUBAI MARINA TOWER EMAL PROJECT (EMIRATES ALUMINUM)
PHASE 1 & PHASE 2 POTLINE AMENITIES AND ELECTRICAL ROOMS
DUBAI, U.A.E. ABU DHABI, UAE
MASDAR CITY PROJECT DUBAI INDUSTRIAL CITY
SUSTAINABILITY COMMUNITIES WAREHOUSES AND SHOWROOM
ABU DHABI, UAE DUBAI, U.A.E.
THE MEADOWS VILLAS-PHASE 1 AL MARJAN ISLAND
DUBAI, UAE RAS AL KHEIMA, UAE – IN PROGRESS
PROFESSIONAL EXPERIENCE :
ALRASHID ABETONG CO. LTD
Precast Construction and Ready-Mixed Concrete.
P.O. Box 6058, Riyadh 11442
Kingdom of Saudi Arabia
MARCH 1996 TO DEC. 2001 QUALITY CONTROL ENGINEER
Duties & Responsibilities :
o Inspect all batching, mixing, material handling, compaction, curing, product handling and storage procedure.
o Check the fabrication and placement of steel panel frames and bonding pads.
o Preparing or evaluating mix designs, considering strength, durability and appearance.
o Quality control of pre-stressed and precast element such as sweede beam, doubletees, hollow core slabs, form slabs, column, beam external and internal walls, water tank, barrel vault, dome. boundary wall, piles, etc.
o Taking representative test samples and performing all required testing..
o Inspecting all finished products for conformance with shop drawings, approved samples and project requirements.
o Preparing and maintaining complete quality control records..
o General observation of plant equipment, working condition and other items which have the potential for affecting the products..
PROJECTS UNDERTAKEN :
DR. NASSER PRIVATE VILLA AL RUGAIB SHOWROOM NAJD SCHOOL
Riyadh-Saudi Arabia Riyadh, Jeddah, Dammam-KSA Riyadh-Saudi Arabia
SSSP HEAD OFFICE COMPLEX JADAWEL RECREATION AL FALAK CENTER
Riyadh-Saudi Arabia Riyadh-Saudi Arabia AlKhoba-Saudi Arabia
THUMAMAH TRAINING CENTER EQUINE LANORATORY & HOSPITAL
Riyadh-Saudi Arabia Janadriah-Saudi Arabia
AL SADHAN SHOPPING CENTER AL OTHAIM SHOPPING CENTER
Riyadh-Saudi Arabia Buraidah-Saudi Arabia
PHILANTROPHY CENTER SAAD AL AMAR PALACE
Riyadh, Saudi Arabia Riyadh, Saudi Arabia
AL SALEH MOSQUE KINGDOM SCHOOL
Dammam, Saudi Arabia Riyadh, Saudi Arabia

PROFESSIONAL EXPERIENCE :

JADAWEL INTERNATIONAL CO. LTD.
Kingdom of Saudi Arabia
AUGUST 1991- MAY 1996 - CIVIL SUPERVISOR (QUALITY CONTROL)
Duties & Responsibilities :

o Site in-charge for the quality control inspection of architectural precast concrete units and concrete structures.
o Supervised all phase of construction works such as civil, structural and architectural works were in accordance with plans, contracts and specification.
o To check the quality and progress of work such as : block works, tile works, water proofing, sealant application, plastering works, painting works, doors and window installation.
o Monitor all test results in the laboratory to ensure that the results are in compliance with the specification.
o Coordinate with the Mechanical and Electrical Engineers for their preparation prior to concrete pouring.
o Validate progress reports of Sub-Contractors
o Arrange punch/ defect list before final acceptance.
PROJECTS UNDERTAKEN :
o COMPOUND C – AL RAKAH VILLAGE in Al Khobar-Dammam Beach Road
(175 Villas with Central Facilities)
o COMPOUND D – Jadawel Motel in Al-Khobar
(100 Villas with Central Facilities)
o COMPOUND E – Jadawel City in Al-Khobar-Dammam Beach Road
(520 Villas with Central Facilities)
o COMPOUND F – Dorrat Al-Jadawel in Riyadh
(408 Villas with Central Facilities)
PROFESSIONAL EXPERIENCE :
JB BUILDERS CO. INC.
Mariveles St. Quezon City
Philippines
JANUARY 1990- APRIL 1991 PROJECT ENGINEER
Duties & Responsibilities :
o Arrange estimate for bid proposal.
o Attend pre-bidding / bidding.
o Planned and organized man power and materials at site and reported under the project manager.
o Organize list of materials for priority procurement.
o Prepare weekly / monthly accomplishment report.
o Ensure that the work is carried out in accordance with technical specification.
o Conduct quality check, troubleshoot arising problems on field.
o Commits to the safe implementation of the project
o Supervise implementation of the project for the whole contract.

[Guest]

H. THAMISHARASAN
Email : limatenjoy AT ymail.com

Career Objective
To apply my technical skills and knowledge to full use in the place of my work and to improve myself and the company through constant learning and hard work..
Academic Details
Bachelor of Engineering in Electrical and Electronics (64%)
Course Completed November 2009
ANNA UNIVERSITY
(GKM College of Engineering and Technology
Chennai-63 ,Tamil Nadu, INDIA)
DIPLOMA in Electrical and Electronics Engineering (76.83%)
Passed out April 2006
(Swamy Abedhanandha polytechnic college
Thellar ,Tamil Nadu, INDIA)
X STD – (54%)
2001 passed out
SS Higher Secondary School
Arani,Tamil Nadu, INDIA
Computer Proficiency
- MS Office,
- Windows 2003/XP/Vista
- Auto CAD
Software Exposure :
- Proficient in Programmable logic controller
Achievements :
- Basket Ball Player in College Team
- Chess Player in College team
Previous Experience
Organization : Power Process Eng (I) Pvt. Ltd.

Designation : Testing & Quality Engineer
Period : JULY 2009 To July 2010

EXPERIENCE DETAILS
TESTING OF ELECTRICAL EQUIPMENTS :
1. Up to 45 MVA Transformers.
2. Static relays (Over current/Earth fault relays, Differential and Instantaneous relays .)
3. Third Party Inspection of HT Lines, Transformers, LT Lines & BPL Connections Under REC Rules.
4. Material Inspection of PIN insulators up to 11 KVA.
5. Material Inspection of Single Phase Energy Meters (10-60 Amp).
6. Material Inspection of Single Phase Energy Meter Box.
PROJECTS HANDLED :
1. Testing of relays, Transformers in Zylog Software solutions, Chennai, TamilNadu.
2. Testing of relays, Transformers in Sri Venkateshwara Engineering College, Thiruvallur District,Chennai, TamilNadu.
3. Testing of Relays in Annamalai University, Chidhambaram, TamilNadu.
4. Team Leader (Testing & Quality engineer) in RGGVY Project In Haryana and Jharghand Site Under REC Rules.
5. Material Inspection of PIN insulators up to 11 KVA In Suraj Ceramics Industry, Bikaner, Rajasthan.
6. Material Inspection of Single Phase Energy Meters In Secure Meters Limited, Barotiwala, Himachal Pradash.
7. Material Inspection of Single Phase Energy Meter Box In Fine Components, Fariddabad, Haryana.
Present Experience
Organization : R.M.H Control & System.
Company Profile : Manufacturers of all types of Control Panels for all
Types of industries and specialist in Auto Mains Failure
System (AMF), AC, and DC Drive Controls, Synchronizing Panels.
Designation : Designing Engineer. (Auto Cad)
Period : Aug 2010 To Till Now
EXPERIENCE DETAILS
JOB PROFILE :
Quotation & Designing of following Panels,
1. Main Voltage Panel .
2. Power Control Panel.
3. Motor Control Panel .
4. Automatic Power Factor Correction & Relay Control Panel.
5. Auto Mains Failure Panel (AMF).
6. Auto Synchronizing Panel.
7. AC & DC Drive Control Panel.
8. Battery Changer Control Panel.
9. Auto Transformer Starter Control Panel.
10. Rotor, Resistance Starter Control Panel.
11. Bus Ducts.
12. Raising Mains.
PROJECTS HANDLED :
1. Designing of LT and ATS PANEL For AYYAR BHAVAN, Chennai, Tamil Nadu .
2. Designing of MCC PANEL For MADARS PHARMACEUTICAL, Chennai, Tamil Nadu .
3. Designing of COS PANEL For RKM ELECTRICALS, Chennai, Tamil Nadu .
4. Designing of COS PANEL For RKM ELECTRICALS, Chennai, Tamil Nadu .
5. Designing of LT PANELS For PRIYA ENTERPRICES ELECTRICALS, Chennai, Tamil Nadu,
To the Client : KTDC Hotel, Chennai,
Academic Project
- Diploma project :
Automatic Solar Tracking System
- Engineering projects :
Mini project : Automatic Night Lamp with morning alarm
Main project : State Load Automation Center
Skill Sets
- Good knowledge about Testing and Commissioning in HT lines, Transformer, LT lines & House Hold connections under REC Rules.
- Good team player, Fast learner and a Hard worker.
- Able to handle a site.
- Self Confident, Motivated
- Creative thinking
- Leadership and Interpersonal skills

[simbu_1988]

S.SILAMBARASAN
Objective :
To work in a globally competitive environment on challenging assignments that shall yield the twin benefits of the job satisfaction and steady paced professional growth firm.
Summary of Experience : (2.2 years)
- Having Sound knowledge in Third Party Inspection, Raw Material Inspection, Forging Components, as per IS Standards and Approved QAP.
- Having excellent drawing skills through Auto CAD
- Expertise in Mechanical-Quality having a prime focus on Quality Assurance and Quality Inspection
- Having knowledge in NDT Level II
Professional Work Experience :
Company : S.G.S. India Pvt Limited, Hyderabad, Andhra Pradesh OCT 2009 – Till date
Role : Quality Assurance & Quality Control Engineer
Key Projects
Project #1 Third Party Quality Assurance for GandiKota C B R Lift Irrigation Projects, Pulivendula, Kadappa District, Andhra Pradesh, India
Client
Andhra Pradesh Irrigation CAD Department
Role
Quality Testing Inspector
Technology IS standards and Client Requirement standards
Description Third party Quality Control/Quality Assurance for Civil Works, Pipe line and allied Works, Hydro- Mechanical, Electro- Mechanical Works of 6 stages pumping of water from Gandikota reservoir to Chitravathi Balancing Reservoir.
Responsibilities
- Field inspection procedures, inspection check list.
- Conducting welder qualification as per approved Welding Procedure Sheet (WPS).
- Control and ensure that calibration certificate for machineries/gauges are available for
Inspection checking alignment of pipes.
- Checking of weld defects like extra penetration, Lack of fusion, Blow Holes, Porosity e.t.c.
- Checking Dry Film Thickness (DFT).
- Checking Cleaning Procedures (Sand Blasting)
- Checking Ovality of the pipe.
- Preparation of material identification and dimensional reports before start of piping/tank work.
- Preparation of fit-up and welding inspection report.
- Preparing stage wise inspection as per approved Integrated Technology Planning.
- Guiding, controlling, monitoring, supporting a team of various discipline QC Inspectors.
- Welding inspection requirement and NDT plan.
- Verification of personal qualification of NDT personnel and welders.
- Issue of non –conformance report and ensure that corrective action taken.
- Attending weekly progress meeting with client representing QC team.
- Prepare internal audit and conduct auditing as part of ISO 9001 requirement.
- Witnessing of hydraulic test.
- Preparation of quality certificate for execution work.
- Uploading project monitoring system.
Scope of Work :
- Providing Quality assurance as per IS, ASME and ISO standards for Domestic and International Customers
- Inspection For fire fiting,Internal Safety Audits
- Government Institutional Services(GIS) for Exports.
- Doing industrial Inspection for Engineering Goods.
- Preparing Quality and Clearance Notes, Report of Findings and Release Notes.
Additional Experience :
o Knowledge in Civil Design Mixtures.
o Inspection of Civil Structures.
o NDT methods.
Computer Skill :
- Windows XP, Windows Vista, Windows 7
- MS Office
- Internet Concept
Education :
Bachelor of Engineering – Mechanical Engineering (May 2009)
Completed a degree in Bachelor of Engineering 73% of First Class from Jeppiaar Engineering college, Chennai, TamilNadu, affiliated to Anna University Chennai, Tamil Nadu.
Diploma in Mechanical Engineering (April 2007)
Completed Diploma in Mechanical Engineering 78.50% of First Class with honours from The Karur Polytechnic College, Karur, TamilNadu, affiliated by State Government of India, Tamil Nadu.
Certifications :
- AutoCAD
- NDT (LEVEL2)
- Ansys