Rail Wheel Factory Recruitment 2010 : ITI Trade Apprentices

[Admin]

RAIL WHEEL FACTORY

(Indian Railways)

GENERAL MANAGER'S OFFICE,

(Personnel Branch),

Yelahanka, Bangalore-106.

No.RWF/AT-16/627/2010-11. Dated:01.07.2010

N O T I F I C A T I O N

Applications are invited from candidates who have passed ITI (NCTVT) from recognised Institutions to undergo training as Trade Apprentices under the Apprenticeship Act 1961 for the year 2010-2011, in the under mentioned designated trades:-
Sl No. Designated Trades No. of Seats 1 Fitter 18 2 Machinist 07 3 Electrician 04 4 Mechanic (Motor Vehicle) 01 5 Turner 01 6 Electronic Mechanic 03 7 CNC Programming-cum- Operator. (COE Group) 02

Total 36

As per special reservation rules, out of the 36 seats, 05 will be reserved to candidates of `SC' community and 03 to `ST' community, 10 to OBC's and one to Orthopaedically impaired.
Further, 3% of the seat is reserved for:
Children of deceased/disabled Ex-servicemen including those killed/disabled during peacetime. 2) Children of Ex-Servicemen 3) Children of serving Jawans 4) Children of Serving Officers 5) Ex-Servicemen.
The conditions to be satisfied by the applicants are as follows:
2. PRESCRIBED EDUCATIONAL AND TECHNICAL QUALIFICATION:-
a. General: Passed Matriculation Examination with Science (Physics & Chemistry) or its equivalent or 10th Class Pass under 10 plus 2 system.
b. Technical: Must possess ITI(NCTVT) certificate in any one of the designated trades
specified above from a recognised Industrial Training Institute.
c. Age Limits: As on 01.07.2010, must have completed 15 years and should not be more than 24 years. The upper age limit can be relaxed by 5 years in case of SC/ST candidates and 3 years in case of OBC candidates.
d. Duration of
Apprenticeship: Apprenticeship is one year for all the designated trades indicated above
at sl no. 1 to 6 and 06 months for the COE Group trade of CNC
Programming-cum-Operator.
e. Rate of Stipend: During their one year/06 months training they will be paid stipend of Rs.1440/- or Rs.1240/- per month as the case may be. Page 2
3. (a) Applications may be submitted in the proforma sent herewith and application sent in any other form will not be accepted.

(b) The applications must be accompanied by the copies of relevant certificates (SSLC, ITI and Caste) in support of:-

(i) Date of Birth (ii) Educational/Technical Qualification (iii) In case of SC/ST/OBC candidates, caste certificate issued by the appropriate Revenue Authority (iv) Two Character & conduct Certificates issued from two Gazetted Officers, out of which one should be invariably from the Head of the Institution last studied.
4. The wards of serving as well as retired/deceased Railway Employees (Wards as per Pass Rules) may also submit their application directly to this office in the prescribed proforma duly enclosing a certificate to the effect that they are bona fide wards of serving/ retired/deceased Railway Employees.
5. The eligible applicants will be summoned for test/written test and will have to appear for the same at their own expense. The eligible candidates are advised to be in readiness to appear in the same at short notice for which a separate advise will be sent individually to the candidates.
6. Selected candidates will have to conform to the standards of Physical fitness, as prescribed for appointment as Trade Apprentices in the relevant trades. Medical standards will be relaxed for physically disabled.
7. Candidates selected for Apprenticeship will not be allowed to withdraw from the course except for reasons which are beyond their control. Before commencement of Apprenticeship, the candidates have to execute a contract of Apprenticeship, in the case of those who wilfully absent themselves, their contract of apprenticeship will be terminated and the training cost of an amount equivalent to his/her three months last drawn stipend shall be recoverable from such Apprentice or from his/her surety.
8. It should be noted that the recruitment and training of Apprentices will be strictly in compliance with the provisions of Apprenticeship Act 1961 and No Employment is Guaranteed to the Apprentices on completion of their training.
9. Every Apprentice who has completed the period of training will, on passing a test to be conducted by the National Council for Training in Vocational Trades to determine his proficiency in the designated trade in which he has served as an Apprentice, be
given a certificate of proficiency in the trade by the National Council.
10. The Apprentice shall abide by the other Rules and regulations framed by this administration from time to time.
11. The completed applications should be sent by post addressed to The Assistant Personnel Officer, Rail Wheel Factory, Yelahanka, Bangalore-106, so as to reach this office latest by 25.07.2010. The cover containing the application should be super scribed as “Application for undergoing training as Trade Apprentice”.

http://www.rwfindia.gov.in/pdf/perso...apprentice.pdf

[Guest]

iaml applying for my fitter app

[Guest]

WRIGHT NOW WORKING IN ALLEGRO CAPITAL ADVISIORS PVT LTD

[Guest]

SIR I DO ITI IN ELECTRICAL FROM PUNJABI. I SHOULD WANT APPLY APPRENTICE IN RAIL COTCH FACTORY

[Guest]

SIR I DO ITI IN RAC FROM Maharastra. I SHOULD WANT APPLY APPRENTICE IN RAIL COTCH FACTORY & i am give a job.

[Guest]

i want tonow more information about this

[kamal arya]

hi............ sir i'm kamal arya. i'm join in railway Apprentices cours Trade Fitter(iti) in railway wheel factory


KAMAL ARYA
JODHPUR
M.

[basudev bhattacharjee]

i am basudev bhattacharjee railway apprentices wheel factory

[Guest]

Sir, I Do ITI in RAC,& Diploma in Mechanical Eng. From Delhi
I Should Want apply job in Rail cotch Factory
CURRICULAM VITAE

Ashish Kumar Singh
E-Mail : Ashish_hvac AT yahoo.co.in
OBJECTIVE
- Seeking a Quality environment where the knowledge can be shared and enriched looking for an offer where I can give my best for the organization.

Working Experience
- Worked as a HVAC Technician in D.M.R.C. Delhi I.T.Park , Vipul Facility Pvt. Ltd & Johnson control (India) Pvt. Ltd From April 2005 To May2010
- Working as a Multi skill Technician/Supervisor in Reliance Delhi Airport Metro Express Line From June 2010 to August 2011.
- Now Working As a Ass. Engineer in Omaxe Ltd September 2011 to till date
Technical Qualification
- I.T.I. In Refrigeration & Air Conditioner from ( 2005 )
- Diploma in Mechanical Engineering from (2009)
Educational Qualification
- 10 Th &12 Th Passed from C.B.S.E. board
- Graduation from Kanpur University.
Computer Qualification
- Ms Word, Power point , MS Excel.
Job Profile
- H.V.A.C. System (Chiller plant ,AHU,FCU,Cooling Tower ,Primary Pump, Secondary Pump, Condenser Pump, Cooling Tower, Stair Pressure Fan, Ventilation Fan, Smoke Exhaust Fan ,Air Compressor up to 30HP), U.P.S. System up to 140 kva , Fire System , Fire Pump & Fire Extinguisher, D.G.Set & R.O. System ,Panel Operating ,S.T.P.System.

[Guest]

sir, I do ITI in COE group from Maharashtra I should want apply apprentice in cnc programming cum operator in rail coach factory

[Guest]

respected sir,
i want to know the whole details about the job information which is registered and posted by me on 16-11-2011.till i don,n receive the further information.so i respectfully requested you to send me the further information what to do.

[Guest]

My name is Yogesh Pradip Rehpade, age about 21 years, r/o 117 Onkar nagar, Manewada Road, Nagpur-27.
I am searching apprentice in Ordanance Factory, i want more information related with apprenticeship in Railaway & Ordnance factory.