Basic Design Engineer Singapore : Marine, Oil & Gas, Shipyard

[Carolynn]

Our Clients, is in Marine and Offshore Floating Production Conversions, Ship repair and conversion Petroleum Tankers, FPSO, Dredgers, Barges, Passenger and Cargo Vessels etc Specializes in the design and construction of offshore drilling rigs from shallow water to deep water and Industrial Power Plant, Pharmaceutical and Fine Chemical Plant Fabrication and Installation business.

They have proven track records in the building and servicing of jack-up rigs and semi-submersible rigs. And also executed a wide range of major projects involving Marine FPSO Conversion / Process Module Construction, Oil and Gas Industry.


Engineer (Basic Design)

Working Location : Singapore, West Area
Employment : Permanent Position
Benefit : Annual Leave , Bonuses ( 4-6 Months ) , Medical , Insurance etc.....

Duties : Basic design engineering work (structure / shipbuilding)

Requirements :
1. Degree in Structural Engineering or equivalent
2. Min. 3-4 years experience in offshore marine industry
3. Familiar with structural software, such as ANSYS, SACS ( is a MUST )

Note : Pleased forward resume in WORDS format, salary ( break down with other allow ), expected, notice period, reason for leaving , Photo.....

[Guest]

sir/madam,
I am a Mechanical Engineer pass out in the year 2009,i have also done PG Diploma in Piping Engineering. I would like to apply for the Design Engineer Post in your firm.
SREELAL S.
E-Mail: sreelalsreeni AT gmail.com , sreelal_sreeni AT rediffmail.com

Career Objective :
A career in Mechanical Engineering preferably Oil & Gas Industry that provides opportunities for personal and professional development as well as to contribute to the organisations effectiveness in order to take the company to the top position where ever I work.

Core Competencies :
- Proficient in preparing Isometrics.
- Pipe Rack Design.
- MTO preparation.
- Tank Farm Design
- Design of Distillation Column
- PT Rating
- Preparation of Valve Data Sheet.
- RF Pad Calculation
- Miter Bend Calculation.
- Preparation of Piping Material Specification
- Familiar with ASTM Nos.
- Knowledge of P&ID, Instrument Hookup etc.

Skill Sets :
- Ability to analyse problems/ issues logically.
- Learn and use new technologies fast.
- Willingness to shoulder new challenges and responsibilities.
- Good communicator and team player.
- Determinant and Tolerate.

Academia :
PG Diploma (Piping Engineering) - From Suvidya Institute of Technology, Santacruz, Mumbai in 2010.
BE (Mechanical) - From PGP College of Engineering and Technology, Namakkal in 2009. Affiliated to Anna University, Tamil Nadu. Marks Obtained 70%.
Plus Two -From PRMKHSS, Parad in 2005. Marks Obtained 74%.
SSLC -From JNGHSS, Mahe in 2003. Marks Obtained 74%.

Handling of codes and standards:
- ASME B 31.3
- ASME B16.34
- ASME B16.5
- OISD118
IT Forte
Applications : MS DOS, WINDOWS, C, C++
Softwares : Ceasar- II, AutoCAD, PROE, ANSYS, PDMS

Projects Completed :
Dissertation of the BE Mechanical Engineering Degree
“Design and Fabrication of Carbon Manufacturing Plant”
Project Duration: 45 days

Functional Description :
Design and fabrication of the working model of carbon manufacturing plant which produces activated carbon using cheaper raw materials like saw dust, coir pith, coconut shells etc. Activated carbon is a major cleansing agent used in industries.

Personal Dossier :
Date of Birth : 20th April 1988
Marital Status : Single
Nationality : Indian
Languages Known : English, Hindi, Malayalam [Regional], Tamil.

Declaration :
I hereby declare that the details furnished above are true to the best of my knowledge and belief
Place: Thalassery
Date: Signature
SREELAL S

[Guest]

SABARINATH.S
Email : s_nath_s AT yahoo.com

CAREER OBJECTIVE :
With ability of self learning, good written and oral communication skills and ability to work in multi cultural group, with preference to team goals over personal objective wish to work in your esteemed organization.

PERSONAL QUALIFICATION :
- B.Tech Degree in Mechanical Engineering (78% Agg. From Saint GITS college of Engineering Kottayam, Kerala) .
- I.S.C ( 80% Agg. From Bishop Moore Vidhyapith Kayamkulam, Kerala).
- I.C.S.C (74% Agg. From Bishop Moore Vidhyapith Kayamkulam, Kerala).

TRAINING / CERTIFICATION :
- AWS Certified Welding Inspector(CWI)-Certificate No : 09013581
- ASNT NDT Level II in R.T, U.T, M.P.T & P.T

OPERATING SYSTEM KNOWN :
- Windows XP Professional
- Windows 9x
- Windows vista

COMPUTER SKILLS AND SOFTWARE USED :
- MS-Word, MS-Excel, MS- Power Point
- Adobe Acrobat 8.0, Autodesk Auto CAD 2007 , Exposure to ProE , Ideas, Internet / E-Mail Etc

CAREER HISTORY :
- Present Employer : NASSER S.AL-HAJRI CORPORATION, Doha-Qatar.

Positions : WELDING QC / TESTING ENGINEER/ COMPLETION QC / DOCUMENTATION INCHARGE & MECHANICAL PLANNING & SCHEDULING ENGINEER.
- Project : Pearl GTL Project ( SHELL Project)
- Client : JGC Middle East FZE-Kellogg Brown and Root International Inc Joint Venture(JGC-KBR)
- Location : Rass laffan Industrial city, DOHA-QATAR
- Duration : From July 2008 to till Date
Duties & Responsibilities
- Welding inspection of various piping materials like carbon steel, LTCS, Copper Nickel, Alloy steel, stain less steel.
- Prepare Welding Procedure Specifications (WPS) in compliance with ASME Sec. IX, API 1104 and client’s specification.
- Prepare Welding Procedure Specifications (WPS) in compliance with ASME B31.3, ASME B 31.4 & ASME B31.8.
- Raising Technical queries for any technical issues and discussing with the clients to sort out the technical problems.
- Conduct Welding procedure qualification test as per proposed welding procedure specifications.
- Prepare Welding Procedure Specification (WPS) with relevant qualified PQR for the particular project.
- Perform Welder Qualification for various welding procedure specification as per ASME Section IX, API 1104, and relevant client’s specification.
- Welding Inspection of various piping materials like Carbon Steel, Low temperature Carbon Steel, Stainless Steel used in Petrochemical Industries as per ASME B 31.3 / 31.4 /31.8.
- Inspection of heavy structural fabrication.
- Prepration of hydrotest packages and mechanical/piping dossiers (both common dossiers & system dossiers)
- Final documentation handovering through dossiers.
- Documentation in charge for the project.
- Preparing and Implementing Inspection Test Plant and Method Statements for various activities involved in the construction of Oil & Gas facilities, Petrochemical Plant as per project specification & relevant International Standards.
- Incoming Inspection of various steel materials, consumables, tools and equipments etc. with relevant documents like Purchase Order, Material Test Certificates. If required, perform mechanical test and chemical analysis in order to confirm specification and relevant International Standards.
- Planning and Scheduling the Construction activities of SHELL’s Pearl GTL Off plot and Jetty project - QATAR.
- Supported the Discipline Elements of the Construction Planning, Scheduling and Cost Related Activities on behalf of the Project Controls Manager.
- Preparing Weekly & monthly Progress reports.
- Monitoring the Construction activities as per the scheduled process. Estimation of rates for additional works done by the company.
- Constantly monitoring the progress of the work on a manhours basis.
- Preparation of monthly invoices based on the achieved progress.
- Organization : NASSER S.AL-HAJRI CORPORATION, Doha-Qatar

- Position : Jr. Engg. Mechanical
- Project : Ras Gas Common Off plot Project
- Client : Fluor Middle East.
- Location : Ras laffan Industrial city, DOHA-QATAR
- Duration : From Dec 2007 to July 2008
Duties & Responsibilities :
- Incoming Inspection of various steel materials, consumables, tools and equipments etc. with relevant documents like Purchase Order, Material Test Certificates. If required, perform mechanical test and chemical analysis in order to confirm specification and relevant International StandardsProcess day-to-day office correspondence and maintain records of the same.
- Interpretation of Radiographic films and NDT reports.
- Witnessing of hydro test for both on-plot / off-plot piping.
- Witnessing punch list action points and submission of final dossier.
- Welding Process defect analysis, welding performance evaluation and finding solution for corrective actions.
- Raising Technical queries for any technical issues and discussing with the clients to sort out the technical problems.
- Updating calibration and documenting certificate of inspection, measuring and test instruments / equipments etc.
- Establishing Schedule and Cost Control procedures and the associated computer integrated systems to support the controls.

PROJECT DONE :
- Title : Design & Analysis of Body-flap Actuator Bracket . (2006 Nov -2007 Mar)
- Organization : Vikram Sarabhai Space Center (V.S.S.C) Trivandrum.

VOLUNTEER EXPERIENCE :
Volunteered in Organizing Committee in Mechnius-01 (A national level technical symposium) as joint convener conducted by the Department of Mechanical Engineering of Saint Gits College of Engineering, Kottayam.

PERSONAL DETAILS :
Date of Birth : 15-05-1986
Nationality : Indian
Marital Status : Single
Linguistic Ability : English, Hindi, Tamil and Malayalam

HOBBIES:
Being with friends and relatives, traveling and driving, playing cricket, table tennis,playing violin.

PERSONAL ATTRIBUTES:
- Work extremely both as independent and effective team player.
- Capable to adapt to New Situations and Environments.
- Ability to work under pressure and possesses a “Can Do” Attitude.
- Superlative communication and team-building skills.
- Willingness to Work Hard, Co-Operative and Enthusiastic.

Declaration:
I do hereby solemnly declare that all the above information furnished is correct to the best of my knowledge and belief.
Place : Doha, Qatar.
Date 25-10-2010
Sabari Nath . S

[Guest]

CURICULUM VITAE
Name : Agus Taryono

1. Education :
a. Technical High School, graduated at 1975
b. Institute Technology of Surabaya, Naval Architect Faculty, graduated at 1982
c. Indonesian University, Magister of Manufacturing Technology, graduated at 1995

2. Certificates :
a. SCUBA DIVER A3, 1980
b. WELDING INSPECTOR, BKI/LR/Indonesia Ministry of Labor, 1990
c. SHIP BUILDING TECHONOLGY of Japan’s MITI and MITSUI SOZEN – TAMANO WORKS, 1986
d. SHIP BUILDING MANAGEMENT of MITSUI SOZEN – CHIBA WORKS, 1991

3. Training :
a. Planning and Maintenance System of Weight Handling Equipment, US NAVY-Subic base, in PT PAL INDONESIA at 1983
b. SHIPBUILDING TECHNOLOGY, in MITSUI SOZEN-Tamano Works at 1986
c. WELDING INSPECTOR, PT PAL/BKI/LR/Indonesia Ministry of Labor, in PT PAL at 1990
d. SHIPBUILDING MANAGEMENT SYSTEM, in MITSUI SOZEN-Chiba Works at 1991
e. Personal Attitude Training (out bond Training) by Indonesian Human Resource Development, at 1996
f. Investment Management, Stanley Adams at 1997

4. On hand Work experiences :
a. PT GRUNO NASIONAL - METAL FOUNDRY & MACHINERIES, since 1975 to 1977.
b. PT BKI, Non Class Matter Division as Marine Surveyor, since 1982 to 1983
c. PT PAL INDONESIA, Merchant Ship Division, Last position as Chief of Bureau Production Engineering, since 1983 to 1996, experienced in
i. Ship building Management system of,
1. Production control system of PT PAL - 30,000 dwt NEW BUILDING PLANT
2. Working standard of PT PAL - 30,000 dwt NEW BUILDING PLANT
a. Steel fabrication/treatment
b. Assembly
c. Welding
d. Erection
e. Outfitting
f. Machinery
ii. New building and project supervision of :
1. MARUTA JAYA, SOLAR SHIP EXPERIMENTAL, AT 1980
a. 900 DWT &
b. 24 M SAILING CONSTRUCTION EXPERIMENTAL
2. FLOATING DOCK 20,000 TLC, OWNED BY PT PAL, AT 1982
3. PERTAMINA TANKER, MT MINAS & MT. MELAHIN 6500 DWT SERIES, AT 1983.
4. CARAKA JAYA, OWNED BY PT PANN MULTIFINANCE, AT 1985
a. 3,500 DWT SERIES
b. 6,500 DWT SERIES
5. HARBOUR TUG, 3,000 BHP SERIES, OWNED BY PT PELINDO, AT 1986
a. TB. ANOMAN
b. TB. ANGGODO
6. CONTAINER CARRIER, 500 TEU’S, OWNED BY PT PANN MULTIFINANCE, AT 1988,
a. PALWO BUWONO SERIES
7. PERTAMINA TANKER, 17,500 DWT SERIES, AT 1990
d. PT KRAKATAU BANDAR SAMUDERA a subsidiary Coy of PT KRAKATAU STEEL as Engineering/Heavy Equipment Manager, since 1996 to 1998
e. Technical appraisal consultant of PT DISTRINDO PERDANA KONSULTAN JAKARTA for INDONESIAN BANKING RESTRUCTURING AGENCY, since 1998 to 2000.
f. Hired Employment as Technical Advisor/Project Supervisor of Project based of PT MEGA GUNA GANDA SEMESTA for New building LCU owned TNI-AD BENG-ANG
1. 1 x LCU 300 DWT and
2. 2 x LCU 500 DWT
Building yard at PT PALMA PROGRESS SHIPYARD-BATAM since 2002 to 2004
g. Hired Employment as Technical Advisor/Project coordinator of Project based of PT MEGA GUNA GANDA SEMESTA for New building 1 x POLICE FAST PATROL BOAT, A TYPE 40 METER LENGTH owned by DITPOLAIR Building yard at PT PALMA PROGRESS SHIPYARD-BATAM since 2002 to 2004
h. Hired Technical assistant of PT CAPUTRA SHIPYARD-BANTEN and SINA MARINE PTE, SINGAPORE for Design and Engineering of ALUMINIUM FAST PATROL BOAT 18 M-LNG BADAK at 2006.
i. Other
i. Project proposal and design for COAL TRANSSHIPMENT VESSEL for HUMPUSS INTERMODA JAKARTA and PT SINAR BAJA ENGINEERING- SURABAYA at 2006.
ii. Project proposal and design for CREW BOAT ALUMUNIUM 26 PAX for TOTAL INDONESIE BALIKPAPAN and LOCAL COMPANY at 2007.
iii. Project proposal and design for BUSINESS PLAN of COAL HANDLING SYSTEM for PT BA and PT CAHAYA SAMUDRA ABADI-PALEMBANG at 2007.
j. Hired Technical/engineering assistant of PT CAPUTRA SHIPYARD-BANTEN for NEW BUILDING OF 2 UNIT DRILLING/WORK BARGE OF PT ELNUSA WELL SERVICE, since July 2007 to date

5. Overseas Assignment :
a. Mitsui Sozen-Tamano-Japan as traine, since July 1986 to November 1986
b. Mitsui Sozen-Chiba-Japan as traine, since July 1986 to September 1986
c. European Wind Tunnel – Koln, Germany for Project study excursion of Indonesian Wind Speed Tunnel at November 1993
d. SVERDRUPP-Chicago/Tennesse-USA for Project discussion of Indonesian Wind Speed Tunnel at November 1993
e. ASIAN TRACTOR BULK-Port Klang-Malaysia for Project Study of Steel Scrap Handling System of PT KRAKATAU BANDAR SAMUDERA at February 1996

6. Computer Literacy :
a. MS OFFICE
b. MS PROJECT, for
i. Shipbuilding Project and
ii. Management
c. Mechanical CAD
i. SHIP DESIGN
ii. ENGINEERING/MECHANICAL DESIGN
d. MAXSURF SHIP DESIGN
e. SAP 2000, structure
f. DYNAMIC MANAGEMENT SIMULATION

7. Language Capability :
a. English, active
b. Japanese, Passive
SURABAYA, Wednesday, August 17, 2011
Ir. Agus Taryono, MSc

[Unregistered]

CURICULUM VITAE
NAME : MR. MOHAMAD ZAFFIRE B. ANIF
NATIONALITY : SINGAPOREAN.
AGE : 44 yrs.
D.O.B. : 30TH of JUNE 1968.
RACE : MALAY. RELG. : MUSLIM.
MARITAL STATUS : MARRIED.

EDUCATIONAL QUALIFICATIONS :
NAME OF SCHOOLS FROM / TO HIGHEST QUALIFICATIONS :
SANG NILA UTAMA SEC. SCH. 1982 - 1982 GCE 'N' & 'O' LEVELS
ITE. JURONG 1992 NTC MARINE MECHANIC
NATIONAL MARITIME ACADEMY 1993 WATCHKEEPING ENGINEER COURSE
SINGAPORE POLYTECHNIC 1998 ADVANCE DIPLOMA IN MARINE ENGINEERING

OTHER CERTIFICATES :
CERTIFICATE OF COMPETENCY CLASS (5) MARINE ENGINEER
FIRE FIGHTING COURSE
PROFICIENCY IN SURVIVAL CRAFT
TANKER FAMILIARIZATION COURSE : OIL / CHEMICAL / GAS
DOCUMENTS TO SERVE AS AN OFFICER ON TANKER
TESTIMONIALS
SAFETY INSTRUCTION COURSE for SHIPREPAIR MANAGERS

COMPUTER LITERACY :
MICROSOFT WORD
MICROSOFT EXCEL
MICROSOFT PROJECT

EMPLOYMENT HISTORY :
C0MPANY POST HELD FROM / TO :
NEPTUNE SHIPMANAGEMENT PTE. LTD. MARINE ENGINEER 1994 - 1997
NORTH SHIPYARD SERV. POTE. LTD. SHIPREPAIR MANAGER 1999 - 2001
P.T. TUNAS KARYA BAHARI INDONESIA YARD MANAGER 2001 - 2004
P.T. PAN UNITED SHIPYARD INDONESIA PROJECT SUPERINTENDENT 2004 - 2006
P.T. UNI-MARINE PACIFIC SHIPYARD PROJECT / PROD. MANAGER 2006 - 2007
P.T. ASL MARINE INDONESIA PROJECT MANAGER(SHIPREPAIR) 2008 - 2012

NATIONAL SERVICE :
SINGAPORE POLICE FORCE YEAR
SPECIAL CONSTABLE 1987 - 1989

NATURE OF WORK AND RESPONSIBILITIES :
HAVING THE KNOWLEDGE AND EXPERIENCES IN DOING MAINTENANCE WORK ON ALL MACHINERIES AND EQUIPMENTS ONBOARD VESSELS'. CARRYING OUT REPAIR WORKS ON VARIOUS TYPES OF VESSELS TO MEET THE SCHEDULE. TO OVERALL IN-CHARGE ON THE YARDS' FACILITIES AND LAUNCHING OF VESSELS. ATTENDING TO OWNER AND CLASS FOR THE REPAIR AND NEWLY BUILD VESSELS. ALSO TAKING FULL RESPONSIBILITIES ON THE NEWLY BUILD U.T. DESIGN VESSELS, SPB, SDB AND ACCOMMODATION WORK BARGES BY MEETING THE DELIVERY SCHEDULE. FULLY IN-CHARGED OF VESSELS CONVERSION PROJECT (FSO/FPSO)

SINCERELY YOURS
MD. ZAFFIRE