NDT TECHNICIAN : SINGAPORE OIL AND GAS COMPANY

[sai6265]

NDT TECHNICIANS WITH EXPERIENCE IN MAGNETIC & PENETRANT TESTING.CERTIFICATE IN NDT WITH UK STANDARD IS REQUIRED.SEND YOUR RESUME AND CERTIFICATES TO suresh_nivasrealworld@yahoo.com or Call 9894410026

[Guest]

CURRICULUM VITAE OF Jafarrullah

Summary :
Having over 13 years experience in the field of Quality Non Destructive Testing mostly in Ultrasonic, Quality Control, Inspection .
Email : mibrahimjafar AT gmail.com
royaljafar27 AT gmail.com

Education :
Qualification : B.Sc Physics
Technical qualification : Diploma in computer science
Hardware & Software - Block – 10, Neyveli.
Passport details :
Passport Number : G 0798676
Date of expiry : 01.02.2017

Professional Qualifications and Certifications :
- TOFD & PHASED ARRAY (Company Sponsered, NDT & CCS certified).
- NDE Certification UT on TKY as per API RP-2X- Level II ( American society for NDT)
- CSWIP 3.1-Welding Inspection (waiting for result)
- Holder of Saudi Aramco Radiation Safety Card.
- India Driving Licence – LMV
- DL.No. TN45 20070016723, Exp. Date-08/09/2014
- : ASNT Level II in;
- Ultrasonic testing
- Radiographic testing
- Magnetic particle testing
- Liquid penetrant testing
PCN : Ultrasonic testing 3.1 PCN No: 310567
: Ultrasonic testing 3.2 (waiting for result)

CODES & STDS OF PRACTICE :
Familiar with international codes such as ASME SEC V, ASME SEC VIII Div1,
ASMESEC IX, AWSD1.1, API 1104, ASME B 31.1, BS, CC 2235-9, ASME B 31.3,
ASMEB31.4, ASME B 31.8 & API 650, 510, PD 5500, ASTM & DIN
Equipment Handled
- Radiographic Testing - Ir 192, Isotopes with Tech – Ops, Rolli -1.
- Magnetic Particle Testing - Magnaport, Magna flux, AC & DC Yoke.
- Liquid Penetrant Testing - Penetrant Testing Solvent, Washable Method.
- Ultrasonic Testing - Epoch Xt, Panametrics, Kraut Kramer,
USM25, USM35

Project : Petro Rabigh Refinery & Petrocmemical Plant,
Rabigh, Saudi Arbia, K S A.
Shutdown April- 2011 - June- 201 1
Company : Gulf Quality Control Company , Saudi Arabia.
Designation : NDT Inspector
Nature of work : Carried out Ultrasonic thickness measurement of pipe lines and equipments. Then corrosion check on pressure vessels. Tank exchanger column etc., Lamination check of raw materials.
1. Top survey of pipe line thickness, weld scan of vessels and pipe lines.
2. Ultrasonic testing of pressure vessels, Towers, Drums and Exchangers
3. Carried out extensive Welding inspection and UT scanning and positive metal inspection (PMI).and various types of NDT like visible dye penetrant, wet fluorescent magnetic particle inspection on reactors, vessels, pipe lines
- Carried out Penetrant inspection on weld joints equipment, Drums, Towers, Exchangers surseam & Longseam weld and Nozzles.

Project : TAKREER (Abu Dhabi Refinery Plant )
Shutdown October 2010 – November 2010
Company Velosi Certification Company LLC, Abu Dhabi.
Designation : NDT Inspector
Nature of work : 1.Top survey of pipe line thickness, weld scan of vessels
And pipe lines.
2.MT,PT of vessels,columns and Exchangers.
3.Visual Inspection of vessels,columns,supports,Excha-
ngers.
4.Ultrasonic testing of pressure vessels, columns and
Exchangers
- Carried out magnetic particle inspection on socket weld, nozzle weld, Butt weld, fillet weld and Inspection on machined components by using different methods like a wet method. Dry method and fluorescent method using Yoke and prod methods.
- Carried out Penetrant inspection on weld joints equipment, components such as extension bellows, pump casing, shaft etc.

Project : RAS GAS, Qatar (shutdown April 2010-July 2010)
Oil & Gas Plant
Company Salam RBG International Company, Qatar.
Designation : NDT INSPECTOR
Nature of work : 1.Top survey of pipe line thickness, weld scan of vessels
And pipe lines.
2.MT,PT of vessels,columns and Exchangers.
3.Visual Inspection of vessels,columns,supports,Excha-
ngers.
4.Ultrasonic testing of pressure vessels, columns and
Exchangers

Company : Chennai Petroleum Corporation Ltd.
Duration : Oct’ 2009 to Feb‘ 2010
Designation : NDT SUPERVISOR & TECHNICIAN
Company : NDT & CCS, Saudi Arabia
Duration : June 2007 to Aug. 2009
Designation : NDT /QC INSPECTOR
Nature of work : 1. Consolidated contractors company (CCC) Projects
in KGP and KGF.
2. UT and TOFD Technician worked as Sabic Projects.
3. Worked as UT (Shear Wave), TKY and Structural
Weld Scan technician in Zamil Steel Kayan Projects, Chemlon Projects and Marafiq (Power and Water Utility Company ) in Yanbu.
4.Ensuring stage wise Inspection as per ITP.
5.Following pre commission activities.

Organization : NAGARJUNA FERTILIZERS
Duration : May 2007 to Aug’ 2007
Project : Shut Down
Designation : NDT INSPECTOR
Company : Dolphin Offshore, Mumbai.
Duration : Jan ‘ 2007 – Apr’ 2007
Project : PRP Project
ONGC Platforms at Bombay High Oil Field
Larsen Toubro Ltd.
Designation : NDT INSPECTOR
- Performed detailed inspection of cold and hot insulation during installation and refitting after inspection.
- Inspection of rotating equipments such as pumps, compressors and turbine blades, for internal corrosion and stress induced cracks in addition to above vibration monitoring of rating equipments with rotating maintenance team
- Visual and MPI inspection of handling tools in rig floor, crown block assembly, traveling block, mud pump, and mud tank.UT and RT inspection of kill line choke line and stand pipes.
- Inspection of materials such as pipes, valves, bolts, Nuts and studs.
- Carried out extensive Welding inspection and UT scanning and positive metal inspection (PMI).and various types of NDT like visible dye penetrant, wet fluorescent magnetic particle inspection on reactors, vessels, pipe lines
Company : GB NDT Engineering Services,
Thuvakudi, Trichy – 15.
Duration : Dec’ 1998 to Dec ‘2006
Designation : Multidiscipline Technician
Total Experience : 10 +yrs
JOB HANDLED :
- Review of Material test certificate for plates, pipes and fittings.
- Witnessing for PT,MT Activity and PWHT.
- Boiler Drums, Safety valve nozzles, water wall panel, pipe ducts.
- Visual Inspection carried out Pressure Vessel,Exchangers,Coloums.
- Door frames, Raw material plates, Rods, and Rings, Flanges.
- Conical / Tubular / Polygon Towers, Shell to Flanges, R & D Jobs.
- Lifting jigs, Steam Drums, Crane Beams, Crane supports.
- TKY Joints, Elbows, Columns, Chemical Storage tanks.
- Load Spreading plates, Shabows, Tungsten Penetrator Rods.
- Heavy pressure steam lines, pressure vessels, fuel and oil lines.
- Water expansion storage, tanks, pipe thickness checking.
- Corrosion, erosion thickness gauge measurement in piping.
- MPT, DPT and Radiographic Testing in pipe lines, pressure vessels and Boilers including preparation of Isometric Drawing / Reporting.
Jobs assigned :
- Carried out Ultrasonic thickness measurement of pipe lines and equipments. Then corrosion check on pressure vessels. Tank exchanger column etc., Lamination check of raw materials.
- Carried out Radiography Technique for find out deposits and corrosion checks in pipelines and equipment weld joints Inspections in Plant and Fabrication shop.
- Good experience in film processing and interpretation of films for weld defects and corrosion analysis and deposits check.
- Carried out magnetic particle inspection on socket weld, nozzle weld, Butt weld, fillet weld and Inspection on machined components by using different methods like a wet method. Dry method and fluorescent method using Yoke and prod methods.
- Carried out Penetrant inspection on weld joints equipment, components such as extension bellows, pump casing, shaft etc.

[Guest]

MANGESH KOR
Production & Project Planning Engineer
(Total experience 04 year)
E-MAIL :- mangesh27 AT yahoo.co.in

CAREER OBJECTIVE :
Seeking for a position where I would visualize my career that is challenging in an innovative and competitive world so as to become a successful professional.

PRODUCTION/PRODUCTION PLANNING AND CONTROL :
Advance production planning with pro-active approach in all aspect of production system/supply/ planning within large multi-product environment.
Particular strength and experience with in planning and control of production as well as inventory.
Establishing new control system, minimize production loses and reducing the down time, now continue contribution with a similar position in company.

AREA OF EXPERTISE :
- Production Supply chain management Team leadership/Supervisor
- Manpower planning Meeting Employees training
- Waste reduction Inventory control Solving problem

MAJOR STRENGTH :
- Ability to effectively interact with members at all levels of the organization.
- Flexible to different kind of work environment.
- Willingness to learn and work hard.
- Professional and energetic.

PROFESSIONAL EXPERIENCE (II) (01 YEAR) :
Organization : KEVIN Enterprises Industries (India) PVT LTD ambernaath(E).
DEPARTMENT : PRODUCTION PLANNING
Designation : Production Planning Engineer
Duration : MAY 2010 to till Date
Company profile :
KEVIN ENTERPRISES INDUSTRIES PVT LTD
Design & Fabrication of Mass Transfer Equipment-Products
Our company KEVIN ENTERPRISES INDIA PVT. Ltd.' Is ISO 9001-2008 Certified.
Manufacturing Mass Transfer Equipments for petrochemical & chemical processing industries & Company having a design center & fully equipped CNC punch-press, press shop, Tool room, and all sheet metal processing machinery.
Our product range covers the wide range of INTERNAL towers Equipment for mass transfer product.
We Supply our product to HMEL, SAMSUNG, TOYO, GODREJ, PIDILIGHT, INDIAN OIL, HPCL, UOP EXXONMOBIL(USA),IDEMITSU(JAPAN),JSC ACRON(RUSSIA),OMIFCO (OMAN),SINGAPORE SYNGAS,U.T.E (SPAIN) And other manufacturer.
- Job Profile & Responsibilities :-
- Drawing & preparing of bill of material (BOM)
- Calculating shortages of material to facilitate supply chain to procure items on time
- Level loads OR Arrange Raw Material for shop floor (Production)
- Preparing monthly fabrication plan
- Daily review with internal suppliers & supply chain
- Monitoring overall progress for on going job & reporting it to management.
- Communicate in a timely manner with colleagues in Planning and other departments, e.g. Sales, Engineering, Production and Quality to highlight potential/ actual bottleneck to ensure on time delivery to the customer
- Tracking of order executions from bumper to bumper once orders are received in plant.
- Updating order status to customers & Sales on regular basis
- Use & review of current systems & to suggest improvements to make them more effective.
- To resolve day-to-day issues related to order execution by Verbal & written communication.
- Shop Floor loading on daily basis keeping optimum utilization of resources in mind
- Analysis of On time Delivery & Lead Time metric & strive for continuous improvements in these Ares
- Review of Finish goods on daily basis to understand & resolve issues related to inventory levels.
- Maintain QS document and record.

Standard Working procedure and Activities :-
- After received Work order Check CDD and shipping address.
- With using Planning Drawing Make Bill Of Material (BOM)
- As per BOM make material reservation sheet & send it to STORE dept.
- Given confirmation of STORE Dept Send PR COPY of balance material to purchase Dept.
- Raw materials follow up with Purchase Dept.
- After received Raw material to coordinate with store dept and reserved material according Work order
- Coordinate with Quality dept for identification of RAW MATERIAL.
- To issue Raw material to PRODUCTION department as per our CDD OR Monthly production plan
- To using SHOP DETAILS Drawing Calculate box size and send it this PR to Purchase dept.
- After receiving Wooden Boxes identify & pack material as per size and shape.
- Make weekly dispatched plan and send this copy to dispatched department.
- Make packing list and send copy to Dispatched department.

PROFESSIONAL EXPERIENCE (I) (03 YEAR) :
Organization : Kruger Ventilation Industries (India) PVT LTD
DEPARTMENT : PRODUCTION PLANNING
Designation : Production Planning Engineer
Duration : May 2007 to May 2010
Company profile :
“Kruger Ventilation Industries (India) Pvt. Ltd.” Branch of Kruger Group MNC, Singapore
We would like to introduce ourselves as the manufacturer & supplier of Industrial Fans & Blowers in HVAC, Heating Ventilation & Air Conditioning Industry of KRUGER make.
Our company 'Kruger Ventilation Industries (India) Pvt. Ltd.' is member of the group companies of 'Kruger Ventilation Industries Pvt. Ltd., Singapore is ISO 9001-2000 Certified.
Our product range covers the wide range of Centrifugal, Axial and Inline type fans Our Centrifugal range of Fans is certified by Air Movement & Control Association (AMCA) USA for both Sound & Air Performance.
We Supply those fans to BLUE STAR, VOLTAS, NUTECH, CLIVET ENGG, SUVIDHA, VINAIR TECH, VINDAIR, DJK INDUSTRIES, ZECO, WAVES, AMBIENCE, AM CLEAN TECHKNOLOGY and Other AHU Manufacture.
- Job Profile & Responsibilities :-
- Production planning and control together with raw material procurement and customer req’ment
- Production planning and control with customer handling
- Develop schedule system formulated production plan that optimised output against service target.
- Chair daily planning meeting to analyse manufacturing and material availability against customer demand and priority.
- Identify market requirement and make stream line plan according this.
- Co-ordinate with customer for give priority to product.
- Co-ordinate with sales team for execute product without failure and delay.
- Co-ordinate internal dept like quality, purchase, sales for product improvement.
- Continuous monitoring in process and final product activities to improve production and reducing production losses.
- Ensuring proper identification storage handling material in shop floor.
- Maximum productions run as per production capacity.
- Preparation of preventative maintenance schedule.
- Managing team of qualified technicians to achieve production target.
- Planning and scheduling operational activities for attaining the monthly production target and tracking progress against target by analyzing daily report.
- To maintain inventory level in control to reduce cost and material handling.
- Co-ordinate with commercial dept to make effective production plan.
- To look after proper house keeping.
- Collect all daily, weekly and monthly production figure Model wise and value wise and submit to plant manager.
- Standard Working procedure and Activities :-
- After Received PO Check billing address and shipping address, payment terms, taxes, required Delivery date and transportation etc and punch this order in MASTER OPERATION SHEET.
- To check material status with store & send Purchase order copy of Purchase Dept.
- Purchase Dept sends OCS (order commitment status) for same.
- As per OCS make tentative production plan in MASTER PRODUCTION SHEET.
- Make monthly production plan as per PROJECTS /ORDERS.
- Make weekly production plan according monthly plan.
- Issuing daily component MRN (material requisition note) to store dept for processing material as per plan.
- Make daily production report in soft copy
- Send monthly production report model wise and value wise to plant incharge.
- Co-ordinate with customer regarding delivery of Product.
- Send weekly dispatch plan to Dispatch department according Production and Customer requirement.

M/C UTILIZE IN PRODUCTION :
- Shearing Machine
- CNC Punching Machine
- Bending Machine
- LATHE Machine
- Band saw M/C
- Punching Press/ Welding M/C. (ARC) (MIG)

Educational Qualifications :
MUMBAI BOARD (MAHARASHTRA)
Diploma in Mechanical Engineering Year- 2007
Aggregate 65 %
Appear B.TECH (Mechanical) (VII SEM) CORESPONDANCE

SOFTWARE SKILL :
- AUTOCAD-2007
- MS-OFFICE
- Handling ERP System for internal communication.
COMPUTER SKILL :
Windows, MS-Office
- Making & Updating Daily or Monthly Basic Report on Excel Worksheet.

TECHNICAL SKILS & STRENGTH :
- CAD Knowledge
- Good communication skill
- Positive approach
- Systematic approach to any situation
INDUSTRIAL TRAINING :
- Training Undergone : - Training in Kruger Ventilation Industries for handle manpower.
- Industries of QMS (Quality management system)

[Guest]

SUKESH

- sukeshsugumaran AT gmail.com
CAREER OBJECTIVE
To build and develop a career in the field of systems/chemical Technology and strive for excellence in the same by maintaining consistency in my performance and to contribute towards the development of orginisation, society for next generation with the knowledge attained.
EMPLOYMENT SUMMARY :
Executive with Biocon Limited
- Co-ordinate with all maintenance Department.
- Hands-On Knowledge and Expertise in handling Equipments like (Distillation column,crystallizer,fludisation beds, Blending vessel, Reactors ,Dryer)
- support shift supervisor in handling plant commissioning ,startup, shutdown and production activities
- Ensure Batch and documenting in process control and handling raw material for production activities
- Handling work environment, health and safety activities
ACADEMIC DETAILS :
Bachelor of Biotechnology [B.Tech]
Year of Completion : March 2008
Percentage : 70%
College : Kumaraguru College of Technology, Coimbatore
University : Anna University
Dipoloma in Petro chemical Technology [DPEC, chemical Engineering]
Year of Completion : March 2005
Percentage : 82%
College : Nandha polytechnic college, Erode
University : Anna University
Higher Secondary Course [Mathematics, Biology]
Year of Completion : March 2003
Percentage : 70%
School : Scott Christian Hr Sec School, Nagercoil
Board : Board of Higher Secondary Education, Tamil Nadu

Secondary School Leaving Certificate [S.S.L.C.]
Year of Completion : March 2001
Percentage : 61%
School : S.A.marticulation Hr sec School, kuzhithurai
Board : Marticulation.

EMPLOYMENT HISTORY :
Organization : Biocon Limited (Bangalore)
Achievements : Appointed as a junior Executive and got promoted as Executive in production Department.
Role : Executive (Since 4th Aug 2008)
Responsibilities :

- Ensure Batch and documenting in process control and handling raw material for production activities
- Perform routine field sampling for lab analysis.
- Parameter controlling through DCS &PLC
- Perform material handling duties including Forklift driving
- Handling of various type of valves
- Involved in all kinds of maintenance job & housekeeping.
- Co – ordinate with quality control and maintenance department
- Participating in emergency response team activities
- Handling work environment, health and safety activities
- Attained internal training program in safety & fire fighting.
- Normal operation &trouble shooting of all equipment.
- Isolation and handling over the equipment for maintenance safety.
- Condition and monitoring of rotary equipment.
- Executing all kinds of field operations.
- Leadership quality.
- Handling various hazardous chemicals.
EQUIPMENT HANDLE :

- Distillation column,crystallizer,fludisation beds, Blending vessel, Reactors ,Dryer
- Heat Exchanger (condenser,cooler,Heater,)
- Pumps (centrifugal,gear,diaphragm,screw pump)
- Vacuum Application (steam Jet Ejector, oil vacuum pump)
- Sieve shaker, Filter
ACHIEVEMENTS
- Scored state first in “Petrochemical technology”.
- Won Third place in paper presentation held in Periyar Maniammai College of Engineering, Thanjur.
- Won silver medal in weight lifting (college intramurals).
PERSONAL STRENGTHS
- Optimistic, Team Player.
- Willingness to learn and to adapt.
- Possess good analytical, communication, interpersonal & presentation skill.
- Good team player and capable of handling large and complex assignments.
- Ability to work as part of Global Implementation Team.
COMPUTER PROFICIENCY :
- Basic knowledge in computer and Internet operations.
- Good knowledge in MS-Office.
HOBBIES
- Playing Cricket, Chess, Caroms.
- Listening to music.

[Guest]

CURRICULUM- VITAE
S.SAMI AHAMED

E-mail ID : samiahamed90 AT gmail.com

OBJECTIVE
To get an opportunity in a reputed organization to provide a meaningful contribution for the growth of the company that provides me a good career.
STRENGTH
- Ability to work in team
- Ability to learn quickly. Hardworking and punctual
- Self-disciplined and goal-Oriented
ACADEMIC DETAILS
Degree University/Board Percentage Year of Passing
B.Sc.(physics) Jamal Mohamed College 80% 2009
H.S.S Khajamian Higher secondary school 56% 2006
S.S.L.C Ponniah Higher Secondary School 73% 2004
TECHNICAL SKILLS
INSTITUTE : GB NDT ENGINEERING SERVICE (RT, UT, PT, MT)
AL-MOHAMMADIAN INSTITUTE OF TECHNOLOGIES(AIT)[UT TRAINING]
NDT-(Non Destructive Testing) Level II (RT, UT, PT, MT)
- RT- (Radiography Testing)
- UT-(Ultrasonic Testing)
- PT-( Dye Penetrant Testing)
- MT-(Magnetic particle Testing)
PROFESSIONAL EXPERIENCE
EXPERIENCE -- I
COMPANY NAME : GB ENGINEERING.
PROJECT DONE FOR : BHEL.
TYPE OF PROJECT : COIL, HEADERS&PIPES
METHOD USED TO INSPECT : RADIOGRAPHY TESTING (RT)
DESIGNATION : Quality control supervisor cum NDT Technician
DURATION : FROM: 05-MAY-2009 TO: 10-APIRL-2010
EXPREIENCE--II.
COMPANY NAME : HARIHAR ALLOYS&FORGING (P) Ltd.
PROJECT DONE FOR : SINGAPORE (VECCOGRAY), GERMAN (SHCUKUINDIA), CHENNAI (ADCO INDIA),
TYPE OF PROJECT : Bonnet, Flange & Valve body (Alloys & Forging)
METHOD USED TO INSPECT : ULTRASONIC TESTING (UT)
: MAGNETIC PARTICLE TESTING (MT) : LIQUID DYE PENETRATING TESTING (LPT)
DESIGNATION : Quality control supervisor cum NDT Technician.
DURATION : FROM: 02-MAY-2010 TO: TILL-DATE

TECHNICAL QUALIFICATION
Course Institute Grade
DIT(Diploma in information technology) CCI computer education, Trichy. A+
C,C++
Soft and soft computer education, Trichy. A

[Guest]

RESUME

G. Vasanthan
Email ID; g.vasanth12 AT gmail.com

OBJECTIVE
To take up a challenging position in the developing organization which bring out best in me, to prove my ability and to showcase my talent which intern help me to build a sound career.

EDUCATIONAL QUALIFICATION :
- Diploma in Mechanical Engineering with 85.29% First Class with Honours in 2009
(Karaikal polytechnic college – Karaikal, State Board of Technical Education and Training)
- Higher Secondary School with 71.83% in 2005
(GOVT HSC SCHOOL Thavalakuppam Pondicherry, State Board)
- High School with 64.80% in 2003
(GOVT HSC SCHOOL Thavalakuppam Pondicherry, State Board)
SINGAPORE COURSES :
- Shipyard Supervisors Safety Course – Singapore
- Welding -3G SMAW 12.7mm
ADDITIONAL QUALIFICATION :
AMERICAN SOCIETY OF NONDESTRUCTIVE TESTING (ASNT) Level – II
- Ultra Sonic Testing (UT)
- Radiography Testing (RT)
- Magnetic Particle Testing (MPT)
- Penetrate Testing (PT)
PROFESSIONAL EXPERIENCE :
- TECH-SHARP ENGINEERS PTE LTD
Period : May2009 to April2010
Location : Kalpakkam, India
Position Held : Mechanical Maintenance Technician
(Undertaking for Maintenance, Service and Repair then Preventive, Scheduled and Breakdown maintenance for Pipe line, Boiler, Hydraulic equipments crane, earthmover, forklift, etc.
- DUNDEE MARINE INDUSTRIAL & SERVICE PTE LTD
Period : April 2010 to March 2011
Location : Singapore
Position Held : Mechanical Maintenance Supervisor
(Undertaking for Ship Maintenance, Service and Repair for Main Engine, Ship Hydraulic equipments and pump, centralized pitch propeller, etc.
- TECH-SHARP ENGINEERS PTE LTD
Period : April 2011to till date
Location : Kalpakkam, India
Position Held : Mechanical Maintenance Supervisor
(Undertaking for Maintenance, Service and Repair then Preventive , Scheduled and Breakdown maintenance for Pipe line, Boiler, Hydraulic equipments crane, earthmover, forklift, etc.
SOFTWARE SKILL :
- CATIA P3 V5R15(3D Modeling Software) (Part design, Wire frame, Sheet metal design, Assembly design, Drafting)
- Auto Cad 2007
- Operating systems known Windows XP
- Type writing
PROJECT DETAILS :
Project Title : Harnessing the Wind Energy
Abstract : To Study how to use the wind energy to various methods
Team size : 5

[Unregistered]

CURRICULUM VITAE

Post Applied for : NDT Inspector

OBJECTIVE :
To achieve the status and Position that would render professional work experience and provide fair opportunity for career growth.

EDUCATIONAL QUALIFICATION :
- Diploma in Mechanical
Mumbai University 2012
- I.T. I. Mechanical - Two year’s & one year – NCTVT Mumbai.
- Secondary School Certificate.
Madhymic High School–Mumbai.

TECHNICAL QUALIFICATION :
- Ultrasonic Testing – certified by SAUDI ARAMCO
Certificate No.ID - 1386

- ASNT Level II in Non-Destructive Testing (NDT)
from Mr.ArvindBhide’sInstitute Of Testing Technology (ITT)
Specialized in
- Ultrasonic Testing
- Visual Testing Of Weld
- Magnetic Particle Testing
- Liquid Penetrant Testing

WORK EXPERIENCE : Total Experience -7 Years
- M/S. Group Five pipe Saudi -(Manufacturer of Spiral SAW pipe)
Kingdom of Saudi Arabia. (From 22nd May 2008 to still date)

Job Designation : NDT Inspector (QA/QC Department)

- SOFRATEST Automatic Machines - (AUTO UT)
- Carried out UT & AUTO UT, Visual Testing Procedure, Inspection Test Plan requirements for NDT test.
- To carry out all kinds of required NDT methods such as UT, MPT & DPT in static equipment’s such as coils Heat Exchangers.
- Worked as an online Automated UT. Technician for Edge & Body Testing System.
- Worked as an offline and online Automated UT. Technician for Spiral Seam Weld Testing System.
- Training new UT personnel’s on - Online, Offline UT Systems & portable Flaw Detector’s.
- Fit up, final visual of welded joints & Structural inspection with class
CLIENT :
ARAMCO, SWCC, AL RAJHI, AL SUWAYEH, GCC, ACC PASCO,
TAIF AL BAHA, YANBU MADINA.

Worked in QUALITY ENTERPRISES (MUMBAI) under Mr.Arvind Bhide as a NDT Technician from 01/04/2007 to 28/04/2008.
- Carried out UT Weld Scanning, MPI, LPT and TG jobs in various companies and company Shutdowns.
- N.P.C.L, Tarapur.
carried out on tanks, columns, reactors & spheres
- Maharashtra Seamless Pipe, Nagothane
carried out on seamless pipes.
- B.P.C.L, Mumbai
carried out on columns, spheres, reactors & heat exchangers.
- H.P.C.L, Mumbai
carried out on Storage tanks, spheres, columns & reactors.
- N.P.C.L , Kakra park
carried out on tanks, columns, reactors & spheres
- Reliance Refinery, Jamnagar
carried out on Storage tanks, spheres, columns, heat exchangers & reactors.
- Reliance Refinery, Hazira, Surat
carried out on Storage tanks, spheres, columns, heat exchangers & reactors.
- Gammon company
carried out on cross country pipelines.
- Deepak Fertilizer Plant
carried out on, columns & reactors.
JOB RESPONSIBILITIES :
- Conducting & coordinating NDT – MT/UT/ PT on weld joint as per NDT plan & given specifications. in static equipment’ssuch as tanks, pressure vessels, heater coils .
- Detection of corrosion & other service defects on various vessels, pipelines &effluent waterlines.
- Inspection of welding of shop fabricated piping spools & ultrasonic flaw detection of structural welds.
- Visual inspection of BEVEL weld joints as per standards ASME Sec V

ADDITIONAL SKILLS :
- Proficiency in Microsoft Office
- Operating Systems Windows 98 / 2000 / XP / Windows 7
PERSONAL DETAILS :
Date of Birth : 21st –APR- 1983
Navi Mumbai - 400709
E-mail : mangesh21ndt AT yahoo.com
Marital status : Single
Nationality : Indian
Linguistic Proficiency : English, Arabic, Hindi, Marathi
Interests and Activities : Badminton, Football Cricket.

I hereby affirm that the information in this document is accurate and true to the best of my knowledge.

Place : Saudi Arabia (Dammam)
Date : 27/03/2013

(Mangesh Pandurang Mhatre)

[Unregistered]

RAHUL ANANDRAO KAMBLE
Email-kamblerahul29 AT yahoo.com

Seeking a challenging position with an organization of repute

SYNOPSIS :
Young, energetic and result oriented professional of comprehensive experience Extended expertise in CAD : CatiaV5/R17, Pro-E(Wildfire4.0), Part Designing, Assembly Designing, Drafting, Wire-frame and Surface Designing, Generative Sheet Metal Designing; Autodesk Inventor ,Autocad2007; CAM: Pro-E Cam(Manufacturing); Deep understanding of technology with focus on delivering business solutions; requirements; Highly ethical, trustworthy and discreet;

1. Strong analytical and problem solving skills
2. Ability to work in a team, hard working and complete projects on time
3. Solid presentation, communication skills
4. Excellent decision making skills with a positive approach
5. Dedicated and highly ambitious to achieve the organizational as well as personal goals

EDUCATION :
1.B.E with specialization in Mechanical engg. From S.C.E.T. RTM nagpur University is running
2.Diploma with specialization in Mechanical Engg. From Government polytechnic nagpur in 2008. with 66.27%
3.S.S.C Exam passed with 73.33%

CAD :- Catia V5/R17, Pro-E (Wildfire 4.0), Auto-desk Inventor (Part Designing, Assembly designing, Drafting, Wire Frame & Surface Designing, Generative sheet Metal Designing ),AutoCAD-2010

Computer Fundamental : - Basic Knowledge of Hardware, Windows 98, M.S Office, C, DTP Job work (Photo shop, Coral Draw, )

WORK HISTORY : -
BAJAJ STEEL INDUSTRIES LIMITED (Nov’08-Till date) :
Bajaj Steel Industries Limited, nagpur India , established in1961 is a public limited company . The company is having world class engineering setup in its various plants situated in and around Nagpur. The Present Activities of the Company are as below :

Manufacturing :
1.Largest & Modern cotton ginning & pressing machinery manufacture in India.
2.World class delinting and decorticating machinery manufacturing.
3.World class machining of components and parts for various applications.
4.All types of electrical panels to meet various industrial needs.
5.Hydraulic cylinder, Power Packs & manifolds for various applications.
6.Engineering & construction projects.

Bajaj is only company in the world producing machinery for all cotton ginning technologies i.e Double Roller, Saw Gin & Rotobar, all Pressing technologies i.e Down Packing , Up Packing & horizontal Packing as well as seed cleaning Delinting & decortining apart from general engineering fabrication machining , intelligent electrical panel manufacturing and various other engg. Activities.

Design Engineer :
Department : Research & Development Department

Key Deliverables. :
Interface with Production Planning & control Department Quality Control Department
1. Accountable for Design, Development, Detail Engineering , 3D Modeling, Engineering Calculations and drawing generation with GD & T , done as benchmarks. For Tyre and Cement Machinery.
2. Responsible for manufacturing, drafting and drawing as per ISO standards.
3 Responsible for making modifications in the design as per the client's requirement and Machine-shop feedback.
4 Bill of Material creation on ERP package as per Assembly Plan.
5 Taking appropriate corrective measurement and revision of Drawing.

PERSONAL DETAILS :
Father Name : Shri Anandrao Damodhar Kamble
Date of Birth : 23rd November,1988

RAHUL ANANDRAO KAMBLE

[Unregistered]

I am a intermediate based student and i have completed NDT Level 2 course. So can I get a job in Singapore as a NDT Inspector?

[Unregistered]

RESUME NDT INSPECTOR
N. P. PANDU RENGAN
Mail Id : pandunp92 AT gmail.com

Personal Details :
Indian : Nationality
08th June 1992 : Date of Birth
Single : Marital Status
Language Known : English & Tamil

Education Qualification :
B.Tech ( Mechanical with First Class ) 2013.
Kalasalingam University, Ramanadhapuram , Tamil Nadu.
H.S.C. Sivanars Matric. Hr. School , Madurai with 75.08 % .
S.S.L.C. Sivanars Matric. Hr. School with 71.63 %

Professional Qualification :
** Certification on software – AutoDESK2012
** Training Certificates on ASNT Level – II in
Radiography Testing
Ultrasonic Testing
Magnetic Particle Testing
Penetrant Testing .

Project & Training :
** Attended 7 days training in Integral Coach Factory Chennai.
** Attended 21 days training program in Hyundai Motors Chennai.

Professional Experience :
1. Company : Institute of Industrial NDT Technology.
Designation : NDT Inspector ( Trainee )
Duration : July 2013 to till date .
Assignment :
Assigned to perform various client jobs in Radiographic Testing , Ultrasonic Testing , Magnetic Particle Testing and Dye Penetrant Testing for various

** Boilers and Prssure vessels and its related accessories.
** Windmill towers
** Thickness measurement in piping of Boilers.

Equipments Known to Handle :
Ultrasonic testing : Einstein TFT II , Edison – 1 Thickness Guage.
Radiographic testing : Rolli-1.
Mangnetic Particle testing : SIMS Ac & Dc Yokes .
Liquid penetrant testing : Penetrant Testing solvent Type Visible and Fluorescent testing.

Activities :
** Has been a member of SAE-INDIA club for a period of two years.
** Has been a member of ISTE club for a period of two years.
** 2 day workshop in FEM in KLNCE
** Has been a part of the organisation committee in the national level technical symposium YANTHROTHAYA’12
** Has been a part of the volunteer in design committee in the second INTERNATIONAL CONFERENCE ON ADVANCED MANUFACTURING AND AUTOMATION’13

Declaration :
The statements which are given above are best to my Knowledge , and too I am stating that I will do the best for your esteemed organization .
Thanking You
Yours Sincerely
N.P. Pandu Rengan

[Elaizares]

So even if there is a thread and developers are working on it the route may not be for the public?