www.barodaequip.com Baroda Equipment Vessels Pvt Ltd : Mechanical Design Engineer

[Admin]

Design Engineer:
** Graduate Mechanical Engineer
** At least 5 years experience in design and engineering in heavy engineering fabrication industry, involving pressure vessels, heat exchangers, columns, reactors, storage tanks, piping, structures etc.
** Hands on knowledge of design and construction codes such as ASME Sec VIII, API 650, ANSI 31.3, AISC etc.
** Knowledge in fabrication, welding and NDT techniques.
** Must have hands on experience in design software such as PV Elite, Tank etc. and Autocad.
For all positions, handsome salary commensurate with skills and experience will be offered.

BEV is an equal opportunity employer and does not discriminate based on ethnicity, domicile, religion, caste, class or gender.

What matters to us are your skills, attitude and aptitude for learning.

Email your resumes to FAL@barodaequip.com. Please do NOT send them by fax or to any other email.

As a matter of policy, we do NOT entertain phone calls or correpondence from candidates after they have submitted their resumes. If you are shortlisted, you will be contacted. If you have not been contacted by a BEV official within a month of emailing your resume, chances are that your profile may not be matching to our requirements.
http://www.barodaequip.com

Baroda Equipment and Vessels Private Limited
Block 241−243, Muval−Mobha Road, Muval PO
Padra Taluka,
Vadodara 391 430
Gujarat, India
Phone: +91 2662 243100
Fax: +91 2662 243099

[Guest-IJT]

PRAJITH.K.P
Mobile: 09985308330
Email: kp_prajith AT yahoo.co.in

Job Objective: To seek a highly challenging & satisfying career, with great potential for growth; in areas of in the engineering, CAD/CAM, Product Design and Tool Design.

Education
- PGD in Tool Design form Maharashtra Institute of Technology (2005-2006).
- B.Tech in Mechanical Engineering from Govt. College Of Engineering ,Kannur Kerala(2000-2004)
Total Experience: 3 years and 9 months in Automotive and Aerospace domain.

Key Skills
- Tool Design.
- 2D to 3D conversion.
- Geometric Dimensioning and Tolerance.
- Preparation of Manufacturing Drawings
- Tool Manufacturing Process
- Inspection and Validation of tool after manufacturing.
- Exposure to various Manufacturing Process
- Pressure Die Casting.
- Sand Casting
- Electric Discharge Machining.
- Thermoform Moulding
- Compression Moulding for Composite materials.
- Injection Moulding
- Press Tool

SKILL PROFILE
Operating systems : Windows XP, Windows NT
CAD / CAE tools : UG NX4, Team Centre Engineering
MS-Office Tools : MS- Excel, MS- Word, Microsoft PowerPoint

PROFESSIONAL EXPERIENCE
1. INFOTECH ENTERPRISES LIMITED, Hyderabad
Designation : Design Engineer
2. R&D ENGINEERS, Pune
Designation : Design Engineer
3 MAHINDRA COMPOSITES (formerly Siro Plast)
Designation : Trainee Engineer
4 Vibs India Pressings Bhosari
Designation : CAD Engineer

Work Experience:
1) Presently working as Design Engineer, HS Infotech-Design Centre (SBI Vertical) in Infotech Enterprises Limited (2008 June- Till Date).
Company Profile: Infotech Enterprises is a $297million Global IT services company with over 7800 people specializing in Engineering Design Services (EDS), Geographic Information Systems (GIS), and IT services. Infotech is a CMMi level 5 company and is also certified to ISO 9001:2000, AS9100 standards. It provides services to a wide range of industries. Aerospace, Automotive, Banking Services, Finance and Insurance, Energy, Government, Marine, Rail, Retail, Telecom and Utilities
Nature of Job:
- Concept Design, Preliminary design and detail parametric Solid Modelling, Surface modelling, assembling and Detailing using different modules of CAD Tool Understanding the requirement of customer.
- Compliance to Geometric Dimension & Tolerance standards.
- Estimating the job, Co-ordination with the onsite person and clients.
- Creation of manufacturing drawing for parts and assembly, system level drawing and installation drawing.
- Preparation of Quality Check List. Final Quality-check of Models and Drawings.
- Documentation of project deliveries reports, lessons learnt and value addition

Tool Design Projects under taken,

- Fixture Checking Blade angle
Client : Hamilton Sundstrand, USA
Software used : Unigraphics NX4, TCE
Role : Team member
Team Size : 4

- Study of input 2D drawings and specifications from the client.
- Designing Blade Angle Checking fixture assembly for 787 RAT
- Creating 3D solid modelling.
- Creating Manufacturing Drawings for the fixture assembly.
- Pressure Test Cap for GSE
Client : Hamilton Sundstrand, USA
Software used : Unigraphics NX4, TCE
Role : Team member
Team Size : 4
- Study of input 2D drawings and specifications from the client.
- Designing Pressure Test Cap fixture assembly for 787
- Creating 3D solid modelling.
- Creating Manufacturing Drawings for the fixture assembly.
- Electrical Wire Harness Drawings
Client : Hamilton Sundstrand, USA
Software used : Unigraphics NX4, TCE
Role : Team member
Team Size : 4
- Study of input 2D drawings and specifications from the client.
- Creating Wire Harness Drawings In accordance with GSE standards.
- Transportation Fixture for 787 RAT
Client : Hamilton Sundstrand, USA
Software used : Unigraphics NX4, TCE
Role : Team member
Team Size : 4
- Study of input 2D drawings and specifications from the client.
- Designing Transportation Fixture for 787 RAT
- Creating 3D solid modelling
- Creating Manufacturing Drawings for the fixture assembly.

AMS Projects under taken.
- Legacy Conversion
Client : Hamilton Sundstrand, USA
Software used : Unigraphics NX4, TCE
Role : Team member
Team Size : 8
- Study of input 2D drawings and specifications from the Microtechnica Italy.
- Creating 3D solid modelling
- Creating 2D Drawings in accordance with HS 12000 Standards.
- Heat Exchanger Condenser mixture
Client : Hamilton Sundstrand, USA
Software used : Unigraphics NX4, TCE
Role : Team member
Team Size : 8
- Study of input 2D drawings and specifications from the client
- Creating 3D solid modelling
- Creating assembly models, wave geometry.
- Creating 2D drawing in accordance with HS 12000 Standards.

2) R&D ENGINEERS Pune, (2006 August-2008 June).
Company Profile: The Company is a technical solution provider for Pressure Die casting Design, Injection Mould Design, Thermoforming Mould Design, Inspection & Welding Fixture Design, 2D to 3D conversion.
Nature of Job:
- Casting Model development.
- Product Modification, as per tooling requirement.
- Design Calculations. & initial lay out for approval.
- Core Cavity, Slider Core Extraction.
- Complete Manufacturing Drawing and BOM release.
- Parametric Modelling.
- Attending Tool Trials.
- Interacting with tool manufacturer regarding manufacturability of the designed tools.
- Material selection for manufacturability and tooling requirement.
- Electrode Design for Electric Discharge Manufacturing process.
- Inspection and Validation of tool after manufacturing

Pressure Die Casting Die Design Projects under taken.
- Designing and Detailing of Clutch Cover. (Kinetic Engineering Ltd.)
- Designing and Detailing of Crank Case.(Kinetic Engineering Ltd.)
- Designing and Detailing Shifter Fork. (Endurance Technologies)
- Designing and Detailing Cam Cover. (Endurance Technologies)
- Designing and Detailing Bearing Frame. (Endurance Technologies)
- Designing and Detailing Clutch Housing. (Alcast Pvt.Ltd.)

Thermo Forming Mould Design Projects under taken.

- Designing and Detailing Thermo Forming Mould and Inspection Fixture for Mahindra Tractor Roof Liner. (Supreme Treves.)
- Designing and Detailing Thermo Forming Mould for Thiland Fire Wall. (Supreme Treves.)
- Designing and Detailing Thermo Forming Mold for Mahindra Tractor Carpet(Supreme Treves)
- Designing and Detailing Thermo Forming Mould for Maruthi Roof Liner .(Supreme
Treves)
Fixture Design Projects under taken.
- Designing Panel Checking Fixture for Radiator Reinforcement Bracket. (Tata Motors.)
- Designing Trim Line Checking Fixture for Ace 1 Ton Bonnet. (Tata Motors.)
- Designing Panel Checking Fixture for INDICA Cross Member. (Tata Motors.)
- Designing and Detailing Welding Fixture for Radiator Assy.(Tata Toyo.)


3) Mahindra Composites (formerly Siro Plast) As Trainee Engineer as a part of Industrial Training. (3 months) (2006 june-2006 August).
Undergone extensive training in different types of Compression Moulding process, like Sheet Moulding Compound (SMC), Dough Moulding Compound (DMC), Hand Moulding etc.
- Component Redesign for manufacturability.
- Compression Mould Design
- Mould Manufacturing
- Inspection Fixture

4) Vibs India Pressings Bhosari as a Design Engineer (2005 Jan -2005 July) 6months.

Personal Details
Address: H NO.2-25/9/1
Sri Sai Nilayam
Indra Nagar
Gachibowli
Hyderabad
500032

Date and place of Birth: 13th January 1983, Calicut.
Languages Known: English, Hindi, and Malayalam.
Martial status: Unmarried
Permanent Address:
Sreyas, Medical College (P.O), Calicut, Kerala.
Res Tel: 0495 2352060

I hereby declare that particulars in the resume are true to my knowledge.

DATE: (PRAJITH.K.P)

[Guest]

RESUME

NAME : RATHAVA PRAGNESHKUMAR SAVAJIBHAI

HOBBIES : PLAYING CRICKET, EARN MONEY, READING INTERESTING BOOKS

E-MAIL ADDRESS : rathava.pragnesh AT yahoo.com

EDUCATION QUALIFICATION :
SR.NO NAME OF COURSE EXAMINATION BOARD PERCENTAGE
1 S.S.C G.S.E.B 82.43%
2 H.S.C (SCIENCE STREAM) G.S & H.S.E.B 48%
3 B.E.(MECAHNICAL ENGINEERING) GUJRAT UNIVERSITY 7th sem 58%
8th pending

AREA OF INTEREST : MANUFACTURING PROCESS ,DESINING.

KEY STRENTH : EAGERNESS TO LEARN; TEAM FACILAOR, ENTHUSIASTIC WORK

COMPUTER PROFICINCY : BASIC AND AUTOCAD,PRO-E.

[Guest]

RESUME
R.JEGADEESH KANNAN,
Jegan.mass007 AT gmail.com
CAREER OBJECTIVE
To work in a globally competitive environment on challenging assignments and to be a part of the corporate growth.

ACADEMIC QUALIFICATION
Degree/ Course Institution University / Board Month & Year of Passing CGPA / % of Marks
B.E ( Production )
SETHU INSTITUTE OF TECHNOLOGY, KARIAPATTI. ANNA UNIVERSITY
MAY 2008 68
12th

S.B.K HIGHER SECONDARY SCHOOL, ARUPPUKOTTAI
STATE BOARD MARCH 2004 66
10th
S.B.K HIGHER SECONDARY SCHOOL, ARUPPUKOTTAI
STATE BOARD MARCH 2002 75
SOFTWARE QUALIFICATION
- Drafting Software : AUTOCAD
- Modeling Software : PRO-E WILDFIRE
Working Skills : Capable To Work AUTOCAD & PRO-E WILDFIRE
WORK EXPERIENCE
1) Name of Company ; VIRAJ PROFILES LTD.,
Tharappur, Maharastra-401 506

Nature of Product ; All Types of Stainless Steel Fasteners

Designation ; DESIGN ENGINNER

Duration ; From 1/06/2008 to 10/8/2010
Nature of Job ; 1. All type of tools and M/C spares Drg. Preperation
2. Preperation For All Process design & Tool Design
for all type of products (Bolts)
3. New products developments and Process
4. Tools life and performance achievements 5. New Devop. Item’s Tool Follow up.
6. New Devop. Item’s Forging Follow up.
2) Name of Company ; SKS FASTENERS LTD,
Chakan, Rajaguru nagar Dist,
Pune, Maharastra-401 506
Nature of Product ; High Tensile Bolts, Screws, Studs,
Rivets, Collar Bolts,Square Neck ,
Socket Head , Flange Head etc…
Designation ; DESIGN CUM PRODUCTION ENGINNER
(Bolt Former)
Duration ; From 14.08.2010 to 15.12.2010
Nature of Job ; 1. Over All Production Control,
2. Tool Planning & Follow up.
3 Production Planning
4. Production Follow Up to Machine Vice
5. Preperation For All Process Tools (Special)
for all type of products (Bolts)
6. New products developments Follow up.
7. Tools life and performance achievements 8. Guide to Operator about M/C Setting
10.Tools life and performance achievements

3) Name of Company ; MICRO TURNER FASTENER .,
Harriapur, Himachal. India.

Nature of Product ; High Tensile Bolts, Screws, Studs,
Rivets, Collar Bolts,Square Neck ,
Socket Head , Flange Head etc…
Designation ; DESIGN ENGINNER

Duration ; From 20/12/2010 to Still Now
Nature of Job ; 1. All type of tools and M/C spares Drg. Preperation
2. Preperation For All Process design & Tool Design
for all type of products (Bolts)
3. New products developments and Process
4. Tools life and performance achievements 5. New Devop. Item’s Tool Follow up.
6. New Devop. Item’s Forging Follow up.

[Guest]

CURRICULAM VITAE
SAMARTHKUMAR BHARATBHAI PATEL
Email.ID :-samarthpatel1925 AT gmail.com
2. EDUCATION QUALIFICATION :-
Sr. No. Year/Semester Board/University Year Of Passing Percentage
%
1. 10th (SSC) Gujarat Board MARCH-2005 67.14
2. 12th (HSC) Gujarat Board MARCH-2007 55.80
4. BE 1st year SSEC Bhavnagar Uni. JUNE 2009 48.96
5. BE 3rd semester SSEC Bhavnagar Uni. DEC 2009 50.71
6. BE 4th semester SSEC Bhavnagar Uni. JUNE 2009 50.93
7. BE 5th semester SSEC Bhavnagar Uni. DEC 2009 60.25
8. BE 6th semester SSEC Bhavnagar Uni. JUNE 2010 55.86
9. BE 7th semester SSEC Bhavnagar Uni. DEC 2010 58.70
10. BE 8th semester SSEC Bhavnagar Uni. JUNE 2011 63.80
3. AGGREGATE : - 55.60%
4. EXTRA CURRICULAR ACTIVITES :-
- Industries visited : - E+L, Windsor, H.D.O, I.G.T.R, etc.
- Organizational task carried in collage and school : - organize sports-week in college.
5. INTRESTED SUBJECTS :-
- Industrial Management
- Basic Machine Tools
- Enterprise Resources Planning
- Casting Processes
6. ACADEMIC WORK
- Seminar work under titled :- Under-water Welding
- Project work under titled :-Centrifugal Pump
7. INDUSTRIAL TRAINING :-
- In RATNAMANI Metals& Tubes ltd. During 21st June 2010 to 20th July 2010.
- In SPX Flow Technology (India) pvt. Ltd, During 10th Dec 2010 to 25th Jan 2011.
8. COMPUTER SKILL :-
- Microsoft Office
- Auto cad 2006
9. STRENGTH :-
- Honest and Hardworking,
- Professional Efficiency,
- Good Decision Maker,
- Counseling in Industrial problems,
- Ability of completing perfectly any Task launched.