Sofcon Group Saudi Arabia : Civil Engineer, Structural,

[Admin]

We are a Leading Consulting Engineering Company in Saudi Arabia, we require the following qualified & experienced candidates for our various projects:
General Requirement: All Engineers should be conversant with International Codes and Standards and capable of working on all project activities found in the Process Plant Industries, from Conceptual Front End Design, to Detailed Engineering and Procurement, to providing support for Construction Management.

Senior Design Engineers - Civil :
Civil/Structural Engineering Degree with a minimum of 10 - 12 years engineering experience in the field of Civil Engineering, including; Site Development, Grading & Paving, Road and infrastructure design, process plant offsite piping systems, etc. Candidates should have a minimum of 5 - 6 years experience with the Process Plant, Oil & Gas, and Petrochemical Industries, and be familiar with current industry work processes and engineering software applications, including Bentley In-Roads.

Senior Design Engineers - Structural :
Civil/Structural Engineering Degree with a minimum of 10 - 12 years of engineering experience in both reinforced concrete and steel structures. Candidates should have a minimum of 5 - 6 years experience within the Process Plant, Oil & Gas, and Petro-Chemical Industries. Candidates Should have thorough knowledge of industry
standard software applications, including STAAD.Pro, have experience with Intergraph PDS, and SmartPlant Applications, and AVEVA PDMS, and be familiar with current industry work processes.

Civil Design Engineers :
B.S. Engineering Degree with a minimum of 7 years experience in Community & Industrial Infrastructure, site development, grading & paving, road works (plan & profile), utility piping etc.

Senior Design Engineers - Electrical :
Electrical Engineering Degree with a minimum of 10 - 12 years of engineering experience, and be conversant with International codes and standards Candidates should have a minimum of 5 - 6 years experience within the Process Plant, Oil & Gas, and Petro-chemical Industries, and will have been exposed to all electrical engineering activities and work process found in this sector, including the preparation of;

[LIST][*]Technical specifications and project instructions[*]Technical calculations[*]Electrical deliverables for the process plant industries[*]Conversant with industry standard software applications, including Intergraph and AVEVA Electrical applications and ETAP[*]Be a to work in a project task force environment with client representatives[*]Assist with development of junior staff[/LIST]
Preference will be given to candidates with Saudi Aramco, and Saudi Electricity Company experience.

Senior Design Engineers - Instrumentation :
Relevant Engineering Degree with a minimum of 10 - 12 years of engineering experience, and be conversant with International codes and standards. Candidates should have a minimum of 5 - 6 years experience within the Process Plant, Oil & Gas, and Petro-Chemical Industries, and will have been exposed to all instrument engineering activities and work processes found in this sector, including the preparation of;

[LIST][*]Technical specifications and project instructions.[*]Technical calculations, including the sizing of control valve, pressure relief valves and flow meters.[*]Experience with DCS, PLS, and ESD engineered systems found in the process plant industries.[*]Experience with FieldBus Technology.[*]Conversant with industry standard software applications, including Intergraph SmartPlant Instrumentation.[*]Be able to work in a project task force environment with client representatives.[*]Assist with development of junior staff.[/LIST]
Preference will be given to candidates with Saudi Aramco experience.

Senior Design Engineers - Process :
Relevant Engineering Degree with a minimum of 10 - 12 years of engineering experience, and be conversant with International codes and standards. Candidates should have a minimum of 5 - 6 years experience within the Process Plant, Oil & Gas, and Petro-Chemical Industries, and will have been exposed to all process engineering
activities and work processes found in this sector, including the preparation of;

[LIST][*]Technical specifications and project instructions.[*]Technical calculations for sizing of static and rotating equipment, horizontal and vertical vessels, and process and utility piping systems, for onsite and offsite process units.[*]Conversant with industry standard software applications, including AspenTech Process Evaluator, KBase, and Hysis, including Intergraph SmartPlant applications.[*]Be able to work in a project task force environment with client representatives.[*]Assist with development of junior staff.[/LIST]
Preference will be given to candidates with Saudi Aramco experience.

Senior Design Engineers: Static and Rotating Equipment :
Mechanical Engineering Degree with a minimum of 10 - 12 years of engineering
experience, and be conversant with International codes and standards. Candidates should have a minimum of 5 - 6 years experience within the Process Plant, Oil & Gas, and Petro-Chemical Industries, and will have been exposed to all equipment engineering
activities and work processes found in this sector, including the preparation of;

[LIST][*]Familiar with ASME Boiler and Pressure Vessel Code, in particular ASME Section VIII Div 1 & 2.[*]Technical specifications and project instructions[*]Technical calculations for sizing of static and rotating equipment, horizontal and vertical vessels, including Pressure vessels, tanks, exchangers.[*]Conversant with industry standard software applications including; HTRI, HTFS, FLARNET, PV Elite, PV Tank, TEMA.[*]Be able to work in a project task force environment with client representatives[*]Assist with development of junior staff[/LIST]
Preference will be given to candidates with Saudi Aramco experience.

Senior Design Engineers (HVAC) :
Relevant Engineering Degree with a minimum of 10 - 12 years of engineering
experience, and be conversant with International codes and standards. Candidates should have a minimum of 5 - 6 years experience within the Process Plant, Oil & Gas, and Petro-Chemical Industries, and will have been exposed to all HVAC activities and
work processes found in this sector, including the preparation of;

[LIST][*]Technical specifications and project instructions[*]Technical calculations for the design of HVAC systems and applications for industrial and commercial applications, including the process plant industries.[*]Conversant in ASHRAE, SMACNA, ASTM, NFPA, AMCA and other HVAC industry codes and standards[*] Conversant with industry standard software applications, including; CHVAC, HAP, Load Express.[*]Be able to work in a project task force environment with client representatives[*]Assist with development of junior staff[/LIST]
Preference will be given to candidates with Saudi Aramco experience.

Senior Design Engineers: Buildings :
Relevant Engineering Degree with a minimum of 10 - 12 years of engineering experience, and be conversant with International codes and standards. Candidates should have a minimum of 5 - 6 years experience within the Process Plant, Oil & Gas, and Petro-Chemical Industries, and will have been exposed to appropriate building and structure design codes and work processes found in this sector, including the preparation of;

[LIST][*]Technical specifications and project instructions[*]Technical calculations for the design of building structures and coverings from conceptual design, to detailed engineering, including the production of fabrication and construction deliverables.[*]Conversant with industry standard software AutoCAD, Microstation and 3D Studio Max. including HVAC systems and applications for industrial and commercial applications, including the process plant industries.[*]Be able to work in a project task force environment with client representatives[*]Assist with development of junior staff[/LIST]
Preference will be given to candidates with Saudi Aramco experience.

Senior Design Engineers - Communication :
Relevant Engineering Degree with a minimum of 10 - 12 years of communication and data management experience, and be conversant with International codes and
Standards, and work practices. Candidates should have a minimum of 5 - 6 years
experience within the Process Plant, Oil & Gas, and Petro-Chemical Industries, and can demonstrate experience in:

[LIST][*]Data Network Engineer[*]Candidate should be Cisco and Microsoft Certified, with minimum 4 - 9 years experience in the design of ATM and Ethernet (LAN / WAN).[*]Data Engineer responsible for data network design and documentation. Project responsibilities will include visits to client locations, document retrieval, and LAN/WAN design and integration.[/LIST]

[LIST][*]Senior Outside Plant Network Design Engineer:[*]Responsible for cabling copper and fiber design and distribution. Including; conduit system, splicing technology, encasement and Protection.[*]Conversant in performing engineering studies in the planning and design of Telecommunication networks for outside plant network for fiber optics and copper cable in the process plant industries.[*]Must be able to conduct engineering surveys of existing infrastructure, and proposed outside plant facilities, including the preparation of land use permits.[*]Coordinate with the client regarding provision of telephone facilities on existing and proposed structures. The preparation of exchange demand forecast, and the documentation for primary cable and manholes and conduit network, prepare detailed engineering design for primary and secondary cable distribution, fiber loop network for remote switching unit and Central office interconnection, and manhole and conduit job. Prepare bill of materials and cost estimates of the outside plant project.[*]Be able to work in a project task force environment with client representatives.[*]Assist with development of junior staff[/LIST]
Preference will be given to candidates with Saudi Aramco experience and exposure to GTE and BICSI standard is required.

Senior CADD Group Leader: Design Supervisor :

1. Piping
Design Supervisor responsible for the assignment and scheduling of project work. A minimum of 8 -10 years experience within the Process Plant, Oil & Gas, and Petro-Chemical Industries. Familiar with project execution strategies using 3D modelling including Intergraph SmartPlant 3D, PDS; AVEVA PDMS, Microstation and AutoCAD. Reports to the discipline lead engineer on a project, and ensures that the communication flow is maintained across the piping discipline and other design and engineering activities.
2. Building Engineering/Architectural
Design Supervisor responsible for the assignment and scheduling of project work. A minimum of 8 -10 years experience within the Process Plant, Oil & Gas, and Petro-Chemical Industries. Familiar with project execution strategies for infrastructure engineering using 3D modelling including Intergraph SmartPlant Applications, Microstation, AutoCAD and 3D Max. Reports to the discipline lead engineer on a project, and ensures that the communication flow is maintained across the building engineering/architectural discipline and other design and
engineering activities
3. Civil / Structural
Design Supervisor responsible for the assignment and scheduling of project work. A minimum of 8 -10 years experience within the Process Plant, Oil & Gas, and Petro-Chemical Industries. Familiar with project execution strategies using 3D modelling including Intergraph SmartPlant 3D, PDS Frameworks; AVEVA PDMS, Microstation and AutoCAD. Reports to the discipline lead engineer on a project, and ensures that the communication flow is maintained across the civil / structural discipline and other design and engineering activities
4. Communications
Design Supervisor responsible for the assignment and scheduling of project work. A minimum of 8 -10 years experience within the Process Plant, Oil & Gas, and Petro-Chemical Industries. Familiar with communication project execution strategies and deliverables using Intergraph, AVEVA, Microstation and AutoCAD applications. Reports to the discipline lead engineer on a project, and ensures that the communication flow is maintained across the communication discipline and other design and engineering activities
5.Instrumentation
Design Supervisor responsible for the assignment and scheduling of project work. A minimum of 8 -10 years experience within the Process Plant, Oil & Gas, and Petro-Chemical Industries. Familiar with project execution strategies using 3D modelling including Intergraph SmartPlant Instrumentation; AVEVA PDMS, Microstation and AutoCAD. Reports to the discipline lead engineer on a project, and ensures that the communication flow is maintained across the instrumentdiscipline and other design and engineering activities.
6. Electrical
Design Supervisor responsible for the assignment and scheduling of project work. A minimum of 8 -10 years experience within the Process Plant, Oil & Gas, and Petro-Chemical Industries. Familiar with project execution strategies using 3D modelling including Intergraph SmartPlant Electrical; AVEVA PDMS, Microstation and AutoCAD. Reports to the discipline lead engineer on a project, and ensures that the communication flow is maintained across the electricaldiscipline and other design and engineering activities.

send your CV at:
recruit@sofcongroup.com
employment@sofcongroup.com
hrd@sofcongroup.com

http://www.sofcongroup.com

[Guest-IJT]

Name : RAVI GOPAL CHAUHAN
Email : ravigopal786 AT gmail.com
Designation / Skillset : Site Engineer (CIVIL)

Resume :
Academic Qualification :
10th Passed From Haryana Board of School Education, Bhiwani

12th Passed From Haryana Board of School Education, Bhiwani
BA Passed (Graduated) from M.D University Rohtak
Technical Qualification :
Diploma in Civil Engineering Government Polytechnic Ottawar

5 Months Certificate in Auto cad from CADD Centre Vansh (Palwal)
Computer Skills :
Designing Software : Auto Cad, Road Estimator 5.x
Auto Plotter 5.0
Operating System : DOS, MS-Office/98/2000/XP
Application Package : MS-Word, MS-Excel, MS-PowerPoint
Language : C, C++, Visual Basic

Business System : Visual FoxPro
Web Tools : Internet and Web Designing
Front End Tools : HTML
Others : Structured System Analysis and
Design, Linux, Unix
Data Communication and
Networking, Computer Organization
Experience Detail [01]

Project cost Rs. 62 Crores.
Client : RAIL VIKASH NIGAM LTD.
Contractor : ERA INFRA ENGINEERING LTD.
Consultant : SCOTT WILSON INDIA (Pvt).LTD.
Period of job : SEPTEMBER 2008 to SEPTEMBER 2010
Profession : Assistant Engineer (CIVIL)
Experience Detail [02]

Project cost Rs. 478 Crores.
Client : NATIONAL HIGHWAYS AUTHORITY OF INDIA
Contractor : ERA INFRA ENGINEERING LTD (EPC).
Concessionaire : DEHRADUN HIGHWAYS PROJECTS Ltd.(SPV)
Period of job : SEPTEMBER 2010 to Till Date

Profession : Site Engineer (CIVIL)
PRESENT EMPLOYMENT RECORD:

Presently : ERA Group
Position Held : Site Engineer (Concessionaire)


Four Laning of Haridwar –Dehradun section from Km 211+000 to Km 218+200 of NH-58 and Km 165+000 to Km 196+825 of NH-72 in the state of Uttarakhand under NHDP Phase-III as BOT (Annuity) on DBFOT Pattern.
- Present address : ERA INFRA ENGINEERING LTD.
DEHRADUN HIGHWAYS PROJECTS Ltd.
Khand Gaon No. - 02 Raiwala Rishikesh Road,
Post Office.- Raiwala
Distt- Dehradun
Theh - Rishikesh
UTTARAKHAND
RESPONSIBILITIES:
REAL ESTATE PROJECTS
- Carry out Technical supervision of ongoing civil work such as Layout, RCC Work, concreting, masonry, plastering, flooring, waterproofing, painting, plumbing etc., at all stages.
- Structure, concrete work & Layout, Execution of work as per drawing and specification Checking & Contractors Billing.
- Make sure about work carried out as per technical specifications specified in BOQ.
- Reconciliation of all construction material used at site.
- To prepare MIS on monthly basis, monthly consumption reports, daily progress report, etc.
- Responsible for achieve the target with time schedule.
- Make sure about the measurement is as per work executed at site.
- To check for proper stacking and storage of materials in various godowns and stores of the site, and keep control on the wastage of material at site, To coordinate with different sub-contractors and petty contractors, agencies to maintain and improve quality as well as progress of construction work & Rate Analysis.
- Over all site Management & Planning.
- Preparation of Quantities.
- Execution of RCC, BBS, Structural, Plaster and all finishing work..
- Allocating duties to Foreman and Lead-man for daily activities.
- Correspondence & Co-ordination with Clients & Consultants.
- Calculating the Quantity of Men and Machinery for Each activity on daily basis.
- Setting out of layouts.
- Execute all type of civil works ( RC foundations, grade beams, columns, core walls, water tanks, roof slabs and finishing works )
- Execution of RCC, BBS, Structural, Plaster and all finishing work..
- Preparation of Daily Progress Report in accordance with B.O.Q.
- Monitoring progress, Preparations of weekly or monthly reports and arranges site meetings
HIGHWAYS & RAILWAYS WORK PROJECTS
- Responsible for inspection of the containing of weekly work progress. Responsible for weekly budget, monthly budget, dealing with client etc.
- Checking of all working drawings of Box Culvert, Pipe Culvert, Minor Bridge, Underpass, and Drain, Railway over Bridge and Flyover Drawing and Railway Alignment Drawings.
- Preparation & Checking of Cross Section and drawings of Roads in Road Estimator and auto plotter Software and calculate the Qty of earth work (Excavation and Embankment)
- Checking of level Sheets and Bar bending Schedule.
- Checking & Preparation Modification of L-Section and X. Sections.
- Checking of Excavation and Embankment quantity calculation Sheet.
- Checking of Roads drawings and Cross Section of Roads and calculate the Qty of Earth Work and shoulder area in Road Estimator and Auto plotter Software.
- Checking in Horizontal and Vertical Profile.
- Preparation and Modification of L-Section and Cross Sections
- Checking & Prepare Monthly Progress Report.
- Checking and Calculate the Qty of Profile Correction Course.


Language Known:
HINDI ENGLISH
Write Excellent Excellent
Read Excellent Excellent
Speak Excellent Excellent


CERTIFICATION:

I, the undersigned, certify that to the best of my knowledge and belief, this bio-data correctly describes me and my experience.
DATE: ………………….. Name: RAVI GOPAL
PLACE: …………………. (Signature of the applicant)
-------------------------------------------------------
More Information about this submission and submitter:-
___________________________________________________
Submission ID : 4175883
Date & Time : 26th May 2011 11:16 AM (UTC)
IP Address : 117.241.216.23
Browser Info : Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; BTRS26718; InfoPath.3; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)
Predicted Country : India

[Guest]

RESUME
=============================================================
AVINASH JAGTAP

E-mail :- abjagtop AT gmail.com

OBJECTIVE
In search of a challenging position of civil / Structural engineering where I can work with diversified and creative projects.
SKILL
- Familiar with Staad Pro – V8i, AutoCAD,
- Excellent problem solving and analytical skills.
- Able to operate Microsoft office tools such as word, power point, excel and access.
- Efficient management and organizational skills.
- Good communication and writing skills.
- Open minded and able to work in complex projects and environment.
WORK SUMMARY
M.P. Prime Structures Pvt. Ltd. (Navi Mumbai) -
Designation – Manager (Design Engineer)
Experience - 10 Months (August 2010 – till date)
- Development of industrial area of 830ares at kalyan, Dist Thane. Involvement in all structural and RCC structures.
- Design of industrial building, Culvert, RMC plant and Go down structures of PEB structures.
- Design of fire station, Kolhapur. For MIDC Pune
- Proof consulting of Chemical plant at Mundra, Gujarat for Dorf Ketal
- Design and analysis of ‘’Super Speciality hospital’’ of 14 storied building with seismic force combination at Kharghar, Navi Mumbai
- 100+ Projects did with Residential Commercial and Iindustrial analysis and design.
- Working Stone Crushing Plant at Kalyan, for Lafarge
-
M/s STUP CONSULTANTS Pvt. Ltd. (Mumbai) -
Designation – Senior Design Engineer
Experience - Aug. 2006 - July. 2010 (4.0 year Exp.)
- I was involved in analysis and design of high seating capacity cricket stadium in Nagpur (Maharashtra) was done with seismic forces (IS : 1893, IS: 456 & IS: 13980). Stadium having four stand; I had worked on south stand which is prestigious design point of view.
- I was involved in Ghana Presidency Structures and did the President Villa, Gate house, Villa Private Lounge and Villa Atrium. All are R.C.C. structure except the Villa Atrium. The upper part of Villa Atrium has steel structure.(BS : 8110 & BS: 5590).
- I analyzed 2D industrial frame or consultant purpose which having wind load & point load of gantry girder.
- I.T. and DTH building (23 floor) with Raft combined and isolated footing for Bharti in New Delhi.
- Sebha International Airport in Libya. This is RCC, Structural Steel and composite in Analysis & design with Euro code& BS code.
- I T Park, Chandigarh for Bharti Airtel with Indian code.
- I.T. Building, UNOC building & U G tank with Raft combined and isolated footing for Bharti in New Delhi.
- Client :- Afghan National Security force in Kabul, Afghanistan
Involve in R C C building and steel structure, Auditorium, Offices etc.
Code : ACI 318 & ASCE 7 & IBC 06.
- Client :-Presidency parliament house, Gambia.
- Chennai Metro Station, Chennai (India)
M/s EPICONS Consultants Pvt. Ltd. (Mumbai) -
Designation - Junior Design Engineer
Experience - 6 Months (Feb – July 2006)
- Design of industrial building of small Pratt and king post truss with wind load forces.
- Design of cantilever and counter fort retaining wall cum water retaining wall. (IS : 3370)
- Design of seven-storied building with seismic force combination.
EDUCATION
M.Tech. (Structural Engineering) with GATE (93.28) in 2005 from National Institute of Technology (Formerly R.E.C.), Kurukshetra, (Harayana) with 8.619 C.G.P.A.
Semister First Second Third
S.G.P.A 8.244 8.400 9.250
B.E. (First class) Civil Engineering from Amravati University in 2002 with 67.40%.
Years wise First Second Third Final
Percentage 65.67 61.69 63.22 69.07

Diploma (First class) Civil Engineering, from Bombay Technical Education in 1999 with 65.67%.
10th (First class) Pune University in 1996 with 67.36%.
COMPUTER SKILLS
Languages : C/ C++/ MATLAB (basics)
Software Packages : STAAD Pro 2007 & V8i
STAAD Pro 2004, NISA-CIVIL, RISA CIVIL, MS Office.
M.Tech. DISSERTATION
Strengthening of beams and columns using Tyfo Fibrwrap System
(Experimental Investigation)
B.E. PROJECT
Planning, Analysis and Design of hospital building.
DIPLOMA PROJECT
Analysis of Water Supply Scheme for Small Village
EXTRA CURRICULAR ACTIVITIES
American Society of Civil Engineers, Washington. (Student membership)
Institute of Civil Engineers, London. (Student membership)
Indian Society for Technical Education, New Delhi. (Student membership)

[Guest]

RESUME

AVINASH JAGTAP
E-mail :- abjagtop AT gmail.com

OBJECTIVE
In search of a challenging position of civil / Structural engineering where I can work with diversified and creative projects.
SKILL
- Familiar with Staad Pro – V8i, AutoCAD,
- Excellent problem solving and analytical skills.
- Able to operate Microsoft office tools such as word, power point, excel and access.
- Efficient management and organizational skills.
- Good communication and writing skills.
- Open minded and able to work in complex projects and environment.
WORK SUMMARY
M.P. Prime Structures Pvt. Ltd. (Navi Mumbai) -
Designation – Manager (Design Engineer)
Experience - 10 Months (August 2010 – till date)
- Development of industrial area of 830ares at kalyan, Dist Thane. Involvement in all structural and RCC structures.
- Design of industrial building, Culvert, RMC plant and Go down structures of PEB structures.
- Design of fire station, Kolhapur. For MIDC Pune
- Proof consulting of Chemical plant at Mundra, Gujarat for Dorf Ketal
- Design and analysis of ‘’Super Speciality hospital’’ of 14 storied building with seismic force combination at Kharghar, Navi Mumbai
- 100+ Projects did with Residential Commercial and Iindustrial analysis and design.
- Working Stone Crushing Plant at Kalyan, for Lafarge
-
M/s STUP CONSULTANTS Pvt. Ltd. (Mumbai) -
Designation – Senior Design Engineer
Experience - Aug. 2006 - July. 2010 (4.0 year Exp.)
- I was involved in analysis and design of high seating capacity cricket stadium in Nagpur (Maharashtra) was done with seismic forces (IS : 1893, IS: 456 & IS: 13980). Stadium having four stand; I had worked on south stand which is prestigious design point of view.
- I was involved in Ghana Presidency Structures and did the President Villa, Gate house, Villa Private Lounge and Villa Atrium. All are R.C.C. structure except the Villa Atrium. The upper part of Villa Atrium has steel structure.(BS : 8110 & BS: 5590).
- I analyzed 2D industrial frame or consultant purpose which having wind load & point load of gantry girder.
- I.T. and DTH building (23 floor) with Raft combined and isolated footing for Bharti in New Delhi.
- Sebha International Airport in Libya. This is RCC, Structural Steel and composite in Analysis & design with Euro code& BS code.
- I T Park, Chandigarh for Bharti Airtel with Indian code.
- I.T. Building, UNOC building & U G tank with Raft combined and isolated footing for Bharti in New Delhi.
- Client :- Afghan National Security force in Kabul, Afghanistan
Involve in R C C building and steel structure, Auditorium, Offices etc.
Code : ACI 318 & ASCE 7 & IBC 06.
- Client :-Presidency parliament house, Gambia.
- Chennai Metro Station, Chennai (India)
M/s EPICONS Consultants Pvt. Ltd. (Mumbai) -
Designation - Junior Design Engineer
Experience - 6 Months (Feb – July 2006)
- Design of industrial building of small Pratt and king post truss with wind load forces.
- Design of cantilever and counter fort retaining wall cum water retaining wall. (IS : 3370)
- Design of seven-storied building with seismic force combination.
EDUCATION
M.Tech. (Structural Engineering) with GATE (93.28) in 2005 from National Institute of Technology (Formerly R.E.C.), Kurukshetra, (Harayana) with 8.619 C.G.P.A.
Semister First Second Third
S.G.P.A 8.244 8.400 9.250
B.E. (First class) Civil Engineering from Amravati University in 2002 with 67.40%.
Years wise First Second Third Final
Percentage 65.67 61.69 63.22 69.07

Diploma (First class) Civil Engineering, from Bombay Technical Education in 1999 with 65.67%.
10th (First class) Pune University in 1996 with 67.36%.
COMPUTER SKILLS
Languages : C/ C++/ MATLAB (basics)
Software Packages : STAAD Pro 2007 & V8i
STAAD Pro 2004, NISA-CIVIL, RISA CIVIL, MS Office.
M.Tech. DISSERTATION
Strengthening of beams and columns using Tyfo Fibrwrap System
(Experimental Investigation)
B.E. PROJECT
Planning, Analysis and Design of hospital building.
DIPLOMA PROJECT
Analysis of Water Supply Scheme for Small Village
EXTRA CURRICULAR ACTIVITIES
American Society of Civil Engineers, Washington. (Student membership)
Institute of Civil Engineers, London. (Student membership)
Indian Society for Technical Education, New Delhi. (Student membership)

[Guest]

EDUCATIONAL BACKGROUND:
ELEMENTARY : Burgos Memorial School East Vigan City, Ilocos Sur Philippines SY 1982 – 1988
SECONDARY : UNIVERSITY OF NORTHERN PHILIPPINES Vigan City, Ilocos Sur ,Philippines SY 1988 – 1992
COLLEGE : BACHELOR OF SCIENCE IN CIVIL ENGINEERING
UNIVERSITY OF NORTHERN PHILIPPINES Vigan City, Ilocos Sur, Philippines SY 1992 – 1997
ELIGIBILITY : Licensed Civil Engineer
PRC License No. 082082
COMPUTER KNOWLEDGE : AUTOCAD, Microsoft office, Primavera, MS Project.
III. EMPLOYMENT RECORD
A. COMPANY : Daelim Industrial Co. LTD.
Jubail Industrial City, Kingdom of Saudi Arabia
PROJECT HANDLED :
- Saudi Aramco Dow Chemicals Refinery (SADARA)Project
JUbail 2 Industrial City, Kingdom of Saudi Arabia
Isocyanates Refinery Plant

Position : CIVIL SUPERVISOR
- January 07,2012 to Present
Duties and Responsibilities :
- Preparation of reports and schedule update to be submitted to the clients.
- Primavera schedule of works, ITP
- Conduct Walkthrough Inspection on site together with the Sub-contractors.
- Participates in the everyday tool box meeting for the workers.
- Preparation of drawing and work schedule to be done for the completion of the project.
- Updating and revision of the drawings according to amendments and modifications carried out in the field.
- To ensure that quality requirements are determined and satisfied throughout all phases of contract performance, including as applicable, design, developing, procurement, construction and pre-commissioning.
- Coordinates and monitor the progress of work to the contractors to ensure that the scheduled task is met.
- Supervision of works and giving instruction on site condition for the task given.
- Saudi Aramco TOTAL Refining & Petrochemical Company (SATORP)
Jubail Industrial City, Kingdom of Saudi Arabia
- * Jubail Export Refinery Package # 2B
Acid-Gas Treatment Plant
Jubail 2, Industrial City, KSA
Position : BUILDING SUPERVISOR
Period : August 09, 2010 to PRESENT
Duties and Responsibilities :
- Preparation of reports and schedule update to be submitted to the clients.
- Primavera schedule of works, ITP
- Conduct Walkthrough Inspection on site together with the Sub-contractors.
- Participates in the everyday tool box meeting for the workers.
- Preparation of drawing and work schedule to be done for the completion of the project.
- Updating and revision of the drawings according to amendments and modifications carried out in the field.
- To ensure that quality requirements are determined and satisfied throughout all phases of contract performance, including as applicable, design, developing, procurement, construction and pre-commissioning.
- Coordinates and monitor the progress of work to the contractors to ensure that the scheduled task is met.
- Supervision of works and giving instruction on site condition for the task given.
B. COMPANY : AMLAC GROUP OF COMPANIES
Jubail Industrial City, Kingdom of Saudi Arabia
PROJECTS HANDLED :
- IBN ZAHR PPI , MTBE
Jubail Industrial City, Kingdom of Saudi Arabia
- * Expansion Project for the Maintenance Warehouse
- AL JABRI JUBAIL HOUSING PROJECTS
Al Farouq North, Jubail City, Kingdom of Saudi Arabia
Position : PROJECTS ENGINEER / QA/QC ENGINEER
Period : FEB 05, 2010 to August 08, 2010
Duties and Responsibilities :
- Preparation of reports and schedule update to be submitted to the clients.
- Preparation of Method of statement, QA/QC Plan, Primavera schedule of works, ITP
- Conduct Walkthrough Inspection on site together with the Contractors.
- Participates in the everyday tool box meeting for the workers.
- Preparation of QA/QC procedures for the projects and present for approval of the clients.
- To ensure that quality requirements are determined and satisfied throughout all phases of contract performance, including as applicable, design, developing, procurement, construction and pre-commissioning.
- Monitoring Inspection progress, review inspector’s reports and documents and modifications carried out in the field.
- Updating and revision of the drawings according to amendments and modifications carried out in the field.
- Coordinates with QA/QC for Effective implementation of quality system recommended quality audits and follow up.
- Ensure the results of inspection in accordance with the project quality plan.
C. COMPANY : HANWHA ENGINEERING & CONSTRUCTION
Jubail Industrial City, Kingdom of Saudi Arabia
PROJECTS HANDLED :
- AAC Ethelyne Amines Project
Al-Waha St., Jubail Industrial City, Kingdom of Saudi Arabia
Position : Building Inspector
Period : January 27, 2009 to December 26, 2009
Duties and Responsibilities :
- Preparation of reports and schedule update to be submitted to the clients.
- Preparation of Method of statement, QA/QC Plan, Primavera schedule of works, ITP
- Conduct Walkthrough Inspection on site together with the Contractors.
- Participates in the everyday tool box meeting for the workers.
- Preparation of QA/QC procedures for the projects and present for approval of the clients.
- To ensure that quality requirements are determined and satisfied throughout all phases of contract performance, including as applicable, design, developing, procurement, construction and pre-commissioning.
- Monitoring Inspection progress, review inspector’s reports and documents and modifications carried out in the field.
- Updating and revision of the drawings according to amendments and modifications carried out in the field.
- Prepare and submit internal request for inspection (RFI) to project inspection.
- Implementation of quality plan based on the client specification and international standards codes, referring the design and quality manual.
- Supervising of concrete curing inspection of concrete pouring activities, checking that approved mix design is used, monitoring of cylinder preparation and inspection reports.
- Checking installed structures according to design, standards, layout, and elevation such as anchor bolt, rebars settings and other related civil works.
- Check the inspection of every excavation to see contractors are within the specified limits.
- Coordinates with QA/QC for Effective implementation of quality system recommended quality audits and follow up.
- Ensure the results of inspection in accordance with the project quality plan.
D. COMPANY : SEDRES CONSTRUCTION
Maintenance Operation Industrial Project & Gen. Contracting Est.
PROJECTS HANDLED :
- HVAC/PLUMBING WORKS AT IBN ZAHR PP III
CONTRACTOR : SAMSUNG SAUDI ARABIA
- SAUDI EUROPEAN PETROCHEMICAL CO. (Ibn Zahr) PP III , Jubail City, KSA
- SEDRES CHEMICAL FACTORY, JUBAIL INDUSTRIAL CITY
- DIALOG METAL FABRICATION STEEL STRUCTURE WAREHOUSE,JUBAIL KSA
- AL MARWA HOUSING PROJECTS, AL FERDOS ,KSA
- MULTI-STOREY APARTMENTS , JUBAIL CITY,KSA
Position : Planning Engineer & Civil Inspector
Period : March 24, 2007 to December 12, 2008
Duties and Responsibilities:
- Planning of the schedule of works for the projects in HVAC/plumbing works.
- Preparation of reports and schedule update to be submitted to the clients.
- Preparation and supervision of civil works for the HVAC System for all the Projects mentioned.
- Preparation of Method of statement, QA/QC Plan, Primavera schedules of works, ITP,
- Conduct Walkthrough inspection on site together with the Contractors.
- Participates in the every day safety tool box meeting for the workers.
- Supervision of the installation of the fabrication and installation of the ducting supports
- Supervision on the Civil works for the HVAC system in the PP II Main control bldg. modifications
- Supervision on the implementation of works in the New Substation # 9 for the ductings and HVAC systems in the switch gear area, installation of machines until it will be ready for commissioning.
- Supervision in the installation of the ducting and machine works in the Remote Control Bldg. for the HVAC system.
- Supervision of works in the Emergency Generator bldg. for the exhaust ducting installations and exhaust systems.
- Supervision in the implementation of works in the Warehouse bagging area and substation for the exhaust ductings and supply, HVAC systems installations.
- Supervision in the ducting works, machine connection and assembling, chilled water piping works for the new Pellet Building in the expansion of IBN ZAHR PP III.
E. COMPANY : Bureau of Jail Management and Penology
Regional Office 1
San Fernando City, La Union
Philippines
PROJECT : 4-Storey Regional Office Bldg.
- Pangasinan District Jail Bldg.
- Ilocos Norte District Jail Bldg.
- Modification of City & District Jail Bldgs. For Ilocos
Region
Position : Area Regional Engineer
Period : 29 Nov 2002 To 24 March 2007
Duties and Responsibilities:
- Planning in the implementation of the projects in the regional area.
- Preparation of the work progress for the projects done.
- Supervision in the construction of Jail Buildings for the regional area.
- Preparation of plans estimation and implementation of the renovation of the Regional office bldg.
- Supervision of the construction of the expansion of jails in Province of Pagasinan.
- Preparation of plans , quantity survey, schedules for the Proposed 4 storey Region Office bldg.
- Supervision in the Site Preparation of the Proposed New Jail Building in Province of La Union.
- Making reports to the higher Head quarters for the progress of work in the sites.
F. COMPANY : DMCJ General Construction Inc.
Bangued, Abra
Philippines
PROJECT :
- Bangued – SOOT Bridge
Bangued, Abra
- Residential and Commercial Bldgs.
Position : Project Engineer
Period : March 2000 To 27 November 2002
Duties and Responsibilities:
- Preparation of plans for the Proposed projects,
- Supervision in the formworks for the bridge to be constructed, rebar works.
- Supervision in the concreting of the bridge post, girders, slabs and railings,
- Supervision for the construction of embankment for the bridge, retaining walls, etc.
- Supervision in the preparation of road concreting, and site preparations.
- Implementation of the Approved construction plans and oversee the progress of the construction site prior to reports for the clients.
- Preparation of the progress reports of the project done.
G. COMPANY : BCS Realty Holdings and Devt Corp.
Vigan City, Philippines
PROJECT : Site Development,
Construction of Residential / Commercial Bldgs. and
Warehouses
Position : Project Engineer
Period : Dec 1998 To March 2002
Duties and Responsibilities:
- Supervision in the Site Development
- Supervision in the construction of steel frames, roofing, warehouse and Residential Bldgs.
- Supervision in the installation and repair of pipe lines for Maynilad Water Services Inc. (MWSI)
H. TRAININGS AND SEMINARS:

- OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION ( 30 HRS )
Construction Outreach Training Program
Conducted by : Brilliance Unlimited Training Center
Jubail, Kingdom of Saudi Arabia
Date : October 15- 29, 2010
- BASIC OCCUPATIONAL SAFETY AND HEALTH (BOSH) TRAINING COURSE (40 Hrs )
Conducted by : Philippine Society of Safety Practitioners
Middle East Region
Al-Andalus International School
Al-Khobar, Kingdom of Saudi Arabia
Date : March 30 to May 1, 2009
- Technical Presentation & Seminar workshop on
1. NEARMISS REPORTING SYSTEM
2. SILICA SAFETY for EMPLOYEES
Conducted by : Philippine Society of Safety Practitioners
Middle East Region Chapter
Dhahran Palace Hotel
Dhahran, Kingdom of Saudi Arabia
Date : April 24, 2009
- Technical Presentation & Seminar workshop on
1. HEAVY EQUIPMENT SAFETY REQUIREMENTS
2. OCCUPATIONAL ERGONOMICS
Conducted by : Philippine Society of Safety Practitioners
Middle East Region Chapter
Dhahran Palace Hotel
Dhahran, Kingdom of Saudi Arabia
Date : February 27, 2009
- PICE 31st National Convention " Sustaining PICE's Gains Through 32 years by Fostering Unity and Vigilance"
Conducted by : Philippine Institute of Civil Engineer National Chapter
Manila Hotel, Metro Manila, Philippines
Date : November 17 – 19, 2005
- PUBLIC SAFETY BASIC RECRUITE COURSE
Conducted by : Philippine Public Safety College
Camp Bagong Diwa, Taguig Metro Manila ,Philippines
Date : 05 December 2002 to 03 April 2003
- Mechanically Stabilized Earth ( MSE ) and Resource Leveling
Conducted by : Philippine Institute of Civil Engineer
Ilocos Sur Chapter
Vigan City Philippines
Date :18 – 19 July 1998