www.avantgarde-india.com POWER PLANT AUTOMATION TRAINING PROGRAMME Chennai

[Admin]

POWER PLANT AUTOMATION TRAINING PROGRAMME

Course Duration : THREE (3) DAYS

Programme Content
1. BASIC INSTRUMENTATION CONCEPTS
2. BASIC CONTROL SYSTEM CONCEPTS
3. BOILER CONTROL SYSTEM
4. TURBINE CONTROL SYSTEM
5. BALANCE OF PLANT AUTOMATION
6. BASICS OF DCS - BY DCS VENDOR'S TRAINING GROUP
7. ENERGY CONSERVATION PROJECTS
8. INTRODUCTION TO FUZZY LOGIC
9. PRACTICAL TRAINING IN CONTROL SYSTEMS
10. LECTURE ON A SPECIALISED AREA OF AUTOMATION BY A SPECIALIST FROM VENDORS

Programme Fee : RS. 10,000/- PER PERSON + SERVICE TAX @ 10.3%
--------------------------------------------------------------------
Power Plant Engineer's Training Programme

Course Duration : Four (4) Days
Programme Content
1. BASIC DESIGN ASPECTS OF POWER PLANT
2. POWER PLANT CYCLES
3. DESIGN ASPECTS OF BOILER & AUXILIARIES
4. DESIGN ASPECTS OF TURBINE & AUXILIARIES
5. DESIGN ASPECTS OF BALANCE OF PLANT
6. BASICS OF STRESS ANALYSIS
7. OPERATION & MAINTENANCE
8. BASICS OF POWER PLANT ELECTRICALS
9. BASICS OF POWER PLANT INSTRUMENTATION
10. BASICS OF DISTRIBUTED CONTROL SYSTEM
11. ENERGY CONSERVATION ASPECTS

Programme Fee : RS. 12,000/- PER PERSON + SERVICE TAX @ 10.3%

Suggested Participants For Both Programmes :

A. Plant Managers
B. Plant Engineers Of Any Discipline
C. Plant Operators
D. Any Engineer With Minimum Power Plant Experience

Accommodation At Chennai:
Can be arranged by Avant-Garde on request.Expenses towards accommodation shall be to participant's account

Travel & Boarding :
All travel & boarding expenses are to the participant's account.

Other Facilities :
Lunch During The Programme Will Be Provided By Avant-Garde

(Note: Course Fee Shall Be Paid In Advance Through Crossed Dd Drawn In The Name Of "Avant-Garde Systems And Controls (P) Ltd"., Payable At Chennai.)

Request For Participation:
Please Download Registration Form For Enrollment In Training Will Be Filled Up And Sent To Avant-Garde So As To Reach Them At Least Seven (7) Days Before Start Of The Programme.

AVANT-GARDE ENGINEERS AND CONSULTANTS PVT. LTD.,
No. 68A, Porur Kundrathur High Road, Porur,
Chennai - 600 116.
Tamilnadu, India.
Ph. nos.: +91-44-2482 7843, 2482 8532, 2482 8717 through 2482 8720.
Fax: +91-44-2482 8531.

E-mail : avantgarde@vsnl.com
http://www.avantgarde-india.com

[Guest-IJT]

Name : PREM SHANKAR
Email : premshankar005 AT gmail.com
Designation / Skillset : power engineer
From,
MR. Prem Shankar
New Colony,
Bettiah.
Bihar.
.

Sir,
Subject : Regarding apply for Job.
I am Prem Shankar from Bettiah I had finished my B.Tech. (Electrical and Electronics Engineering) in 2009 & Post Graduate Diploma In Hydro Power Plant Engineering From N.P.T.I with 90% of marks currently I am working in H.P.P Energy (India )Private Limited as Asst.Engineer (Erection & commisning)from May2010. I am willing to work with you. Kindly consider my application form.
I attached my Bio data (Resume) in this document. Please refer my documents and reply me.

Resume :
Objective
To work in an inspiring and challenging environment where I can apply my knowledge to various real time projects and contribute my worth towards a better future in industry.
Experience
Working in HPP Energy (India) Pvt. Limited, G-21, Sector-63, Noida, U.P. as Asst.Engineer (Erection and commissioning) from MAY 2010.
COMPANY PROFILE
HPP Energy (India) Pvt. Ltd. is a Joint Venture Company with Hydro Power Plant – France, established in India on EPC basis for implementation of Hydro Power Projects.
Hydro Power Plant, France, is one of the renowned enterprises in Europe designing and manufacturing hydro turbines and peripheral electrical equipment for manual / automatic operation since 1972.
JOB PROFILE
- Working as Power Engineer( site) and handling all electromechanical works at site.
- Gone through erection of Francis turbine at Rishiganga hydro power project(uttrakhand) and Birahiganga hydro power project(uttrakhand)
- Gone through installation, erection of Electrical LT & HT Panels at site.
- Preparation of daily progress report & MOM with clients at site.
- Playing the role of site in charge at sites.
- Supervision of Megaring, H.T & L.T Cable & Cable Tray Lying, H.T Cable. Jointing, Bus Ducting & Earthing work.
- Performing Pre Commissioning activity at sites.
- Answering Customer Clarification & Keeping record of correspondence / documents.
- Coordination with Head office during erection, testing and during commissioning.
- Going through supervision of civil work at sites.
- Preparation of drawing schedule, S.L.D, Cable Trench & Panel Layout of Project at Head office.
- Preparation of Commissioning Report, Pre Commissioning Report, Cable Schedule at Head office.
- Performing detaile engineering at head office.
- Education Details
- PGDC in Hydro Power Plant Engineering from National Power Training Institute (NPTI Nangal ,Punjab.) Under Ministry Of Power, Gov. Of. India. With 90%(1st class with Distinction) May 2010.
- B. Tech. in Electrical & Electronics engineering with 77.9 % (1st class with Distinction) May 2009.
Bharath University Chennai, Tamilnadu approved by UGC.
- 10+2 from Guru Nanak H.S School, Ranchi.
- 10 from St. Xavier’s H.S School,Bettiah.
In-plant Training
- Gone through Training at Bhakra Power House.
- Gone through training at T.N.E.B AT 66KV Substation .
- Visited Gangual & cotla power house(Nangal).
- Gone through Electronic Governor training program.

Project
Developed Scada Based Automation Of Power Plant Using P.L.C
- This sytem was controlling the power plant and its auxillarys according to the desired set points given to plc & Scada system shows the complete vision of plant.

Declaration
- I hereby declare that the information given by me is true and best of my knowledge and belief.
Place : Noida
Date : 18 -05-2011 (Prem Shankar )
-------------------------------------------------------
More Information about this submission and submitter :-
___________________________________________________
Submission ID : 4186594
Date & Time : 29th May 2011 7:14 AM (UTC)
IP Address : 59.164.2.227
Browser Info : Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.1.5) Gecko/20091102 Firefox/3.5.5
Predicted Country : India

[Guest]

RESUME

DEEPAK KUMAR S
B.E. Electronics & Instrumentation Engineering
E-MAIL ID: deepak1988eie@gmail.com

My Belief & Strength
“Do not compare your skills and performance with others and let yourself down. Rather keep working to improve your skills and performance.” – I believe in this and keep on working to improve myself.

** I am an Optimistic Person.
** I am very Patriotic and Honest.

Declaration
I do here by declare that the particular of information and facts stated herein above are true,
Correct and complete to the best of my knowledge and belief.

Place : Tirunelveli Signature :

Date : Name : Deepak Kumar S

[Guest]

Manigandan.S
Email : thiru.manigandan AT gmail.com

Carrier Objective :
To go ahead with an eminent enthusiasm so as to face the challenge of changing time and situation and utilize the outcome for the benefit of the self as well as the organization in the field of Electrical and Electronics Engineering.
Professional Experience :

- Hands on experience in Erection and commissioning of power projects.

Working Experience :
COMPANY NAME DESIGNATION DURATION
POWERTECH Constructions Pvt Ltd, Chennai SITE ENGINEER October 2009 TO
Till date

Job Responsibilities : (POWERTECH Constructions Pvt Ltd)
- Erection and commissioning of 2MVA and 2.5MVA transformers.
- Erection and commissioning of light fittings and lighting cables.
- Erection and commissioning of HT and LT panels.
- HT and LT power cables lying and termination.
- Site supervision, coordination with Client, Consultants and contractors.
Projects handled :
Electrical wirings and electrical equipments installations for APOLLO TYRES LTD, Oragadam.
Additional Qualification :
- Programmable Logic Controller Package :
Keyence – KV40R
Omron – ZEN (VERSION 3.00)
Allen Bradley – RS LOGIC 500
Asea Brown Boveri – AC31GRAF
Educational Qualification :
- Aggregate of 68.00% in Bachelor of Engineering (Electrical and Electronics Engineering) (2004 – 2008) from R.M.K. Engineering College affiliated by Anna University, Tamilnadu.
- Secured 81.00% in H.S.C (2003 - 2004) from Vellayan chettiar Higher Secondary School, Thiruvottiyur, Tamilnadu.
- Secured 92.00% in SSLC (2001 – 2002) from K.L.K Govt Higher Secondary School, Gummidipoondi, Tamilnadu.