Piping Engineer Delhi Kolkata Pune : UB Engineering Ltd

[Admin]

Post for : PIPING ENGINEER
Job Description : Should have experience in piping fabrication, erection. The candidate should be well conversant with piping isometric drawings, flow control charts, P & ID and prepration of piping testing circuits for pressure testing in power / process piping, petrochemical etc.
Location : Any Where In India
No. of Posts Available : 6
Educational Qualification : BE/BTech(Mech)/DME
Professional Qualification : Piping Technology
Experience Required : 3 Years and above
Apply Before : 31st August 2010

Apply online : www.ubengineering.com/job-application.php
E-mail : hrd@ubengg.in

The UB Group is one of the largest corporate conglomerates in India with a widespread international network of 24 countries and widely diversified and well balanced portfolio of business activities.

UB Engineering Ltd., is the flagship Company of UB Group’s Engineering Business having multinational operations in construction activities.

REGISTERED AND HEAD OFFICE
UB Engineering Ltd.,
Sahyadri Sadan, Tilak Road,
Pune - 411 030
Maharashtra State, INDIA
Tel.: +91-20-40161700 / 24333722
Fax: +91-20-40161711
E-mail: hrd@ubengg.in

REGIONAL OFFICES
DELHI OFFICE
UB Engineering Ltd.A-83, DDA Sheds,
Okhla Industrial Area,Phase - II,
New Delhi - 110020
Tel : +91-11- 4059 7777/ 2638 5109 / 3290 2204
Fax : +91-11-2638 5032

KOLKATA OFFICE
UB Engneering Ltd.,
4 ,Bankshall Street ,
Wallace House (2nd Floor)
Kolkata - 700 001.
Phone No : 033-32920442

[Guest]

CURRICULAM VITAE

SUBIR DAS
H.NO. 25,VIRAT NAGAR
MODEL TOWN , PANIPAT. MOB. 09991979893
HARYANA. Ph.no.03561220135
---------------------------------------------------------------------------------------------------------------------
TOTAL EXPERIENCE : 8.5 years in Oil & gas construction field.

PRESENT SITUATION:
Working as a Project Engineer [Mechanical] in NAPTHA CRAKER PROJECT under INDIAN OIL CORPORATION LTD in Panipat , Haryana with INDIAN OILTANKING LTD in Off-site & Storage Facilities (EPCC-8) from July2007.

RESPONSIBILITY:
- Execute Steel Structural Fabrication and Erection of Offsite Pipe Rack (appx. 22000 MT), Compressor House Gantry (60mts x 20 mts), Loading /Unloading Gantry.
- Surface preparation of material as per Swedish Standard (SA 2.5) & Primer application as per technical specification.
- Documentation related to Fit-up, Dimensional accuracy, Weld visual, Shot blasting & primer application ,Verticality of Columns , Field Welding & Painting Clearance.
- Checking measurement of Running Bills, Final Bills & Reconciliation of materials.
- Engineering support to ensure compliance with job specification.
- Co-ordinate with all disciplines of work and lease with site engineer as assigned for day to day activities.
- Verify and ensure all activities in the assigned area to compliance with technical specification, drawing & QA/QC procedure.
- Erection and alignment of Equipments like LP Air receiver, Pumps etc.
- Co-ordination with contractors, consultant & client.
- Execute all activities related to commissioning to offsite piping system like water flushing, air drying, leak test etc.
- Liquidate all punch point related to utility & process piping system proposed by client & contractor through Format I to Format IV.
- Identification of System-subsystems and chart encompassing all the relevant detail in consultation with Engineering Manager and prepare Project Commissioning Plan.
- Coordinate Commissioning Procedure preparation in consultation with Engineering Manager.
- Coordinate Commissioning Meetings with Client.
- Coordinate with all other EPCC during flashing & air drying in PNC project complex(OSBL & ISBL).
- Complete of job within completion period with proper safety.

WORK EXPERIENCE:
1.Worked as a Project Engineer [Mechanical] with INDIAN OILTANKING LTD at Baitalpur IOCL Depot. [UP] from Fab2007 to June 2007.
Key responsibilities were
- Execute FRV Tank erection ,including liquidate of punch point from client.
- Blasting and Painting , Documentation related to verticality of shell , vacuum test of bottom plate , puncher & rain water test of deck, hydro fill test of tank, pneumatic test of all pad plate etc.
- Structural Fabrication and Erection related to tank & tankfarm area.
- Final box up & commissioning of tank.

2. Worked as a Site Engineer (MEAHANICAL) in BAHADURGARH TERMINAL [Haryana] under Mundra-Delhi Pipeline Projects with KNY Projects Pvt Ltd ( A 9001 Certified Project Management Consultant Co.) on behalf of Balmer & Lawrie Co Ltd (A GOVT of India Undertaken Co.)from Sep 2006 to Feb 2007.
Key responsibilities were
- Execute Steel Structural Fabrication and Erection of Product Pump House , Tank Truck Filling Gantry, Tank Wagon Loading Gantry (960 mts long).
- Surface preparation of materials as per Swedish Standard (SA 2.5) and Primer application as per technical specification .
- Completion of the job as per scope, Measurement & certify the extra activities.
- Checking of RA Bills, Final Bills & reconciliation of materials.
- Documentation related to QA/QC.
- Clarify all problems in drawings & site position.
- Proper job planning to complete the job within completion period.
- Co-operation with Contractors & Client.

3. Worked as a site engineer(Mechanical) in MUNDRA-DELHI PIPELINE PROJECTS [HPCL] and CRUDE OIL STORAGE SYSTEM [IOCL] at Mundra [Gujarat] with KNY PROJECTS PVT LTD (A 9001 Certified Project Management Consultant Co.) on behalf of Balmer & Lawrie Co. Ltd (A GOVT of India Undertaken Co.)from Dec 2005 to Sep 2006.
Key responsibilities were
- Steel Structural Fabrication and Erection , Shot Blasting and Painting of Bust up pump house ,Fire Water Pump House ,Grease Drum Shade, Product Pump House etc.
- Documentation related to Fit-up, Dimensional accuracy, Weld visual, Shot blasting & primer application ,Verticality of Columns , Field Welding & Painting Clearance.
- Execute all activities related to CS piping system.
- Making Isometric drawing from GA.
- Preparing measurement sheet & reconciliation of materials.
- Checking of RA & final bill.
- Coordinate with Contractor , Consultant & Client.

4. Worked as a Site Engineer with KAIZER CONSTRUCTION CO.LTD from Jan 2004 to Sep 2005.
Key responsibilities were
- Steel Structural Fabrication and Erection , Shot Blasting and Painting of Industrial Shade (65X40 mts).
- Documentation related to structural work.
- Reconciliation of materials.
- Documentation related to QA/QC

5. Worked as a Production Executive in THE STATESMAN LTD (A National Daily) From Sep’2001 to Dec’2003,Siliguri.
Key responsibilities were
- Preventive maintenance of high speed rotary off-set machines, high pressure compressors [up to 18 kgf], DG set [up to 100 KVA] .
- Weekly Production Planning and Documentation .


EXTRA ACTIVITIES:

1. Execution of Piling work in DMC Process (Dia-450mm , Depth-14 mts.) was a major activity in MUNDRA TERMINAL PROJECT, Gujarat.

2. Working experience on one month Shut – Down Project in RFCC Unit (Panipat Refinery) as a commissioning Engineer.

EDUCATIONAL QUALIFICATION:
1. Passed Madhyamik Examination from West Bengal Board Of Secondary Education with 69.33% [1st Division] on 1996.
2. Passed Diploma in Mechanical Engineering from West Bengal Board Of Technical Education with 72.4% [1st Division] on 2001.

KNOWLEDGE IN COMPUTER: MS Word , Excel , Internet.

INDUSTRIAL TRAINING:
1. Training on IN-PLANT TRAINING from N.S.I.C (GOVT Of India).including Tensile Testing in Universal Testing Machine, Hardness testing in Rockwell & Brinel Hardness Testing Machine, Heat Treatment of Ferrous Materials,& chemical analysis , many types of machining operations in Milling, lathe, Universal Boring, shaping m/c etc.
2. Training on Babcock and Wilcox Boiler from Jalpaiguri Govt. Polytechnic Institution.


ADDRESS: C/O S.C Das ; South Ashok Nagar ; PO&DIST-Jalpaiguri ;
West Bengal;
PIN-735101.
Ph.No. 03561-220135[R]

DATE OF BIRTH: 9th July 1979.

PRESENT SALARY: 4.5 Per Annul.

EXPECTED SALARY: Negotiable.

E-MAIL: subir_das79 AT rediffmail.com

PERSONALITY: I am a result focused man , who believes in my own strength , skills and roles while remaining flexible. Hard work and sincerity is inborn traits. I have good teamwork skills and find myself fit for team based organization.



SUBIR DAS.
PANIPAT.

[mayurchitroda]

CURRICULUM VITAE
Chitroda Mayur .g.
Piping Engg. (B. E. in Mechanical)
Mayur_chitroda AT yahoo.co.in
Mob:08010505559/09824111143
Career Objective
I am looking for an entry level position in Piping engineering (Piping Design & Detail engg.) with an excellent ability to work as a team to achieve company objectives.
BRIEF OVERVIEW :
- B.E. (Mechanical Engineering) with 1st class from Hemchandracharya North Gujarat University, Patan.
- I have 1yr 2 month total exp.of maintenance & site work & design work.
- 6 month training & Certified Diploma Course in Piping Design & Detailed Engineering with PDS software from SmartBrains Institute Of Engineering Design & Research.
- Very active and energetic individual possessing good communication skills, grasping power, and leadership qualities.
- Acquired knowledge and understanding of subjects like; PDS,PDMS,AUTO-CAD.
- Abilities in handling multiple priorities, with a bias for action and a genuine interest in personal and professional development.
- Extremely motivated and career-oriented professional capable to work in a professional environment with a positive attitude

Key Skills :
Knowledge of Piping & Detail engineering.
- Study Plot Plan & Equipment Layout Drawings.
- Preparing Isometric and Piping GA.
- Preparing piping layout.
- 2D and 3D modeling.
- Material Take Off (M.T.O).
- Study Nozzle Orientation Drawing.
- Codes and Standards (ASME/ANSI etc.).
- Study P&ID.
- Fittings, Valves and Instruments.
- Basic Knowledge in Pipe Thickness & Pressure Drop Calculations.
- Rack Piping, Layout Piping & Yard Piping.
- Basic idea in Supports & support Type.
- Pump Piping,Exchanger Piping,Column Piping and Tank Farming.
Software knowledge:-
PDS(Plant Design System):
Equipment Modeling- Equipment Modeling Interface, Orientation Tee, Equipment Palettes, Creating Equipments from 3-D Primitives, Nozzle Placement & manipulation, Understanding Parametrics.
(conti.on next page)
Piping Modeling- Routing Piping Centerlines, Placing Piping & Piping Components, Piping Assemblies, Revise Components & Analyze Data Commands, 3-d modeling of piping based upon P&Ids, Equipment G.A & Layout & mechanical data Sheet.

PDMS(Plan Design Management System-AVEVA:
- Review of P&I Diagrams.
- Designing Equipments and pipe routing in Plant Design Management System (PDMS).
- Plotting the plot plan.
- Modification of designed Isometrics as per final P&I Diagram
- Extracting 2D drawings from 3D Model
Auto Cad
Micro station
Ms-office,Os-like win-xp,vista,etc.
Academia :
School Level Qualifications
Class Name of School Board Percentage Year of Passing
10th Std. Swami vivekanand vinay mandir,junagadh. GSEB 62.29%(withtechnical)
2003
12th Std. Swami vivekanand vinay mandir,junagadh. GHSEB 52.15% 2005
B.E. In Mechanical engg.Government Engineering College, Modasa (Gujarat)
Year/Semester
Percentage University Aggregate
1st Year 53.75% Hemchandracharya North Gujarat University, Patan.
( finished in june 2009 ) 58.08%
3rd Semester 54.53%
4th Semester 57.20%
5th Semester 58.75%
6th Semester 59.87%
7th Semester 61.70%
8th Semester 60.80%

Computer Proficiency :
- Knowledge of: Ms-Office, C,C++ , Internet, Bussiness systems, Internet & Web Desing, IT Tools & Applications.

Experience :
- Worked with Amoli Organics Pvt.Ltd. vapi unit as a Maintenance engg. (Shift engg.) From july 2009 to Sptember 2009.
- USFDA approved, API’s manufacturing company.
- Working with Smart brains Engineers & Technologist pvt.ltd. Ghaziabad as a piping design engg.from March 2010 to till the date.
- Profile of Smart brains Engineers & Technologist pvt.ltd. Ghaziabad.its one time of design project hiring company.which designing on PDS,PDMS.and Autocad.
Preparation of piping Isometric Drawing, 3D modeling and layout of piping & equipment modeling,M.T.O. preparation,eparation of P&ID.

Extra Activities :-
- I Cleared ‘CCC’ & “O-level” examination( which Conducted by Doeacc Society, An Autonomous Scientific Society Of Department of Information Technology Ministry of Communications and Information Technology.Govt.of India, New Delhi.
- I gave seminar on “Welding Technology & their Defects “,in 6th Semester.
- I gave seminar on “Wind energy & Wind turbine generator(WTG)” in 7th semester.
- I cleared examination of Disaster Management with “ A “ grad.
Industrial Training :-
- I Done my industrial traning in “INDIAN RAYON : A unit of Aditya Birla Nuvo Ltd.-Veraval(Gujarat)”.
- I Submitted industrial traning-Project report On ‘World class Manufacturing system of Japanese Technology(WCM) ‘- in Indian Rayon : A unit of Aditya Birla Nuvo Ltd. Veraval (Gujarat)’.
Passport No:- H0233100
Date of issue:- 22/08/2008 Date of expiry:-21/08/2018

Personal Information
Chitroda Mayur.g.
42-shamvad vihar, Ahinsa Khand – II,
plot no-3, Indirapuram,
Ghaziabad-201010 Contact Information:
mayur_chitroda AT yahoo.co.in
Mayurchitroda.engg AT gmail.com
Mo.:-+91 8010505559/09824111143
Ph :- (0285) 2650325
Parmenant Address:-
“Chamunda Nivas”,Opp.Govt.Godawn
,Nr.chamunda flour mill,
Ganadhigram,
Junagadh-362001(Gujarat)
Hobbies: Internet surfing, reading,Listening Music,Bike riding.

Father’s Name Mr.Girdharbhai.D.Chitroda
Father’s occupation Auditor cum accountant
Date Of Birth 28th December 1988.
Gender Male
Marital Status Single
Nationality Indian
Language English, Hindi, Gujarati

Thanking you.
Place: indrapuram(ghaziabad) Yours faithfully
Date: / /2010. (Mayur chitroda)