www.airliquide.com Air Liquide Engineering India Pvt Ltd Hyderabad : PDS Piping Design Engineer

[Admin]

Location : Hyderabad / Secunderabad
Desired Candidate Profile :
B.E. / B.Tech (Mechanical) with 7 to 10 years experience in piping design;Conversant with international piping codes and standards, regulations and piping material specification etc.;Hands on experience with PDS 3D, AutoCAD, piping flexibility analysis and piping support design.Piping fabrication and erection experience is desired

Job Description :
Prepare detailed schedule in line with overall project schedule, monitor & deliver construction drawings - Piping Iso, GA, Support drawings as per schedule.Ensure accuracy in Material Requisitions.Check all drawings w.r.t. Air Liquide Standard, Project requirements, statutory requirements, P&IDs, Vendor drawings, Inter departmental input drawings, applicable International codes/standards, incorporate all comments before issuing for construction.Perform 3D model review by using SPR to comment and ensure maintenance, construction, operation and safety requirements.Foresee issues / delays and take corrective actions, assign and supervise the team for quality and schedule, implement mandatory requirements of AL standards and manage a team of 6-12 piping designers / modelers.Participate in progress review meetings with Customer/Client/Inter departments[/LIST]

Company Profile :
Air Liquide, are world leaders in Air and Gas Separation, backed up by over 100 years of Research and Development. Air Liquide Group is now active through in over 75 countries with 42,300 employees in over five continents.

Air Liquide started its subsidiary, Air Liquide Engineering India pvt Ltd., (ALEI) at Hyderabad to cater to markets in and around India. This is one of the five engineering and construction offices of Air Liquide Group worldwide apart from one in France, USA, Japan and China.

ALEI benefits from all technologies and patents developed by Air Liquide for design, engineering, manufacturing of Air Separation Units and presently employ’s 266 people with specialists (having had experience of one - two decades in air and gas techniques) dedicated to Process, Mechanical Equipment Design, Civil and Structural Design, Piping and Layout, Machinery, Instrumentation and Electrical, who are adequately assisted by Engineers and Soft Tools like HYSIS, PDS, Smart plant, EJAP etc.

Air Liquide Engineering India (ALEI), Hyderabad is one of the five global E & C Cryogenics entities of the Air Liquide Group.
Contact Details

Company Name : Air Liquide Engineering India (P) Ltd.
Website : http://www.airliquide.com http://www.in.airliquide.com/

Email Address : v.dharini AT airliquide.com
Air Liquide India (Head Office)
A-24/9, Mohan Co-Operative Industrial Estate
Mathura Road, New Dehli 110 044

Air Liquide India (Factory)Roorkee :
125-126 AIS Industrial Estate
Latherdeva Hoon, Jhabreda Road
Manglore, Roorkee - 247 667 Uttrakhand

Alwar :
125, Matsya Industrial Area, Alwar 301 030, Rajasthan

Dharuhera :
Plot No - 36, Sector - 8, Dharuhera Industrial Area,
Dharuhera, District : Rewari
Haryana

Panipat :
Naphtha Jhakri Cracker Complex
IOCL, Panipat
Haryana

Jhagadia :
38/1, GIDC Industrial Area,
Jhagadia, District : Bharuch
Gujrat

Air Liquide India (Regional Office)
Meghdhanush Building, Mezzanine Floor, Gotri Road, Race Course Circle (South),
Vadodara - 390 007, Gujrat

Air Liquide Engineering India Ltd
Air Liquide Engineering India P Ltd
Plot NO - 79 , IDA, Mallapur
Nacharam
Hyderabad - 500 076
India

[Guest]

IWANT TO JOIN YOUR ORGANIZATION HOW TO SEND MY RESUME

[Guest]

MD.SARFARAZ
PATNA COLONY, G.S ROAD, JUGSALAI
NEAR RAILWAY LINE, JAMSHEDPUR,
JHARKHAND, PIN :831006
Mbl :-+919122697926
PNT : 06572293862
E-Mail : sarfaraz_saba30 AT yahoo.com , md.sarfaaraz AT gmail.com
Objective : Seeking a quality environment where my skills and knowledge obtained from prestigious institute, in MECHANICAL ENGINEERING that can be shared and enriched to work in a progressive work culture with all freedom to be innovative.
Technical Qualifications :
1) Graduation :
Degree Institution Board / University Year %
Marks
B.Tech.in Mechanical Engineering Jaipur Engineering College & Research Centre
Jaipur Rajasthan Technical University, Kota 07 - 10 Result Awaited
- Up to 3rd year 60% marks.
2) Diploma :
Degree Institution Board / University Year % Marks
Diploma in MECHANICAL
Engineering Al-Kabir Polytechnic, Jamshedpur S.B.T.E, Jharkhand 2007 78.34
Academic Qualification :
Degree Institution Board / University Year % Marks
MATRICULATION Mrs.K.M.P.M High School J.S.E.B, Ranchi 2001 61
Experience :
Vocational Training :
Name of the Organization Duration Works Done
TATA STEEL LTD, ADITYAPUR 1 Months Familiarization Study of Machining Process
Using planner, shaper, lathe
THE TATA STEEL, JAMSHEDPUR 1 Months Study of continuous casting and defect in
Continuous casting in LD SHOP #1
Project in B.Tech. & in Diploma in Engineering.
- Completed a project on Mechanical Equivalent of Heat (1cal. =4.2Joule) under the guidance of Mr.LALIT KUMAR SHARMA, Lec. J.E.C.R.C, Jaipur.
- Also done a project on HYDRAULIC SYSTEM under the guidance of Mr. Ali Zahid, HOD AL-Kabir Polytechnic, Jamshedpur
Operating System Windows XP, Vista, Linux.
Technical Software Auto CAD/CAM, Mat lab
MS-Office MSWORD, MSEXCEL, MSPOWERPOINT
Field of Interest
- Power Industry
- Steel Industry
- Manufacturing & Production
Personal details
Fathers Name Mr. Md.shafique
Date of birth 10th DECEMBER 1985
Sex Male
Nationality Indian
Languages Known English, Hindi, Urdu
Hobbies Reading, Listening Music, Making Friends, Playing Cricket
Declaration
I hereby declare that above information provided here is true to the best of my knowledge.

Date :

Place : JAMSHEDPUR
……………………................
(Md.Sarfaraz)
Dear Madam/Sir,
I came across your job posting on your site for the role of Mechanical Engineer and would like to apply for it. Also diploma in mechanical
Please find attached my profile and resume.
Best Regards,
md sarfaraz

[Guest]

NARUNE VIJAYKUMAR
PIPING DESIGNER PDMS

Email ID : vijaynarune AT gmail.com
PROFILE :-
3+ years experience in the field of Mechanical, Piping Engineering Design. A variety of successful projects for, industrial, oil & gas, refinery,& Power plant, with ASME standards codes, PDMS & AUTOCAD, and detailed piping design, pipe supports, 3D modeling, fabrication drawings. Proficient in the use of : AutoCAD, PDMS, Microsoft Windows and Microsoft Office.Pdms Version 11.6 Piping, Equipment Design, Structure & Cable tray. Modeling by Aveva.
PROFESSIONAL EXPERIENCE :
- Presently working with POWER AND PROCESS PLANT CONSULTANT PVT.LTD HYDERABAD. (05/2008 to till date)
1) Project Summary
Project : CPDP-37
Client : SHELL
Tools : PDMS
Environment : Windows XP
Team Size : 5
Role : PDMS Modeler

Role & Responsibilities :
1 Equipment Design On PDMS
2 Routing of pipes (3d-Modeling) on PDMS Using P&ID
3 Extracting isometrics from PDMS ISODRAFT.
4 Checking Iso’s and Piping GA Drawings As Per P&ID
5 Preparing MTO’S
6 Modelling STUCTURE as per plant layout.
7 Modelling CABLE TRAY as per layout (ELECTRICALS)
2) Project Summary
Project : SRI PRABULINGESHWAR SUGAR&CHEMICAL L.T.D(27 MW).
Client : GODAVARI ENGINEERS LIMITED
Tools : PDMS
Environment : Windows XP
Team Size : 6
Role : PDMS Modeler

Role & Responsibilities :
1 Routing of pipe as per PI&D & PLOT PLAN
2 Extraction of Isometrics.
3 Preparation of BOM.
4 Preparation of piping GA.
5 Modelling structure as per plant layout.
3) Project Summary
Project : TABRIZ OIL REFINARY (2400 KW)
Client : GODAVARI ENGINEERS LIMITED
Tools : PDMS
Environment : Windows XP
Team Size : 6
Role : PDMS Modeler
Role & Responsibilities :
1 Routing of pipe as per PI&D & PLOT PLAN
2 Extraction of Isometrics.
3 Preparation of BOM.
4 Preparation of piping GA.
5 Modelling structure as per plant layout.

4) Project Summary
Project : PANIPATH
Client : BHARATH PETROLIUM PLANT
Tools : PDMS
Environment : Windows XP
Team Size : 5
Role : PDMS Modeler

Role & Responsibilities:
1 Equipment Design On PDMS
2 Routing of pipes on PDMS Using P&ID & LAYOUT
3 Extracting isometrics from PDMS ISODRAFT.
4 Checking Iso’s and Piping GA Drawings as per P&ID
5 Preparing MTO’S
6 Modeling of STUCTURE as per plant layout.
Educational Qualification:
- Diploma in Mech Eng.With first class from Haralaiah polytechnic Bhalki (April2008)
- Pursuing B.TECH in Mech Eng 2nd from JNTU.
DESIGN SOFTWARE KNOWN:
1 Well versed in, PDMS 11.6 &12.0 design (Piping, equipment, structure, and cable trays). Isodraft, drafting.
2 Auto CAD
3 3-D PlantLINx, Cyclone (INVOX SOLUTION)
4 MS Office (Microsoft Word, Excel, PowerPoint).

[Guest]

CURRICULUM VITAE
ZABIULLAH AZMI
E – Mail :
1)zabiazmi AT gmail.com
2)zabi_azmi AT yahoo.com
Strengths :
- Mannered & Cultured
- Innovative & Creative.
- Hard working
- Determined
- Adaptive

PRESENT CTC :1.68Lac/Year
EXPECTED CTC :1.83 TimeRequired for joining : - Within one month
Objective :
To work with an organization this can offer me maximum exposure and utilize my innovation to optimum.
Education :

Professional Qualification :
Bachelors in technology.
College :
Gwalior Engineering College, Gwalior (MP)
University :
RGPV Bhopal
Work Experience :
- . PROJECT : AUGMENTATOIN OF VIJAIPUR KOTA PIPE LINE AND SUPRLINE TO CHITORGHARGH, RAJASTHAN as a QA/QC ENGINEER
- From JAN 2011 to TIL DATE
- PROJECT : AUGMENTATOIN OF VIJAIPUR KOTA PIPE LINE AND SUPRLINE TO CHITORGHARGH, RAJASTHAN as a QA/QC ENGINEER
- From JUNE 2010 to DEC 2010
- Project : ELECTROSTEEL STEEL LIMITED IN BOKARO as a QA/QC ENGINEER.
- From July 2009 to MAY 2010
Work Profile :
- To Interpreted radiography films as per ASME Code.
- All NDT related activities.
- Examine MPT & UT Testing.
- Loop clearance as per ISO.
- Coordinate for preparing WPS,PQR,IMR,WQT,EQT as per ASME section.
- Weld Visual Inspection & DPT Inspection.
- Welder Qualification Test.
- Loop clearance as per client.
- Preparation of all QA QC related documents.
- SR & RT Activities.
- To Attend the RT Repairs.
- To maintain good relationship with client.
Specialization :
- Mechanical Engineering
B.Tech Profile :
YEAR PERCENTAGE
- Final Year (2005-2009) 65%

Academics :

EXAMINATION BOARD YEAR DIVISION
- Intermediate JHARKAND. Board 2003 SECOND
- High School BIHAR . Board 2000 SECOND
Additional Skills :
- Level 2 (RT,UT,MPT,DPT)
- MS Office, Excel
- Internet surfing
Industrial Experience :
- six weeks training experience in "ELECTRIC LOCO SHED GHAZIYABAD (UP)
Project :
- Name of Project : “INCREASING EFFICIENCY OF TWO STROKE ENGINE USING ACTIVE REDICAL COMBUSIONS
- Role : Coordinator and in various other activities viz. Designing, Documentation, Purchasing etc.
- Duration- 6 month
- Under Guidance of- Mr. Manoj Kumar Dwivedi (Lecturer Mechanical Engg. Department)
- Completed during- B.Tech.(Final Year).
Achievements :
- Got volunternship in "FRESHER PARTY" and "ANNUAL FUNCTION" in the year 2006-2007, 2007-2008.
- Attended National Seminar on Power Steering System and Non Conventional Energy Resources and Utilization at Gwalior in 2009.

[Guest]

Education
- B.Sc, from Osmaniya University, Hyderabad.(1995)
- Diploma in Industrial Safety Management of Health Safety & Environment Training & Research Institute, Chennai.(1995)
- Basic First Aid & CPR Training Management of Health, Safety & Environment Training & Research Institute, Hamad Medical Corporation Doha-Qatar.(2004)
- International Construction HSE Principles Certificates – U.K. (2005)
- HSE for Supervisors, National Training Institue, MUSCAT (2008)
Summary of Experience.
Over 15 Years experience in India & Abroad as well, in the field of safety aspects in Civil, Mechanical, Electrical & Instrumentation, Pipeline, & Road works.
Present Engaged with MY HOME CONSTRUCTION, PVT LTD,
As a Safety Manager. For My Home JEWEL Project. Miyapur, Hyderabad.
April 2008 to June 2008 : Asst Manager Safety, Aker Kvaerner Powergas Pvt, Ltd. (MUMBAI) (consultants)
Project Details : EPC, Contract of ZINC SMELTER. (Dariba)Udaipur (RAJASTHAN) India.
Client : HINDUSTAN ZINC LIMITED. (UDAIPUR)

August 2007 to April 2008 Sr.HSE coordinator (Training) for Qarn Alam Steam Project. (Dodsal)
Client : PETROLEUM DEVELOPMENT OF OMAN. (MUSCAT)
Company Profile :
Multinational ISO 9001-2000 (Quality Management System) Certified EPC Company undertaking Green field and Brown field EPC and C M E & I construction contracts in Oil and Gas Facilities, Cross Country Pipe Lines, Pipe line and process Plant long term maintenance contracts in Oil and Gas Facilities.
MAJOR PROJECT HANDLING :-World’s largest enhanced oil recovery project. (900 million US Dollars contract)Qarn-Alam Steam Injection, Heat Recovery Steam Generators, Water Treatment Plant, Reverse osmosis plant and Oil & Gas Plant construction.
2005 to Aug 2007 Senior HSE Training Coordinator Dolphin Energy Limited (USA) Doha-Qatar. (QATAR-KENTZ)
1998 to 2005 Senior HSE Officer Gulf Housing Construction (W.L.L) Doha-Qatar. (Doha Asian Games Village)
1996 to 1998 HSE Officer Gayatree Projects Ltd, Hyderabad, A.P, INDIA.
Passport Particulars : No F1166659. (Expiry 27.10.2009)(OLD PP)
: No H7276942. (Expiry 24.01.2020)
Aspirations : To manage construction activities (Civil/Mechanical)
E-mail : pandu100704 AT yahoo.com .
Pandu100704 AT gmail.com
Pandu100704 AT rediffmail.com
Competence/Skills : Enhance HSE management, Interpersonal skills, International Mobility
Job Preference : Function HSE Management
Level Full Time
Travel Moderate (<100%)
Salary Range Negotiable
Relocation Fully Mobile
Family Status preferred
Training & Seminars done during the services
- Basic First Aid (CPR) from “Gulf Venture”– Hamed Medical Corporation Doha-Qatar.
- Basic First Aid & CPR from HAMAD MEDICAL CORPORATION-DOHA-QATAR.
- Fire Warden – JGC Middle East FZE.Ras Laffan, Doha-Qatar.
- Wire Rope Crane Inspection- JGC Middle East FZE.Ras Laffan, Doha-Qatar.
- Supervision & Leadership –. JGC Middle East FZE.Ras Laffan, Doha-Qatar
- Management in HSES – JGC Middle East FZE.Ras Laffan, Doha-Qatar
- General Safety – JGC Middle East FZE.Ras Laffan, Doha-Qatar
- Security Control & Monitoring – JGC Middle East FZE.Ras Laffan, Doha-Qatar
- Environmental Control & Monitoring – JGC Middle East FZE.Ras Laffan, Doha-Qatar
- Occupational Health – JGC Middle East FZE.Ras Laffan, Doha-Qatar
- Behavioral Based Safety – JGC Middle East FZE.Ras Laffan, Doha-Qatar
- Safe Work Method Statement – JGC Middle East FZE.Ras Laffan, Doha-Qatar
- Train the Trainer Certificate –JGC Middle East FZE. Ras Laffan, Doha-Qatar.
- Accident & Incident Investigation Certificate –JGC Middle East FZE.Ras Laffan, Doha-Qatar.
- Fire Safety Course
- Building Construction Safety Supervision.
- Lifting Supervisor Safety
- H2S/BA certificate
- Waste Management.
- First Aider
- Accident Prevention
- Journey Management System
- HSE Management Workshop
- Enhanced Site Supervision Workshop (ESSW)
Experience : 14 years
Nature of job done during the service period.
Supervise the recording, analysis of information on injuries, damage and production loss, and assessment of accident trends and the review of overall safety performances. Disseminate the information regarding learning points.
Monitor regularly and record the effectiveness of the HSE policies, Safety Procedures and existing work methods to ensure that necessary improvements are introduced.
Contacts HSE inspection and participate in HSE audits on established procedures/equipment on the regular basis with all site Supervisors as per HSE Plan. Prepare reports as required and monitor follow-up on corrective or preventive actions to ensure that safe working practices are in operations.
Monitor and suspend immediately any work which is considered to be dangerous, and record the suspension.
Identity and assist Management the needs of training for all levels of site employees and advise the Project Manager/Site Manager for follow-up and implementation to promote awareness of injury prevention & damage control. Update the training matrix as and when training has been performed & forwards a copy to the Head Office on monthly basis including subcontractors.
Identify the potential hazards, which have not been identified and ensure that that controls are in place for inclusion in the hazard register before work commences.
Ensure that the emergency equipment and procedures are adequate to take care of an emergency. Conduct regular drills and exercises test these and the emergency response or personnel including Sub contractors.
Ensure that the personal protective equipments in adequate, maintained and appropriate for use by the employees with respect to the specific job hazards.
Arrange for Safety Flashes/Alerts in the event of Near Misses/incidents and advice on the preventive measures needed to avoid repetition of the events.
Investigate all reported unsafe actions/near misses immediately.
Assist and investigate in serious accident or incident investigation.
Collect and compel HSE performance date and communicate findings to the Contracts Manager, Line Management and Client/Sub Contractors management. Interact with Site Manager, Site Supervisor, Engineers, Supervisors and workers.
Advise the Plant Supervisor about noted defects in vehicles, prevention of injury to personnel and plant/equipment and monitor the close-out of remedial measures.
Identify the areas of environmental shortfalls and advise on appropriate controls. Monitor the activities involving potential environment and advise the line management on corrective actions or appropriate control measure.
Improve HSE awareness consciousness amongst all Company personnel using standard training aids such as videos, posters, films, handouts, etc.
Provide topics for Toolbox Talks and monitor participation by all and Sub Contractors personnel. Assist line management and Supervisors in the presentation of toolbox talks when required.
Take part in :
a) HSE kick-off meeting.
b) Pre-start-up HSE audit
c) Construction kick-off meeting.
d) Weekly HSE & progress meeting.
e) Monthly & Weekly Company & contractor’s HSE meetings.
f) Emergency Drills.
g) Achieving 28.5 Million Man hours without LTI.
MALLIKARJUN VEMULAVADA.

[Guest]

CURRICULUM VITAE
T. Rama Raidu
Malkajgiri, Hyderabad
Email Id:
tramaraidu AT gmail.com
thallojurraidu AT gmail.com
tramaraidu AT rediff.com

CAREER OBJECTIVE :
To serve a challenging & outstanding position in progressive growth oriented organization, where my abilities & talents could be use to achieve the company’s goals in the field of different levels, where I can grow personally and professionally with complete skills.

Qualifications :
Diploma in Metallurgical Egg from Govt Polytechnic,kothagudem,AP
B COM in distance education from kakatiya University,Warangal,A.P
I.T.I. (Diesel Mechanic) from Bharath I.T.C., Shapur nagar, hyd.
S.S.C. from Z.P.H.S., Darga Husain Shawalli, Golkonda, hyd.

Additional skills :
ASNT Level – II in
Dye Penetrate testing
Magnetic Particle testing
Ultrasonic testing
Radiographic testing
Ms Office, D.C.A.

Training :
V.B.C. Ferro Alloys for 6 months training, Rudraram, Medak (dist)
MIDHANI for 6 months training, Hyderabad

EXPERIENCE :
Total Experience 4+ years
1. NDT 3 Years worked as an Inspector in Kumar’s NDT&Inspection Services R.C.Puram, Hyderabad from 01032007 to 31st July 2010
2. NDT 1 Years worked as an Inspector in Gamma Weld Inspection Services Balnagar,Hyd.From 20082010 to 15th july 2011
Job Location : QA/QC department in Bharat Heavy Electricals Ltd, Ramachandrapuram, Hyderabad, Medak.

Present working :
Cymainfratech Pvt Ltd, Raichur, karnataka from26th April 2012
UT testing of welds and forgings.
MPI
RT Interapetation

STRENGTHS :
Hard working nature
Good Listener
Ability to work in odd hours.
Self confidence

PERSONAL DETAILS :
Name : Thalloju Rama Raidu
Date of Birth : 02041982
Sex : Male
Nationality : Indian
Religion : Hindu
Marital Status : Single
Languages Known : Telugu, Hindi & English
Address :
Malkajgiri, Hyderabad500047.
DECLARATION :
I declare that the above given information is true and correct to the best of my knowledge and belief.
Place : Hyderabad
Date :
(T. RAMA RAIDU)

[Unregistered]

From Date : 27/06/13
RAJESWAR RAO.K

Sub : -Application for the post of AUTOCAD PIPING DESIGN ENGINEER

Sir,
With reference to the above please find enclosed herewith my CV for your kind consideration. I have put 3 years experience in preparation, and finalization of Piping/Mechanical drawings using Auto CAD Rel. 14, 2000 up to 2010 and also well Auto Lisp for various projects.

I assure you that if selected I will give my best to the company & up to the satisfaction of management.

Thanking you sir.
Yours sincerely,
(RAJESWAR RAO)

RESUME :
RAJESWAR RAO.K
Email : rajeswarrao736 AT gmail.com

Objectives :
A position as a Piping/mechanical Draughtsman, to work with oil & gas, refinery & power piping Through AutoCAD. Looking for a challenging and demanding position in Piping Design and Engineering in a growth oriented Mechanical Consulting, Contracting, Construction organization to render professional skills and add value to organizational growth and objectives.

CAD Software :
Autodesk AutoCAD Release12 to 2009 & Cad Work Plant Design Suite 2007, Cad Work Equipment.
Working on Computer Aided Design (CAD).

Nature of Work :
Draughting with AutoCAD Rel. 14 up to 2010
I have Good Knowledge of prepare of piping Isometric Drgs, Piping supports drgs. & Equipment Detailing, Detail Engineering drawings, Bill of Quantities, etc.

Projects handled :
Boiler External Piping & Internal piping
Heaters External Piping & Internal piping

Languages Known :
Languages known : English, Telugu
Able to : Speak, Read and Write

Company in Brief :
M/s. Bharat Heavy Plate & Vessels Ltd.(Govt. of India Enterprises) awarded ISO 9001 and responsible for executing Design, Detailed engineering works, Erection and Commissioning works of projects on lump sum Turnkey basis for Oil & Gas sectors, Industrial Boilers , Fired heaters, Cryogenic Air separation plants, System projects for Fertilizer Industry, Refineries, Steel Industry, Space Nuclear setup & Defense Sectors under third party Inspection agency EIL/ MECON/ DASTHUR/PDIL For National and International Clients.

Experience Details :
Apprentice : Bharat Heavy Plate & Vessels Ltd. (Govt. of India Enterprises)
Employer Address : Bharat Heavy Plate & Vessels Ltd.
Visakhapatnam-12, A.P., India
Training held : Mechanical Draughts man
Year of Joining : Dec 2006 to Dec 2009
Industry Experience : 3 years
Place of work : Visakhapatnam, A.P., India

Job specifications and Responsibilities carried :
Preparation of Piping Isometric Drgs. & Supports Drgs. & Mechanical Drawings for Boilers, Heaters, and Heat Exchangers etc.
Preparation of Pedestal Layout for HPCL-VIZAG BOILER,MUMBAI BOILER
Guidance for drafting staff working on Auto CAD.
Responsible for designing a mechanical system for a product intended functions, Create parts and assemblies of the mechanical system using CAD software, Simulate functions through use of 3d computer models and prepare and publish documents of design records such as exploded drawings, working drawing and parts list

INDUSTRIAL EXPERIENCE :
Training as DRAFTSMAN (MECH) on Computer Aided Design, Detailing of Supports & Isometric Drawings of Internal Piping & External Piping of Boilers & Heaters, Pressure Vessels, Columns, Reactors, Spheres etc. at Bharat Heavy Plate & Vessels Ltd., Visakhapatnam.

Educational qualification :
10th Class in the year 1995

Technical Qualification :
Passed N.C.V.T Draughtsman Mechanical With 60.0 %

Strengths :
I have excellent commanding from Auto cad & Msoffice
Determination, Positive attitude & Self Confident
Hard working.

Work experience :
Worked in AVINEON Pvt. Ltd. As a piping designer at cyber gateway, hyd.

PERSONAL DETAILS :
Name : R Rao Kavvampalli
Father name K.Mallaiah
Date of birth : 04-03-1980
Sex : Male
Marital status : Married
E-mail : rajeswarrao736 AT gmail.com

Signature
K.Rajeswar Rao

[Unregistered]

Shashi Bhushan Kumar
Mechanical Engineering
Maulana Azad College of Engineering & Technology, Patna
Magadh University, Bodh Gaya, Gaya

Objective :
To work in globally competitive environment on challenging assignments that shall yield the twin benefits of the job satisfaction and a steady-pace professional growth. My objective primarily is to provide all my skills as a Mechanical Engineer to the profit of an Organization in whose development lie benefit of all. I apart from my below mentioned skills have great enthusiasm to offer.

Educational Qualification :
B.Tech in Mechanical Engineering With 66% in December 2012 Maulana Azad College Of Engineering & Tech., Patna Magadh University, Bodh Gaya.
I.Sc (Science) With 51% in 2008 B.S.E.B, Patna
Matriculation With 60.85% in 2006 B.I.E.C, Patna

Training :
Pipe Line Design as per ASME B-31.3, from I.P.E.B.S Hydrabad

Key skills :
Strong verbal communication skills, especially in Native Language.
Can easily adjust to team work environments
Look forward to handle responsibilities.
Never Stressed & easily manages pressure.

Personal details :
Date of Birth : 08 -011992
Father’s Name : Ram Prakash Roy
Languages :English,Hindi

References :
Shall be provided on Request

Date : _____________
Place : _____________