www.essar.com Enginnering Services Ltd Delhi : Piping Designer/ Engineer

[deepika]

Essar Enginnering Services Ltd. - Essar Group
http://essar.com

Keywords: Piping Designer/ Engineer

Company Profile
The Essar Group is one of India's largest corporate houses with interests spanning the manufacturing and services sectors; Steel, Oil & Gas, Power, Shipping, Telecom and Construction. The group's enterprise value is approximately US $ 15 billion (Rs. 67,000 crores).

Essar Engineering Services Ltd (EESL) is a state-of-art detail & design engineering division of Essar Group which is currently working for Essar Oil project. Over the period, EESL has sucessfully completed several prestigious projects with Essar Oil. To augment our team in view of our proposed expansion and globalisation plans, we are looking for Piping Design Engineers.

Sr. Mgr/DGM/JGM - Piping Designer/ Engineer(Walkin at Delhi on 11 Sep)
Experience:
10 - 20 Years
Location:
Delhi
Education:
UG - B.Tech/B.E. - Mechanical

PG - Any PG Course - Any Specialization;Post Graduation Not Required
Industry Type:
Oil and Gas/ Power/Infrastructure/Energy
Functional Area:
Engineering Design, R&D
Posted Date:
08 Sep


Job Description
Walkin at Delhi on 11th Sep (10:00 am to 5:00 pm)
-- Preparation of Design Basis
-- Preparation of Plot Plan
-- Preparation of Equipment Layout
-- Preparation of Conceptual and Detailed Piping Layout
-- Selection and preparation of Piping Material Specification for utilities
-- Preparation of Valves and Specialties datasheets
-- Preparation of Piping Isometrics
-- Preparation of Material Take-Off
-- Preparation of Piping Tender Document
-- Performing Flexibility Analysis
-- Static
-- Selection and Design of Pipe Supports
-- Design of Spring Supports
-- Design of Expansion Joints as per EJMA
-- Vendor Evaluation
-- Preparation of Enquiry Specification for Piping
-- Techno Commercial Bid Analysis
-- Piping material specification
-- Piping & pipe fittings specification ,Valve & specialties data sheet for Enquiry Specification
-- Equipment General Arrangement Drawing
-- 3D modeling
-- Piping plan and sections
-- Nozzle orientation
-- Flexibility analysis report
-- Standard pipe support sketches
-- Material Take Off
-- Enquiry Specification
-- Techno commercial bid analysis
-- Vendor drawing review
Desired Candidate Profile
The incumbent must have piping design experience in a multi disciplinary surrounding with internationally renowned EPC Engineering Consultancy working for Refinery / Chemical / Petrochemical / Fertilizer / Pipelines / Infrastructure projects specifically in Hydrocarbon Industry. Exposure to site construction assignments shall be an advantage.
Conversant with national and international engineering standards, codes and practices applicable to Hydrocarbon / Chemical / Petrochemicals plant piping design. Proficiency in using latest application software for various fields of Piping Design engineering & drafting.

Executive Name:
Prachi Rokade (prokade@essar.com)

Address:
Not Mentioned

Telephone:
9833945899

[Guest-IJT]

CURRICULUM VITAE
MOHAMMAD ANWAR MALLICK Senior Piping Supervisor & Piping QC
MOHAMMAD AL-MOJIL GROUP (MMG),
CAMP TWO, JUBAIL INDUSTRIAL CITY,
POST BOX NO-1541, JUBAIL NO-31951,
KINGDOM OF SAUDI ARABIA:
MOBILE NO: +966561120683


SUMMARY OF EXPERIENCE
I have around 14 years work experience I have done May three years diploma in mechanical engineering, Iam worked as a Piping supervisor in Oil, Gas, power plant & Petro-chemical industries related projects. Excellent Knowledge of Isometric and General Arrangement drawings of Piping Structural and equipments as well as Erection and fabrication sound knowledge in API Standard and cods. Worked in CS / SS / LTCS / GI monal aluminum brass alloy steel and Hydro testing presently working with Mohammad Al-Mojil Group (MMG), Kingdom of Saudi Arabia working as “Senior Piping Supervisor”


EDUCATIONAL & TECHNICAL QUALIFICATION
- DIPLOMA IN MECHANICAL ENGINEERING with 2nd Class Passed from Oxford Polytechnic College Bangalore.
- 12th Standard Passed from JHARKHAND (BIHAR) INDIA.
- DIPLOMA IN COMPUTER APPLICATION (DCA) with first class from Indian Institute.

EXPERIENCE TRACK IN OVERSEAS:
PERIOD COMPANY / PROJECT / POSITION / WORK PLACE

Company : Mohammad Al-Mojil Group (MMG)
Project : Saudi Polymers. Project, Al-Jubail (KSA)
Client : N.C.P. Daelim Arabia LTD KSA
Position : Senior Piping Supervisor
Period : 1st April.2010 to till date. : (N.C.P) Daelim Arabia LTD. KSA

Company : Mohammad Al-Mojil Group (MMG)
Project : Kayan 21 off plot Petrochemical complex Project, Al-Jubail (KSA)
Client : Flour Arabia LTD KSA
Position : Senior Piping Supervisor
Period : 1st Septem.2008 to 28th March2010

Company : Mohammad Al-Mojil Group (MMG)
Project : Sharq3rd expansion Petrochemical project, Al-Jubail (KSA)
Client : Linde Arabia LTD CO. (LINARCO)
Position : Senior Piping Supervisor
Period : 28th Oct.2007 to 30 august 2008

Company : lahoud engineering company
Project : OGD 3rd Gass plant Habsan Abu Dhabi (U A E)
Client : Eastern Bechtel LTD.
Position : Piping Supervisor
Period : 10th Sep.2006 to 5th Sep 2007.




Company : lahoud engineering company
Project : G T L Raslaffan Ras gass (DOHA QATAR)
Client : Technip LTD.
Position : Piping Supervisor
Period : 29th Oct. 2005 to 13th March 2006.

Company : lahoud engineering company
Project : Saja Gass plant Sarjah (U A E)
Client : Petrofac LTD. CO
Position : Piping Supervisor
Period : 12th Apr.2005 TO 28 th Sep2005

Company : lahoud engineering company
Project : Al Hidd Power and Water Desalination Plant (BAHRAIN)
Client : Alstom power Itale LTD CO.
Position : Piping Supervisor
Period : 15th Jan.2003 to 10th Apr 2005

Company : GAMA AL MORSAGAH ARABIA LTD
Project : Hawayai gass plant (K S A)
Client : Saudi Armco
Position : Acting Piping Supervisor
Period : 6th June.1999 to 29th Sep 2001

EXPERIENCE TRACK IN INDIA
Company : Larson &Tarbo LTD
Project : Bokaro steel Plant Jharkhand (India)
Position : Acting Piping Supervisor
Period : 15th Des.1997 to 10thMar 1999

DATAILS OF EXPOSURE
- Quality management includes organization. Inspection planning & scheduling supervision
Documentation and procedure:
- Depth experience in fabrication & erection pipe spools, pipe supports, steel structure as per
Isometric & plant drawing plant:
- Having professional knowledge in utilizing basic jobs method and modern technique.
- To attend maximum productivity in the minimum duration.
- Well familiar with U/G RTR, GRP, & A/G process piping materials another codes of
Identifications
- Well knowledge to understand P&ID, piping layout Isometric piping class STD Pipe Support
Etc:
- Inspection all kind of mechanical work such as steel structure, Fabrication erection,
Alignment bolt tightening, and tank erection Fabrication etc.
- Preparing Scheduling of daily activities, manpower materials fabrication Erection supervisor
and inspect piping fit ups prior erection with in-force
- Prepare punch list of completed piping as per test packages.
- Supervise structural and torquing group of meet project schedule.
- Monitoring the revision status of all documents issued for the use of the projects.
Followed the ASME code for design of piping systems in process
- Hydro tasting, Punch list Clearance, pre–commissioning.
- Reinstatements of the hydrostatic tasted lines.
- Supervise structural and torquing group of meet project schedule.
- Knowledge air flushing and nitrogen filling.



PROJECT MANAGEMENT ACTIVITIES
- Discussions with client and consultant for work front availability and technical clarifications
- Discussions with subcontractor and subordinates to achieve scheduled targets
- Analyzing total scope and planning of site activities as per client requirements
- Discussions with top management staff and manpower
- Preparing weekly, monthly schedules for piping jobs and getting approval from clients.
- Preparing measurement sheets and getting approval from clients.
- Discussions with client for changes in routing of pipelines, deviation and site problems.
- Certification/Approval of subcontract billing.
- Preparing reconciliation statement at the end of project activities.
MECHANICAL CLEARANCE
- Freezing the hydro test loops from P&ID with the help of line schedule
- Preparing checklist and deploying appropriate manpower for liquidation
- Checking the isometric, GAD, P&ID and the lines list are latest revision
- Preparing as built isometric
- Incorporating as built isometric in GAD
- Checking of erection materials used, as per P.M.S
- Checking the coordinates, elevation and support as per drawings and standards
- Checking all vents, drains, on line instruments as per drawings and standards
- Checking adequacy of small bore support
- Checking internal grinding of flow orifice
- Getting clearance from the client after liquidating/client checklist
PRE-COMMISSIONING&COMMISSIONING
- Checking all fastener and gaskets provided are as per standard
- Arranging temporary inlet and outlet lines for flushing
- Checking the torque required for flange connection tightness
- Getting approval from client for box-up and pre-commissioning
- Provide flushing package with system & sub-system wise
- Carried out Field Inspections with system wise
- To provide complete work procedure for Pre-Commissioning activities
- To provide mark up P&ID, system wise for the leak test.
- Arranging manpower for flushing/temporary lines for flushing
- Selecting and arranging pressure gauge blinds hydro test pumps and compressors for the loop being tested
- Checking for temporary arrangement of support for heavy volume pipes
- Checking leaks and pressure drops
FABRICATION&ERECTION
- Reading and comparing isometric with G.A.D & P&ID
- Preparation of isometric for small bor
- Planning for fabrication, erection depends upon the manpower, materials,
- Checking the materials as per P.M.S for the particular line using stamping ,color codes
- Arranging manpower, tools and tackles, consumables for making fit up
- Checking fit up as per standards and codes
- Coordination with the client for fit up inspection and clearance
- Arranging manpower for fabricating special samples coolers, long radius bends from pipes if required
- Stacking of fabricated spools with identification marks
- The erection Planning of pipes as per work front availability
- Arranging manpower to shift the piping spools from fabrication yard to erection site
- Preparing the erection schemes for heavy lifts with cranes
- Checking the coordinates, elevation and length for pipe being placed





FLUSHING & TESTING
- Coordination with QA/QC department for QC clearance
- Arranging manpower for flushing/temporary lines for flushing
- Selecting and arranging pressure gauge blinds hydro test pumps and compressors for the loop being tested
- Checking for temporary arrangement of support for heavy volume pipes
- Checking leaks and pressure drops
- Offering for hydro test to clients for approval
- Maintaining the test records

Training & seminars Attended:
- Crane and Rigging Safety Training Course, Emergency Preparedness & General Safety Course,
- Working on height safety training, confined space entry safety training course,

Additional IT Skills:
- Well versed with Desktop Operating Systems like Windows XP/ Windows 2007 & Win Vista.

Personal Details:
NAME : MOHAMMAD ANWAR MALLICK
FATHER NAME : ASHARF MALLICK
DATE OF BIRTH : 15th JUNE 1974.
SEX : MALE
NATIONALITY : INDIAN
MARITAL STATUS : MARRIED
LANGUAGE KNOWN : ENGLISH, HINDI, URDU, ARBIC.
RELIGION : ISLAM

PASSPORT DETALS : PASSPORT.NO - F-6246501
: PLACE OFF ISUE - RANCHI
: DATE OFF ISUE - 13 APRIL 2006
: DATE OFF EXPIR - 12 APRIL 2016


Permanent Address:
S/O – ASHARF MALIK
C/O _ MALLICK KHATALWALA,
POST – SEWANDIH, AZAD NAGAR
Dist. – BOKARO STEL CITE, (Jharkhand) INDIA,
CONTACT NO: 0091-9204101766
0091-8092497418
Email:anwarmallick17 AT yahoo.com



The above information furnished is correct to the best of my knowledge Opportunity
to work in your organization, I will prove my self to the Best. If given

PLACE: Saudi Arabia (MMG)
DATE: 20_JULY_2010 (MOHD ANWAR MALLICK)

[Guest]

PRERANA BAGHEL
E-mail : prerana.baghel AT gmail.com
Looking for a challenging career which demands the best of my professional ability in terms of technical & analytical skills & helps me broadening & enhancing my current skill & knowledge.

SYNOPSIS
________________________________________
- B.E. (Applied Electronics & Instrumentation Engineering) from Chhattisgarh Swami Vivekananda Technical University, Bhilai.
- Successfully completed project work on “FOUR MODE TIMER” as a part of study curriculum.
- Keen interest in updating self about industry & economic trends in India as well as International Markets.
- Possess a flexible & detailed oriented attitude. Adaptable and a quick learner.
- Acquire skills to work under pressure situations.
SCHOLASTICS
________________________________________
B.E. (Applied Electronics & Instrumentation Engineering), RCET, Chhattisgarh Swami
Vivekananda Technical University, Bhilai 2011, 64.38%
XII Bhilai Nair Samajam Higher secondary School (CGBSE, Bhilai) 2005, 51.6%
X Bhilai Nair Samajam Higher secondary School (CGBSE, Bhilai) 2003, 64.67%
COMPUTER SKILLS________________________________________
Packages : MS Office (Word, Excel & PowerPoint)
Operating System : Windows XP & Windows 7
Languages : English
ACADEMIC PROJECTS________________________________________
Title : - 500-Watt MOSFET Based PWM Inverter
Duration : 3 Months
Team Size : 1
Description : Study about PWM Inverter, a device which by storing energy in a battery which is charged by electric supply, supplies power during power failure. This is done by converting DC to AC by various methods.
Title : Four Mode Timer
Duration : 3 Months
Team Size : 3
Description : Study about four timers which has inbuilt clock time which tracks over the real time. The main objective is to control and operate the four different modes of timer by a driver chip with the help of electrical circuits.
VOCATIONAL TRAINING
________________________________________
Bhilai Technical Institute, Bhilai Steel Plant, Bhilai, (C.G.)
Bharat Sanchar Nigam Limited, Raipur, (C.G.)
EXTRAMURAL ACTIVITIES & ACCOLADES
________________________________________
- Active member of Instrumentation Engineering association in R.C.E.T. Bhilai
- Won various awards for debates and elocution competition at school level.
- Won various prizes for interschool song and dance competition.
- Secured 1st position in General Knowledge competition.

[Guest]

RAJAT JAISWAL
E-mail : rajat.jaiswal1313 AT gmail.com
To obtain a career with an organization having a strong background that provides me motivating environment to foster my technical and innovative skills and where I can work for the development of organization and can grow professionally and be rewarded financially.

2011 Diploma in Electronics Engineering
From Feroze Gandhi Polytechnic Raebareli.
Affiliated to Uttar Pradesh Board of Technical Education.

2005 XII from G.I.C. Sonebhadra.
Affiliated to U.P.Board.

2003 X from G.I.C. Sonebhadra.
Affiliated to U.P.Board.

- Area of interest : Basic Electronics & Electrical , Digital Electronics.

- 4 weeks Vocational Training at “RENUSAGAR POWER DEVISION(HINDALCO) during summer of 2009-2010.

- Travelling , Spending time with myself
- Listening Music

Human less automatic railway gate control based on IR sensor