www.technip.com KT India Noida Delhi Mumbai : Process, Piping, Instrumentation, Electrical

[job.bot]

Technip KT India

http://www.technipktindia.com
http://www.technip.com

Typical job opportunities available at Technip KT India:

Process design
Piping engineering
Combustion engineering
Civil / Structural engineering
Instrumentation
Electrical
Engineering co-ordination
Procurement
Inspection & Expediting
Project management
Sales & Marketing
Planning, scheduling / Cost control / Estimation
Commissioning
Designer / Draftsman

Career:
A wide range of opportunities exists to work on a number interesting project under various stages of execution, both within India and abroad.

This exciting growth phase of the company needs energetic, dynamic and result–focused professionals in various engineering disciplines.


Typical positions offered at our office
The following job opportunities are generally available at Technip KT India.

Please note that:

For all positions except Designers / Draftspersons, the candidate should be First Class graduate engineer with relevant experience of 3-20 years in the Hydrocarbon Industry.
Employment will be based at Noida, India
There may be support functions (Accounts, Admin, HR etc.) opening as well from time to time

Should you wish to apply for a position or send an open application, please contact:
hrs-tpkti@technip.com


Main office
Technip KT India
Technip Tower
A-4, Sector-1
Noida - 201 301
India

Tel: +91 120 4301 000
Fax: +91 120 4301 010

E-mail : sales-tpkti@technip.com


Registered office
B-22, Okhla Industrial Area, Ph-I
New Delhi - 110 020
India

Tel: +91 11 2681 2439
Fax: +91 11 2681 3664


Regional Office
5th floor, F - Wing, Solaris - I
Saki Vihar Road, Andheri (East)
Mumbai, 400 072
India

Tel: +91 22 6671 7700 / 20
Fax: +91 22 6671 7710

Technip:
A WORLD LEADER IN ENGINEERING, TECHNOLOGIES AND PROJECT MANAGEMENT FOR THE OIL AND GAS INDUSTRY.

Backed by 50 years of experience and thanks to the expertise and know-how of its teams, Technip is a key contributor to the development of technologies and sustainable solutions for the exploitation of the world’s energy resources.
Technip is listed on Euronext Paris (EURONEXT: FR0000131708).

23,000 employees in 46 countries
Industrial assets on five continents
A fleet of 19 vessels by 2010
Operating income from recurring activities: €247 million
Revenues: close to € 7.9 billion

Technip KT India:
Technip KT India is a technology driven, environment and safety conscious EPC contractor serving Oil & Gas (Upstream & Downstream), fertilizers, chemicals, pharmaceuticals and connected market sectors on a global basis.

We are a wholly-owned Technip group company located at Noida in the vicinity of New Delhi, India.

A staff of more than 500 experienced professionals from the industry executes complex projects in process industry on lump sum turnkey (LSTK) basis with full responsibility up to commissioning. Each project is handled by a strong team of dedicated engineers who are committed to providing cost effective and timely solutions to its customers while maintaining high quality standards.

[rahul.chaubey]

Refer to your mail , i am interested to offer my candidature for post of proposal/Marketing engineer

RAHUL CHAUBEY
ENGINEER(MECHANICAL)

B-32 AIRPORT APARTMENT HOME 011-28539032
VIKASPURI PASSPORT NO G2486818
NEW DELHI-110018 MOBILE: 09176487005
rahul_chaubey39 AT yahoo.co.in

Proposal Engineer:- HRSG Power plant

OBJECTIVE:-
To associate myself with a professionally driven esteemed organization which offers continuous challenges and excellent growth prospects, where I could contribute significantly to the organization through conceptual and technical skills

PROFESSIONAL SYNOPSIS

- Presently working with FLSmidth Private Limited as a Proposal engineer in Waste heat recovery power plant department .
- Considerable versed with the knowledge of BTG equipments
- Pro-active exposure to heat recovery and design methodology for Boiler and connecting equipments
- Strong analytical market research with unified exposure of market potentiality skills.
- Approach the market potentiality of waste heat power plant with actionable result.

PROFESSIONAL EXPERIENCE
FL SMIDTH-CHENNAI JANUARY 08---TILL DATE
FLSmidth is a 125 year old Denmark based worldwide and largest engineering construction companies in India providing integrated design, engineering, procurement, construction and project management services for Cement and energy industry(WASTE HEAT RECOVERY POWER PLANT). To ensure the company’s leading market position, F.L.Smidth invests massively in technological innovation like Waste heat recovery power plant , R&D and training worldwide.

PROPOSAL ENGINEER

ACCOUNTABILITIES:-
- Preparation & Presentation of Pre Qualification documents
- Tendering & Procurement Activities

- Engineering the sizes of equipments in line with HMBD & Preparation & Review of Plant BOQ in coordination with Design Team.
- Preparation of offer &RFQ by performing Pre Bid designing of Plant BTG,BOP,BOM & Piping System in coordination with Design team
- Preparation of Technical & Commercial proposal in line with Tender specification and Contractual conditions(Including IRR & NPV)

- Commercial & Technical evaluation of BTG & BOP (Vendors offer).
- Cost Working by selecting best offers from the vendors
- Attending Negotiation & Clarification meetings with Clients, Consultants & Sub Vendors.

¦ MACAWBER BEEKAY PVT LTD JUNE 05- JANUARY 08
More than 700 Crore organization that provides Turnkey project of BULK MATERIAL CONVEYING in thermal Power plant, cement, sponge iron and steel Sector. Established in 1984 as a joint venture company in Technical collaboration with CLYDE BERGMANN Materials Handling Ltd Of U.K.

PROPOSAL ENGINEER
As a Proposal Engineer i have charge to:-

- Being in power plant sector I use to make complete techno –commercial proposal for the project, involving all resources relative to design, production, pre-proposal & proposal phases. This include

- Review, interpret & clarify customer work request & specs.
- Provide Performance data (both expected & guaranteed), with detailed estimation including all legal obligation of contract.
- Work with Design Engineering & Sales to assure technical support of proposals.
- Support bid reviews & proposal clarification / negotiation meetings.
- Develop appropriate market strategy and ensure the same is followed.
- Attend customer user group meetings and exhibits to promote sales leads and assist with Converged product demos.
- Attend pre-bid clarification discussion get it completed with interrogating Engineering department

Notable Accomplishment:
- Forged new Relationship with new customer in multi region Territory
- Increased specified assignment by 10% in 20 month period
- Incresed Northpoint Business by 20%

EDUCATION
1) M.D.UNUVERSITY
Bachelor of Engineering in Mechanical

Year 2005
2) Persuing MBA
IMT-Ghaziabad
TECHNICAL KNOWLEDGE
E.R.P, Foxpro, Microsoft office, Excel,Internet
Basic Knowledge of AutoCad
PROJECTS UNDERTAKEN

Name MEASUREMENT OF CRITICAL SPEED OF SHAFT
(Equipment developed to measure the critical speed of shaft
Here an Aluminium rod was used as shaft )
Inst PDM College of Engineering

TRAINING PROGRAMME ATTENDED

1. Training in Engine overhauling at Airport (MT Section Cargo)
2. Jindal steel at Hissar


SEMINAR :- HYDROELECTRIC POWER PLANT
MY STRENGTH:-
Strategic Thinking,
Analytical abilities,
Leadership Initiative,

ACHIVEMENT

Got a Participation certificate for my project in inter college science Exhibition held at our college

Date: (RAHUL CHAUBEY)

[Guest]

To
The Head HR
Subject: Cover Letter and Resume for an Informational Interview: looking for new better opportunities - Sales & marketing / Business Development

Dear Sir / Madam,
Building…

It’s what I do for a living.

No, not in the traditional hammer & nail sense, but in the business sense – whether it’s building a marketplace for a product I’m selling, building an everlasting relationship with clients, or building a business.

The oil and gas industry has been instrumental in fuelling the rapid growth of the Indian economy. After my master’s in Oil & Gas Sector I have joined a marketing & service providing organization in Oil & Gas market to utilize my engineering knowledge & managerial skills. I created a business development plan and marketing strategy to reach the unattended Coal Bed Methane sector – in addition to E&P and refinery; spreading out our business potentials ultimately we built an incredibly strong client base that helped our company growth.

In working closely with our clients and principals, I have learned the technical as well as commercial aspect of oil & gas sector business. Let me show you how your requirements for the position coincide with my qualifications & experiences.
- MBA (Oil & Gas Sector - Upstream Asset Management) and B.Tech (Production Engineering), academic achievements and valuable projects & internship experiences with organizations like IOCL, HPL, GRSE, SISI.
- I am analytical, detail oriented with strong coordinating skills; work diligently on long, tedious assignments.
- I have excellent interpersonal communication, time management, and problem resolution skills. Command in presentation making & presenting.
- Above 70% marks throughout the academic career.
- More than one year experience in marketing & business development of oil & gas sector equipments. Besides this I have experiences in Business Development from other sectors.

Please refer to the enclosed resume to further substantiate my education and experience.
Though a resume is a good way to help sort the possible candidates from the probable candidates, telephonic or face-to-face interview are the best way to judge the true caliber of an individual. I would appreciate the opportunity to meet or talk with you soon. Thank you for considering my application.

Sincerely,
Amitava Nath
E-mail: n.amitava AT gmail.com
Mobile: +91 9911984096 / 9871706425

Enclosure: RESUME [Amitava Nath_MBA (Oil & Gas Sector)_BTech (Production Engg)]

___________________________________________________________________________
Amitava Nath
3rd Floor, 30/17 West Patel Nagar, New Delhi (W) – 110008
E-mail: n.amitava AT gmail.com Mobile: +91 9911984096 / 9871706425
____________________________________________________________________________

Career Objective
To secure a challenging growth oriented position in a high growth company with considerable advancement opportunities. Ideally, in a business development capacity with an emphasis on strategic planning.

Summary of Qualification
- Having MBA (Oil & Gas Sector - Upstream Asset Management) and B.Tech (Production Engineering), academic achievements and valuable projects & internship experiences with organizations like IOCL, HPL, GRSE, and SISI.
- Analytical, detail oriented with strong coordinating skills; work diligently on long, tedious assignments.
- Maintain excellent interpersonal communication, time management, and problem resolution skills.
- Proven ability to build strong customer/client relationship.
- Track record for consistently meeting goals & delivering a high level of job performance.
- ISO 14001:2004 Certificate Course from Moody ICL Certifications.

Professional Experience
- Marketing Services International, New Delhi.
Sept ‘08 – Present
Designation: Sr. Manager – Marketing & Business Development [Got promotion within six months from joining, Dy. Manager to Sr. Manager.]
Job Profile:
oResponsibility of Business Development in East & North East India, for mechanical product.
oSpecial responsibility to do the Market Research & Business Development for a newly launched product in India for Oil & Gas and CBM E&P Sector.
oSpecial focus on Coal to Liquid (CTL) Technology & Coal Bed Methane (CBM).
oNeed to submit periodical business strategy report for our product depending upon the changing market conditions.
oEstablishing rapport with existing and prospective clients. Development of new clients through presentations, conferences and technical discussion on available products and services together with the representatives of Company’s Principals.
oComplete project handling, from RFQ generation to Technical & Commercial Discussion, Price Negotiation & necessary follow ups to finalize any order.
oKeeping track of competitors’ activities.
oSubmission of periodical reports, including reports on latest developments in the industry, to the Company and its Principals.
N.B.: As a part of Performance Incentive, within six months of my joining I was sent to Dubai-Abu Dhabi to attend a business meeting along with three days tour package.

- University of Petroleum & Energy Studies, Dehradun
May ‘07 – April ‘08
Job Profile:
oHelping University marketing team in business development activities, event management thru arranging seminars, cultural events like IGNITE & UCOST’08
oSoftware, Hardware related activities.
oHelping students to get habituated with presentations & improving their presentation skills.

- Dwarkeshwar Forging & Fabrication, Kolkata
June ‘05 – May ‘06
Designation: Production Engineer
Job Profile:
oProvide engineering support for a product or range of products through all phases of product development and manufacturing.
oCoordinating with sales force for product planning and product marketing.

Paper/Poster Presentation
- Total Quality Management towards Total Customer Satisfactions.
- Ergonomics in Work Shop to improve work and job culture.
- Energy Independency: Indian Energy Sector.
- Clean Coal Technology: Environmental Study.

Relevant Experience
MBA:
- Summer Project: Preparation of Techno-economic model under NELP Fiscal Structure, with Indian Oil Corporation Limited, E & P Section, New Delhi.
- Dissertation topic: Managing Risk Uncertainty & Investment Decisions in E&P Sector; under the Guidance of Dr. Mandira Agarwal & Mr. Vikas Kumar, UPES, Dehradun.
- Special Project work: Clean Development Mechanism (CDM) Prospects for Coal Bed Methane (CBM) Projects in India: a feasibility study.

B. Tech:
- Project: A design approach of kinematic structure in lathe for machining spherical jobs…a feasibility study, Under Haldia Petrochemicals limited (HPL), Haldia.
- Summer Training:
- Small Industries Service Institute, Under Ministry of SSI, Govt. of India, Kolkata.
- Garden Reach Shipbuilders & Engineers ltd, Under Ministry of Defence, Govt. of India, Kolkata.

Education
MBA in Oil & Gas (Upstream Asset Management) from University of Petroleum & Energy Studies, Dehradun. CGPA - 3.13/4.00
Year of passing – 2008


M.Tech in Manufacturing Technology from National Institute of Technical Teachers Training & Research (NITTTR), Kolkata – Under Ministry of HRD. [Incomplete due to MBA admission]
Year 2005-06 (1st Year)

B. Tech in Production Engineering from Haldia Institute of Technology, Under West Bengal University of Technology.
Degree Grade Point Average (DGPA) – 7.92/10.00
Year of passing – 2005

Higher Secondary (12th) … 72.3% Marks … 1st Division [WBCHSE]
Secondary (10th) … 84% Marks … 1st Division [WBBSE]

Computer Proficiency
- Operating System: Windows XP, Vista.
- Design Software : Auto CAD 2000, PRO-Engineering, CATIA V5R7.
- Software Package: Microsoft Office 2003, 2007.

Awards received & Achievements
- Merit certificate under National Scholarships Scheme (Madhyamik Pariksha’98, W. B.).
- Member of winning team in the Zonal Inter school football Championship’96, Howrah.
- Placed Second in All India Camel Color contests’95.
- Placed Second in All India SIT & DRAW competition ’96.
- Certificate under all India Physics Teacher Council Physics exam, in 10+2 level.
- Captain of school Football team in ‘Subrata Cup’ championship.
- Member of college magazine “ABINITIO”, “BARNALI”; In-Charge of Decoration Committee of College (HIT) fest. RIVIERA’03 & Fresher’s welcome committee.
- Member of finalist team in inter college football & volleyball tournament.
- Executive Member & souvenir designer in UPES Tech-Fest (IGNITE & UCOST’08).
- ISO 14001:2004 Certificate Course from Moody ICL Certifications Ltd.

Personal Details
- Name AMITAVA NATH
- Date of birth 27th April, 1982
- Languages known English, Hindi, Bengali, German (Basic)
- Nationality Indian
- Passport No. F2212782

Hobby
Painting, Pencil sketching, Innovative sculpturing (with clay, chalk, wood, paper etc)

References
On request

[pradhan_ajit287]

respected sir,
my self ajit kumar pradhan a self motivated , hard working & confidence person
working in an organisation having 2.5 years experirnce in the construction field. my qualification is B.TECH Mechanical. I ve also ASNT Level ll in RT , LPT .
if an opportunity is given to me .I assure that I shall make endeavor possible on my part to the worthy for your confidence and save organization loyally with all positive efforts.
my mobile no is 9727142043.

[navdeep1234.garg]

RESUME
NAVDEEP GARG

Permanent Address:
ASHOKA BUILDING WORK, NEAR OBC BANK, BALRAIN ROAD,JAKHAL MANDI.(FATEHABAD)
PIN 125133
E-Mail ID:
Navdeep1234.garg AT gmail.com
Phone no:
09812328712
09316352770

Personal Data:
Father Name : Sh. Vinod Kumar Mother Name : Smt. Sudesh Rani
Date of Birth : 27th July,1988
Age : 21 Years
Gender : Male
Nationality : Indian
Marital Status :Single
Language
Proficiency :Hindi, English, Punjabi


Career Objective:
To secure a creative and challenging position with professionally managed group. A position, which will utilize my practical and theoretical experience and planning and provide an opportunity for professional and personal growth.
Personal Attributes:
Adaptability to different surroundings, team spirit, punctuality, learn ability, willing to travel, good interpersonal skills, Honest, dependable, Excellent, Interpersonal Skills work well under pressure. Flexible and quick Learner
Educational Qualification:
Degree Year of Passing University/
Board School/
College Percentage
B.E (M.E) 2010 Maharshi Dayanand University Vaish college of Engineering, Rohtak 68%
XIIth 2006 P.S.E.B Govt. Sen. Sec. School, Sangrur 64%
Xth 2004 H.B.S.E Govt. Sen. Sec. School, Jakhal 72%
Technical Skills:
- Design software : AUTOCAD(2D&3D), CATIA V5
- Others : MS-Office
Curricular Activities:
- Participated in the annual functions at school level.
Training Detail:
4-Week summer training on Goyam Screw Press, Ludhiana(Asia's First Company Exporting All Steel Construction Oil Expellers To Europe)
- Study of various types of Oil Expellers
- Study of various manufacturing processes like casting, machining, joining etc.
Project Profile:
Alternate Car Fuel ( Working on Blended Fuel -E50 )
Brief detail of project:-
In our theoretical study we find stoichiometric Air-Fuel ratio of Ethanol is 9:1 and the same for Gasoline is 14:1.
In our experimental setup we tune our fuel injector in such a manner that it provides a proper air fuel mixture. We also replace cast iron rings of cylinder by chrome rings to bear the excess of pressure.
At the end we conclude that the cost of fuel is decreased by 30%, but average is decreased by 12%. Overall we save 18% of fuel which in itself a great achievement.
Hobbies:
- Computer Tricks & Hacking
- Listen Punjabi Song

Strengths:
- Hard working and disciplined towards assigned job.
- Thrust for knowledge and for implementation of new ideas.
- Total commitment attitude to work with ability and problem solving skills.
- Desire to gain more knowledge.
Declaration:
I hereby declare that all the above information is true & correct to the best of my knowledge.

Place: ( Navdeep Garg )

[shiva.me2012@gmail.com]

Shivram Yadav
E-mail. Shiva.me2012 AT gmail.com
Objective
To obtain a position in Technical field where excellent Analytical and Technical Skill can help to improve company’s Profitability.
Professional Qualification

- Pursuing Postgraduate diploma in Piping Engineering, from Suvidya Institute Of Technology, Mumbai.
- Pursuing B.Tech.(Mechanical Engineering), from F.E.T R.B.S. College Agra affiliated to Uttar Pradesh Technical University, Lucknow with year wise result as follows :
Qualification Branch / Stream Year of passing College/ School University/ Board Percentage of Marks
B.Tech.4th Year
(VII Sem) M.E. 2012 F.E.T. R.B.S. college Agra. U.P.T.U. 70.00%
B.Tech.3rd Year M.E. 2011 F.E.T. R.B.S. college Agra. U.P.T.U. 61.60%
B.Tech.2nd Year M.E. 2010 F.E.T. R.B.S. college Agra. U.P.T.U. 60.00%
B.Tech.1st Year

M.E.
2009 F.E.T.R.B.S
College Agra
U.P.T.U
54.50%
Academic Qualification
- INTERMEDIATE with Science stream (P.C.M.) from U.P. Board in year 2007 & HIGH SCHOOL Qualified in U.P. Board in year 2005 respectively.
Qualification
Branch / Stream Year of passing College/ School University/ Board Percentage of Marks
Class 12th Science 2007 B.R.D.I.C.Uttam Nagar Bhujahi Azamgarh U.P. Board 70.40 %
Class 10th Science 2005 B.B.S.K.College
Bageshwar Nagar
Azamgarh U.P. Board 68.50 %
Computer Skills
Languages known : Basic, C, C++, HTML
Operating Systems : Windows XP, Window 7, Windows vista, LINUX
Front End : MS Office, Automatic Computer Aided Design, PDMS and CAESAR II.
Project/ Industrial Training Profile
- Summer Training III- year
Organization : Diesel Locomotive Works VARANASI
Duration : 30 Days
Methodology : In Production
Location : Varanasi U.P.
- Working on the project “Manufacturing and Analysis of CNG powered Two Wheeler.”
Seminars Delivered
- Delivered a Seminar on “Diesel Particulate Filter” in Third Year for fulfillment of degree requirement.
Strength
- Can work effectively with diverse groups of people.
- Friendly with an upbeat attitude.
- Fast learner, adapt well to changes and pressures in workplace.
- Committed to deadlines and schedules.
- Sincere with a high level of Integrity.
- Self confidence.
- Optimistic.
Declaration
I hereby declare that the above information is true to the best of my knowledge. If given a chance, I will try my best to come true to your aspirations & leave no stone unturned in achieving the goal.
Place : Agra
Date : __________ (Shivram Yadav)

[Guest]

RESUME
ANKIT JAIN
Email : jain8ankit AT gmail.com

Objective
To explore my potential. Willing to work as a key player in a challenging and creative environment. To achieve perfection in my field.
Professional Qualification
- B.TECH in Electronics&Instrumentation (2006-2010) from S.I.E.T(UPTU) with 68% aggregate.
Academic record
DEGREE NAME OF BOARD PERCENTAGE YEAR OF PASSING
X UP 57% 2004
XII UP 56% 2006
Electronics Proficiency
Comfortable with the following application packages :
- Power Electronics & Electronics Measurements
- Automatic Control
- Microcontroller 8051

Summer Training
- I thank to Central Electricity Authority for providing me practical
atmosphere
Project Undertaken
Title : Automatic temperature sensor using serial communication.
Members in team : 2
Duration :6 Month

Work Experience
- Working as a service engineer in ROCHEM SEPARATION SYSTEM INDIA Pvt. Ltd.(sub contract : VISION WATER Pvt. Ltd.),May 2011 to till date.site for JUBILANT LIFE SCIENCES Ltd.
Job Description
- Erection & commissioning of the RO plant.
- Service maintenance
Date………………………………..
Place………………………………. Signature of Applicant
( ANKIT JAIN )

[Guest]

Dear Sir,
Please accept the enclosed updated resume as an ex-pression of interest in exploring employment opportunities with your organization as a Safety Supervisor. As a candidate I bring along over 16 years of solid experience. I am a NEBOSH certified HSE professional having experience in the field of OIL & GAS, CONSTRUCTION,PIPE LINE,REFINERY as well as PETROCHEMICAL(Offshore and Onshore)
Currently I am working with JGC ARABIA LTD. Saudi Arabia For Saudi aramco project as a Site HSE Coordinator . I am looking forward to hear from you at the earliest.

CURRICULAM VITAE
Jayashankar .C
E - Mail – jsc1091 AT rediffmail.com
Highly, motivated, energetic, skilled and NEBOSH SAFETY professional with over 16 years
of experience in India & Middle east seeks career advancement in the field of HSE
Extensive experience in Risk Assessment, Hazard Analysis, Communicative,
Consistently exceeding both client and Management goals.
Post Applied for * HSE Supervisor.

Professional Experience :
* 16 Yrs
Date of Birth * 01-04-1965
Academic Qualification * Pre Degree
Technical Qualification * Diploma in Mechanical Engineering.
* NEBOSH. IGC
* Diploma in Fire & Safety form Indian Institute of
Management & Technology Chennai; India.
* Computer Operating
P&J Safety Training * Compressed Gas, Fire Prevention, Hazardous Material
Slips Trips and Falls, Power Tools, Egress, Ladder&
Scaffolding, Lifting Safety, Aerial Personnel Basket Painting safety, Machine Guarding, Lockout, Tag out, Hand Tools, Electric Safety, Construction Safety, Crane &Slings safety, Evacuation, Fall Protection, Excavation
Training & Seminar * Incident & Injury-Free (IIF) Training by JMJ .
* Approved as Safety Supervisor by Saudi Aramco
* Permit to Work (PTW) course by Qatar Petroleum
* R.P.D. License from ministry of radiation protection
Department State of Kuwait.
* H2S / BA familiarization course by Qatar Petroleum
* Fire Fighting course by Safety Department (QP).
* First Aid.
- Valid Saudi Government Driving License
Additional Qualification :
* ASNT – Level – II RT
* ASNT – Level – II MT
* ASNT – Level – II PT
* ASNT – Level – I UT

Professional Experience :-
1. Present Position : Field HSE Senior Supervisor
Company : JGC Arabia Ltd.(Saudi Arabia)
Client : Saudi Aramco
Project : Crude separation & Utility project.
Tenure : From 1st Aug. 2009 - till present
Reporting to Safety Manager, Contribution towards developing improvements in Health and safety.
Preparation of documents comprising of Method statements, Risk assessment reports. Co-ordination
with Client Crew, reviewing and monitoring the implementation of PTW system , Participation in
interpretation and implementation of safety legislation , verification of third party certifications and
documents. Site Audits and Inspections.
PRIMARY DUTIES & RESPONSIBILITIES
- Inspection of Crane and Other Heavy Equipments
- Monitor contractor construction Safety program and safe work practice.
- Review and Evaluates Contractor Safety information.
- Assist project Team in Identifying project Safety concern.
- Review adequacy Safety system in design and contractor Safety process.
- Provide Safety and Health information/expertise to the site team.
- Provide Safety training to the site team as required.
- Ensure Safety section of the contractor bid document is complete.
- Inspect and audit construction site and labor camp.
- Verifies appropriate equipment and procedure for safe work performance.
- Conduct Safety meeting as needed.
- Leads toolbox talks on a daily basis.
- Assist in the selection of contractor.
- Participate in meeting involving contractor safety problems.
- Support contractor Safety Award program.
- Monitor/Track contractor injury report.
- Provide input for HSE report to project management.
- Participate in Incident investigation as required.
- Monitor contractor Occupational Health program implementation.
- Participate & Monitor the implementation of contractor Emergency response plan and drill.
- Ensure site Emergency response plan are in place and are tested in a planned and regular manner.
2. Position Held : Safety Supervisor
Company : Snamprogetti Saudi Arabia Ltd.
Client : Saudi Aramco.
Project : Gas Treat and Compression/LNG recovery projects
Tenure : From.Aug.2007-April.2009
Reporting to HSE Manager. Ensure personnel are fully aware of Basic safety practices and company HSE policies and procedures. Participate and facilitate hazard identification studies and risk assessments as part of work-pack and pre-job assessments .Conversant with the induction Process .Participate and encourage effective tool-box talks and on-site pre-job checks ,Identify and implement training, instruction and support needs to all project personnel in relevant areas of HSE. Communicate new or existing safety legislation, approved codes of practice and procedures to ensure compliance
3. Position Held : Safety Officer
Company : Technip USA(Kuwait)
Client : EQUATE Petrochemical Company, Kuwait.
Project : Ethylene Cracking Furnace Project.
Tenure : From May 2006-Mar.2007.
Reporting to Construction Manager, coordinating with Equate safety Manager to implement all requirements of Equate Safety Manual and Technip Safety policy. As a team leader Surveillance and monitoring of sub contractors safety activities and on going Project jobs.
Provide site based HSE support to construction team. Promote compliance across the project with
requirements in environmental, waste management, health and hygiene standards and objectives.
Conduct site audits and inspections to ensure compliance. Maintain records and produce reports and
statistics of all safety related incidents. Accident investigation. And responsible for a designated area
for safe work environment.

4. Position Held : Safety Coordinator.
Company : Kharafi National Kuwait
Client : EQUATE Petrochemical Company, Kuwait.
Project : Ethylene Plant (Shutdown)
Tenure : From.Feb.2006-April.2006
Worked as Safety co-coordinator with Kharafi National co.(Kuwait). for EQUATE Major
Turnaround Shut down. Monitoring all site activities, unsafe condition and
Unsafe practice and reporting to Equate HSE Engineer
5. Position Held : Safety Supervisor
Company : Voltage Engineering. Ltd. (Doha, Qatar).
Client : Qatar Petroleum.
Project : Power Turbine project
Tenure : From.Oct.2003-Oct.2005
Represent safety department of the company at clients meeting ,Site inspection, observation and reporting. Advising, planning and organizing measures to prevent hazards .Conducting Job Safety Analysis , Preparation of Risk Assessments and Safe Job Plans Development of company’s Health Safety and Environment Procedures Ensure availability of PPE. Development of HSE training plan and conducting training, Monitoring and reporting on the health, safety and environmental aspects of the project, Accident investigation ,Maintain record and produce reports and statistics of all safety related incidents.Determine and Identify the cause of any accident or dangerous occurrence and recommend means/measures to prevent recurrence.
6. Position Held : Safety Supervisor
Company : Cooper heat Inspecion.co.(Kuwait).
Client : Kuwait National Petroleum co..
Project : Refinery
Tenure : From.Mar.2000-Mar.2003
Worked as a safety Officer for Kuwait National Petroleum Company, Inspection Maintenance
supply contract. As a team leader Surveillance and monitoring all activities and observe to control
all unsafe practice.
Jan1987-Jan2000 : Worked in Indian Army
Permanent Address : V.K. Edom,
Akathethara – (PO)
Palakkad - Dist,
Kerala, India.-678 008
Passport Number : G 2825101
Nature of Duties & Responsibilities been handled :
- Implementation of the safety policy and program.
- Conducts seminars, orientation for newly hired employees, researchers and studies for the improvement of safety in the yard.
- Provides for continuing education of employees by dissemination safety publications, rules, posters, etc.,
- Recommends disciplinary action to safety violators who unnecessarily expose him or her or other personal injury or property damage.
- Prepares and submits inspection reports, investigates and studies causes and recommends corrective measures to decrease their frequency and prevents recurrence.
- Coordinates with medical sections to determine monthly accident statistics, and makes comparative reports of it.
- Monitors radiographic test by checking the area if it is already safe and keep unauthorized personal away from the hazardous exposure.
- Meets with representative or clients and other contractors to discuss requirements regarding accident prevention in the job site.
- Conducts safety inspection around the area of responsibility to see to it that all working condition is free from hazardous.
- Initiates and institutes the schedule of job site inspection, observation thoroughly equipment flow, maintenance, material handling and personal hygiene.
- Implements proper execution plan for safety in the fabrication and construction working areas such as traffic planning, re-routing and implementation of the same.
- Tests working areas for toxic fumes, explosives gas air mixture, combustible materials and equipment around the area.
- Prepares reviews and maintain records and statistical data which are required by the safety chief engineer, the client and the department of Labour and employment from time to time.
- Attends job progress meeting to keep update on the current and future plans for the project and to advice project management on problems concerning accident prevention.
- Conducts health and safety risk assessments, toolbox talk, in house safety awareness sessions and emergency exercises.
- Educate the workers on safety instructions, fire fighting, personal protection equipments, work permit system, house keeping, first aid and emergency signs, handling of hazardous chemicals and dangerous materials, how to act on emergencies, and safe handling of pneumatic equipments, compressors, electrical operated tools, radiography cameras, abrasives and plastic operations, welding and cutting, handling and storage of pressure cylinders etc.,

[Guest]

RESUME
Post : ELECTRICAL DESIGNER/ CAD OPERATOR
Name : KAILAS M. HADKAR
E-mail : hadkarkailas AT yahoo.com
Birth date : 25th September 1959
Marital Status : Married
Educational Qualification : (a) Passed S.S.S. Examination in 1976.
(b) Passed AutoCAD operating course in Rel. 10, 11, 12 & 14
(c) Completed Micro station (Drafting) Course
(d) Passed I.T.E.I. Piping Draftsman Course
(e) Passed Mechanical Drafting Course
(f) Knowledge of AutoCAD 2000 & 2004 and 2007
(g) Passed Government P.W.D. Licensed Wiremen Course
(h) Knowledge for PDS EE raceway System

Experience : Local : 24 years (Approx.)
Overseas : 5.3 Years
General Electric
Single line Diagram, Lighting, Power, Earthing & Lighting Protection Layout, Building Conduiting Layout, Cable tray and Cable Routing layout, Equipment and foundation layout, Control Schematic and Wiring for High rise Building, Power Plant, Petroluiem plant, Refinery, Transformer Room, Switchgear Room
Mechanical
Mechanical Drawing , Machine Parts Drawing, Electrical Panel Layout
General
Knowledge of HVAC, Piping, Fire Alarm Services, Communication and Building services Layout for Coordinate purpose.
Work Experience
2012 Onwards
Working with M/s. TOYO Engineering Ltd. EPC co. as a Electrical Designer / Cad operator (Electrical Design Dept.)
2007-2012
M/s. Tecnimont ICB Malad EPC co. as a Electrical Designer / Cad operator (Electrical Design Dept.)
2007
M/s. Blue Star Design and Engineering Ltd. Mumbai. (Electrical Design Dept.)
2006-2007
M/s. Balawant Mehtalia Consultant Pvt. Ltd Mumbai. (Electrical Design Dept.)
1998-2005
M/s. Bhagawati Design Pvt. Ltd. Mumbai. Deputed to
M/s. LD Astorino Branch eng. USA (Electrical Design Dept.)
1993-1998
M/s. Unik Engineering Services, Mumbai. (Electrical Design Consultancy)
1991-1993
M/s. Emirates Trading Co. Dubai (Electrical Design Dept.)
1987-1989
M/s. Saudi Specialist Co. Saudi Arabia (Electrical Design Dept.)
1985-1986
M/s. Shanfari Trading Co. Muscat. (Electrical Design Dept.)
1979-1985
M/s. Yashmun Engineering Co. Mumbai subsidiaries for TATA Electric Cos. (Electrical Design Dept.)
1977-1978
M/s. Mechaids Corporation Mumbai. . (Electrical Design Dept.)

[Unregistered]

Dear sir,
I am Rashmi Sinha from chemical engg.(B.Tech. 3rd yr.), wants to do summer training in your organistion during the month of june-aug. kindly provide me the details for the same.

Rashmi Sinha
pursuing B.tech from
(Bharat Institute of Technology, Meerut)