Tech-Vidhya Certified RF I&C Engineer Jaipur

[tech-vidhya]

Tech-Vidhya Certified RF I&C Engineer

Course Objective :
The course aims to aware candidates about BTS & MW site installation, commissioning, integration & testing and provide them with an in depth knowledge of complete cell site and GSM & MW Technology.
Course Overview :
This training program is designed to give comprehensive overview of Communication system, GSM system & CDMA system to the candidates. In the later phase, training will be based on practical lines for telecommunication which constitutes giving the brief ideas of telecom terminologies and equipments used at cell site. After the completion of training, candidates will familiarize with various RF Segment such as RF survey, Civil work, Installation and Commissioning, AT, Quality Audit, Health and safety precaution etc. Training program also includes enhancing management capabilities of our candidates by putting them in group discussions, this will help our trainees to go for managerial positions in the Telecom sector.The course ends with the 15 days practical in lab and 15 days practical "on site" so that candidates will get live on-site working experience.
Course Contents :

Module-A : Introduction to communication
History of communication, What is GSM, Evolution of GSM, Fundamentals of GSM, GSM Architecture, Understanding GSM channels, Call flow in GSM system, Radio interface, advantages of GSM, GSM traffic management, GSM transmission, GSM 900/1800/1900, What is CDMA, Evolution of CDMA, spread spectrum techniques, CDMA system architecture.

Module-B : About the Cell Site & Outdoor Equipments
What is cell site, Introduction & classification of cell site, Telecom Towers, Diesel Generator, Shelters, AMF panel, Earthing Pits, Lightning Arrestors, Aviation Lamps, Pole Mounts, Outdoor Cable Trays (HCT & VCT), GSM Antenna & Accessories (Tilt Arrangement, Antenna Clamps etc.), RF cables & Accessories (RF cables, Jumper cables, RF connectors, RF Clamp, RF Earthing Kits, Whether proofing Kits, TMB, TMA & Surge Arrestors etc.)

Module-C : About the Indoor Equipments
Introduction-classification-Working Principle-Manufacturer of Roxtec, Cable tray (indoor-HCT),Servo-stabilizer, Power Interface Unit, Power Plant, Air-conditioner, Battery Bank, Alarm panel, ACDB, DCDB, DDF, IGB, Transmission Rack etc.

Module-D : Introduction to MW Communication system
Introduction to Microwave, MW Frequencies Band, Propagation Used, LOS Principle, Fundamental of LOS survey, Why we used MW communication system in GSM Network, Basic Design of MW Antenna, Different Parts used in MW Antenna, Block Diagram of MW communication System, E1’s Fundamental, E1 Capacity of MW communication system, Different Types of MW communication system, Data required to install & Align MW Antenna, Installation Process, Alignment Process, Terminology used in MW communication system etc.

Module-E : Introduction to Fundamental BTS
Introduction to BTS, Fundamental Block diagram of BTS, Different cards/module of BTS, Functionality of each cards/module in BTS, Fundamentals of Diversity Technique, Sectorization in BTS, Career configuration in BTS, Alarms of BTS, Terminology used in BTS etc.

Module-F : Tools & Test Equipments Used for BTS/MW I&C
Introduction-Specification & Use of Tools (Spanners, Screw Drivers, Hammers, Cutters, Crimping Tools, Knife, Hack Saws, Drill Machine, Soldering iron, Tilt Meter, Compass, RF Cutter, Sprit Level, Allen Key, Rope, Pulley etc.), Test Equipments (Laptop, Power Meter, VSWR Meter, Site Analyzer, BER Meter etc.) Health & Safety Tools (Helmet, Safety Belt, Gloves, Boot, First Aid Box etc.)

Module-G : I &C of BTS and Associated Equipments
RF Survey, Finalization of tool kit according to work, List of materials used at sites, Unpacking of materials, Initial reporting from site, Installation process, Finalization of Installation, VSWR measurement of RF cable, Commissioning of MW, Alignment of MW, BTS commissioning, Integration of cell site, Alarm Testing, Call Testing, Call Handover Testing, Preparation of Site Documents, Punch points check list etc.
By the end of this course candidates will be able to :

* Talk about cell sites and GSM & MW Technologies.
* Handle equipments used at cell site.
* Understand functionality of BTS as well as MW.
* Understand functionality of Battery Bank & Power Plant etc used at sites.
* Install-commission and align MW link by himself.
* Install, commission and Integrate BTS Sites.
* Check site Installation as well as commissioning quality.
* Manage installation as well as commissioning team and make documents for the sites.

Address :

Tech-Vidhya
(A unit of Aayan Infratel Pvt. Ltd.)
Plot No. 97-98, 2nd Floor, NMC Complex,
Ram Nagar Shopping Center, Shastri Nagar,
JAipur-302016,
Ph. 0141-2301313
Email : career@aayaninfratel.com
freshers@aayaninfratel.com

http://tech-vidhya.com

[tech-vidhya]

Job Description

Engineering Candidates have to under-go 2 months training before getting the job. This training is essential requirement from the telecom companies. Which will gives the candidates the certification of RF I & C Engineer.
The modules of the training is given below :

Module-A : Introduction to communication

Module-B : About the Cell Site & Outdoor Equipments

Module-C : About the Indoor Equipments

Module-D : Introduction to MW Communication system

Module-E : Introduction to Fundamental BTS

Module-F : Tools & Test Equipments Used for BTS / MW I & C

Module-G : I & C of BTS and Associates Equipments

Entry Eligibility :

B.Tech / B.E. / Diploma in E & C , Electronics , IT , Computers , Electrical etc.

( Final year engineering students can also be apply for training )

Advantages :-

1. 100% Placement assistance in Telecom Companies with above profile.

2. Less Theoritical more practical / on site training , to know actual working procedure / conditions

3. inhouse and On-site Practical Training.

4. Training on Telecom Management Techniques

Candidate can Apply on :
career@aayaninfratel.com

Visit: http://tech-vidhya.com

Call on: 0141-2301313
09785705947

Address: Tech-Vidhya
(A unit of Aayan Infratel Pvt. Ltd.)
Plot No. 97-98, 2nd Floor, NMC Complex
Ram Nagar Shopping Center,
Shastri Nagar, Jaipur-302016
Rajasthan

[tech-vidhya]

BCA/MCA/Engineering/Diploma Candidates will have to under-go "Live IT Projects Training" on self support basis before getting the job.

Importance of Training:-
1:- Today Company requires readily trained, Job ready and have undergone Live Project Training professional.
2:- Today knowing the basic Technologies is not just enough.
It is true that there is huge storage of IT professionals but a big shortage of Job ready professionals.

To become software designer and developer candodates should have good pratical knowledge as well as candidates should be aware of the working enviroment, this will happen only if the candidates will under-go Live IT project training (on DotNet, Asp.Net, Ado.Net, VB.Net, XML, HTML, CSS, Java, AJAX, Java Scripts, Flash, Photoshop, MS-SQL, MY-SQL etc) only.

Training Procedure:-
1:- Customization options

* modifying existing courses
* blending delivery methods
* custom designing courseware

2:-Flexible approach
3:- Wide range of offering
4:- Quality instructors
5:- Comprehensive course/study material

Advantages :-

1. 100% Placement assistance in IT Companies with above profile.

2. Less Theoritical more practical/Live IT Project Training, to know actual working procedure/conditions.

Candidate can Apply on :
jobsATaayaninfratel.com

Visit: http://tech-vidhya.com

Call on: 0141-2301313
08003153714

Address: Tech-Vidhya
(A unit of Aayan Infratel Pvt. Ltd.)
Plot No. 97-98, 2nd Floor, NMC Complex
Ram Nagar Shopping Center,
Shastri Nagar, Jaipur-302016
Rajasthan

[Guest]

dear sir,
we have done B.C.A(Computer application ) & we want to be in telecom site. becouse we ar'nt be B.E. holder so please suggestion us.
becouse we want to learn BTS TECHNOLOGY AND TELECOM LINE and we want to get job in telecom . we like most telecommunication...................
we are from jabalpur(M.P.).

PLASE CALL US This No.
+91 9752862676
mail id-----kumarsanu88@gmail.com.

we want to do Tech-Vidhya Certified RF I&C Engineer Jaipur
and BTS course. please tell us fees structure of your course's and solve our problems.
please we r waiting......................

Regard's- Manoj kumar patel
-Ankit keserwani
-Sanjay mishra
------------------------
-------------------------------------------------------------------------------------

[irituraj]

what is the training period for telecom training