Tech-Vidhya Jaipur : Telecom Engineer, RF Engineer, BTS Engineer, Site Engineer, O&M Engineer, BSS Engineer, Survey Engineer

[tech-vidhya]

Desired Candidate Profile:

Candidate should be;
BE/B.Tech/Diploma In ECE,EEE,CS,IT Fresher only
Relocate to jaipur
Smart, Hard working
wiling to travels across India

Job Description :
We are looking for candidates who will be willing to work as BTS/BSC/MSC Installation and commissioning , RF Survey/RF Planning. Service Engineer, Drive Test Engineer, Switch Engineer.
Candidates have to under-go 2 months training before getting the job. This training is essential requirement from the telecom companies which will gives the candidates the certification of RF Engineer.

The modules of the training is given below :

Module-A : Introduction to communication
Module-B : About the Cell Site & Outdoor Equipments
Module-C : About the Indoor Equipments
Module-D : Introduction to MW Communication system
Module-E : Introduction to Fundamental BTS
Module-F : Tools & Test Equipments Used for BTS/MW I&C
Module-G : I &C of BTS and Associated Equipments

By the end of this course candidates will be able to :


* Talk about cell sites and GSM & MW Technologies.
* Handle equipments used at cell site.
* Understand functionality of BTS as well as MW.
* Understand functionality of Battery Bank & Power Plant etc used at sites.
* Install-commission and align MW link by himself.
* Install, commission and Integrate BTS Sites.
* Check site Installation as well as commissioning quality.
* Manage installation as well as commissioning team and make documents for the sites.

Advantages :-
1. 100% Job Guarantee in Telecom Companies with above profile.
2. Complete Telecom Training for the students with the knowledge of Civil,Electrical and survey work.
3. In-house and On-site Practical Training.
4. Training on Telecom Management Techniques

Experience : 0 - 1 Years
Location : Jaipur
Compensation :
Rupees 60,000 - 2,25,000
(DA@Rs100-300/day, TA, Mobile Allowance) subjected to site work

Address :

Tech-Vidhya
(A unit of Aayan Infratel Pvt. Ltd.)
Plot No. 97-98, 2nd Floor, NMC Complex,
Ram Nagar Shopping Center, Shastri Nagar,
JAipur-302016,
Ph. 0141-2301313
Email: career@aayaninfratel.com
freshers@aayaninfratel.com

[Guest]

Sir,
20+5 yrs experience in Inian Air Force & Reliance Communication as Operational Support Engineer.

[R.Harikrishnanrajen]

RESUME

R. HARIKRISHNAN,
EMAIL : harik044 AT gmail.com

Degree : B.E. Electrical & Electronics Engineering
College : Fomra institute of technology
University : Anna University, Chennai
Career Objective : Enjoy every moment by cracking realistic troubles of an organization in optimistic way with heaps of confident.

AREAS OF EXPERTISE :
- Communication Engineering
- Power Electronics

ACADEMIC QUALIFICATIONS :

COURSE INSTITUTION EXAMINATION AUTHORITY YEAR OF PASSING % OF MARKS
B.E. Fomra institute of technology Anna University 2010 64
HSC St.Peter’s Higher Secondary School State Board 2006 72
SSLC S.R.D.K Vivekananda Vidyalaya School Central Board Secondary Education 2004 59

PROJECT DETAILS :

Period : 6 months

Company : Ennore Thermal Power Station

Project Guide : Mr. BALAMURUGAN
Title : COMPUTER BASED FURNACE SAFEGUARD AND SUPERVISIORY SYSTEM
Description : In power plants various interlocks and protections are used for safeguarding boiler, turbine, generator etc. Hard-wired logic gates are used in the most of the existing power plants. The aim of our project is to convert the existing hardware based relay circuits and protection in to a computer controlled one, by means of which delay in tripping due to logic gate component failure and other reasons may be avoided. By introducing the computer based protection the chances of failure faulty tripping may be avoided. Also fault tracing is made easy by the soft-based logics as it uses the concept of ‘0’ or ‘1’.

COMPUTER PROFICIENCY :

Operating System : Windows XP, Windows Vista, Windows 7

Software : C, C++, HTML.
Analysis Software : MATLAB

LANGUAGES KNOWN :

TO SPEAK English, Tamizh
TO READ English, Tamizh
TO WRITE English, Tamizh
MOTHER TONGUE Tamizh

HOBBIES :

- Cricket
- Shuttle badminton

SPECIAL INTEREST :
- Social Service

DECLARATION
I do hereby declare that the particulars of information and facts stated herein above are true, correct and complete to the best of my knowledge and belief.

Place : Chennai
Date : HARIKRISHNAN. R

[vasundhrava]

RESUME
Vasundhra Agrawal
Electronics &
Communication Engineering
E-mail :vasundhrava AT gmail.com.
vasundhraagrawal22 AT in.com .

Career Objective :
- To use my knowledge & skill effectively for timely execution of the projects in hand and making all efforts to make my team & organization excel.
Working Experience :
- Worked with M/S Gabriel India Ltd Gurgaon (Anand Group) for 1 yr. as a cell coordinator of rod cell in production department from Aug 2007 to Aug 2008.
Gabriel India Ltd. Gurgaon, one of the largest shock absorbers manufacturing company in India having an ISO-9001 and ISO : TS-16949 certified.
Technical Qualification :
- Bachelor of Technology (B.Tech.) in Electronics & Communication Engineering with 64.0% in 2011 from Gautam Budh Technical University, Lucknow.
- Three years Engineering Diploma in Electronics Engineering with 77.87% (with hons.) in 2007 from Uttrakhand Board of Technical Education, Roorkee.
*Percentage mentioned in B.Tech. upto 7th semester.
Academic Qualification :
- 10th class with 73.45% in 2004 from CBSE Board.
Key Academic Projects :
- RF Based Cellphone Detector & Display
Cellphone detector & display is used to detect the mobile phone which is under use in a no cell phone zone. The loop antenna catches the RF signals and pass to the opamp IC using filter and then the amplified output is fed to the timer and display the detected cell phone in use, using 8-bit microcontroller 89S51 which uses flash memory.
- Home Security System
This project includes the security alarms such as burglar alarm, fire alarm, indicator indicating melting of fuse, magic eye, automatic street light, shadow alarm and touch bell to secure any area from the unwanted effects.
Industrial Training :
- Birla Power Solutions (June 2010 to July 2010)
Company Profile : One of the leading manufacturers of generators, gensets, UPS, inverters, pump sets, and sprayers in India.
Project Title : Working and installation of invertors.
- Bharat Sanchar Nigam Limited (June 2005 to July 2005)
Company Profile : India’s largest cellular service provider.
Project Title : Introduction to the working of telecommunication systems.
Professional Training :
- COPQ Training (An Anand Group Programme).
- Training of 7 QC Tools.
- Training of 5S.
- Product & Process knowledge.
- Knowledge of modern productional skills like POKA YOKE, TPM, SPC
Computer skills :

- MS word, MS Excel, MS Paint, Power Point.
Hobbies :
- Watching Movies.
- Listening Music.
Extra Curricular Activities :
- A, B, C certificates of National Service Scheme (NSS).
- Certificate of D.T.S.E. (District Talent Search Examination).
- Fee relaxation in Futoronix Automation Pvt. Ltd. By qualifying scholarship test.

[Guest]

Dear Sir,
I have done B. Tech in ECE and currently working i HCL Infosystem Ltd.I am looking for this type of opening in telecom company.I have attached my resume with this mail.Please find the attachment. If my profile will fulfill the requirement for this position then give me an opportunity to prove myself. I will be grateful to you for this.
Thanking You,
With Regards,
Sandip Kumar Ojha

[Guest]

RAJINDER KAUR
E-MAIL :rksinsan.kaur AT gmail.com

CAREER OBJECTIVE :
Seeking a challenging environment that encourages continuous learning and creativity that provides exposure to new ideas and stimulates personal and professional growth & I can exhibit my creativity, resourcefulness, and inter-personnel skills to the maximum
“NOTHING WILL COME TO YOU IF YOU DO NOT GO FOR IT! JUST TAKE A STEP AHEAD TO ACHIEVE YOUR GOALS”
QUALITIES :-
- Interested working in team
- Highly flexible and adaptable performer
- Creative problem- solver who works hard and love challenges
EDUCATIONAL PROFILE :
I HAVE GOOD ANALATYCAL, LOGICAL AND QUANTITATIVE PROBLEM SOLVING SKILLS, GOOD COMMUNICATON AS WELL AS GOOD TECHNICAL KNOWLEDGE.
B.Tech in “Electronics and Communication Engineering” from Punjabi university, Patiala with 73.5%
Diploma in ece from PTU University with 76.28%
COMPUTER APPLICATIONS :-
Familiar with Microsoft and other basics of computers.

Hobbies :
- Surfing the Net
- Listening music
Practical training :
- 6th month training of 8th sem in Elin Appliances (co-maker of Philips), Baddi (Himachal Pradesh).
- 2 months training at Kansal computer centre, Raman (Bathinda) of computer Networking.
- 2 weeks training at BSNL (Bharat sanchar nigam limited) Raman, Bathinda.
- 1 month training at PSEB (Punjab state Electricity board) Raman, Bathinda
- 1 month training at computer centre, Raman (Bathinda) of computer Hardware.


Area of interest :
- Electronics devices and circuits (EDC)
- Digital electronics
- Microwave and Radar engineering
- Wireless communication
- Computer networking

[Guest]

CURRICULUM VITAE

PRASHANT B. DEVMURARI
E-mail prashant_devmurari AT yahoo.com

Career Objective :
To perform to the best of my skills and help the organization in which I am working to achieve its objective. Work with highest priority and redefine best quality
Professional Qualification :

B.Tech in ELECTRONICS & COMMUNICATION ENGINEERING from Ajmer Institute of Technology, Ajmer of Batch 2011 (Aggregate percentage up to 7th sem is 63.46%)
Qualification Year Institution/School Board/University Percentage
7th Semester 2011 Ajmer Institute Of Technology, Ajmer Rajasthan Technical University 62.30%
6th Semester 2011 Ajmer Institute Of Technology, Ajmer Rajasthan Technical University 64.70%
5th Semester 2010 Ajmer Institute Of Technology, Ajmer Rajasthan Technical University 64.5%
4th Semester 2010 Ajmer Institute Of Technology, Ajmer Rajasthan Technical University 63.8%
3rd Semester 2009 Ajmer Institute Of Technology, Ajmer Rajasthan Technical University 62.%
Diploma in EC 2008 N.M.Gopani Polytechnic Institute,Ranpur,
Ahmedabad Technical Education board Gujarat 67.45%
Academic Qualification :


Qualification Year Institution/School Board/University Percentage

10th 2005 Navyug Vidhyalay Porbandar Gujarat GBSE 68.86%
Technical Background :
Operating Systems : Windows 98/XP
Software : C language
Course : CCNA
Project Experience :
Project Name : 1. GSM BASE E NOTICE BOARD
2. WIRELESS PC TO PC COMMUNICATION THROUGH IR


Seminar :
Title : SURFACE MOUNT TECHNOLOGY
Summer Training :
- BSNL ,Porbandar
- Embeded system & robotics from HP at AIT, Ajmer
Area of Interest :
1. Project /Site Management
2. Industries
3. Teaching

[Guest]

e-mail : chandra011 AT live.in
CURRICULUM VITAE
CHANDRASHEKHAR PANDEY
Objective :
To always strive for gaining knowledge and skills and apply to the best of my ability . To climb the organization ladder through hard work , sincerity and full honesty and thus to lead a successful organization .
Working experience :

1. Worked as a BTS engineer (Testing, Commissioning, and Integration of BTS/Microwave Links) at Rawelcom Engineering Pvt. Ltd. For six months.
Professional skill set :
- Programming Languages : C, C++, assembly language,

Educational qualifications :
EXAMINATION BOARD\UNIVERSITY YEAR AGGREGATE
B.TECH (E.C.E.) PUNJAB TECHNICAL UNIVERSITY JALADHAR 2007-2011 71%
12th UP.I.E.C LUCKNOW 2006 69%
10th B.S.E.B PATNA 2003 61%

Industrial training :
1.One month computer and workshop training at my college.
2. Two months industrial training at CMC Ltd. Noida in Embedded Systems.
3.Six months training at RITT(Rawelcom Institute Of Telecom Training) in Telecommunication.
Projects :

1.Project Name : Electronic voting machine Using 8051.
Duration : 2 months
Team Size : 1
Environment : C, Assembly Language.
Description : Electronic voting machine is used to vote in several political election.

Extra curricular activities :
o Member of N.S.S team of college .
o Several times awarded in the blood donation camp.

[Guest]

Jaikee mangal
Email : jaikeemangal AT gmail.com
________________________________________
Career Objective
To be associated with an organization, which provides me a challenging position so that I can effectively contribute to its progress through my skills and knowledge with great discipline.
Academic Qualifications
STANDARD YEAR OF COMPLETION BOARD / UNIVERSITY PERCENTAGE
B Tech 2011 RTU, Kota 63
Senior Secondary 2007 RBSE 61.23
Secondary 2005 RBSE 74
Internships/Training
- Organization : dholpur combined cycle power project, dholpur (College Intern May - Jun, 2010)
Power generation using natural gas
1st plant of India on gas based and complete traning in c&I dept.
Programming Skills

Programming Language : C
Environment : Window xp
Workshop
Participated in project exhibition on recent trends in Engineering & tech. (rtet 2011) :
Organized under ISF (IETE) student forum
Projects
1. speed control of D.C. motor using remote control ( forward and backward)
Duration Final year (Major Project) Group Size 4
Description Very useful in electric cars to avide accident by controling speed
Tools/Technology 4017 ic,555 timer ic, sensor
My Role Designing of circuit.
2. automatic electricity generator
Duration Final year(minor) Group Size 4
Description A device used to generate electricity by roling breaker
Tools/Technology Transistors(pnp&npn) ,resistors ,ldr
My Role Hardware designing
Extra-curricular Activities
- Event Chief-Coordinator of National Level Techno-Management fest MANTHAN 10
- Certified Diploma in office automation
Achievements
- Awarded by “AGARWAL ORGANITATION”
- Awarded by scout and guide at school level

[Guest]

CURRICULUM VITAE
Bhargav Chemuturi
Email ID : bhargav.chemuturi AT gmail.com

Career objective :
To seek a position in an organization, where I can put in my best efforts and skills for continuous learning and exposure to new ideas, which simulates my professional growth and the development of the organization.
Educational Qualifications :
Degree Organizing Authority Grade/Percentage
(Absolute scale) Year Of Passing
M.Tech Koneru Lakshmaiah University (KLU) 7.49 2011
B-Tech Akula Sreeramulu College of Engineering,
(JNTU Kakinada) 61.5 2009
Intermediate Education XI & XII Board Of Intermediate Education,
Andhra Pradesh 76.2 2005
X Board Board Of Secondary Education,
Andhra Pradesh 78 2003

Skills
- Programming Languages : C language, UNIX operating systems
- Areas of Interest : (a)Computer networks
(b) Wireless Communications
M.Tech Project Summary :
- Title : Development of Programmable Demodulator Using ARM Processor
- Duration : July 7th2010 to April 5th 2011
- Team Size :1
- Organization : National Remote Sensing Center(NRSC),Dept.of Space, ISRO,Hyderabad,
- Project Supervisor : Mrs. Radha Nayani, Engineer SF , RC&BSD /SDRS,NRSC
- Technologies/Tools Used/Environment Worked : Keil software, Windows OS
- Description : The main theme of the project is to demodulate the incoming modulated signal from the satellite S-Band. The demodulation of the signal is 90 degrees phase shifted with the help of Hilbert transform. The demodulated signal is obtained by dumping the programming code into the ARM evaluation boards and the resultant values are set in LUT(look up table) and are used as stand alone purpose for TCP/IP protocols and remote areas.
- Responsibilities : (a)Coding for each and every block of ARM is written.
(b) Interfacing of LCD and keypad is done.
M.Tech Term Paper Summary :
- Title : Tumor clustering using Non negative matrix Factorization with gene selection.
- Duration : Dec 9th 2009 to May2nd 2010
- Team size : 3
- Role : Team leader
- Project Supervisor : Mr. D.S.Ramkiran, Asso Professor, Dept. of electronics and communication, K L University.
- Technologies/Tools Used : Micro array and NMF technologies, Clustering Algorithms.
- Description : Tumor clustering is becoming a powerful method in cancer class discovery. Nonnegative matrix factorization (NMF)has shown advantages over other conventional clustering techniques.To this end, in this paper, gene selection and explicitly enforcing sparseness are introduced into the factorization process. The NMF and its extensions, sparse NMF and NMF with sparseness constraint, are then used for tumor clustering on the selected genes. Finally the experiments on three representative gene expression datasets
(1)Leukemia Dataset (2) Central Nervous System Tumors (3) Medulloblastoma
demonstrated that the proposed scheme can achieve better clustering results
- Responsibilities : Accuracy of every dataset is found through execution.
B.Tech Project Summary :
- Title : : RFID based office attendance logger
- Duration: Nov 2008 to April 2009
- Team Size: 4
- Role: Team Member
- Project supervisor: Mr. P.Gopala reddy,Head of the Dept, Dept. of electronics and communication engineering, Akula Sreeramulu College of Engineering.
- Description: The main purpose of this project is to transmit the identity of an object in the form of a unique serial number using radio waves wirelessly. This data can be uploaded into pc by serial communication (max232).Now memory device can be free for recording the new attendance log.
Tags contain a unique identification number called an Electronic Product Code
(EPC), and potentially additional information of interest to manufacturers, healthcare organizations, military organizations, or others that need to track the physical location of goods or equipment. All information stored on RFID tags, can be scanned wirelessly by a reader at high speed and from a distance of several meters
Trainings/Seminars Attented:
- Training name: Xilinx conference summit 2011
- Duration: March 5th 2011
- Attended Location:The Park Hotel,Somajiguda,hyd
- Training name: 2nd International Conference on RF&signal processing system
- Duration:7th_9th jan 2010
- Attended Location: Koneru Lakshmaiah University
Awards/Records/Achievements:
- Project paper published in International Journal
“Develeopment of Programmable Demodulator Using ARM Processor” in INTERNATIONAL JOURNAL OF ADVANCED ENGINEERING SCIENCES AND TECHNOLOGIES (IJAEST) Vol No. 4, Issue No. 2, 018 – 022.
- Participated in paper presentation in Geethams University on 'face morphing' topic.

[Guest]

Name of candidate
Oba Joseph Lucky
Assigned Role
CADD/Construction Engineer
Years of Experience in Oil and Gas
5
Years of Experience in Architecture /Civil/
Structural Engineering
6
Statement of Fluency in English
Very good
5 YEARS EXPERIENCE RECORD
Project Name
Project Client
Country where
Performed
Role of Individual
EOC-Revamping Project Phase 2
Nigeria Agip Oil Company
Nigeria
Designing/Construction Engineer
QIT - Gas Flare Elimination Project
Exxon-Mobil
Nigeria
CADD/Construction Engineer
Onshore Asset Gas Management Project
Chevron
Nigeria
CADD/Construction Engineer
RESUME OF OBA JOSEPH LUCKY
Educational Qualification
First School Leaving Certificate – July 1993
West African School Certificate (WASC-1)-July 2006
National Diploma (ND) in Architecture – July 2008
Year of Experience
5
Primary Role :
These include but not limited to
Feasibility Studies and Inspection prior to mobilization to site
Designing and Preparation of detailed Architectural/ Civil / Structural drawings.
Preparation of presentation modeling.
Preparation of bill of engineering measurement and estimations.
Analysis of project drawings and development of job execution and installation Procedures
Development of As-Built Documentation for records and submission to clients.
Structural Engineering Design and calculations
Direct site construction supervision
Compilation of daily production report (DPR)
Attending weekly and monthly project progress meetings (presentation of report)
Guiding and providing information for project plan and schedules
Leading the site safety steering team
Checking and approving site safety documentations.
Surveying (feasibility, Engineering and construction)

SUMMARY OF WORKING EXPERIENCE
These include but not limited to :
Feasibility studies and site inspection prior to site mobilization.
Designing, Detailing and drafting of project drawings.
Study and Analysis of project drawings to establish actual scope of works and modification where necessary.
Development of job execution and installation procedures.
Development of As – Built documentation.
Design and supervision of installation works
Drawing up programmers of works for field operations
Supervising and administering site engineers and surveyors
Supervising procurement of Sand, Cement and Steel materials for site use
Development of job safety programs
Preparation of Bill of Quantities (BOQ) for As- Built works and Measurement of work for payment of Sub-constrictors.
Tender preparation
Analysis and design for validation of structural calculations
Design and construction of Bridges, Roads, Earthworks, Box Culverts, Asphalt pavements. Etc.
Structural installation, overhead crane installation and Estate Development.
Land surveying, pipe supports and racks, drains, Landscaping project, etc.

Company period
1. Proworks Nigeria Limited 2007
2.Sudelettra Nigeria Limited 2008 - till date
COMPUTER PROFICIENCY
auto CAD, archi CAD, Atlantis, Revit, Staad pro, PDMS & Microsoft office.
SAFETY CERTIFICATIONS
Incident and Injury Free (IIF) – Chevron
Construction Safety Training (Operational Excellence)
HOBBIES

Researching, adventuring.

[Guest]

ADITYA DHAKA

E-MAIL : adityadhaka89 AT gmail.com .

Objective :
Acquiring a challenging designation in the organization to enhance my skills and serve the organization with my best working efficiency and utilize my skills.
Education :
Year Degree/Certificate Institute/School, City Aggregate
2011 B.Tech
(Electronics & communication) ARYA INSTITUTE OF ENGG. & TECHNOLOGY,JAIPUR 71.21%
(HONRS.)
2006 CBSE- Class 12th K.V.NO.2, JAIPUR 73.20%
2004 CBSE- Class 10th K.V.NO.2, JAIPUR 80.80%
Computer skills :
- Language known : C/C++.

Summer Training & Projects :

- I did my summer training of duration 38 days at INDIAN RAILWAYS JAIPUR in MICROWAVE AND OPTICAL FIBRE COMMUNICATION.
- Major project on “wireless biomedical monitoring”
Description-In my project, a generic real-time wireless communication system was designed and developed for short and long term remote patient-monitoring applying wireless protocol. The primary function of this system is to monitor the temperature and Heart Beat of the Patient and the Data collected by the sensors are sent to the Microcontroller. The Microcontroller transmits the data over the air.
At the receiving end a receiver is used to receive the data and it is decoded and fed to Microcontroller, which is then displayed over the LCD display. If there is a dangerous change in patient's status an alarm is also sounded.
AWARD RECEIVED :

- BEST ATTENDENCE AWARD IN COLLEGE.
- WON GOLD IN STATE LEVEL K.V.S CRICKET CHAMPIONSHIP.
- PARTICIPATED IN NATIONAL LEVEL K.V.S. CRICKET CHAMPIONSHIP.
- WON FIRST PRIZE IN ROBOTICS COMPITION IN MODI INSTITUTE OF TECHNOLOGY & SCIENCE.
Strengths :
- Good reasoning skills.
- Ability to quickly adapt to new responsibilities and environment.
- Eager to learn more and more knowledge.
- Good Team Worker.
- Dedicated person.
INTERESTS AND HOBBIES
- CRICKET.
- GYM.