WELDING QC INSPECTOR Doha Qatar : DOPET

[Admin]

QC INSPECTOR (WELDING)
Requirements
* Completion of Mechanical Engineering Degree requiring 4 or more years of full time study.
* Minimum of 3 yrs. experience or more in QAQC related work.
* BGAS Grade 2 or NACE for Painting Inspector (At least 2 years Certified) is a MUST.
* CSWIP 3.1 or 3.2 for Welding Inspector (At least 2 years Certified) is a MUST.
* Ability to prepare inspection reports as per project requirements, implementation & maintenance of Quality Management Procedures.

Job Description
* Responsible in Inspection activities related to painting.
* Ensure that effective and efficient Quality / HSE Management System is established and followed in accordance with the standards.
* Plan and carry internal audit.
* Ensure that inspection and testing comply with the specified requirements
* Carry out Quality Control Activities in accordance with the Project / Customer specification requirements.
* Reviews, surveillance, witness all activities in accordance with Inspection and Test Plant (ITP) / Customer requirements.
* Liaise on quality matters with project teams
* Maintain quality records in accordance with procedures and specified requirements

To apply, please send your updated resume in MS Word Format plus passport size photo, pertinent certifications (educational/training/previous employment) for evaluation through this Email address: engrjobs@dopet.com

DOPET was established in 1981 to cater the Oilfield Maintenance activity in the State of Qatar.

Catering to the fields like Oil, Gas, Petrochemical and Utilities Industries, both Onshore and Offshore, DOPET has now grown into one of the largest Mechanical Construction Company in Qatar.

Powered by a dedicated team of Professionals, a strong Workforce and sophisticated Machineries and Equipment, DOPET has successfully carried out diverse assignments in areas like Fabrication and Installation of Piping and Structural, Fabrication of Pressure Vessels and Tanks, Electrical, Instrumentation, Valve Overhauling, etc.

www.dopet.com

[Guest]

My name is Anil jacob and now i'm working in mumbai ,a offshore company as a quality control engineer.

[Guest]

JEYARAJ.J
E-mail id : jeyaraj.merton AT gmail.com
CAREER OBJECTIVE
Seeking a challenging position where I can effectively contribute my skills as a
leading professional towards the growth of an organization and society.
ACADEMIC QUALIFICATIONS

- S.S.L.C with 76% from st Arulanandar Hr sec school, Oriyur (2004)
- H.S.C with 61% from st Xaviers Hr Sec School, Palayamkottai (2006)
PROFESSIONAL QUALIFICATION
- studied B.E (Mechanical Engineering) with 64% at Sethu Institute of Technology, affiliated to Anna University-Chennai. (2010)
*3rd semester - 8th semester
SKILL SETS


- DESIGN SOFTWARE : Basics in ANSYS
Basics in PRO-E
- AREA OF INTEREST : welding technology
- ADDITIONAL COURSE : NDT LEVEL II (UT,PT,MT,RT)
- EXPERIENCE : I have worked as a quality inspector in ganges
International private limited for one year.
This company having project in telecom tower,
Wind mill tower, power transmission, railway
Structures and so on.
PROJECT DONE

TITLE : FINDING THE CAUSE FOR THE SCRAP AND REWORK
ON DRUM BALANCING MACHINE USING SIX SIGMA
CO-CURRICULAR ACTIVITIES - Undergone industrial visit at SRI JAYAVILAS ROADWAYS in Aruppukottai.
- Undergone an industrial visit at TVS FATENERS Pvt. Ltd in Madurai.
EXTRA CURRICULAR ACTIVITIES

- Foot ball : Silver medalist in Anna University Inter Zonal Sports meet.
Silver medalist in Tamil nadu inter engineering sports meet.

[Guest]

CARRICULAM VITAE

POSTION : QA/QC ENGINEER E-Mail: pkraneesh AT gmail.com
: QA/QC INSPECTOR
Objective
Looking for a challenging and demanding position in QA/QC Inspection with growth oriented organization to render professional skills and add value to organizational growth and objectives. I am confident that my skills and past experience would make great contribution to your organization. Therefore I would appreciate the opportunity to discuss my qualification for this position in greater detail with you in person at your earlier convenience.
Educational & Technical Qualification
2008 : Post Diploma in Oil Field Engineering & Quality Control
(From Indus can Petroleum Institute, Nilambur, Kerala)
2008 : ASNT Level II, in RT, UT, DPT, and MPT.
(From Indus can Petroleum Institute, Nilambur, Kerala, India.)
2005-2008 : Diploma in Mechanical Engineering.
(GPTC Meenangadi, Wayanadu, Kerala)
Computer Skills : Auto CAD 2007, MS Office, MS Excel, MS Word
Code Knowledge : ASME SECTIONS II, V, VIII, IX
IBR 1950
AWS D1.1
ANSI/ASME B 31.1

Career Profile : (Above Three Years Experience).
DESIGNATION : QA/QC ENGINEER (Boiler, TG & Piping)
CLIENT : M/S SHANGHAI ELECTRICAL CO. (INDIA) LTD.
EMPLOYER : M/S SUNIL HI-TECH ENGINEERS LTD.NAGPUR, INDIA.
DURATION : JUNE 25th 2008 to SEP 17th 2010
CONSTRUCTION PROJECT : Boiler Erection and Quality Control of Unit-I & III of 4x300 MW Thermal Power Project (Boiler & its auxiliaries) for Jindal South West Energy Ratnagiri Ltd (JSWERL) Ratnagiri, Maharashtra, India
DESIGNATION : QA/QC ENGINEER
CLIENT : C/O.BAJAJ INFRASTRUCTURE DEVELOPMENT LTD.
EMPLOYER : THERMAX ENGINEERING CONSTRUCTION COMPANY LTD
DURATION : OCTOBEER -2010 Till Continuing
CONSTRUCTION PROJECT : Boiler Erection and Quality Control of 2x190 TPH CFBC BOILERS for BAJAJ Infrastructure Development Utraula, Balarampur, UP, India
Job Responsibilities]
- Responsible for all Quality activities in piping and mechanical disciplines
- Studying of applicable Project Drawings, specifications.
- Carrying out the Inspection of incoming materials & other welding consumables & reviewing relevant documents and test certificates
- Review of WPS ,PQR and witnessing WQT as per ASME Sec-IX
- Coordinating with clients and Third Party Inspectors for arranging inspection activities
- Carrying out various types of Inspections as per approved QAP such as :
a) Fit-up inspections of piping and structural items.
b) Weld visual inspections as per approved drawings.
c) Witnessing / reviewing of NDT inspections.
- Preparing daily welding reports & NDT Co-ordination.
- Interpretation, Evaluation & Preparation of NDT (RT, PT, UT and MT) reports.
- Interpretation of radiography Films as per code,
- Attending RT repairs.
- Witnessing Hydro test, Pneumatic test, and PWHT & Hardness test.
- Preparation of QA/QC documents
- Ensuring that consultant’s/clients comments are implemented.
- Review of project material specification with reference to client recommended standards
- Maintaining quality control records in support of activities in area of responsibilit
Job Experience
- Inspection of materials(Ground inspection) & reviewing relevant documents and test certificates
- To make welding schedule based on the drawings & QAP.
- Review of WPS ,PQR and witnessing WQT as per ASME Sec-IX
- Inspection of structural and pressure parts alignment as per approved QAP and Drawings.
- Inspection of piping Fit-up, Welding, Erection & NDT as per standards and specification.
- Preparing daily welding reports & NDT Co-ordination.
- Interpretation, evaluation & preparation of NDT (RT, PT, UT and MT) reports
.

[Guest]

CURRICULAM VITAE

NAME : UPPULURI SESHA SRINIVASA RAO
EDUCATINAL : B.Tech(Mech, from
QULIFICATION Kakatiya University, 1984-1988)
ADDITIONAL : CSWIP 3.1(Welding Inspector);
QUALIFICATIONS CSWIP CERT No.39192
(Date of Expiry30.October.
2013),
Certified IRCA Auditor from Bureau Veritas,
(ASNT Level-II in)
RADIOGRAPHY TESTING,
MAGNETIC PARTICAL TESTING,
PENETRANT TESTING,
RADIOGRAPHY
INTERPRETATION
Under gone “ISO 9000 training course
from FTI, Bangalore.
EXPERIENCE (Construction QA/QC) :- Having more than 12 Yrs. as Q.C. inspector From LNG Plant piping to Nuclear power Plant piping, Cross Country pipelines to Petro-Chemical Plants etc.,.Well versed in code like ASME IX,API 1104,API 650, ASME V etc.,.
MAJOR CAREER SYNAPSUS : Starting from most recent
From July 2010 to Till date :- Working as Sr.Engineer (QA/QC) in Hinduston Dorr-Oliver Ltd(Subsidiary of IVRCL Infrastructure and Projects Ltd) .
From January 2008 to January2010 :- Worked as Piping/ Welding Inspector in Chiyoda Technip Joint venture- RGX6&7,AKG2 Project; Raslafan; State Qatar.
From August2007 to December 2007 : - Worked as Retainer (Consultant) in Reliance Engineering Associates Pvt. Ltd, for their cross country pipeline project. India
From March 2006 to March2007 :- Worked as Sr. Mechanical Inspector in Saudi Aramco Projects Inspection department, through Saudi Consulting Services.
( Aramco Badge #8016534);KSA
From June2005 :- Worked as Inspection Engineer in Reliance Industries Limited (Refinery-Jamnagar) through Caliber services(I) Pvt.ltd, for shutdown Project. India
From 2003 to 2004 :-
Worked as Tank (Piping) inspector for Chiyoda petrostar Limited-SMJ project,
(CPL-SMJ Project) covering Welding and NDE Activities. (Under Site Manager :-Mr.Akimoto; QC Mgr.,:-Mr.Takayama)
Activities performed in C.P.L - SMJ Project, Al-Jubail, K.S.A.
Miscellaneous Tanks inspection as per API 650,like Roundness check, Peaking and banding check for verticality, horizontal weld joints of tanks, orientation of nozzles, plumb ness of tanks, verticality of flanges, orientation of tanks as per drawings, material identification of shell plates, annular plates, bottom plates and witnessing of vacuum box testing, tanks hydro testing etc.,. for tanks like fixed roof, floating roof, rubber lined tanks of various sizes ranging form 50ft.diameter which are used to store methnal, DM water, Fire water, sulfuric acid etc.,. Checking of all related activity in Tank erection, welding inspection of Tanks including R.T. interpretation of Tanks, witness of other N.D.T requirements.
Radiographic film interpretation of under ground as well as above ground
piping. Welders monitoring work for subcontractor. U.T., P.T., M.P.I. inspection for above ground and underground piping work
P.M.I. inspection of above ground piping work. Attending construction meetings with contractor especially in tank work. Attending Q.C. weekly meetings with contractor and client. Line checking of above ground piping work. Witness of Hydro/ Pneumatic testing of above ground piping work. Co-ordination with client/ sub contractor in Q.C.related activity & Tank Works.
From 2000 to 2003 :-
Worked as QA/QC Engineer in M/s Jaihind projects Ltd, Ahmadabad (cross-country pipe line work).
Responsible for welder’s qualification as per client requirement, day-to-day QA/QC activities, QA/QC documentation, Radiography interpretation, R.A.Billing. Inspection of API 5L Gr. x60,API 5L Gr. X 42 Etc. pipelines, Like :-
Mora Utaran Gas pipeline at Surat, Client Gujarat state petro net Ltd,
Mathra- Tundla pipeline at Mathra, Client Indian Oil Corporation Ltd, 56 Kms line,
Carin Mora Gas Pipeline at Surat, client Gujarat state petro net Ltd,
Vizag Secunderabad Gas pipeline at Andhra Pradesh, client GAIL, 100Kms. line.
Form 1998 to 1999
Worked as Resident Engineer in M/s P.E.S.Engineers Pvt. Ltd, Hyderabad for their work at Kiga Nuclear power plant I and II in Karnataka, Client Nuclear power corporation of India.
Responsible for welder’s qualification as per client requirement, day-to-day QA/QC activities, QA/QC documentation, Radiography interpretation. Completed work well ahead of scheduled time.
From 1997 to 1998 :-
Worked as Senior Q.C. Inspector with C.C.C. International Co., in Sultanate of Qatar for their work of Liquefied natural gas plant.
Client Qatar Petroleum Corporation, consultant Chiyoda Corporation, Japan.
Responsible for testing of pipeline (Pneumatic / Hydro ), QA/QC documentation, line checking, day to day QA /QC activities, co-ordination with client/ consultant.
Completed the work well ahead of scheduled time.
From 1996 to 1997 :-
Worked as supervisor in M/s Sarathi Engineering Works Pvt. Ltd, Hyderabad for their works like constant spring hangers, variable spring hangers, ancillary products like pipe hangers etc., suppliers to Reliance, L& T, Kribco.
Responsible for production as well as QC.
From 1995 to 1996 :-
Worked as Graduate engineer in M/s Sibar Auto Parts Ltd, Tirupati for their works like Aluminium hard chrmo plated cylinders, suppliers to Bajaj auto Ltd, Pinasco Ltd (Italy).
Responsible for QC of day to day production.
From 1990 to1995 :
Worked as Technical Assistant in M/s Mastan Engineering works, Visakhapatanam for their works like maintenance work of pumps and NDE activities at HPCL,
Viskhapatanam.