ELECTRICAL DESIGN ENGINEER, Instrumentation Engineer : Doha Qatar, DOPET

[Admin]

DESIGN ENGINEER (ELECTRICAL)
Requirements
* Bachelor in Electrical Engineering
* Minimum 5 years experience in Detailed Engineering for Electrical in Oil, Gas or Petrochemical sector
* Must be fully conversant in the preparation of S.L.D. ; Specification & data sheet for Electrical Equipment
* Able to perform calculations for Cable sizing, voltage drop, Relay coordination, earthing plus hands on experience on software

To apply, please send your updated resume in MS Word Format plus all the pertinent certifications for evaluation and review via Email: engrjobs@dopet.com


DOPET was established in 1981 to cater the Oilfield Maintenance activity in the State of Qatar.

Catering to the fields like Oil, Gas, Petrochemical and Utilities Industries, both Onshore and Offshore, DOPET has now grown into one of the largest Mechanical Construction Company in Qatar.

Powered by a dedicated team of Professionals, a strong Workforce and sophisticated Machineries and Equipment, DOPET has successfully carried out diverse assignments in areas like Fabrication and Installation of Piping and Structural, Fabrication of Pressure Vessels and Tanks, Electrical, Instrumentation, Valve Overhauling, etc.

www.dopet.com

[Admin]

DESIGN ENGINEER (I & C)
Requirements
* At least three (3) years experience in I & C Engineering Works in EPIC or EPC environment
* Proficient in the use of MS Office Software
* Good command of English written & spoken

To apply, please send your updated resume in MS Word Format plus all the pertinent certifications for evaluation and review via Email: engrjobs@dopet.com

[pinksarkar]

Pinki Sarkar
B.Tech. In Applied Electronics & Instrumentation Engineering
Diploma in Instrumentation Technology
E-mail : - pinkisarkar_01 AT yahoo.co.in
CAREER OBJECTIVES
To achieve the ultimate goal by continuous developing my technical knowledge as well as to serve the organization through challenging job.
TECHNICAL SKILL SET

Subject
- Basic of Microprocessor (8085), Digital Electronics , Process Instrumentation.
- MS Office,”C”, Autocad(2007)
Training And Project
Training : short term training in industrial automation from WEBEL ACA.
Project :
TITLE : Level Control set up.
OBJECT : Designing a Level Control set up using DP Transmitter.
Working Experience
September 2006-March 2007 Worked as a Trainee Engineering in VIAT
INSTRUMENTS PVT. LTD.
August 2010-October 2010 Worked as a Trainee Engineering in VIAT
INSTRUMENTS PVT. LTD.

Professional Qualification
2010 B.Tech. in Applied Electronics & Instrumentation Engineering from Netaji Subhash
Engineering College, West Bengal University of Technology with DGPA 7.9.

2006 Diploma engineering in Instrumentation Technology from A.P.C Roy Polytechnic,
West Bengal State Council of Technical Education with 71.17% marks.
Academic Qualification
2003 Higher Secondary (Science) from Batanagar Girls High School, West Bengal
Council of Higher Secondary Education with 51.1% marks.
2001 Secondary from Batanagar Girls High School, West Bengal Board of Secondary
Education with 67.38 % marks.

[M.Ashraf]

Respected Sir

I am ashraf. Having one & half years experience in Electrical design. I am interest to work in you cioncern. i have attached my CV to your Id. please consider my RESUME. This is my E-Mail:mailme2ashraf@gmail.com

[Guest]

This is V.N.Raju. I need Instrumentation job vacancies. please let me know.

[vnrajuinst99]

V.N.RAJU
Email : vnrajuinst99 AT gmail.com
Instrumentation Design Engineer/INtools Engineer
CareerGoals :
To obtain a position as an Instrumentation Design Engineer where my skills and abilities will be utilized to enhance the productivity of the organization.
Summary :
- Possess 6+ years of professional experience in developing, designing and installing equipments for monitoring and controlling engineering systems for Oil & Gas, Refinery and Power plant.
- In-depth knowledge of data sheets, instrument drawings, I/O wiring diagrams, P&IDs, calculation and specifications
- Extensive knowledge of Instrumentation Design & Control Design Process
- Possess excellent command over verbal and written communications
- Ability to troubleshoot, repair and maintain instruments and instrumentation systems
- Familiar with ISA standards.
- Extensive knowledge of instrument communication systems and approaches of measurement technologies
Software skills :
- Instrumentation Design Tool’s (INtool’s)Intergraph’s Smart Plant Instrumentation (SPI) 7.0
- Spread Sheet/Office Packages :- MS-Office 2003,2007
Experience :
1) Monarch Techno Engineering Solutions Pvt. Ltd, New Mumbai, India May 2012 to tilldate(Deputation in Amec Black cat)
Client :Oxy petroleum,Qatar
Designation : Instrumentation Design Engineer
Project :
1)Oxy petroleum.
- Preparation of Instrument schedule.
- Preparation of D.C.S I/O schedule.
- Preparation of Cable schedule.
- Preparation of Data sheets for control valve, flow elements, Instruments.
2) Monarch Techno Engineering Solutions Pvt. Ltd, New Mumbai, India Sep 2008 to May2012

Client : Jacobs Engineering ,Mumbai
Designation : Instrumentation Design Engineer
- Preparations of Instrument index by review the P &ID with the use of INtools.
- Preparation of cable Schedules & Interconnection diagrams.
- Generating instrument loop diagrams for Conventional and Foundation field bus (FF) using enhanced smart loop in INtools.
- Preparation of Instrument specification sheet (ISS) with the use of specification module and process module in INtools.
- Preparation of Process Hook-Ups and Pneumatic Hook-Ups with the interpretation of INtools.
- Performing cable sizing, cable routing & scheduling with INtools & Excel.
- Preparation of Instrument mounting typical and Material Take-off list (MTO).
- Onsite coordination for the modification and updating of Hook up, index, Additional Loop creation, MTO etc.
- Selection & Sizing of various Instruments like control valves, flow meters, thermo wells etc.
Projects Completed :
- Hydrogen Plant + Two Plants (INOX Air Products – Bhiwadi) Detailed and Design
Engineering - Ongoing Project.
- Nederland’s Aardolie MIJ B. V. – Oil Field Redevelopment INtools Project.
- British Petroleum – Houston Texas – USA (As-Built)
- Panipat Refinery
- Cuddalore Refinery(Nagarjuna Oil Corporation)
- Bongaigaon Refienery(IOC)
- Berry Gas Plant, Jubail, KSA
3 ) Daksh Engineers-Gurgaon, Delhi-India July 2006 To Aug 2008
Designation : Instrumentation Design Engineer
- Preparation of Instrument I/O List, overall & detailed ILDs, Schedules & Interconnection diagrams.
- Selection & Sizing of various Instruments control valves, orifice plate.
- Preparation of Instrument specification sheet (ISS), Instrument installation schedule (IIS).
- Performing cable sizing, cable routing & scheduling.
- Preparation of Instrument mounting and piping drawing, Material Take-off list (MTO).
- Preparation of Instrument index sheet.
- DCS & Instrument panel layout inside control room.
- Preparation of Junction box details and Cable tray layout design.
- Vendor drawing review (NMR) & Coordination with other disciplines.
- Interaction Project, Proposal, Procurement & Construction team.
- Preparation of project scope of work.

Projects Completed :
- Indian Oil Corporation Ltd. (I.O.C.L. Gujarat Refinery) Baroda
- Rayong Purifier Refienery(Rayong Purifier Company)
- Jamnagar Export Refinery Project (JERP)(MEROX PLANT)
M/s Reliance Industries Ltd. (RIL Jamnagar)

4) PENNA POWER Pvt Ltd, A.P as an Instrumentation Engineer. From Jun2005 to Jun 2006
- Responsible for calibration, installation of field instruments and field JBs in the unit.
- Carrying out Commissioning activities like loop checking, sequence and logic checking of the newly added facilities and units.
- Communication Protocols Ethernet, Modbus, Profibus, Optical, modulebus.
- Deciding instrument JB and its locations according to Layouts.
- Installation, Mounting & Erection of all field Instruments like RTD, ZSS, Level.
- pressure, Flow transmitters, Ultrasonic Level transmitters, Radar level transmitters
- Erection, testing and commissioning of the instruments like Pressure Switches.
- Temperature elements, Level switches, Level gauges, Control valves, Dampers.
- Speed sensors, Vibration probes and all gauges etc..
- Pneumatic conveying system.
- Supervision of Cable glanding and termination of all field instruments, DCS marshalling, System cabinets and in electrical panels.
- Planning & Execution of site activities, Installation and pre commissioning assistance.
- Working along with Team for loop cheks and trouble shooting.
- Closely coordinating with vendors to functionally checking of all handling over to operations
- Supervision of installation of instruments, valves and Installation of Air tubing, Impulse tubing & analyzer tubing.
- Inspection of Certified equipment on the platform on all systems i.e. Junction Boxes, Panels, glanding Termination for I.S (insintrically safe circuits & Non I.S), trays, ladder racks its supports.
Areas of Interest :
- To develop and design instrumentation systems and procedures to cover a range of data for evaluation programs.
- To design Instrumentation equipment that operates effectively, efficiently and in safely way.
- To develop Instrumentation and Piping Diagrams.
Educational Summary :
- Bachelor's degree in Electronics Engineering, From V.A.G.E, (2005).
- Diploma in Instrumentation Engineering, Govt .Polytechnic, (2001).
DECLARATION
I hereby declare that the information’s furnished above are true to the
best of my knowledge and belief.

(V.N.Raju)