DOPET Doha Qatar : ESTIMATION ENGINEER

[Admin]

SR. ESTIMATION ENGINEER (Mechanical)
Qualifications required
* Diploma or Degree in Mechanical Engineering
* Proficient in the use of MS Office Software
* Good command of English written & spoken

Duties & Responsibilities
* Receives and evaluates tenders and enquiries
* Preparation of prime cost estimates, tenders in accordance with client requirements and risk analysis for justification of contingency if any for submission to management to apply mark up and arrive at tender submission price
* Prepares cost comparison sheets for all supply & Sub-contractor items
* Do pricing for the complete project as per company’s pricing format
* Attends to Internal Kick-Off Meeting & hand over all the contract documents to the Project team & clarifies all doubts, as and when required

To apply, please send your updated resume in MS Word Format plus all the pertinent certifications for evaluation and review via Email: engrjobs@dopet.com


DOPET was established in 1981 to cater the Oilfield Maintenance activity in the State of Qatar.

Catering to the fields like Oil, Gas, Petrochemical and Utilities Industries, both Onshore and Offshore, DOPET has now grown into one of the largest Mechanical Construction Company in Qatar.

Powered by a dedicated team of Professionals, a strong Workforce and sophisticated Machineries and Equipment, DOPET has successfully carried out diverse assignments in areas like Fabrication and Installation of Piping and Structural, Fabrication of Pressure Vessels and Tanks, Electrical, Instrumentation, Valve Overhauling, etc.

www.dopet.com

[Guest-IJT]

Name : Jayesh
Email : jmodasiya AT gmail.com
Designation / Skillset : Estimation and Proposal Project Engineer
Seeking an assignment in Oil & Gas field and Mechanical projects, where I can utilize my profound knowledge. Looking for a company where I can enhance my work for further growth of the company and I can also gain success

Resume :
OBJECTIVE
1 Seeking an assignment in Oil & Gas field and Mechanical projects, where I can utilize my profound knowledge. Looking for a company where I can enhance my work for further growth of the company and I can also gain success.
PERSONAL PROFILE
1 A dynamic professional with more than 10 years of experience in - Oil and Gas Sector - Erection and Dismantling - Installation & commissioning - Operations & Maintenance - Customer Support - Project Management
2 Presently associated with AL FAHIDI GASTECH LLC, DUBAI, UAE as Sr. Design, Projects and Estimation Engr..
3 Enterprising leader with excellent analytical, organizational and interpersonal skills.
4 Proven skills in conducting work in Multi disciplinary activities for execution of Turnkey Projects.
5 Expertise in swiftly ramping up projects with competent cross-functional skills and on time execution.
6 Excellent in handling Turnkey Projects in different aspects by taking into confidence the client, consultant and contractor working in that area.
7 Handling Environment Health & Safety Department Inspections, Dubai Civil Defense (DCD) Inspection and Abu Dhabi Civil Defense (ADCD).
8 Having expert knowledge for handling finance related to project planning.
9 Distinction of handling key International clients like ENGINEER OFFICE, EMAAR, NAKHEEL, ALDAR, MASDAR, ZABEEL PROPERTIES, UNION PROPERTIES, DAMAC PROPERTIES and etc.
10 Distinction of handling key Indian Clients like GAIL, AIRPORT AUTHORITY OF INDIA, MUNICIPAL CORPORATIONS, GWSSC, GEB and etc.
AREA OF EXPERTISE
Project Execution :
1 Interact with clients, contractors, sub contractors, consultant to conceptualize project execution plans, finalize scope, handle of sites and conducting project evaluation in terms of outlays and profits attached.
2 Establish time span of execution of Multi-location Projects as per client specifications and requirements.
3 List down the resource needs for projects, after considering the budgetary parameters set.
4 Coordinate with Vendors, System Integrators for completion of project within committed timelines.
5 Monitor project status during the course of periodic project review meetings.
6 Monitoring adherence to quality systems and comply with quality standards along with approvals from consultant.
7 Maintaining all necessary documents to meet ISO Audit requirements.
8 Updating all the mechanical software required for finalizing the projects.
Operations & Maintenance/ Technical Support :
1 Plan and effect preventive maintenance schedules of Pipelines and various Mechanical equipments to increase equipment reliability.
2 Upgradation of all the safety systems related to Oil and Gas sectors.
3 Troubleshoot and provide Route Cause by Analyzing and ensuring the implementation of the same.
4 Conduct fault analysis & identify scope for equipment up gradations for enhanced operational efficiency.
5 Technical support / Training to clients and Site Engineers for resolving critical technical issues.
6 Provide and submitting field technical complaints, analysis, DAS report and MIS reports to Head Office.
7 Identify performance bottlenecks and taking adequate measures to rectify faults occurred during the work.
8 Design the pipeline size with the help of Software packages
9 Complete grip on LPG/ SNG/ NG related works and trouble shooting of all related problems.
CAREER HISTORY
1 Feb’06 – Till Date Al Fahidi Gastech LLC, Dubai, UAE as Sr. Design and Estimation Engr, Project Incharge
Notable Distinctions :
1 Al Fahidi Gastech LLC deals in the field of Liquefied Petroleum Gas (LPG) / Synthetic Natural Gas (SNG) and Natural Gas (NG)
2 Presently handling turnkey projects related to installation of LPG Tanks, pipelines, safety systems for supply of LPG, SNG & NG to Commercial and Industrial & Domestic Customers in all over Dubai and Abu Dhabi in United Arab Emirates.
3 Installation of different capacity of LPG Tanks and laying pipeline for supply of LPG Gas.
4 Installation of complete safety system for smooth supply of LPG/ SNG and NG gas to required suppliers and customers.
5 Installation of all the safety equipments like Gas Control Panels, Gas Detectors, Explosion proof detectors, pipe in pipe detectors, solenoid valves, regulators, sounder, emergency switch and others as required for pipe networks.
6 Installation of all the safety equipments like Gas Control Panels, Explosion proof detectors, Solenoid Valves, regulators, sounder, emergency switch and others as required for installation of LPG Tanks.
7 Uninterrupted gas supply to all the customers keeping in the mind all the safety aspects laid by DCD & ADCD.
8 Complete installation as per NFPA 54 & 58 and as per the rules and regulations of DCD and ADCD.
9 Attending all the inspections and approvals from DCD & ADCD.
10 Filling of LPG tank as per the aspects and requirements from EHS Dept. Emirates Gas and DCD & ADCD.
Assignments handled :
- Burj Khalifa, Armani Night Club & Prive Preck, Burj Dubai, UAE
- Meydan Racecourse for H.H Sheikh Mohammad Bin Rashid, Ruler of UAE
- Discovery Gardens, Dubai, UAE
- ADNOC Filling Station, Abu Dhabi, UAE
- Burj Al Arab, Dubai, UAE (Modification)
- The Lofts, Dubai, UAE
- Old Town Residential, Burj Dubai, UAE
- Business Park I & II, Burj Dubai, UAE
- Index Building, DIFC, Dubai, UAE
- Dubai Mall, Dubai, UAE
- Mirdiff City Center, Dubai, UAE
- Zabeel Saray, Palm Jumeirah
- One & Only Royal Mirage Phase 3, Palm Jumeirah
2 Oct ’04 – Feb’06 Saket Project Limited, Ahmedabad, Indiaas an Executive (Projects Energy Management Division)
3 July’02 – Oct ’04 Neptune Spinners India Limited, India as Utility Maintenance Engineer
4 April ’01 – July ’02 Rachna Corporation, India as Service Engineer
OTHER IMPORTANT ACCESSTS
1 Contract management.
2 Acquired knowledge of Gas Detection Technique, Manual Handling, Avoidance of Buried Apparatus, Breathing Apparatus, Protection of Excavations, Trench Support, PE Technology, Gascoseeker, Safety and Competence Training.
3 Design aspect of Medium Pressure/Low Pressure Polyethylene Network.
4 Time Management and Team Building.
5 Expert knowledge of international standards code of pracrise of NFPA 54, NFPA 58, Local Authority Regulation and etc, for Central Gas Distribution systems.
6 Involvement in Project Handling and post sales planning, conducting vender training, Safety and Competence Training, Project Implementation.
ACADEMIC HIGHLIGHTS
1 Diploma Engineering in Mechanical from Gujarat, India
2 Executive Master Programme in Business Management Studies, Specialization in Operations Management, Mumbai, India
PROFESSIONAL QUALITIES

1 Management : Project, Staff, Contractor, Labour Management & Finance.
2 Test Equipments : Ultrasonic Flow Meter, Digital Pressure Gauge, Termometer, Flue Gas Analyze, Electro Fusion Machine, Orbit Welding Machine and other Mechanical equipments.
3 Software : Auto Cad, MS Office, MS Project (Basic), Primavera P6.
-------------------------------------------------------
More Information about this submission and submitter :-
___________________________________________________
Submission ID : 4152933
Date & Time : 19th May 2011 6:52 PM (UTC)
IP Address : 2.49.90.134
Browser Info : Mozilla/5.0 (Windows NT 5.1) AppleWebKit/534.24 (KHTML, like Gecko) Chrome/11.0.696.68 Safari/534.24
Predicted Country : --

[Guest]

RANGANATH CHAKRABORTY
POST APPLIED FOR : QAQC/ PROJECT /CERTIFICATION PROFESSIONAL
OBJECTIVE :
With the optimum use of skill, knowledge and experience, want to be a part of growth and development of the organization and better utilization of scope of work in the areas assigned.
QUALIFICATION (TECHNICAL AND OTHER SPECIFIC) :
Bachelor of Engineering (Electrical) from Bangalore University( 1993)
Diploma in Electrical Engineering from E&ITI, AF Govt. of India (1989)
Diploma in Instrumentation Engineering (Provisional- 2006)
Diploma in Railway Engineering from IPWE, New Delhi, Govt. Of India(2005)
Certificate of Graduation by Govt. Of India (2003)
SPECIALISATION :
Certified Auditor, IRCA, Certification No. 01198105 (Saudi Arabia) after completion of Lead Auditor Course through LRQA, India from IRCA, London.
IEEE membership, Member No. 91197724, Region : R8- Europe, M East, Africa
IAEI (International Association of Electrical Inspectors) membership, Member No. 7070555
Quality Assurance Service(QAS) course approved by DGQA, India(2000)
Primavera 6.0 from PMI, USA through KLG Systel , India (Rep no.2370) (2007)
Industrial Security Officer Course from ISSTS, Nasik, India (2006)
Security training certificate from Indian Air Force (1989-2006)
PTW, H2S certificate/ escape mask training from Qatar Gas, Qatar (2008)
TOTAL EXPERIENCE :
Overall 20 Years (Approx) Experience in the Field of Engineering related to Quality Control, Production, Maintenance and Construction (Oil & Gas and Other), out of which 11 years (approx) has been in the field of QAQC/Inspection.
PROJECTS HANDLED INDEPENDENTLY
CAPITAL PROJECTS : 1. Control Sulfur Emission Project in Berri Gas Plant for Saudi Aramco
2. Waste Water Plant Project in Juaymah Gas Plant for Saudi Aramco
3. LNG Storage Tank Facilities Project in Ras Laffan For Qatar Gas, Qatar
4. Khursanyah Gas Plant Project (KGP) For Saudi Aramco
5. Abu Ali Pipeline Project (GOSP) for Saudi Aramco
6. Avionics Maintenance Project in India for Govt. Of India

MEDIUM VOLUME PROJECT : 1. 16 MMR PLC up gradation project in Berri Gas Plant for Saudi Aramco
2. Metering Skid Facilities Project of Saudi Kayan for Saudi Aramco
3. Metering Skid Facilities Project of Al Nazi Factory for Saudi Aramco
4. Metering Skid Facilities Project of AAC for Saudi Aramco
5. RFID Project in Berri Gas Plant for Saudi Aramco
6. Substation Project (Power Plant) in Punjab for Govt. of India
7. Calibration Room/ IMMOLS Set Up Project in Kanpur for Govt. of India
EXPERIENCE IN MIDDLE EAST :
PROJECT : ABS CONSULTANCY, SAUDI ARABIA FOR SAUDI ARAMCO IN BGP (BERRI GAS PLANT , ABU ALI PIPE LINE AND THIRD PARTY PROJECTS)
PERIOD : 08 NOV 09 TO PRESENT
POSITION : Sr. Inspection Engineer Electrical & Instrumentation and Cathodic Protection. (Reporting to Quality Director- Sarifuddin Ahmed/ Mr. Gondal H. Mumtaz/Mr. Ramasamy K.)
RESPONSIBILITIES : Carrying Out Inspection Activities Related To E&I And CP For Assigned Project. Review of documentation/QCP/ITP, review of E&I drawings, scheduling of man hours and other project related assignments. Presently having responsibilities of looking after three sites (Berri Gas Plant control sulphur emission project, plc up gradation project, Abu Ali pipe line project and National Chevron Philips (third party) project) as client representative (Saudi Aramco, SAPID).doing root cause analysis, risk based inspection and working on sap within Saudi Aramco facilities are the scope of work individually being performed by me. The responsibility is including but not limited to monitoring and inspecting HVAC activities taking place in the areas assigned. Involved in scheduling the assigned responsibilities as well as planning for timely completion of the projects based on strategic data and other factors.
PROJECT : QGII ON SHORE PROJECT LNG TANK FACILITIES UNDER ISHIKAJIMA-HARIMA HEAVY INDUSTRIES (IHI) CO. LTD, JAPAN (CONTRACTOR: CTJV, CLIENT-QATAR GAS), QATAR
PERIOD : 07 JAN 08 TO 30 APR 09
POSITION : Senior QAQC Engineer (Reporting to FQM- Mr. Trevor Walker)
RESPONSIBILITIES : Monitoring And Carrying Out Inspections Related to E&I Activities and Other For LNG Tank Facilities Project which includes Installation Of FT, PT, Manual Call Point, Control Valves (Globe & Butterfly), PG, Instrument Tubing, Emergency Push Button, Pump Hoist, Cathodic Protection, Functional Testing Of Skin Temperature Elements, Cable Tray Installation(Instrument & Electrical),Pump Motor Installation, Lighting Fixture And Receptacle Installation, Lightning Protection Installation And Under Tank Heating System Installation Etc. Apart from the direct inspection, carrying out Root Cause Analysis, Risk Based Inspection and working on SAP within IHI facilities are the scope of work individually being performed by me, also Quality Audit, making of QA/QC related documentation, Preparation and Carrying Out Loop Test, revision of ITPS’ & QCPS’, assisting in making of revision of drawing as per constructional requirement, Commissioning Of Cathodic Protection System, DCPS (Dry Chemical Powder System) for LNG tanks facilities etc. The responsibility is including but not limited to monitoring and inspecting HVAC activities took place in the areas assigned. Involved in scheduling the assigned responsibilities as well as planning for timely completion of the projects based on strategic data and other factors with the use of system tools as like primavera.
PROJECT : KHARSANYA GAS PLANT (KGP) PROJECT UNDER CCC, WLL
(CONTRACTOR : BTJV, COMPANY- SAUDI ARAMCO), SAUDI ARABIA
PERIOD : 15 FEB 2007 TO 31 AUG 2007
POSITION : QA/QC INSPECTOR (INSTRUMENTATION) ( Reporting to Deputy Manager- Suleiman Farid)
RESPONSIBILITIES : Installation Inspection Of Cable Tray, Conduit, Cable Laying, Duct Banks And Other In Substations, PIB'S, MCC'S And In Field Installations, Also Loop Checking Along With Documentation As Per NEC, SAES And Other Adopted Standard (ISO 9001-2000 Etc) And Preparation Of Quality Audit Report. Apart From the Stated Responsibilities Doing Root Cause Analysis, Risk Based Inspection and working on SAP within Saudi Aramco Facilities are the Scope of Work individually Being performed by me. The responsibility is including but not limited to monitoring and inspecting HVAC activities took place in the areas assigned. Involved in scheduling the assigned responsibilities as well as planning for timely completion of the projects based on strategic datas and other factors.
EXPERIENCE IN INDIA :
PROJECT : MAJOR OVERHAUL PROJECT (AVIONICS) AND GENERAL CONSTRUCTION PROJECT UNDER INDIAN AIR FORCE IN MAHARASHTRA, INDIA
PERIOD : SEP 2005 TO DEC 2006
POSITION: QAQC E&I SUPERVISOR (Reporting to Department Head)
RESPONSIBILITIES : Supervisory Inspection of calibration of Pressure Gauges, Pressure Release System, control valve, flow metering, grounding & bonding, meggering and installation of conduits/cable trays. It includes review of E & I drawing, documentation (QC related), and imparting training to subordinates. Apart from the stated responsibilities doing root cause analysis, risk based inspection and working on IMMOLS/IPRMS within facilities are the scope of work individually being performed by me. The responsibility is including but not limited to monitoring and inspecting HVAC activities took place in the areas assigned. Involved in scheduling the assigned responsibilities as well as planning for timely completion of the projects based on strategic data and other factors.

PROJECT: MAJOR SERVICING PROJECT (AVIONICS) AND SUBSTATION (POWER) PROJECT UNDER INDIAN AIR FORCE IN PUNJAB, INDIA
PERIOD: JUN 2000 TO SEP 2005
POSITION: E & I SUPERVISOR (Reporting to Department Head)
RESPONSIBILITIES: Supervision of servicing of instrumentation and electrical equipments i.e. hydraulically & pneumatically operated Pressure Gauges, Precession Instruments (Navigational), cable routing, witnessing installation of grounding cable and servicing of avionics equipments. It includes execution of Techno-Administrative duties, reviewing of instrumentation drawing, guiding subordinates to execute and briefing superior about the job progress. The responsibility is including but not limited to supervision HVAC activities taking place in the areas assigned. Involved in scheduling the assigned responsibilities as well as planning for timely completion of the projects based on strategic data and other factors.
PROJECT: MAJOR OVERHAULING PROJECT (AVIONICS) AND CONSTRUCTION (CALIBRATION ROOM, SUB STATION) PROJECT IN KANPUR, INDIA
PERIOD: NOV 1995 TO JUN 2000
POSITION: QC INSPECTOR (E&I) (Department Head)
RESPONSIBILITIES: Receiving Inspection for materials being indigenised, witnessing of material testing, inspection of servicing, calibration of instruments, installation inspection of cable trays, conduits, routing etc. it includes documentation as per NEC and other adopted standards. The responsibility is including but not limited to monitoring and inspecting HVAC activities took place in the areas assigned.
PROJECT: MAINTENANCE PROJECT (AVIONICS) AND GENERAL CONSTRUCTION PROJECT (HVAC)
PERIOD: MAY 1989 TO OCT 1995
POSITION: LEAD E & I TECHNICIAN (Reporting to Senior Supervisor)
RESPONSIBILITIES : major servicing of MIG series (Mig-23 BN) aircraft electrical and instrumentation systems and equipments, calibration of general instruments used for installation set up, maintenance of complex defence installations, technical documentation in accordance with the adopted standard and other specific. The responsibility is including but not limited to monitoring and executing HVAC activities taking place in the areas assigned.

SKILL:
Take up management job with the overall responsibilities of controlling the QA/QC team under one distinguished umbrella.
Co-Ordinate planning and scheduling of man hours, material and other tools to complete any project towards timely completion.
Capable of making the quality control/quality maintenance procedure in accordance to the adopted standard as per the requirements(activity wise)
Capable of planning manpower control as per the requirement of the project and execute according to that.
Organize TQM system and controlling the project as per the requirements proposed during contract agreement.
Reviewing of all types of drawing and guiding the subordinates in accordance that.
Involve in the process recruitment to get the skilled manpower for smooth execution of project.
Instruct the subordinates technically and administratively to get the maximum out of them by making them quality and safety aware.
Continuous interaction with management representatives to ensure smooth running of the project.
REFERENCE
1. Mr. Shrikant M Desai, Senior Inspr Engineer, ABSG Saudi Arabia for Saudi Aramco, Cont: 00966544588270, E Mail: mutalisx AT aramco.com
2. Mr. T Ishigaki, Site Manager, IHI Co. Ltd for QGII LNG Tank
Facilities Project, Cont: +974-5877421, E Mail: Ishigaki AT ihigulf.com
3. Mr. T Ikeda, Asst Manager (E&I), IHI Corporation, Japan
Contact: +81-9098149657, E Mail: takayuki_ikeda AT ihi.co.jp
4. Mr. Sarif Uddin Ahmed, Sr. Inspection Engineer, Cont: 00966551650773,
E Mail: Mohammed.Ahmed AT satorp.com
5. Mr. Suvendu Mukhopadhyay (Ex- Indian Air Force), Operation Manager, Writers Corporation, India. Contact: 00919874645566, E Mail: suvendu.mukhopadhyay AT writercorporation.com
PRRSONAL DETAILS:
1) Current salary (CTC): USD 4500.00 with 48 hrs/ week + accommodation + transportation + food.
2) Expected Salary: USD 8000.00 pm or as per the company standard.
3) Total Experience in Years: 19 years 3 months.
4) Experience in QAQC Scope of Activities: 10 years 5 months.
5) Experience in Oil & Gas Industry: 6 years (approx).
6) Current Organization: Saudi Aramco Thru ABSG Saudi Arabia as client
Representative (SAPID).
7) Current Location: Al Jubail, Saudi Arabia BGP (Berri Gas Plant)
8) Current designation: Sr. Inspr engineer (E&I and CP)
9) Date Of Birth: 03 April 1967
10) Required Days For Joining: One Month
11) Passport Availability: 26 Jul 2019
12) Driving License: Saudi Arabia (Valid Till 2019), India (Valid Till 2017)
13) Experience In Planning: Refer CV (8 Years)
14) Nationality: Indian

[Guest]

Apply for the post of Estimation Engineer