DOPET Doha Petroleum Construction Company Ltd : EPIC Mechanical PROJECT MANAGER

[Admin]

PROJECT MANAGER (Mechanical - EPIC)

Requirements
* Degree in Mechanical Engineering or Project Management
Managing EPIC or EPC Projects - Technical, Commercial & Safety.
* 5 yrs. experience in the same capacity as Project Manager (Mechanical) within Oil & * Gas environment dealing with EPIC with on shore & off shore experience
* 10 years Overall Project Management experience as Primary Contractor
* Good Negotiator, Team Builder and Man Manager
* Good in English communication both in oral & written
* Age below 55 years old

To apply, please send your updated resume in MS Word Format plus all the pertinent certifications for evaluation and review via Email: engrjobs@dopet.com


DOPET was established in 1981 to cater the Oilfield Maintenance activity in the State of Qatar.

Catering to the fields like Oil, Gas, Petrochemical and Utilities Industries, both Onshore and Offshore, DOPET has now grown into one of the largest Mechanical Construction Company in Qatar.

Powered by a dedicated team of Professionals, a strong Workforce and sophisticated Machineries and Equipment, DOPET has successfully carried out diverse assignments in areas like Fabrication and Installation of Piping and Structural, Fabrication of Pressure Vessels and Tanks, Electrical, Instrumentation, Valve Overhauling, etc.

www.dopet.com

[Guest-IJT]

Name : ASHOK KUMAR
Email : ashishklnt AT yahoo.com
Designation / Skillset : Project Manager
I, Ashish Kumar, having an overall experience of more than 38 years in various projects (in NPCIL as a Scientific Officer Gr-D and M/s. Steel Works Pvt Limited as Project Manager). I hope my qualification and experience in the relevant field will meet your requirement. Please find enclosed my detailed Resume for your kind perusal and consideration.
Regards
ASHOK KUMAR

Resume :
Objective Highly motivated self confident and full devotion towards job.
Professional Experience OCT 1970-AUG 1982
Irrigation Research Institute Roorkee, U.P.State Government
Post Held : - Model Assistant,
Area of work : -
Involvement in conducting the physical properties of Building Construction Materials such as Cement, Bricks, aggregates & Structural Steel Sections as mentioned below.
Cement : - Normal consistency, Soundness, Fineness initial & final,
Setting time, Compression test.
Brick : - Florescence test, water absorption compression test.
Aggregate : - Fineness Modulus of fine Aggregate, Abrasions Valve of Coarse
Aggregate

Structural Steel Sections : - Tensile Test, Proof Test. Sep 1982-May 1997
Narora Atomic Power Project-1&2, (Nuclear Power Corporation of India limited)
Post Held :Scientific Assistant ‘B’ (Sep 1982-Nov 1986)
Scientific Assistant ‘C’ (Dec 1986 – Feb 1991)
Scientific Assistant ‘D’ (Mar 1991 -- May 1997)
Scientific Officer ‘C’ (Mar 1996 – May 1997)
Package executed / handled :

1) Handled the piping works of Waste Management Plant.
2) Supervision of the Fabrication of Vertical out side storage tanks with confirming IS CODE (803).
Nature of job : -
1) Handled the works of prefabrication, Welding of Embedded parts.
2) Handled the works of prefabrication Rolling, Erection, Welding, Hydro testing, Sand Blasting and painting works of out Side vertical storage tanks of process water Heavy Water, Turbine Oil, D.M. Water, Potential Active Waste, Non active Potential Waste and Active Chemical Waste etc
3) Piping of Waste Management Plants, Cleaning, Prefabrication, Welding, Erection, Hydro testing, Painting and Erection of piping and associated equipments like Pump & tanks.
4) Preparing of RA Bills, Material Accounting, Preparing system transfer Document and Construction Completion Certificate etc.
5) Prepared the Final Bill for the Waste Management Plant, Main Plant piping, & Processing of the bill to accounts Section.
6) Estimation of material.
7) Handing over of systems to O&M group/ Material reconciliation.
Rajasthan Atomic Power Project-3&4, (Nuclear Power Corporation of India limited)
Post Held :
Scientific Officer ‘C’ (June 1997 – Feb 2003)
Scientific Officer ‘D’ (Marc 2003 – 31st July 2008)
Package executed/ handled : -
1) Secondary Cycle Piping Package awarded on M/s. NICCO Corporation Kolkata..
2) Deaerator & Deaerator storage tank Package awarded on M/s. GEA Energy System.
Nature of job
1) Estimation and costing for work.
2) Planning the activity/ sequence in job to suit the clearance of fields
3) Preparing the monthly target in the line with completion schedule.
4) Coordinating with field engineer in execution of jobs.
5) Inspection of material and welded joints as per NPC procedure.
6) Preparation of test schemes for hydro testing of erected piping as per designed code.
7) Hydro testing of piping Systems such as Main Steam system, Feed water systems etc.
8) Erection of Secondary Cycle Pumps like Boiler feed pumps, live steam Drain Heater Pump moisture separate Drain Pumps Erection of Feed water heaters, Boiler Blow Down Coolers etc.
9) Erection of tanks Condensate storage tanks Auxiliary Emergency Feed water storage tanks (Capacity 240M3), Flash Tanks, Feed .water Heaters & Boiler Blow Down Tanks.
10) Erection of Deaerator & Deaerator Storage Tanks & Associated piping.
11) Material reconciliation, Preparation of final bill of the Packages
Post Held :
Project Manager (15 August 2008 – Till Date)
Package executed/ handled : -
24 MW Hydro Electric Project awarded on M/s. Steel Works Pvt. Limited in Rudrapryag Uttaranchal
Competency in job Technical
I had Handled Piping packages which consist of fabrication, erection, hydro testing of pipe line sizes 15NB to 2000NB, design pressure are up to 100 Kg/Cm2 and NDT requirements like Radiography, DPE and other activities like preheating, stress relieving etc. . Large equipments like Deaerator, & Deaerator storage tanks, feed water heaters.
I am fully aware of piping welding process like GTAW /SMAW and its requirements. Fabrication and erection codes confirming to ASME section III, VIII. ASME B31.1 (power piping code) and ANSI stds. I am also fully conversant the requirement of various standards of piping fabrication, welding, NDTs, Materials like ASTM, ASME- section III, VIII and IX
Academic qualification 1964 MADHYAMIC SHIKSHA PARISHAD ALLAHABAD, UTTAR PRADESH
Passed High School. With second Division.
1970 Bachelor in science from MEERUT UNIVERSITY, UTTAR PRADESH
Technical skills 1976 – 1979 UP Technical Board Kanpur, UTTAR PRADESH
Diploma in Mechanical engineering
Passed diploma in mechanical engineering from K.L. Polytechnic Roorkee.
Additional skills Basic Computer operation, MS OFFICE.
Languages HINDI, ENGLISH
Last Salary Drawn and Perks
Worked as an Executive Engineer since 2003(Central government pay scale Rs. 10000-325-15500).
Salary Rs. 31000/- p.m , Free family accommodation ,Free Conveyance, Free L.T.C-, Free family Medical, Free Telephone & Mobile, Free schooling for kids, C.P.F Rs 3000/- p.m) CTC Rs 45000/- p.m.
Expected salary CTC Minimum Rs 40,000/- per month.
DATE :
PLACE : Vishakapatnam (ASHOK KUMAR)
-------------------------------------------------------
More Information about this submission and submitter :-
___________________________________________________
Submission ID : 4134109
Date & Time : 15th May 2011 8:57 PM (UTC)
IP Address : 14.96.53.151
Browser Info : Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.17) Gecko/20110420 Firefox/3.6.17
Predicted Country : --