Chemical Engineer Production, Pharma API Visakhapatnam Vizianagaram : HR Excel India

[Admin]

HR Excel India Visakhapatnam Vizianagaram : Chemical Engineer Production
Company Name : HR Excel India
Company Location : Visakhapatnam Vizianagaram
Designation (of vacancy) : Executive Jr. Manager Manager - Chemical Engineer Production MNC API
Company E-mail ID : cv@hr9.in
Company Website : www.hr9.in

Job Description, Candidate Profile, Company Profile, Company Address :
5 - 10 years experience in Pharma API

Apply for the job
You are advised send your updated CV in the MS-Word format to cv@hr9.in with the CTC in the following file name in following format:
Eg: 2yrs_Krishna_BE-Mech_Chennai_3.2 lacs.
Remember to include the Position, Department, Industry you are applying to as the subject in mail
This will be useful for fast finding your CV from the lots.
for more vacancies visit us at www.hr9.in
HR Excel India wishes you all the best for your bright career
Save Water save Power Save Trees

[Admin]

HR Excel India Visakhapatnam Vizianagaram :
Company Name : HR Excel India
Company Location : Visakhapatnam Vizianagaram
Designation (of vacancy) : DGM Production MNC API
Company E-mail ID : cv@hr9.in
Company Website : www.hr9.in

Job Description, Candidate Profile, Company Profile, Company Address :
15 - 20 years experience in Pharma API

Apply for the job
You are advised send your updated CV in the MS-Word format to cv@hr9.in with the CTC in the following file name in following format:
Eg: 2yrs_Krishna_BE-Mech_Chennai_3.2 lacs.
Remember to include the Position, Department, Industry you are applying to as the subject in mail
This will be useful for fast finding your CV from the lots.
for more vacancies visit us at www.hr9.in
HR Excel India wishes you all the best for your bright career
Save Water save Power Save Trees

[Guest-IJT]

MONIKA SHIRNGI

OBJECTIVE :
To apply for job in Q.A./Q.C. or production department in your reputed company.

EDUCATIONAL QUALIFICATION :
Bachelor of Pharmacy : From B.N. Girls College of
Pharmacy, Udaipur - :
B.Pharma IV year during 2008-09 with 69%
B.Pharma III year during 2007-08 with 68%.
B,Pharma II year during 2006-07 with 67%.
B.Pharma I year during 2005-06 with 71%.
10+2 (Senior Secondary) : From Rajasthan Board of Secondary
Education, Ajmer (Raj.) during 2003-2004 with 70%.
10th (Secondary) with all Subjects : From Rajasthan Board of Secondary
Education Ajmer (Raj.) during 2001-2002 with 81%.

TECHNICAL SKILLS :
Instrumentation :
- A good practical knowledge of chromatographic techniques,
titrations, soxhlet apparatus tablet & capsule filling machine
(lab scale), clarity test apparatus, hardnesstester,u.v.spectroscopy.

Seminar attended :
- National Conference on recent trends of research in
pharmaceutical science, Nathdwara 7-8 January 2008.

Training at Lupin Pharmaceutical Limited Pharma unit II, Mandideep, Bhopal.

PERSONAL PROFILE :
Father’s Name : Mr. Vishnu Shringi
Date of Birth : 24th September 1986
Language Known : Hindi, English & Regional
Marital Status : Single

[Guest]

CURRICULAM VITAE
KADA RAMESH KUMAR
E-mail : rameki_rk AT yahoo.co.in
Summary :
A Chemical Engineering Post Graduate, having about Seven years of functional experience in Process engineering, new product, and Production activities.
Objective :
Looking forward to a very challenging career, which will help me in contributing my best for the organization as well as helping my desire to learn new technologies and think globally.
Personal Skills :
Comprehensive problem solving abilities, good verbal and written communication skills, ability to deal with people diplomatically, highly motivated to learn & research, team facilitator.
Educational Qualifications :
- M.Tech (Chemical Engineering) from S.V.U.College of Engineering,S.V.University in India, with Distinction (74.26%) in 2003.
- B.Tech (Chemical Engineering) from GMRIT / JNTU a reputed college in India with 68.21 % in 2001.
Work Experience :
01) BIOCON India limited
Bangalore,Karnataka.
July 2010 to till date.
Designation : Sr.Executive – Production.
JOB PROFILE :
- Exposure in DCS (ABB process Management – MMI)
- Responsible for the Planning the requirements based on production planning ,proper
utilization of manpower and achieving targeted yields with quality.
- Responsible for the process modifications and reengineering works.
- Proper energy utilization and consumption of utility loads
- Process improvements and set up time reduction
- Able to plan, co-ordinate and direct design and production activity
- Ensure optimum inventory levels for achieving cost savings without hampering the
production process and preparing reports for the same
- Establish systems, procedures and practices for smooth start-up of API operations and execution of API Production Plan.
- Responsible for timely installation, commissioning and validation of all the API
equipments in the Plant.
- Maintaining and up keeping the area as per the cGMP and Regulatoryrequirements
and puttingcontinuous efforts for improvement in quality and Productivity
- Handling manpower, resolving issues, team building, training and development of
Operating personnel and subordinates.
- Work independently to establish manufacturing process during introduction and
Development of new products.
- Recommend changes in methods or procedures and implement such changes as
approved.
- Control various load factors to assure maximum usage of available capacity taking into account available tools, labor and equipments.
- Planning, scheduling, execution and review of new product development.
- Development of In house process, line balancing, Capacity planning.
2). Worked as Sr.Executive - Production in PIRAMAL HEALTH CARE LTD. (July' 2007 to July’2010)
Responsibilities :
- Exposure in DCS (Emerson process Management – DELTA V)
- Handling of High pressure reaction (up to 17 bar) with continuous operation.
- Responsible for the production of HALOTHANE and ISOFLURANE Aliquid APIs
involving various unit operations i.e Distillations,Scrubbing,Extraction,Adsorption
with continuous operations involved through DCS.
- Familiar with Bromination,Chlorination(Batch & Continuous in presence of
UV Light),High pressure reaction & Hydrolysis.
- Responsible for commissioning of new equipment for the plant,
execution of capital proposals.
- Performing HAZOP review, which includes failure mode effect analysis, Critical
Care points, Process safety information, and emergency preparedness.
- Involving the production planning,Achieving targeted yields with quality.
- Planning the requirements based on production planning and proper utilisation of manpower preparing SOP's,following CGMP.
- Accountability for raw materials.
- Optimization of CCs by improving Solvent Recovery
- Implementing process optimisation and process improvement initiatives.
3)Worked as a Executive - Process in Aurobindo pharma Limited, India
(June’ 2003 - July’2007).

Responsibilities :
- Recovery of various solvents like MDC,Acetone,Methanol,IPA,Toluene,HMDO,
DMF,EA,THF,1,4 Dioxane,n-Hexane,TEA& MIBK through Contineous
Distillation columns.
- Play a proactive role in new product development,working in close conjunction with development,scale up of the new products,new reactions and Technology from lab scale to plant scale.
- Reduction of solvent losses in production area and in Recovery plant.
- Estimation of Material & Energy Balance in Each Stage of Product Mfg.
- Steam,Power and Utility based load calculations.
- Optimum utilisation of available resources striving for quality and yield.
- Well exposed to production activities.
- Process Optimization and Validation
- Scale-up and troubleshooting
- Participating in Quality & Process improvement initiatives.
- Technical support, problem solving and fault finding on production issues
- Implementing process optimization and process improvement initiatives.
- Review and improve yield and cycle times.
- Training and or providing work direction to technicians and manufacturing personnel
Achievements & Exposure :
- Coordinating with R&D to ensure the feasibility of the process in commercial scale and work with R&D to optimize the process.
- Well exposed to Technology transfer.
- Commercialized 8 products successfully.
- Established Solvent recovery system for various organic solvents.
- Proper energy utilization and minimization of utility loads.
- Optimization of various processes and cost reduction activities.
- I Got Certificates of Appreciation from Piramal Health care in the areas of
1) Work of Higher capacity utilization & productivity
2) Work of Productivity improvement in Halothane plant.

[Guest]

CURRICULUM VITAE
D.ARVIND KUMAR
Email : prasanna_dsp AT hotmail.com
CAREER OBJECTIVE :
To be associated with the organization that provides me an opportunity to work and improves my skills and knowledge and to be part of the team that works towards the benefit of the organization.
ACADEMIC PROFILE :
- BACHELOR OF TECHNOLOGY IN CHEMICAL ENGINEERING... from GMRITCollege JNTU , RAJAM (2005-2009).
- DIPLOMA IN CHEMICAL ENGINEERING (D.CH.E) with specialization in (PLASTICS & POLYMERS) from GIPDCE&T College by SBTE&T, Visakhapatnam (2000-2004)
- SSC from MNR SCHOOL, Visakhapatnam (1995-1996)
PROJECT :
- An industrial mini oriented project on COKE OVENS & COAL COOLING PLANT, Steel Plant, Visakhapatnam.
- An Final Project on LPG Production (ADSORPTION PROCESS)
- An Six months Industrial Training under apprenticeship Act in ANDHRA PRADESH PAPER MILLS, Rajahamundry.
- An Six Months Industrial Training under apprenticeship Act in HINDUSTAN COCO COLA BEVERAGES, Visakhapatnam.
STRENGTHS :
- Highly organized and dedicated with positive attitude.
- Good verbal and written communication skills.
- Ability to deal with people diplomatically.
- Willingness to learn.
- Patience

[Unregistered]

RESUME

Name : Dominic Savio Bitra
Date of Birth : 7 September1965
Email : dominicsaviobitra AT gmail.com

EDUCATIONAL QUALIFICATIONS :
B. Tech (Chemical Engineering) from Department of Chemical Technology, College of Engineering,Andhra University, Visakhapatnam with specialization in Bio-Technology and Polymer Technology

PROFESSIONAL EXPERIENCE :
I have 22 years of experience in large, medium, and small scale industries in the fields of organic chemicals, polymers, pharmaceuticals, biochemical, bulk drugs, and solvent recovery plants.

(a) Technical Services :
- Drive the technical services team to support Manufacturing teams during the life cycle management of products.
- Resolve technical issues to ensure uninterrupted high quality product supply to manufactured units.
- Familiar with all the manufacturing unit operations
o Fluid Mechanics : Fluid flow problems in pumps, flow meters, rotameters, venture meters, and in pipes, Flow through NRV’s
o Operational and troubleshooting experience in different types of pumps, centrifugal pumps, gear pumps, spur gear pumps
o Heat Transfer :Heat exchangers, coolers, evaporators, condensers, multiple effect evaporators, heaters, spray driers, and thermo compressors
o Troubleshooting experience of all types of heat exchangers, shell and tube heat exchangers, double pipe heat exchangers, plate type heat exchangers, extended surface heat exchangers and surface heat exchangers, multiple effect evaporators, spray dryer and fluid bed dryer
o Mass Transfer : Gas-liquid operations, absorption of gases in liquids and related equipments, distillation columns, Azeotropic distillation, role of molecular sieves in distillation. Multi component distillation, packed columns
o Operation and troubleshooting of distillation problems, continuous and semi-continuous column distillations. Raised film evaporators, falling film evaporators, forced circulation evaporators systems, thermo-siphoning evaporation systems
o Operation and troubleshooting of liquid-liquid extraction equipment, Podbielniak centrifugal extractor, packed towers, gravity decanters
o Adsorption& Ion exchange : Operation and trouble shooting of activated carbon beds, Ion exchange resin beds, optimization of existing equipment.Regeneration of activated carbon through steam and hot air, trouble shooting
o Solid-Liquid separation and mixing equipment operation and trouble shooting, experience in high speed equipment operation like Alfa Laval Disk centrifuges(vertical), commissioning and troubleshooting
o Operation and troubleshooting of filtration equipment, centrifuges bottom discharge and top discharge (60 in, 1500 rpm), pressure filters, agitated Nutsche filters

- Process troubleshooting and resolve technical issues quickly
- Evaluating the reaction mechanism and reaction path, evaluating reaction parameters for good yields
- Conducting process related R&D, finding cost effective alternative sources of raw materials, quality and productivity improvement
- Trouble shooting at the time of product launching, validation, documents preparation
- Meet the needs of current Regulatory, Environmental and health authorities’ standards.
Support quality team by providing technical inputs in investigations, addressing market complaints
- MIBK solvent consumption is reduced; scrubber is designed for HCl gas. 50% of the investment cost of process and utility pipe lines reduced by re-routed
- Marble grade resign (un-saturated polyester resin) was prepared and scale up to manufacturing. Chloroquin Phosphate manufacturing project is completed within the time period. Chloroquin Phosphate crystallization problem is rectified
- Reaction time of Acetanilide was reduced from 20 hrs to 13 hrs by studying the reaction kinetics and reaction mechanism, Quality of Acetanilide is improved
- Heat transfer problem in the heat exchangers of Acetic Acid and Acetic Anhydride plant was identified and rectified
- Optimized the continuous evaporation process of Ascorbic Acid solution in plate and frame evaporators. Increased the quality and quantity of the Ascorbic Acid
- Prepared the Process SOP’s, BMR’s and related documents for Ascorbic acid, and Lovastatin
- Optimized the continuous evaporation of toluene (concentration of Lovastatin solution) in RFE (Raised Film Evaporator) to the design level
- Optimized the Packed distillation columns to their design capacity. Designed the packed columns and converted the packed columns as multipurpose distillation systems
- Separated the different solvent mixtures with yield 80 to 98% recovery by using latest techniques of Azeotropic and Azeotropic-Azeotropic distillations
- Optimized the Centrifugal Contactor as a counter current extractor as well as a separator based on the physical properties of the liquids (Liquid- Liquid operations); Optimized the Disk stack separator for Solid-Liquid operations
- Pilot studies were conducted in Lipstatin extraction from fermented broth achieved 85% purity.
- Reaction time is reduced, raw material consumption is reduced, solvents consumption is reduced, in Simvastatin production plat

(b) Design, Project execution, Commissioning :
- Design of heat transfer equipment, shell and tube heat exchangers, surface heat exchangers, re-boilers, inspection of equipment at the time of fabrication
- Design of multiple effect evaporators
- Design of distillation columns, design of gravity decanters for continuous and semi continuous flow, design of storage tanks, design of receivers, design of reactors and mixing mechanism, reactors heat transfer system
- Design of filtration system, design of separating methods, process pipe lines, utility pipe lines, design of activated carbon beds, design of ion exchange resin beds, design of molecular sieve beds for various applications
- Preparation of process flow diagrams (PFD), preparation of process instrumentation diagrams(PID), preparation of utility flow diagrams
- Preparation of BOQ and making enquiry’s about equipment, coordination with purchase and finance departments. Negotiation with suppliers/vendors, selection of suitable material available from the market
- Project supervision, timely completion of projects, taking quick decision in the projects, trouble shooting in the project problems
- Project execution. P & ID’s diagrams, P & FD’s are prepared for new expansion blocks of Lovastatin, Simvastatin and Distillation blocks. Design of Process pipelines, Utility lines, pumps, instruments etc.
- Commissioning of the equipment, trouble shooting at the time of commissioning coordination with other technical staff and QC/QA and R&D departments
- Documentation of the commissioning activities as per the cGMP

(c) Production :
- Production planning, indenting raw materials in advance required for process, review of analytical results, review of production information, documentation of production activities
- Preparation of daily, weekly and monthly production reports. Discuss with unit head or Vice President about the results possible improvements
- Checking condition of all equipment, coordinate with other engineering departments and rectify if found any defects, monitor the preventive maintenance
- Give training to the down line people for improvement of their performance. Monitor the daily production activities and see that observations are recorded in BPR’s
- Experience in operation of distillation columns, continuous and semi continuous process. Operation of reactors at pressure as well as vacuum, temperatures ranges from +220 to -70O C.
- Operational experience of different chemical reactions nitration, chlorination, sulphonation, condensation, addition polymerization
- Operation of different filtration equipments like Agitated Nutsche filter, plate and frame filter press. Operational experience of spray dryer, fluidized bed dryer, hot oil heaters(Thermax TP-01)
- Experience in preparation of Standard/Safe Operating Procedures and Batch production records, review of BPR’s
- Conducting production related R&D and process optimization

(d) ETP and Pollution control :
- Pollution Control and Effluent treatment to meet the needs of current Regulatory, Environmental and Health authorities.
- ETP process and equipment design, optimization of existing process. Operational experience of ETP equipment separators, clarifiers and bio reactors.
- ETP commissioning, trouble shooting technical services
- Using new nutrients of lesser cost increased the existing MLVSS in the Bio Reactor. Problem in the Toluene recovery through vacuum system is identified and improved.
- In waste water recycling plant color problem was rectified, regeneration of activated carbon through steam was optimized. Operational problem of WIMCO oil separator and Auto gravity sand filter is rectified
- Optimized the Multiple Effect Evaporator and increased the evaporation rate from 2 KL/hr to 6 KL/hr. Alfa LAVAL decanter (solid liquid separator) successfully commissioned.
- Optimized the existing ETP by separating effluents coming from different sources. Reduced the load on bioreactor by flocculating the organic effluents using poly electrolytes. Optimized the spray drier to achieve zero discharge.

EMPLOYMENT RECORD :
Period Designation Employer :
October 2010 –till date Chief Manager– R&D, Process development and Projects (HOD) Krebs Bio Chemicals & Industries Limited, Kasimkota
December 2005- October 2010
Manager– Production and Process development (HOD) Krebs Bio Chemicals & Industries Limited, Kasimkota
March 2005 - December 2005 Manager- Projects Krebs Bio Chemicals & Industries Limited, Kasimkota
November 2004– March 2005 Manager- Production
Krebs Bio Chemicals & Industries Limited, Kasimkota
October 2003 – November 2004 Manager - QA
Krebs Bio Chemicals & Industries Limited, Kasimkota
September 2002- October 2003 Manager- Process
Krebs Bio Chemicals & Industries Limited, Kasimkota
August 2001-September 2002 Manager-Production D R Organics Limited, Ranastalam

July 2000 – August 2001 Manager – Projects Nitya Laboratories Limited, Hyderabad
February 1996 - July 2000 Assistant Manager – Technical Services Hindustan Organics Chemicals Limited, Rasayani, Mumbai
December 1994 - February 1996 Chemical Technologist Hicel Pharma Limited, Patancheru, Hyderabad
September 1991 - December 1994 Plant In-charge Amba Poly Resins (P) Limited, Patancheru, Hyderabad
May 1989 - September 1991 Shift In-charge Wipro Chemicals (P) Limited, Zeedimetla, Hyderabad

Current CTC : Rs600,000 per annum + Conveyance + HRA
Expected CTC : Negotiable

[Unregistered]

CURRICULUM VITAE :

CAREER OBJECTIVE :
To attain a responsible position in the financial services organization and work along with the organization by focusing on concepts.

EXECUTIVE SUMMARY :
- Having 6yrs of experience in handling branch individually.
- Strong presentation and Communication skills.
- Ability to integrate and harmonize successfully in the team.
- Initiation in learning and implementing new trends.
- Quick adaptability to new technologies and zeal to improve technical skills.

SUMMARY OF EXPERIENCE :
- Worked in SHRIRAM INSIGHT SHARE BROKERS LIMITED as a Trading Operator.
- Working in MANAPPURAM FINANCE COMPANY LIMITED as a Assistant Branch Head.

Employer : SHRIRAM INSIGHT SHARE BROKERS LIMITED
Position : Operator & Back Office Executive
Period : June 2006 to Dec 2010(Visakhapatnam).

Employer : MANAPPURAM FINANCE LIMITED
Position : Assistant Branch Head.
Period : December 2010 to Till Date (Visakhapatnam).

Job Profile :
- Driving business through identification of new customer groups/new companies for business expansion market penetration & reach.
- Creating awareness among the customers by handling promotional campaigns regularly.
- Motivation and performance evaluation of the team by going through Daily Sales Reports.
- Create and maintain a long-lasting customer relationship.
- Inviting the appropriate suggestions from the team members for better performance.
- Includes comprehensive financial planning & asset allocation and accordingly advising clients on investment products, viz. Mutual Funds, Insurance, Fixed income/debt market products and Hybrid products Relationship building with influencers and decision-makers for developing market
- Follow up the existing customers for references.

EDUCATION :
- Graduation in BSC (Comp) From Andhra University.

COMPUTER EXPOSURE :
- Operating Systems : MS Dos, Windows,
- Packages : Ms-Word, Ms-Excel, Ms-Power Point, Talley,
- Languages : C, C++.ORACLE.

PERSONAL INFORMATION :
- D.O.B : 17-08-1984
- SEX : Male

Place : Visakhapatnam (J.RAVI BABU)