L.Kashinath Seth Vidya Mandir Miranpur Katra : Principal

[Admin]

L.Kashinath Seth Vidya Mandir Miranpur Katra, Distt. Shahjahanpur. (U.P) : Principal
Company Name : L.Kashinath Seth Vidya Mandir
Company Location : Miranpur Katra, Distt. Shahjahanpur. (U.P)
Designation (of vacancy) : Principal
Company E-mail ID : kashinathseth@yahoo.in
Company Website : No website as yet

Job Description, Candidate Profile, Company Profile, Company Address :
Need an english speaking well experienced principal.
A good administator with command in english language and ability to create an academic environment for the students and staff.
Started the school 4 years earlier.
Situated at National Highway 24 in Miranpur katra, District Shahjanpur. (U.P)

[Guest-IJT]

Name : Arun Prasath
Email : arunpetro11 AT gmail.com
Designation / Skillset : Graduate Petroleum Engineer

Resume :
Seeking a challenging career with an organization in need of technological skills, multi tasking abilities and drive to exceed corporate objectives.
EDUCATIONAL QUALIFICATION
Bachelor of Technology in Petroleum Engineering 2011
Rajiv Gandhi College of Engineering
Anna University, Chennai.
Aggregate : 75%
Diploma in Polymer Technology (sandwich) 2007
Institute of Chemical Technology
Directorate of Technical Education, Chennai.
Aggregate : 74%
Secondary School Leaving Certificate (SSLC) 2004
Hindu Higher Secondary School
Tamil Nadu State Board, Vellore.
Aggregate : 81%
WORK EXPERIENCE
Supervisor Trainee 2007- 2008
Research & Development, Industrial Rubber Products ltd., Chennai, India
(Certified ISO 9001 & ISO/TS 16949)
Engage research in development of various in-house rubber components for automobiles and oil and gas industries. Conduct periodical testing on incoming raw rubbers and chemical additives. Worked on Viton-316 project, which a hose component specially designed for oil and gas industries.
Key Responsibilities :
New Product development.
Rubber Formulation designing.
Expertise in Viscometer (Viscosity analyzer), Universal Tensile Machine (Tensile strength analyzer), Densimeter (measures density), Rheometer (Rheology analyzer).
Preparation of process setting chart, test analysis report, dimensional check report.
Operational Standards document maintenance.
Worked on ISO 9001, ISO/TS 16949 audition
PROJECT EXPERIENCE
Engineering Project : Hydraulic fracturing on siltstone formation in western onshore fields.
Well : Kamij, Kalol.
Well Stimulation Services (WSS), Oil and Natural Gas Corporation, Gujarat.
Summary :
To predict maximum crude productivity by executing hydraulic fracture treatment in investigated environment.
Treatment executed on candidate well (aged), depth from 1159 to 1160.5m (Perforation interval : 1126- 1131m). Treatment come up against silt stone formation, Temp. 82°C and SBHP. 107.25 kg/cc.
Tree saver come to use during operation due to critical pressure (>6000 psi) overrides on fracture fluid injection.
The fluid system selected for the treatments allows the best possible production at estimated production rate (6- 7%).
Fracture fluid system formulated based on Water (2- 4% KCl dissolved) and Guar gel results more fracture in formation.
Diploma Project : Manufacture of hydrocarbon fuels from plastic wastes.
(Study experimentation)
Summary : (Experimentally tested and proved)
An eco- friendly project to put down the pollution of plastic wastes and convert it into valuable hydrocarbon fuels (Gasoline) via catalytic cracking process.
Plastic wastes are heated (thermal degradation) in the presence of catalyst (Octidyne 1160 based Zeolite, Zinc oxide, Titanium oxide) in fluidized bed at temperature of 773 to 823 K, 1atm. pressure after the completion of grinding, sieving, and pre-heating operations.
Best alternative fuel for I.C engines, generators, industrial & domestic furnaces, boilers.
TRAINING PROGRAMS
Two days field training at the Oil and natural Gas Corporation (ONGC) Karaikal asset and Gas Collecting Station (GCS) at Karaikal. OCT 2010
Summary :
Onshore training imparted the valuable practical knowledge on the technical aspects of petroleum exploration and production. The training provided “hands on experience” with field experts tackling critical issues related to technical and management works.
An Industrial visit on ‘Drilling Fluids and Cementing Techniques’ at the ONGC Regional Lab, Padi, Chennai. SEP 2009
Continuously associated with the ‘Society of Petroleum Engineers’ and attended various guest lectures by pioneers of the industry worldwide.
VP Engineers
Kandanchavadi, Chennai, India JUN ‘07 to AUG ‘07
Summary :
Manufacturer of inbuilt plastic components for power plants, refineries, petrochemical & other processing industries. Training period duration was 2 months.
During training, new project monitoring, failure mode effects & analysis, control plan, preventive maintenance of moulds & machineries, knowledge in Delrin, ABS (Acryl Butyl Styrene), Nylon, HDPE (High Density Polyethylene), PP (Polypropylene), etc. was observed.
Trained in :
Mould trial & trouble shooting
Injection moulding machines. (Supplier : Windsor Klockner, Angel equipped with micro processor)
Industrial Rubber Products (P) Ltd.
Guindy, Chennai, India AUG ‘07 to OCT ‘07
Summary :
Leading manufacturer for molded rubber components & hoses for automobile and oil and gas industries. Training period duration was 2 months. After completion of training, I was recruited in same company as Supervisor Trainee in Laboratory- R&D, based on work performance.
AFFILIATIONS
Student membership –
SPE RGCE Student chapter
Society of Petroleum Engineers
Society of petroleum Geophycists.
Society of plastic Engineers
COMPUTER PROFICIENCY
Operating System : WINDOWS, LINUX – Ubuntu 9.0
Application Software : MS- Office package, PhotoShop, Corel Draw
Technical Software : AutoCAD 2005
EXTRA CURRICULAR ACTIVITES
First prize in Quiz contest (inter polytechnic level).
First prize in Dump C (inter polytechnic level).
Third prize in Chess competition (Zonal)
REFERENCES
Dr. V. Stephen Pitchaimani, Ph.D,
Additional Dean (Academic),
Rajiv Gandhi College of Engineering, Chennai. India
Email : vspmstephen AT gail.com
Mr. V.Janardhanam M.E (Chem.),
Principal & Head (Polymer Technology),
Institute of Chemical Technology
Chennai, Idia
Email : principalict AT yahoo.com
Date :
Place : (S. Arun Prasath)
-------------------------------------------------------
More Information about this submission and submitter:-
___________________________________________________
Submission ID : 4268109
Date & Time : 17th Jun 2011 8:48 PM (UTC)
IP Address : 115.241.124.104
Browser Info : Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; .NET4.0C; .NET4.0E; .NET CLR 2.0.50727)
Predicted Country : India

[scsathishkumar]

S.C.SATHISH KUMAR
Bachelor of petroleum engineering
EMAIL : scsathishkumarpetro AT gmail.com

Obtaining a position, that allows me to utilize my skills and knowledge are put into usage thus contributing to the enhancement in total productivity of the organization.

EDUCATIONAL QUALIFICATION
BACHELOR OF TECHNOLOGY IN PETROLEUM ENGINEERING.
Aggregate of 78% Rajiv Gandhi College of Engineering (Anna University), India 2011.
DIPLOMA IN CHEMICAL ENGINEERING (SANDWICH).
Institute of chemical technology, India- 2007.
DIPLOMA IN INDUSTRIAL SAFETY.
Annamalai University, India - may 2010.
SECONDARY SCHOOL LEAVING CERTIFICATE.
Percentage : 92.8% . Kcs, Chennai, india. – 2003.
WORK EXPERIENCE : Plant Production Technician Trainee in manali petrochemical limited, india. 2007-08.
Roles & Responsibilities :
Off-site and On-site plants operation and production.
Safety and troubleshooting (permit systems).
PROJECT EXPERIENCE
Engineering Project : Hydraulic fracturing on siltstone formation in western onshore fields.
Well : Kamij, Kalol.
Well Stimulation Services (WSS), Oil and Natural Gas Corporation, ONGC, Gujarat, INDIA.
The purpose of this work is to predict maximum crude productivity by executing hydraulic fracture treatment in investigated environment.
STUDIES :
Coiled tubing activities & well activity jobs.
DIPLOMA PROJECTS :
(studies included)

- Separation techniques in Oil and Gas industries.
- Chemicals preparation (example : wall putty).
EXPOSED PLANT OPERATIONS ARE
- Waste water treatment.
- Milk of lime plant.
- Off-site plants and reactor columns.
- Agitation vessel (18 tons capacity).
- Transportation of fluids.
- Filtering Equipments (Rotary Drum Filter, Leaf Filter and PSF etc.).
DIPLOMA IN INDUSTRIAL SAFETY PROJECT :
Fire safety in petrochemical industries.
TRAINING :
ENGINEERING : (SEASON STUDY VISITS)
- Training in Oil and natural Gas Corporation (ONGC) Karaikal asset and Gas Collecting Station (GCS) at Karaikal, india.
- ‘Drilling Fluids and Cementing Techniques’ in the ONGC Regional Lab, Chennai, india.
- Continuously associated with the ‘Society of Petroleum Engineers’ and attended various guest lectures by pioneers of the industry worldwide.
DIPLOMA :
I.MANALI PETROCHEMICAL LIMITED India.
Trained in propylene oxide, propylene glycol, polyol production and offsite plants from JUNE 2007 to SEPTEMBER 2007 (4 months).
Season visit trainings :
Season visit process training in coromandel fertilizers limited, india.
State government training in safety and rescuing in industries as NSS volunteer.
PROFESSIONAL ACTIVITIES
Student membership - SPE rgce student chapter.
Society of Petroleum Engineers.
Society of petroleum Geophysicists.
COMPUTER PROFICIENCY :
Operating System : WINDOWS.
Application Software : MS-Office 2003.
Technical Software : AutoCAD basics.