www.shawgrp.com Shaw Stone Webster Ltd Saudi Arabia : Piping Design Engineer

[Admin]

Shaw Stone Webster Ltd Saudi Arabia : Piping Design Engineer
Company Name : shaw stone webster ltd
Company Location : saudi arabia
Designation (of vacancy) : piping design engineer
Company E-mail ID : sivchandran@gmail.com
Company Website : www.shawgrp.com

Job Description, Candidate Profile, Company Profile, Company Address :
Technical skills for Stress analysis :

** Stress, strain and elasticity.
** Theories of failure.
** Loads and load combination
** Stress on pipes, allowable stress.
** Support selection.
** Stress analysis using piping software.
** Piping insulation

Piping design calculation :
** Preparation of pipe thickness, size, pressure drop & reinforcement calculation.
** WRC 107/297 calculation
** Safety valve blowing and reaction calculation.


Support equipment :
** Pipe standards shoe, guide, stop, rigid, hanger.
** Spring support VLC,CLH & support span calculation

Material specification :
** Selection of material as per codes & standards
** Piping material specification for carbon alloy & stainless steel

[sin10593]

Dear Sir
Plz. find the attached resume ...

JASBIR SINGH

H.No. 98/3 Sita-Ram colony, Haily Mandi, Pataudi, Gurgaon, Haryana 123504
Phone no: 09313383800, Email: jassisametime AT gmail.com

PIPING ENGINEER
A dynamic spirited and performance driven professional with blend of leadership and industrial knowledge. Ability to communicate and motivate team members to achieve bottom line objective. Solid background in design layout, planning & control in Oil and Gas.

Total experience : 5 yrs
Detail engineering activites :
- Handling Piping Package like Column, Exchangers, Pumps, Filter, Air Cooler, Pipe-rack ,drums.
- Piping Layout and isometric extraction of jacketed piping
- Tie-in sketches verification against the existing plant using LFM.
- Isometric Extraction and GA preparation using Drawing Manager.
- Worked as Designer on Pipe-Rack for the Project.
- Utility station, Eye-Wash, and seal pot for pump piping.
- Steam tracing manifold layout and steam tracing isometric preparation.
- L&P and vessel clits drawings preparation.

PROFESSIONAL EXPERIENCE
SK E&C, Gurgaon Dec 2009-Present

PROJECT: Booster station BS-132 – KOC
Contribution
- Lead a team of members for technical support and guidance about client standards.
- Responsible for overall piping layout of flare area
- Reviewing and monitoring the modeling of piping and equipments.
- Co-ordination with various discipline like structural, control system, electrical.

PROJECT: NSRP-Vietnam (Proposal)
Contribution
- Routing study for the estimation purpose for cooling water unit
- Preparation of the MTO sketches
- Preparation of mto list.


Fluor Daniel, Gurgaon Jul 2005-Dec 2009

PROJECT: TOTAL DEEP CONVERSION PROJECT-Port Arthur
Contribution
- Worked as Area Lead for DHT Unit.
- Lead a team of members for technical support and guidance about client standards.
- Responsible for overall piping layout.
- Reviewing and monitoring the modeling of piping and equipments.
- Co-ordination with various disciplines like structural, control system, electrical.
- Self checking and trouble shooting in isometric extraction.
- Squad-Check of vendor drawings / structural drawings/ data sheets for instruments.
- Handling Piping Package like Column, Exchngers, Pumps, Filter, Air Cooler, Pipe-rack, Drums.
- L&P and vessel clits drawings preparation.
- Steam tracing manifold layout and steam tracing isometric preparation.




PROJECT: TANECO-Russia
Contribution
- Worked as Senior Designer for the Jacketed Piping in all units of the project.
- Layout and isometric extraction of jacketed piping.
- Piping Layout for Column, Exchangers, and Pumps.
- Utility station, Eye-Wash, and seal pot for pump piping.

PROJECT: MARATHON PETROLEUM –Texas
Contribution
- Worked as Senior Designer for CDU unit.
- Handling Piping Package like Column, Exchangers, Pumps, Filters.
- Engineering coordination with various others disciplines.

PROJECT: SUNOCO – Toledo
Contribution
- Worked as Designer on Pipe-Rack for the Project.
- Battery-Limit Planning/Rack loading for structural.
- Preparation of MPS memos for Civil.
- Tie-in sketches verification against the existing plant using LFM.
- Isometric Extraction and GA preparation using Drawing Manager.
- Steam Tracing Iso Preparation and Steam /Condensate manifold.
- Layout of Jacketed piping in Pipe-Rack.

Technically skilled in the following software’s
PDS-3D
AutoCAD
Micro station
Smart Plant-2D
Smart Plant review
Smart Sketch

ACADEMIC RECORDS:
Qualification:

I. Pursuing MBA in marketing from Symbiosis Institute-Pune.
II. AMIE (Mechanical Engineering)-Kolkatta.
III. Diploma in Mechanical Engineering from Pusa Polytechnic-New Delhi.
IV. 12th from Army Public School- New Delhi.

[prateekarmo]

PRATEEK ARMO
E-Mail: prateekarmo AT gmail.com Mobile: +91 9015375167

Seeking engineering assignments in Designing & Construction of Piping Systems with a reputed organisation in the Heavy Machinery / Oil & Gas sector


SYNOPSIS
- Post Graduate in Piping Engineering & Technology and Mechanical Engineering Graduate with sound understanding of Designing, Engineering, Construction and Testing of Piping System for Chemical Process Plant, Power Station, Refineries, Petrochemicals & Fertilizers Plants, Food & Pharmaceutical Industries, etc.
- Acquired practical exposure to concepts of Mechanical Engineering through academic projects on Study & Modification in Four Wheel Steering System and Design of Crankshaft for Complete Balancing of Primary Unbalance Force in Reciprocating Engine.
- Have successfully undergone 15 days’ Vocational Training with Chhattisgarh State Electricity Board and gained an insight into the actual process & elements of Power Plant.
- An effective communicator with sound interpersonal & analytical skills and abilities in handling multiple priorities.

PROFESSIONAL QUALIFICATION
- Post Graduate Diploma in Piping Engineering & Technology from Elixir Institute of Piping Engineering and Technology, Pune in 2010.

SCHOLASTICS:
- B.E. (Mechanical) from Chhatrapati Shivaji Institute of Technology, Durg (CG), (Affiliated to Pt. Ravishankar University, Raipur) in 2008. Secured 69.9%.
- XII from School, Raipur, CG Board in 2003. Secured 55%.
- X from School, Bhopal, MP Board in 2001. Secured 64%.

KNOWLEDGE PURVIEW
- Piping System Design in ASME B31.3
- Applicable ASME Codes for Piping System
- Stress Analysis
- Material Selection for Construction
- Testing of Piping System
- Plant Layout
- Development of Plot Plan
- Generation of BOM / MTO through Isometric Drawing Software System

IT SKILLS
- Operating System : MS-DOS, Windows 98/XP
- Programming Languages : C, C++
- Packages : MS Office (2000/XP/98/Vista)
- CAD Software : CAESAR II 5.1, PDMS 11.5, AutoCAD

ACADEMIC PROJECTS
Study and Modification in Four Wheel Steering System
Team Size: 4 Role: Data Collector
Key Learning:
- Better stability during overtaking manoeuvres.
- Reduction of Vehicle Oscillation around its Vertical Axis.
- Improvement of Active Safety:
- Decreased Sensibility to Lateral Wind
- Neutral Behaviour during cornering, etc.

Design of Crankshaft for Complete Balancing of Primary Unbalance Force in Reciprocating Engine
- Team Size: 5 Role: Team Leader
- Key Learning:
- Primary unbalanced force is completely balanced hence no vibration is produced.
- No imbalance couple arises due to new balancing masses.
- Hammer blow & swaying couple are completely removed.

VOCATIONAL TRAINING:
- Organisation: Chhattisgarh State Electricity Board, Korba (C.G)
- Duration: 15 Days
- Key Learning:
- Gained knowledge about the actual process & elements of Power Plant.
- Calculating loss & efficiency of Turbines, Compressors, Nozzles, Piping, etc.

PERSONAL DOSSIER:
Date of Birth : 24th Jan 1985
Address : House No -1c/2b, 3rd floor, Room No.-11, Jiasarai,
Near IIT Delhi, Hauz Khas, New Delhi-110016
Languages Known : English and Hindi

[Guest]

Sub : Application for position of Piping stress analyst.
Dear Sir/mam,
Please find my attached resume highlighting my credentials for your kind consideration.
I am an Engineer graduate in Chemical, backed by good technical skills &possess 5 years & 5 months hands on experience in reputed organizations with excellent exposure help me to be an efficient professional.
PresentlyI am employed with Reliance Industries Limited, (Engineering Division), Mumbai, one of the leading group in EPC
The professional environment filled with challenges and opportunities at your reputed organization suites to my carrier goals. I believe that association with you will give me better chance to efficiently utilize my skills.
I would appreciate the opportunity to further discuss this potential with you and look forward to meet you. Thanks for your kind perusal.
SYED MUDDSSAR

Objective :-
To acquire a position of piping stress engineer with an EPC organization that provides me the opportunity to make strong contribution to organizational goals through continued development of professional skills.
Work Experience :-
- Total working experience of 5 years & 5 months as a Stress Analysis Engineer (Piping)
Familiar with :-
- Critical Line List preparation & system formation from P&ID.
- Modeling & static analysis of lines connected to equipment likePumps, Air fan coolers, Heat exchangers, Turbine; Knock out Drums, Storage tanks, using CAESAR-II (Ver-4.4, 4.5, 5.0).
- Detailed engineering of lines running on Pipe rack & sleepers
- Support type selection & Preparation, Preparation of Special Supports.
- Support selection for small bore (< 3”) high temp line without computer analysis.
- Static equivalent wind & seismic analysis
- Preparation & Evaluation of spring data sheets.
- Checking of ISO's as per stress analysis/ support design
- Preparation and issue of piping loads to Civil.
- Stress analysis of aboveground GRP lines.
- Supporting of lines as per availability of structure (data from SPR) and getting the best possible optimum solution for minimum stresses in piping system and loads on the structure.
- Familiar with international codes such as API 610, API 617, API 650, NEMA-SM 23, ASME B 31.3, etc.
- Document management and data sharing with different departments in the project taskforce.
- Assistance at site during construction phase.
- Assistance to Plant Operations for mitigating the vibration in the operating lines.
Work history :-
A] Reliance Ports & Terminal Private Limited, Mumbai (Formerly a joint venture between Bechtel & Reliance)
Project : - 1) Reliance Jamnagar export refinery project.
2) Butene-1, Hazira, Gujrat
3) A-1 Jetty Expansion Project.
Duration : - 16 August 2007 to till date.
Job Profile : - Assigned as a piping stress analysis engineer reporting to lead piping stress engineer.
Job Responsibility : -
1) Worked as an area lead stress engineer for the Refinery & Marine Tank Farm.
2) Responsibilities included meeting all quality, scope of work, schedule requirement particularly as it applies to Piping stress Engg.
3) Analyzed lines connected to Pumps, Exchangers, and Turbine, Air-Fin fan Coolers, Reactor, Vessels, and Storage Tanks etc.
4) Loading calculations of piping systems on Pipe racks, Various Structures, etc and providing load inputs to civil.
5) Review Study drawing to ensure sufficient flexibility in critical piping.
6) Preparation of spring data sheets.
7) Supporting for small bore Connections.
8) Man Power management of two trainee engineers.
9) Worked at site independently to resolve the site related issues such as vibrations in operating lines, routine change, design change, etc.
B] Flexitech Consultants, Mumbai.
Projects handled - 1) SPC, Saudi Arabia.
2) Melka refinery MG3 project, Malaysia
Duration : - May 2006 to August 2007
Job Profile : - Piping Stress Analysis Engineer.
Responsibility : -
1) Static analysis of pump suction & discharge lines, heat exchanger lines considering all the conditions.
2) Preparing data sheet of spring supports.
Educational Qualifications :-
Bachelor of Engineering (Chemical)
Graduated in Chemical engineering from the Aurangabad University in May 2006
Computer skills :-
- Well versed with Software soft wares like CAESAR-II Ver 4.4, 4.5 & 5.0 & SMART PLANT REVIEW.
- Well versed with MS-Office.

[abhijithazarika15]

ABHIJIT HAZARIKA
E-mail : abhijit.hazarika AT essar.com
abhijithazarika15 AT gmail.com
abhijithazarika15 AT rediffmail.com
Career Objective :
To achieve excellence in my field of work through dedication, leadership and teamwork in an organization having ample scope for career enhancement and professional, personal growth.
Academics : B.E. (Chemical Engineering) in 2006
Govt. Engineering College, Gauhati University of Guwahati, Assam.
10 +2 in 2002 from NL College, Assam
10 + in 2000 from NLGHSS, Assam

Total Industrial Experience : More than 6 years Oil, Gas & Fertilizers
industry.
Summary of Experience :
I have more than six years of experience in Refining & Fertilizer Industry.
Personal Strengths :
- Extensive implementation knowledge in Planning/ Preparation and Execution of processes. Knowledge to Define, Recommend and Implement new process strategies for plant reliability, efficiency and safety including trouble-shooting.
- Skilled experience in unit operations of Reformer, Absorber, Reactors, Stripper, Cooling Tower, Heat Exchangers, High-speed Turbines, High-pressure Pumps, sulphur burner, chemetics cooler, prayon filter and compressors.
- Ability to plan, organizes, and prioritizes work to meet on time the deadlines.
- Adept at analyzing / interpreting problems, with a combination of experience and logical thinking.
- A versatile communicator par excellence possessing good interpersonal skills with the ability to work under pressures and deadlines
- Posses intellectual, analytical and creative ability to learn quickly, identify issues, make judgements and propose solutions.
- Plenty of enthusiasm, resilience and confidence – I can be someone who can always get things done
- Posses the character and ability to work effectively with others in a diverse team
- Understanding and approaching technical issues coupled with an enthusiasm for technical challenge.

Organizations Worked with :
1. SM Consultants
Company Profile
S M CONSULTANTS Limited a govt approved laboratory for material testing & registered consultants for architecture , engineering, environment work & testing.
Position : Graduate Engineer Trainee
Period : Dec’06 to Oct’07
Job Profile in Tata Chemicals Limited :
Project Title : Process Management in sulfuric & phosphoric acids plant
2. TATA CHEMICALS LIMITED(HALDIA UNIT)
Company Profile
Tata Chemicals Limited is India's leading manufacturer of inorganic chemicals. It also manufactures fertilizers and food additives. Incorporated in 1939, the company has an annual turnover of over Rs 5,800 crore and is part of the $ 62.5 billion Tata Group, India's foremost business conglomerate
Position : Graduate Engineer Trainee
Period : Jul’06 to Dec’06
Job Profile in S M CONSULTANT : Trainee Engineer
Project Title : Testing of all types of soil & material testing

3. Brahmaputra Valley Fertilizer Corporation Limited
(A Govt. of India undertaking)
Namrup- 786623, Assam.
Position : Asst. Engineer
Period : October 2007 to August 2010
Job Profile in Brahmaputra Valley Fertilizer Corporation Limited :
Project Title : Process Management in Ammonia & Urea Plant (Natural Gas based)
Period : October 2007 till August 2010.
Role : Asst. Engineer
Company Profile :
Brahmaputra Valley Fertilizer Corporation Ltd. (A Govt. of India Undertaking) earlier a unit of Hindustan Fertilizer Corporation Ltd. is the only fertilizer company located in the North-East India. With a capacity of producing 5.5 Lacs MT of Urea Fertilizer from Natural Gas, the company uses state of art technologies of M/s Haldor Topsoe, M/s Snamprogetti, M/s PDIL and M/s Monte Edition. Its product ‘Mukta Urea’ is one of the best brands of Nitrogenous Fertilizers, widely marketed in East and South India.
Responsibilities :
- Continuous monitoring and control of Process Parameters which
Includes : temperature (-180ºC to 1000ºC), pressure (0.14kg/cm² to 200kg/cm²), flow, concentration, level and quality of finished product through DCS (YBL-CS3000) system .
- Operation of high speed and high capacity machineries including steam turbine, multistage centrifugal and reciprocating compressors, centrifugal and reciprocating pumps.
- Operation of Reactors, Absorbers, Distillation Column, Stripper, Cooling Tower, Heat Exchangers, Evaporator etc.
- Conversant with various types of catalyst used in fertilizer industry and their characteristics.
- Distribution of jobs to the operators, reporting & coordinating with the higher officials(Plant manager and above) and close coordination with the various maintenance departments, Mechanical, Electrical and Instrument.
4. Essar oil Limited, Jamnagar
Vadinar-361006, Gujarat.
Job Profile in Essar oil Limited, Jamnagar :
Presently I am working with M/S. ESSAR OIL LIMITED, Refinery division at Jamnagar in Delayed Coker Unit since last two years.
Period: August 2010 till date.
Position: Dy. Manager (Panel officer)
Company Profile:
ESSAR OIL LTD. Jamnagar Operates a fully integrated oil refinery of international size and scale in India. Its assets include developmental rights in proven exploration blocks, a 14.0 MTPA refinery in the west coast of India.
Responsibilities:
DCU (At erection and commissioning phase)
- P & ID marked up for built up of DCS graphics.
- DCS graphics review.
- Checking of cause and effect diagram and ESDs.
- Alarms prioritization of DCU.
- Review of SOP’S and P&ID’S and plant operating manual
- Factory Acceptance Test of Delayed Coker Unit has been done in YOKOGAWA INDIA LIMITED.
1. DCS(close loop, cascade loop, complex loop) logic checkingESD
2. ESD logic checking.
3. HEATER BMS logic checking.
4. Heat duty controller logic checking.
5. Pass flow balancing logic checking.
- GA drawings review.
- Checking of isometrics of lines as per latest P& ID.
- Hydrotest and flushing loops preparation of lines.
- Mechanical clearance of the lines, vessels and other equipments.
- Final boxed up of lines, vessels and other equipments after mechanical clearance.
- Flushing of new erected lines like card board blasting, pigging and rotomole flushing.
- HEATER BMS, dry out procedure.
- Compressor turbine solo run & compressor load trial
- Logic checking of all types of packages associated with coke drum.
- 3-D model review of DCU.
Area of Excellence :
- FAT(Factory Acceptance Test) of ESD/DCS for Delayed Coker unit has been conducted in YOKOGAWA INDIA LIMITED at Banglore.
- First Aid certified training in Essar Oil Ltd.
- Two weeks training program at IOCL Panipat on Delayed coker unit.
- One week training program on “Advance Refinary Technology” at IIP-Deharadun.
- DCS training by YOKOGAWA.
- OSEMP training in Essar Oil Ltd.
- Licensor training on DCU by CB&I experts.
- Training on DCU by well known expert faculty Dr.Goyal
- 1 month Certified training on HSE in Essar Oil Ltd.
- Certified training on Basic Programmable Logic Controller.
Professional Training Experience:
Bangaigaon Refinery and Petrochemicals Limited, Bangaigaon, Assam.
(A group company of Indian oil)
Contents: The objective of the training session was to get the conceptual and
technical overview/ framework of the different refinery processes
Exist in modern refinery systems.
Computer Skills:
Exposure to SAP, O.S: Win9x family, Windows NT, Windows XP, C programming.
Ms Office.
Current CTC:
7 lacs only.
Expected CTC:
Open for negotiation based on company profile.
I hereby assure the authenticity of the above content

(Abhijit Hazarika)
Dated:15-March-12