PDS Piping Designer : UAE

[Admin]

Confidential UAE : Piping Designer (PDS)
Company Name: Confidential
Company Location: UAE
Designation of the vacancy: Piping Designer (PDS)
Company E-mail for contact: dkxsharma@rediffmail.com
Company Website: Confidential

Details of the job:
The candidates should have Min 12 to 15 years of working exp. in the field of Oil /GAS/Refinery projects with reputed consultants i.e Linde, Bechtel, Fluor, Jacob, Tecnimont, L&T, EIL etc. Also should have strong software skills background i.e PDS-3D modules, Intools (For E&I Designer), Smart Plant PID (Additipnal advantages), Microstation (Must be Strong)etc.
The Position is Permanent, Family status & Nice package & perks in UAE base.
Intrested candidates only can contact via email.

[Guest-IJT]

Name : Subhash Jadhav
Email : sbjdraft AT rediffmail.com
Designation / Skillset : Pdms Pds Piping Designer
Dear Sir
Good Morning,
I am looking for Job change Pl. Find Attached My CV
Presently I am working in Oman, Worley Parsons Oman Engineering LLC. As a Pdms_Pds Piping Designer, if you have Suitable Position Requirement. Pl. Reply Same
Have a nice day
Thanking you,
Subhash B. Jadhav.
Piping Designer
WorleyParsons Oman Engineering LLC.

Resume :

CAREER OBJECTIVE :
To serve the organization with my technical and managerial abilities in Engineering to develop career as an Eminent Designer.
Educational Qualification
Industrial Training Institute (Satara, Maharashtra) completed at September 2001
Diploma in Mechanical Engineering. (Rajasthan University)completed at July 2006 Diploma Piping Design & Drafting. (Suvidhya institute Of Technologies Mumbai)
Experience
- Working as a Piping Designer in WorleyParsons Oman Engineering L.L.C In Oman from March 2010 to Till date
- Working as a Piping Designer in Saipem Triune Engineering Pvt Ltd. In Delhi from Aug 2008 to March 2010
- Working as a Piping Designer in Larsen & Toubro Ltd. In Delhi from
July 2007 to Aug 2008
- Working as a PDMS Designer in Sidvin Core-Tech (I) Pvt. Ltd. In Bangalore from Aug 2005 to July 2007
- Worked as a PDMS Designer in Uhde India Limited, Mumbai
Sept 2001 to Aug 2005
- Total No. of Years Experience : 10 + years (Sept.2001 to Till date)
SUMMARY OF EXPERIENCE
Ten + years strong Experience in Design and modeling of piping systems Refinery, Petrochemical, OIL & GAS Industries in global projects. Strong Experience in Aveva Plant Design Management PDMS & MDS 12.0sp4, Intergraph Plant Design System (PDS) 3D Software. 7.3 & system
To have a Challenging Carrier in Piping Design Layout with Multi Tasking Capabilities
Software Skills :
- I am proficient in working on PDMS 11.4, 11.5, 11.6, 12.0.SP4.
- PDMS - MDS (Multi Discipline Support) Tool 12.0.SP4.
- I am proficient in working on PDS V7.3.
- I am proficient in AutoCAD Latest Version.
- Plant review using Navis Works.
- M.S Word & MS Excel
WORLEYPARSONS OMAN ENGINEERING L.L.C (Oman)
-
PIPING DESIGNER { PDMS }
Involved in projects :
1) AMAL STEAM SURFACE FACILITIES PROJECT (Petroleum Development Oman)
RESPONSIBILITIES :-
- Working on Area : Water Treatment, Filtration, Backwash, Chemical Injection, Salt handling.
- Preliminary study for Water Treatment Plant Area.
- Fixed Equipment Locations, Pipe Routing Based on Plot plan & Similarly Discuss with Civil, Stress, Electrical, and Mechanical Departments.
- Pipe Rack width Input Given o civil.
- Refer Vendor Drawing’s for Orientation, Size & other Details.
- Pipe Supports for Large Bore & Small Bore Pipes According to Stress Input and PDO Support Std.
- Pipe Supports Modeled Using PDMS MDS (Multi Discipline Support) Tools.
- Pipe Rack Supporting done as per Pipe Support Span Std. & also Stress input.
- Critical Lines Routing as per Stress Requirement.
- Vessel Trim Modeled According to Instrument Hook-ups.
- In line Instruments Modeled According to Instrument Hook-ups.
- Underground Piping Modeled with Different Material & Services
- 60% & 90% Model Review Comments are Incorporated.
- Isometric Issued with Clash check & Consistency Check report.
- Pump Shed, Vendor Skids Drawings are reviewed & checked, Layout Point of View.
- Preliminary Locations Provided to Civil for Culverts, Curb Wall, Sump pit, Pipe Sleeve, Civil Trench & Valve pit wherever required.
- Different type of Equipments are Modeled in PDMS based on Vendor Drawing.
- General Arrangement Drawing Extracted From PDMS Draft Module.
- Pump Suction Elevations are Fixed base on Equipment Levels, LLLL, LALL,
- Special Piping Component Holds are removed and Isometric issued for Construction.
- Preliminary Mto & Preliminary Piping Study
SAIPEM TRIUNE ENGINEERING PVT. LTD.(Delhi)
-
PIPING DESIGNER {PDMS,PDS}
COMPANY PROFILE : Detail Engineering Company involved all type of Projects using design tools PDMS, PDS
Client : Kuwait Oil Company
Consultant : Safwan Petroleum Technologies Company
2). Project : KOC (SAFWAN Petroleum Technologies Company W.L.L)
Conceptualization and 3D Modeling of Equipments and Piping for Three Stage Gas Compression area, GCP, GC-28, TV, equipments with respect to P&ID and considering . Raising the query to other Discipline with relative the Piping requirement. Civil Input Requirement Such as Pipe rack, Platform, Cross over bridge, Staircase, Foundation of the Equipments
RESPONSIBILITIES :-
- Checking Isometrics According to PMS, P&ID & Study Drawing.
- Preparation of Equipment Foundation, Platforms & Structure.
- Close Isometric Drawing Client Review Comments & Reissued Lines.
- Preparation of Equipment Layout in Autocad & Pdms
- Modification in existing Plant Area’s GCP, GC-28, GC-16
- Fixed Nozzle Orientation of Equipments.
- Routing of Pipelines in as per P&ID & Plant Excess.
- Preparation pipe rack issued to Civil Dept.
- Material Take Off (M.T.O.) According to P&ID
- Place the valve Operators & Envelops, Culverts, show Access of Valves, PSV, PCV
2). Project : CPCL (CHENNAI PETROLEUM CORPORATION LTD. Chennai) NHT/ISOM UNIT
- Provide high & low point Vent & drains.
- Concern with Electrical Dept. & Instrument Dept. for Clashing with Cable tray & Inst. Boxes
- Orientation, Location of Manhole & Manhole Opening In column, Vessel, Reactor Etc.
- Support Marking According to Stress Dept. Input
- Preparation of Hose Station, Sample Connection
- Preparations of Steam supply manifold Assembly.
- Modelling of PSV. Arrangement, Control Station Arrangement.
- Finalized Pump location, Pump Piping.
- For Critical Lines Routing Concern with Stress Dept. & Structural Dept.
- Isometric Valve Access, Walkway Distance
- Participate Internal Design Review (IDR), Internal Discipline Coordinate (IDC).
3). ONGC 10” KJ#3 – RAMNAD GAS PIPILINE PROJECT (Chennai)
(OIL AND NATURAL GAS CORPORATION OF INDIA LTD. Chennai)
- New Launcher, Receiver & Manifold Assembly Added in Existing Facilities
- Piping General Arrangement Drawing KJ#3 Well Head
- According to Existing site Information Study Layout fixed Launcher Receiver & Manifold Locations
- All Piping study & Pipe Isometrics with shown Piping Support
- Match Piping with Existing Facilities & Pipe rack
- Team Work, Cooperation With Piping Lead, Project Manager, Checker
- Attend Training Program for PCA (Prepare Check & Approved)
LARSEN & TOUBRO LIMITED (Delhi)
-
PIPING DESIGNER {PDMS, PDS}
COMPANY PROFILE : Detail Engineering Company involved all type of Projects using design tools PDMS, PDS
Involved Project : CAIRN ENERGY PROJECT
Conceptualization and 3D Modeling of Equipments and Piping for Export Oil storage tanks, Gas Processing area, Flare/Diesel Storage/Utility area. Pipe routings are done for above equipments with respect to P&ID and considering CED changes. Raising the query to other Discipline with relative the Piping requirement. Civil Input Requirement Such as Pipe rack, Platform, Cross over bridge, Staircase, Foundation of the Equipments &
(Rajasthan Northern Area Development Project Facility)
RESPONSIBILITIES :-
- Preparation of Equipment Modeling and Package Units.
- Nozzle Orientation of Equipments.
- Piping routing PDS as per P&ID
- Preparation of Equipment Layout.
- Preparation pipe rack issued to Civil Dept.
- Material Take Off (M.T.O.) According to P&ID
- Place the valve Operators & Envelops, show Access of Valves and Overall Plot Plan.
SIDVIN CORE-TECH (I) PVT LTD. (Bangalore)
-
PIPING DESIGNER { PDMS }
Profile :
SIDVIN — A customer focused Engineering Service provider for Offshore Oil & Gas, Petrochemical & Process Industry has been delivering exacting solutions through its innovative, unleashing methodologies, Present globalization and privatization are forcing industries to maintain profitability in each stage of the lifecycle for any Offshore oil & gas / process industry and as such the projects are required to be completed quicker.
RESPONSIBILITIES :-
- Preparation of Equipment Modeling in PDMS.
- Piping Routing as per P&ID and Supporting.
- Plant Development Piping as per International Codes.
- Preparation of General Arrangement Drawings.
- Preparation of Equipment Layout in PDMS Draft Module.
- Preparation of Piping plot Plan.
- Nozzle Orientation of Equipments.
- Clash Checking.
- Extract pipe supports From Draft Module.
- Checking Piping Isometric According to P&ID & Modify.
Involved in Offshore projects :
2) GUSTOMSC-INC HOUSTON, TEXAS –DELBA DRILLING TDS – 2500 (SBM Offshore)
It is a semi submersible dynamically balanced drilling rig belongs to DELBA III (Delba Drilling international co-operation U.A) I had played the vital role in this project
3) FPSO ESPIRITO SANTO TAMBA BY-BC 10 FIELD (Brazilian deepwater floating terminals Offshore SBM Inc.) It is a FPSO ship, belongs to CHEVRON, which is now converting for extracts the petroleum products from sea crust.
4) Onshore - CRISTAL PIGMENT PLANT (THE NATIONAL TITANIUM DIOXIDE COMPANY SAUDI ARABIA)
UHDE INDIA LIMITED (Mumbai)
-
PDMS DESIGNER {PDMS}
Profile :
Our 400 plus contracts for some of the leading chemical majors in India and abroad and our credentials as a pre-eminent subsidiary of an internationally - renowned group are amongst the reasons for us being considered the preferred partner for chemical projects. Specializing in engineering design of oil & gas, chemical plants.
RESPONSIBILITIES :-
Involved in projects :
- INDIAN OIL CORPORATION LIMITED.
- NIRMA CAUSTIC SODA PROJECT.
- Issuing the Iso`s to Stress Analysis Preliminary MTO,
Updating of Client Model Review tags (30%, 60%&90%) updating of Interference
Clash report
- Preparation of Equipment Modeling in PDMS.
- Routing of Pipelines in PDMS as per P&ID and Supporting of Pipelines.
- Plant Development Piping as per International Codes, like OISD.
- Preparation of General Arrangement Drawings.
- Preparation of Equipment Layout in PDMS Draft Module.
- Preparation of Piping Plan.
- Nozzle Orientation of Equipments.
- Clash Checking, reports, Data Connection Report.
- Preparation of Line List and Valve List.
- Preparation of the As Built Drawings
- Place the valve Operators & Envelops, in over all plot plan
- Checking Piping Isometric According to P&ID & Modify
- Preparation of Detail Fabrication Drawings with Bill of Material for all types of Steel Storage Tank, Low Pressure Tanks, Pressure Vessel, Heat Exchanger,
- Preparation of the GA drawings for refinery equipment

1. Current Work Industry : WorleyParsons Oman Engineering L.L.C
2. Current Project : AMAL STEAM SURFACE FACILITIES PROJECT PDO Oman
3. Current Work Location : Oman (Muscat)
4. Current Work Profile : Piping designer (PDMS, PDS)
5. Permanent Residence : Mumbai
6. Time Required Joining : 45 Days (1.5 month)
7. Total Work Experience : 10+ years
Declaration
I hereby declare that the above-furnished details are correct to the best of my knowledge and belief.
Signature
Date: 01.05.2011
(Subhash B.Jadhav)
-------------------------------------------------------
More Information about this submission and submitter:-
___________________________________________________
Submission ID : 4153206
Date & Time : 19th May 2011 8:30 PM (UTC)
IP Address : 188.135.93.239
Browser Info : Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; InfoPath.3; .NET4.0C; BRI/2)
Predicted Country : --

[Guest]

Nominated Position : Sr. PIPING DESIGNER

E-mail ID. : ykt_1977 AT yahoo.com
ykt_1977 AT rediffmail.com

Academic Qualification
- I.T.I in Mechanical Draughtsmanship from Pusa Institute, Delhi.
- B.COM (P) from Delhi University through School of Correspondence Courses, Delhi.
Software Proficiency
- PDS – 3D Modeling
Piping Designer, Equipment Modeling, Drawing Manager, Isometric Extraction.
- Smart Plant Review
- Microstation
- AutoCAD
- MS – Office
- 14 (Fourteen) years experience in detail engineering for Oil & gas, Petrochemicals, Refineries.
Major Projects Involved :
- IOCL Paradip Refinery Project, Paradip Orissa State, India.
- BS-132 Project Kuwait.
- Cilacap Project Indonesia.
- Gladstone LNG Pty Ltd., Australia.
- Detailed Engineering of DHDT Expansion Project Vadinar, India, for ESSAR OIL REFINERY.
- Detailed Engineering of Ras Laffan Olefin Project. , State of Qatar.
- Detailed Engineering of Onshore Processing Terminal at A.P Coast, India, for Clough Engg. Ltd., Australia.
- Hydrogen Plant for Low Sulphur Diesel Production Unit at BAPCO Refinery, Bahrain.
- Hydrogen Reformer at Sohar Refinery, Sohar Oman, for M/s JGC, Japan.
- Petrox Hydrogen Plant in Chile (Reformer & Convection Section Piping) for TP-USA .
- Hydrogen Plant for ORYX GTL Project, Ras Lafan Qatar.
- M/s Home Style Industries, at Moradabad, U.P, India.
- M/s Pepsi Foods Ltd.
- M/s Daurala Organics Ltd., Meerut, U.P India.
- M/s Suraj Polymers (Pvt) Ltd., Delhi
Areas of Competence / Experience
- Piping and Equipment Modeling on PDS.
- Equipment Layout Drawings.
- Piping General Arrangement Drawings.
- Nozzle Orientation Drawings.
- Piping Support & Piping Isometric Drawings with BOQ.
- Drainage and Sewage Piping Layout Drawings.
- G.A. and Detail Drawings of Equipments.
Career Profile
Aug. 2010 Onwards : Working in IOCL Paradip Refinery Project, Paradip at Orissa, India. I am responsible for the Activities involved in making Piping Studies, Equipment layout drawings, Piping & Equipment Modeling on PDS.
Jan 2010 to Aug. 2010 : Worked on New Booster station BS-132 Project Kuwait.
I was responsible for the Activities involved in making Piping Studies, Equipment layout drawings, Piping & Equipment Modeling on PDS.
June 2009 to Dec. 2009 : Worked on Cilacap Project Indonesia. I was responsible for the Activities involved in making Piping Studies, Equipment layout drawings.
Aug. 2008 to May 2009 : Worked on Gladstone LNG Feed Project a part of Gladstone Queensland, Australia. I was responsible for making Piping Studies, Equipment layout drawings etc.
Jan 2008 to Aug. 2008 : Worked on detailed Engineering for DHDT EXPANSION PROJECT VADINAR, for ESSAR OIL REFINERY. I was responsible for the Compressor Area. Activities involved were making Piping Studies, Equipment and Piping Modeling on PDS.
March 2006 to Dec. 2007 : Worked on Detailed Engg. for RAS LAFFAN OLEFIN PROJECT (STATE OF QATAR). I was responsible for the OSBL area. I was responsible for making Piping Studies, Equipment and Piping Modeling on PDS.
Sep. 2005 to Feb 2006 : Deputation to Technip Paris
Worked in Technip Paris during Sep 05 to Feb. 06 for the Ras Laffan Olefin Project Where I was responsible for the OSBL area. Activities involved were making Piping Studies, Equipment and Piping Modeling on PDS.
Jan. 2005 to Sep. 2005 : Preparation of Piping Studies, Equipment Layout Drawings, Equipment and piping Modeling on PDS for Detailed Engineering of Onshore Processing Terminal at A.P Coast, India, for Clough Engg. Ltd., Australia
Dec 2003 to Dec. 2004 :
Preparation of Piping Studies, Equipment Layout Drawings, Equipment and piping Modeling on PDS for Hydrogen Plant for Low Sulphur Diesel Production Unit at BAPCO Refinery, Bahrain.
- Preparation of Piping Studies, Equipment Layout Drawings, Equipment and piping Modeling on PDS for Hydrogen Reformer for Sohar Refinery at Sohar, for our Client M/s JGC, Japan.
- Preparation, Equipment and Piping General Arrangement drawings, Piping Isometric drawings and Piping support Drawing for Petrox Hydrogen Plant in Chile (Reformer & Convection Section Piping) for TP-USA Job.
- Preparation of Piping General Arrangement drawings, Piping Isometrics for Hydrogen Plant for ORYX GTL Project, Ras Lafan Qatar.
May. 2001 to May. 2003 : Preparation of Piping general arrangement drawings for Drainage and Sewage System of tunnel and Underground Stations for DMRC PROJECT (Delhi Metro Rail Corp.) under International Metro Civil Contractor.
July 1999 to Jan. 2001 : Preparation of Equipment and Piping General Arrangement drawings, Piping Isometric.
- M/s Home Style Industries, at Moradabad, U.P
- M/s Pepsi Foods Ltd.
- M/s Daurala Organics Ltd. At Meerut, U.P
- M/s Suraj Polymers (Pvt) Ltd. At Delhi.
Aug 1997 to Jun. 1999 : Preparation – G.A for Fabrication, Press Shop, and Component Dwg.
Employment History
- Since Aug. 2010 : Foster Wheeler India Pvt. Ltd, Gurgaon (India)
- June 2009 to July 2010 : SK Engineering & Construction, Gurgaon (India)
- Aug. 2008 to May 2009 : SK Engineering & Construction, Seoul (South Korea)
- Dec. 2003 to Aug. 2008 : Technip KT India Ltd, Noida (India)
- Feb 2001 to Nov. 2003 : Dalal Mott MacDonald India Pvt. Ltd., Noida (India)
- July 1999 to Jan. 2001 : M/s VCD Engineers & Consultants, Delhi (India)
- Aug 1997 to Jun. 1999 : M/s Asiatic Electronics Industries, Delhi (India)