NDT LEVEL II, UT technician : Resume CV

[Guest]

BIODATA :
Name - Onkar Singh Bains
E Mail Address- soddi72 AT gmail.com

OBJECTIVE :
- To work in a reputed professional organization where my sound knowledge, and academic qualification will be fully utilized to my maximum potential.

PROFILE :
- An Science Post Graduate, MSc (Maths), with successful completion of ASNT Level II (PT, MPT, RT Interpretation, UT) from reputed BIT (Bhide’s Institute, Mumbai)
- Additional technical qualification as fitter (one year course from ITI Bhopal)
- Motivating subordinates by personnel example.
- Capable of carrying out of managing and supervisor.

QUALIFICATION :
Exam passed Year Institute Subject % :
Bsc (Maths) Three years Regular 1995 Barkatullah University English, Hindi, Physics, Statistics, Maths 51
Msc (Maths) Two years Private 2002 Barkatullah University Maths 53
ITI (Fitter) One year Regular 1999 MHK, Bhopal ITI Fitter 68

AREA OF EMPLOYABILITY :
Capable of carrying out supervisor duties as a NDT Inspector, Site-in-Charge, Site Co-ordiator.

EXPERIENCE IN NDT FIELD :
One year experience in RT Opearation at NPCIL, Kaiga, Karnataka
Presently working as a UT technician (Under Russian Code) at Kudankulam Nuclear Power Project on contract basis.

PERSONAL PROFILE :
- Date of Birth - 24 Feb 1972
- Martial Status - Married
- Nationality - Indian
- Religion - Sikh
- Languages Known - Hindi, English, Punjabi,

DECLARATION :
I solemnly confirm that the above-furnished information are true, correct and best of my knowledge and can be supported by relevant documents and certificates as and when required.

Signature : ---------------

Date : Jun 2010
Place : Mumbai

[Guest]

CURRICULUM VITAE:
KAKKAR DHIRAJ
E-mail :cooldhiraj22 AT yahoo.com

WORKING EXPERIENCE :
8 YRS AS NDT TECHNICIAN AND CO-ORDINATOR, NDT INSPECTOR IN INDIA AND ABROAD.

QUALIFICATION :
1. HIGHER SECONDARY ( 12th)
2. A.S.N.T LEVEL II (U.T, R.T, M.P.T , P.T & V.T )

TASKS AND ACTIVITIES :
- Coordination of NDE activities (Radiography Testing, Ultrasonic Testing, Magnetic Particle Testing and Penetrant Testing.)
- Visual inspection of Welds.
- Dimensional Inspection
- Preparation of Procedures, reports and Documentation.
- Welding inspection activities Supervision(Fit up, weld visual ).
- Review of Mechanical Testing Reports.
- Coordination with Third Party Inspection Agencies.
- Incoming Material Inspection (Review of MTR’s).
- In process and Stage wise Inspection based on Process Plan.
- Vendor development and man power Supervision.
- Ensuring SAFETY PRACTESES in Plant Inspection.

AREAS OF EXPERIENCE :
- Oil & Gas, Power and Petrochemical Project.
- Lignite mines (Neyveli, India).
- Structural Welds.
- Pressure Vessels.
- Cross Country Pipe lines.
- ASME U-Stamp Vessels.

WELL VERSED WITH CODES AND STANDARDS:
- Process Piping(ASME B31.3)
- Power Piping(ASME B31.1)
- ASME Sec V (NDT)
- AWS D1.1 (STRUCTURAL)
- API 650
- API 620

WORK EXPERIENCE:
1. Organization : PEMCO Inspection Company (Doha,Qatar).
Position : Working as NDT Tech and Operations Coordinator.
Period : 18.07.2008 to Till Date on business visa (B V).
Projects :
: DOPET HALUL ( Epic crude oil pipe line ).
: Qatar Petroleum (Offshore Locations PS1, PS2, PS3, PS4 and
Halul Island).
: Qatar Petroleum (DUKHAN).
: AL MAESAID Project for Qatar petroleum (QAFCO-5).

2. Organization : Industrial Radiographic Inspection Co. Coimbatore (India).
Position : Worked as NDT Technician + Supervisor.
Period : 15.05.2003 to 20.06.2008.
Projects : Kalyan Thermal Power
Station – 1 to Kumbhakonam Power
Station – 2 (345 KM).

TECHNICAL SKILLS:
- A.S.N.T. LEVEL –II (U.T, R.T, M.P.T , P.T & V.T ).

COMPUTER SKILLS :
- Operating Systems : M.S. Dos, M.S. Windows
- Applications : M.S. Office

[Unregistered]

CURRICULUM VITAE
Rahul Singh
E-mail : rahulajeetsingh AT gmail.com

Areas Of Experience :
1. Critical Piping
2. Turbine piping
3. Auxiliary Piping
4. Ducting Structure

PERSONAL PROFILE :
Father’s Name : AJEET SINGH TAMANLAL THAKUR.
DOB :14/10/1991
Sex : Male
Marital Status : Single
Nationality : Indian

Languages Known :
1. English
2.Hindi
3. Marathi
4. Punjabi

Strength :
Passionate about work Ability to work in group
Positive attitude
Cool temperament

Computer Knowledge :
Well versed in MS Office.

Expected Salary : Negotiable Objective
To work in a global environment by utilizing my ability, knowledge and logical thinking to the best and to improve and upgrade my skills according to organizational needs.

Academic Qualification :
** B.Sci in Physics with 53.12% (2011-12)
** 12th State Board with 60.3% ( 2008-09 )
** 10th Matriculation Board with 66.15% ( 2006-05)

Other Courses :
** ASNT Level II in Radiographic Testing , Ultrasonic Testing , Liquid Penetrant Testing , Magnetic Particles Testing.
** ASNT Level II course in Bhide’s Institute of Testing Technology Pvt. Ltd.

Work Experience :
Having 1 year experience in NDT Supervisor and Quality Control.

Company / Address : Creativendt Services / Pune
Designation : NDT Technician
Inclusive dates : 4 Sep 2012 to date 12 March 2013.
Project : Third Party Inspection.
Client : Sparklets Eng. Limited , CMI ,
Hindustan SteelForging , Sunil Forging, Voltas etc.

Company / Address : UB Engineering Limited / Pune
Designation : QA/QC NDT Supervisor
Inclusive dates : 8 March 2013 to date 9 Sep 2013.
Project : 5 x 660 MW Supercritical Thermal Power
Project : Tirora.
Client : Adani Power Maharashtra Limited
Work Profile :
1. Knowledge of WPS/PQR and familiar with International codes like API, ASME, ASTM.
2. Responsible for raw Material Inspection in line, stage and final inspection, process control parameters standardization.
3. Witnessing Destructive and Non-Destructive Testing.
4. Well aware of all Quality related Documentation & review of calibration certificates & batch test certificates.
5. Inspection of fit up and Weld Visual & Making reports.
6. Well aware of drawings like P&ID and Isometrics.
7. Ensure all documentation to execute the work such as approved welding procedures, Quality Control Procedures, NDT Procedures, Codes, Standards are available at work place.
8. Approval of QA Plan, Welder Qualification and Preparation of WQT & WPQR.
9. Interpretation of Radiographic films and supervising the repair procedures if any.
10. Experienced in PMI and Hardness Testing of materials.
11. Well aware of welding techniques like SMAW, GTAW, GMAW and SAW.
12. Used with Heat Treatment of weld joints like Pre-Post Heatings and Stress Relieving.
13. Assessing the joint strength using Hardness and PMI.
14. Consumable Management & Bill checking of contractors as per work done.

Experienced in welding of materials like
P91&T91 , P12&T12, Carbon Steel Grades, Stainless Steel grades like 304,308,316,321 and 347

Declaration :
The above details are true to the best of my knowledge and belief.
PLACE : Mumbai
DATE :
Rahul Singh.

[Unregistered]

CURRICULUM VIATE :
Nimbal Vinet Vijaykumar

PERSONAL SUMMARY :
A Capable of production manager as well as quality control inspector who can quick to identify any production shortcomings or wrong doing. Maxine works methodically and accurately with high level of attention to detail, meaning that he can strictly follow inspection procedures to test products to uncover defects. He has a passion of excellence and as a true professional will always ensure that adequate corrective measures are implemented in cases of any noncompliance. Right now, he would like to work for a company that is searching for extraordinary production management and Q.C. inspectors.

WORK EXPERIENCE :
UNITED ENGGIENERS AND CONSULTANTS –SHELAR WASTI, CHIKALLI, PUNE-PRODUCTION INCHARGE– NOVEMBER 2016- present
Responsible for ensuring the smooth running of the production department, whilst ensuring that departmental targets and delivery schedules are met.

DUTIES :
** Closely monitoring and examining each stage of the entire production process.
** Segregating non-conforming parts in accordance with written quality procedures.
** Making sure that company should follow documented procedures and standards.
** Ensuring all the identification parts/components implementing in production field as per drawing.
** Returning all the faulty parts to team members who are responsible for them.
** Using precision tools and statistical software to quickly identify defective parts.
** Ensuring that the working area is hazard free and kept clean.
** Participating all the safety related training workshops organized by the company.
** Advising senior managers on health and safety arrangements of subordinates.
** Reporting any accidents, incidents, near misses, actual or potential problems with products, short in purchasing of raw materials according to senior managers.

KEY SKILLS AND COMPETENCES :
** Ability of working with limited supervision in a pressurized environment.
** Accurately reading and interpreting details and technical drawings and blueprints.
** Good oral and written communication skills that enable me to communicate well.
** Can build the confidence, pride and self-esteem of those who work around me.
** Experience of working within a busy and driven manufacturing environment.
** Computer literate with knowledge of Microsoft office,basics of Software- Ansys 14.5 , Creo parametric p4.2, Auto Cad, Catia V5 R-20
** ASNT level-II NDT-(UT,RT,MPT,DPT) & (QA/QC)

EDUCATIONAL DETAILS :
BE A.G.P.I.T SOLAPUR SOLAPUR UNIVERSUTY 2016 75.56%
TE A.G.P.I.T SOLAPUR SOLAPUR UNIVERSUTY 2015 57.63%
SE A.G.P.I.T SOLAPUR SOLAPUR UNIVERSUTY 2014 58.77%
DIPLOMA A.G.P.P.I SOLAPUR MSBTE 2013 60.24%
SSC K.V.SOLAPUR CBSE 2010 5.8%

ACADEMIC PROJECT DETAILS :
MINI PROJECT : REFRIGERATION TOOLS – EQUIPMENTS THAT ARE USED FOR REFRIGERATION MAINTENANCE.

BACHELOR OF ENGINEERING :
1. EXPRIMENTAL INVESTIGATION OF A SINGLE CYLINDER DISEL ENGINE USING WASTE OIL(TPO) AS A BIO-FUEL.
2. INVENTION OF SOLAR CAR FOR (ESVC) COMPITATION- BHOPAL

DATE :
PLACE :