Piping & Pipeline Design engineer, EXECUTION : Resume CV

[rethukk]

Retheesh Kumar. K
Email id : rethukk AT yahoo.com

OBJECTIVE :
Seeking a challenging career in the field of mechanical Engineer(piping) in professionally managed company with learning and growth of opportunities having adequate authorities and responsibilities to implement the skills being acquired thereby contributing to the progress of the firm and thus grow personality.

PROFESSIONAL SYNOPSIS :
An astute Piping engineer with 5 years of experience in the field of Piping engineering, design, piping construction and detail engineering of piping and pipelines associated with Oil & Gas Sector, Petro-Chemical & water supply EPC in both Indian and Global Projects with ASME, ASTM , API standards.

TASK EXECUTED :
PIPING ENGINEERING & EXECUTION :
- Preparation of As-built drawings for pipe lines.
- Hydro testing of pipeline & station piping.
- Loop identification from P&ID and instrument loop diagram.
- Preparation of cut lists for fabrication of welding spools.
- Conducting Hydraulic test, compaction test, Radio graphic test
- Inspection of Liquid penetration test, Magnetic test, Holiday test, Gravity test.
- Doing Non- Destructive Test on repair joints and cutting pipe.
- Confirm that the line is completed as per ISO drawing specifications.
- Installation of various pipes-carbon steel, stainless steel, RTRP, HDPE, DI, PVC.
- Pipe support inspection & reinforced pad leak testing.
- Check and review for punch list clearance before pressure tests.
- Closing NCR’s issued by the client inspector for construction activity.
- Isometric drawing joint marking and P&ID verification.
- Checked and approved vendor drawings as per company procedures.
- Reviewing gauges calibration certificates prior to release for hydro test.
- Checking of piping specification class, valve datasheets & piping material selection.
- Pipe line bundle and multi flow line fabrication and launch operations.
- Entire piping inspection during site fabrication and shop fabrication.
- Piping line check punch list preparation witnessed hydro testing.
- Pipe support inspection and reinforced pad leak testing.
- Hydro static pressure testing of pipe lines.
- Storms water and sewer pipe line installations.
- Reviewing gauges calibration certificates prior to release for hydro test.
- Analyzing the requirements of temporary supports for A/G piping during hydro test.
- Line list preparation.
- Review work method statements and procedures.
- Inspection of hot and cold insulation for piping and equipments .
- Witness PT, UT, MPT inspection.
- Making as built drawing for the lines.
- Inspecting material before erecting the line and initial stage of welding.
- Preparation of weekly and monthly reports to client and senior management.
- Handling the pre commissioning and flushing activities.
- Piping line check to confirm that the lines is completed as per ISO.
- Preparation, development and review of project quality plans.
- Closing NCR’s issued by the client inspector to the construction activity.
- Review hydro test package to verify the completion of NDT requirements.
- Preparation of hydro test package as per ISO.
- Performing the box off operation before starting the commissioning activities.
- Verification of materials, materials receiving inspection prior to release for fabrication.
- Ensure project quality objectives are attained.

Design Engineering :
- Developing pipe routing and layouts as per ASME B 31.3
- Knowledge on plot plan, key plan, piping GA, piping isometric & final MTO.
- Sizing of pipes and pressure drops.
- Preparation of Bill of Material (BOM).
- Generation of GA & Isometric drawings.
- Modeling of equipments, piping and structures in PDMS.
- Design and generate piping supports as per standards.
- Preparation of Bulk MTO (Material Take Off) from P&ID layout.
- Knowledge on miter bend & reinforcement calculations.
- Routing of pipes by using PDMS as per P&ID.
- Pipe rack design and knowledge on PDMS modeling .
- Preparation of line list by using P&ID.
- Knowledge on ASTM, ASME and other codes and standards.
- Pressure –Temperature ratings & calculations.
- Proficient in piping material specification.
- Knowledge on flexibility analysis with Caesar-II.
- Stress analysis and deflection calculations.

DESIGN WITH PDMS :
- 3D modeling of equipments, piping and structures in PDMS.
- Extraction of 2D- GA Drawings for Piping, Equipments & Structures.
- Designing of inter-connection piping & equipments based on process/utility P&ID.
- Preparation of foundation for equipments & pumps.
- Preparation of PFD, equipment & piping layouts, Piping isometrics & BOQ.
- Knowledge of pipe rack design, routing and PDMS modeling.
- Generate piping isometric drawings.

STRESS ANALYSIS WITH CAESAR-II :
- Piping flexibility analysis & preparation of stress reports.
- Thermal displacement calculations of equipment’s.
- Analysis of existing lines connected to rotating equipment.
- Stress analysis of critical lines and sensitive equipment systems.
- Pipe stress analysis static and dynamic using CAESER II software.
- Equipment nozzle thermal growth.
- Stress and stability calculations and review of vendor drawings.
- Stress analysis and deflection calculations.
- Stress Analysis and Pressure Drop Analysis throughout the system.
- Stress Analysis for Seismic and Wind cases.
- Analysis with allowable span calculations.
- Flexible analysis using Nomo graphs.
- Calculations of stress intensification factor.

Professional Experience :
Oil & Natural Gas Corporation, India
Project : MRPL Sulphur Recovery Unit-III-Chemical Plant Project.
Designation : Piping Engineer (Jan 2010 to May 2010 )
Summary : Re-Routing of Existing Pipelines and connecting to the storage areas in the part of plant expansion .Working on this project under contract with Task Engineering India Private Ltd.
Daelim Saudi Arabia Company Ltd, Saudi Arabia.
Client : National Chevron Philips, Saudi Polymers, K.S.A

Project : NCP South plot Petro-chemical plant construction project, K.S.A
Designation : Piping Engineer (Dec 2008 -- Dec 2009)
Summary : Construction of petro-chemical plant for the production of HDPE.
IPEBS-energizing, Hyderabad, India.

Project : Oil & Gas Project.
Designation : Piping Engineer ( Feb 2008 -- Oct 2008 )
Summary : The existing Plant comprised of 5 sub-centers which was then revamped to 9.
IVRCL Infrastructures & Projects Ltd, Kerala, India.
Client : Kerala Industrial Infrastructure Development Corporation.

Project : KINFRA industrial project, Kerala.
Designation : Pipeline engineer (May 2005 – Jan 2008)
Summary : Construction of utility service over 20 km pipe line for industry purpose.

Academic Credentials :
Bachelor of Technology in Mechanical Engineering from LBS College of Engineering , University of Kannur, Kerala, India.
Post Graduation in Piping Design & Engineering with PDMS and CAESAR-II from IPEBS institute of piping engineering and building service, Hyderabad, India.

COMPUTER PROFICIENCY :
1. PDMS 3. Caesar-II
2. Auto CAD 4. Spool Gen.

PERSONAL STATUS :
- Date of birth : 25-05-1983
- Family status : Single
- Nationality : Indian

DECLARATION :
With reference to the above information I, RETHEESH KUMAR.K promise to devote myself in the company with my hard work and to use all my knowledge and experience for company’s business and progress if given an opportunity.

Retheesh Kumar. K

[Guest]

Curriculum vitae :
Syed Abudhahir
E-mail id : syedmech3169 AT gmail.com

CAREER OBJECTIVE :
I would like to work for a company which give me opportunity to grow

EDUCATIONAL QUALIFICATION :
EXAMINATION DISCIPLINE / SPECIALIZATION SCHOOL / COLLEGE BOARD / UNIVERSITY YEAR OF PASSING AGGREGATE % :
Diploma Machanical Engineering Veltech Polytechnic College DOTE 2012 64%
10th State Board Government Hr.Sec.School State Board 2007 59%

TECHNICAL SKILL :
Auto cad, PDMS, Ceasar

PROJECT PROFILE :
Project Title :Fabricatiom of mini vertical lathe

PERSONAL DETAILS :
Date of Birth : 06.05.1992
Nationality : Indian
Sex : Male
Languages Known : Tamil, English
Hobbies : Playing Foot Ball,cricket

DECLARATION :
I hereby declare that the above-mentioned information is correct up to my knowledge and I bear the responsibility for the correctness of the above-mentioned particulars.

Place : Chennai
Date :

(SYED ABUDHAHIR.A)