Resume : Mechanical Site Construction Engineer

[edvin]

CURRICULUM VITAE

EDVIN.C.DAVID
Trichur (DT) Kerala PIN-680581
edvinceedee AT gmail.com

Career Objective :
To secure a challenging position where I can effectively contribute my skills as a Mechanical Engineer, possessing competent Technical Skills.

Educational Qualifications :
Examination Discipline/ Specialization School/college Board/ University Year of Passing % :
B.Tech Mechanical Engineering Sree Narayana Mangalam Institute of Mgmt. & Tech., Kerala Mahatma Gandhi University 2009 66.64%

HSC Science C.M.S.Higher Secondary school, Kerala Kerala State Board 2004 68.66%

S.S.L.C S.S.L.C C.M.S.Higher Secondary school, Kerala Kerala State Board 2002 81.33%

Experience :
One year experience in construction field as a mechanical engineer.

Computer skills :
Languages : C

Operating Systems : Windows 98/2000/XP
Applications/Packages : Diploma in Mechanical CADD & CATIA, MS Office, Internet Applications

Academic Seminar
Seminar : SKID STEER & MULTI TERRAIN LOADERS
DESCRIPTION :
The objective of this seminar is to demonstrate the working of skid steers & multi terrain loaders. Also demonstrate the importance of the skid steer loaders in the present world. Apart from these, this seminar also emphasizes on the various systems and technologies associated a skid steer loaders.

Academic Project :
Project : SOLAR UPDRAFT SYSTEM
DESCRIPTION :
The objective of this project is to establish an innovative idea to utilize one of the most prominent renewable sources of energy – the solar energy for producing power on large scale. Sensible technology for the wide use of renewable energy must be simple and reliable, accessible to the technologically less developed countries that are sunny and often have limited raw materials resources. The solar updraft (tower) system is one such system that composes of the most sensible and simple technologies. In our project the main emphasis was to make this system more sensible than it is in the present situation.

Personal Profile :
Name : Edvin.C.David
Sex : Male
Marital Status : Single
Nationality : Indian
Hobbies : Reading, Bike Riding and Technical Surfing
Date of Birth : 18-05-1987

Achievements :
I served as the Medical leader of the technical festival “ONYX’09” conducted at Sree Narayana Mangalam Institute of Mgmt. & Tech., Kerala

Declaration :
I hereby declare that the above-mentioned information is correct up to my knowledge and I bear the responsibility for the correctness of the above-mentioned particulars.

Place : Kerala
(Edvin.c.David)

[Guest-IJT]

assistant site incharge

CURRICULUM VITAE
Name : Ashutosh Gautam
B.Tech (Mech.)
CAREER OBJECTIVE : To secure a promising positioning that offers both a challenge as well as good opportunity for growth.

PROFESSIONAL QUALIFICATION :
Degree Branch Session Marks % University Institute :
B.Tech Mechanical Engineering 2003-2007 66.78% Uttar Pradesh Technical University
Lucknow Babu Banarsi Dass Institute of Engineering Technology & Research Centre,Jhangirabad ( U.P)

MANAGEMENT QUALIFICATION :
Doing MBA from IIMA Affiliated to Periyaar Manniamai University (TN)

EDUCATIONAL QUALIFICATIONS :
- Passed Intermediate from U.A Board in IInd division
- Passed High school from C.B.S.E Board in IInd division.

WORKING EXPERIENCE :
III. ION EXCHANGE (INDIA) LTD :
Presently working in ION Exchange (INDIA) LTD. w.e.f. 15-04-2008.
A - PRESENT POSTING ; Presently I have been posted in RELIANCE THERMAL POWER PLANT , Roza (Shajahanpur UP) as Asstt. Site In-charge and Mechanical Maintenance incharge

JOB RESPONSIBILITY :
I am looking after Operation and Maintenance Department of D.M. Water Plant. Mechanical devices used in DM Water Plant are Horizontal Pumps, Vertical Pumps, MiltonRoy Dosing Pump, Dosing Tank Agitator & overall Maintenance of Valves & Filter used in Water Treatment Process such as PSF, ACF, SBA, SAC & MB Unit .

B- LAST POSTING :
I have also worked in Railneer Packaged Drinking water plant Nangloi as Assistant Site Incharge.
JOB RESPONSIBILTY :
1. Responsibility of maintenance of Mechanical Machines used such as
Compressor, Sidel Machine, Rinser Filler Capper Machine etc
2. Overall Responsibility for treatment of water by using Latest Technology
Of “ ULTRA FILTRATION, REVERSE OSMOSIS, ULTRA VIOLATE LAMPS & OZONISATION.
3. Providing Solutions to Quality Related Problems through the process of Production.

II. INSTA EXHIBITION PVT LTD, SIDCUL, HARIDWAR : I have worked in this
company as PRODUCTION ENGINEER w.e.f. 1-10-2007 to 12-04-2008.
Company Profile : An ISO 9001:2000 certified company with Expo Display System, manufacturer of Display product and Stall construction with annual turnover of Rs. 180.00 crores having office in 7 countries.
I. HINDALCO INDUSTRIES LIMITED,RENUKOOT (U.P). (An ADITYA BIRLA GROUP COMPANY : I have undergone Industrial training in CO- GENERATION PLANT AND AUTOMOBILE PLANT of this company.
Present salary - Rs. 17,000/= per month.
Expected salary- Negotiable

Computer Knowledge :
Operating System : DOS, Windows 98/2000/XP.
Word Processing : MS-Office, Microsoft Excel
Softwares : AUTO CAD

Project :
Final Year Project : CNC (Computer Numerical Control) in drilling.
Personal Details Name : Ashutosh Gautam
Father’s Name : Mr. G.S Gautam
Date of Birth : 20 Nov. 1984
Marital status : Single
Address for Correspondence :
Near Rishikesh, Uttrakhand
Email : ashu_gautam2007 AT yahoo.co.in

Declaration : I declare that all the information furnished above is true to the best of my knowledge.

Ashutosh Gautam

[Guest-IJT]

site engg

Vijayawada - 520009.
E-mail : vijay.uppe AT gmail.com
Vijay.uppe AT rediffmail.com

To learn and function effectively in an organization and be able to deliver to the bottom-line. To constantly upgrade my knowledge and skills and make a difference in whatever I do.

2011 Pursuing M.Tech (CIM) COMPUTER INTEGRATED
MANUFACTURING form K.L.UNIVERSITY, Vijayawada. With C.P.G.A 6.5.

2008 B.Tech (MECHANICHAL) from LAKI REDDY BALI
REDDY COLLEGE OF ENGINEERING Affiliated to J.N.T.U. with near to 60%.

2004 XII from KBN College, Vijayawada,
Board of Intermediate with 59.60%.

2002 X from TERESA Convent &School, Vijayawada,
(SSC), Board of secondary Education with 59.40%.

- Designing& Manufacturing : PRO-E, CNC PROGRAMING, AUTO CAD
- Languages : C with DS , C++
- Operating Systems : MS DOS, Windows98, XP

- Member of Indian society for technical education.
Company Name : PUZZOLANA MACHINERY FABRICATORS
Designation : SITE ENGINEER
I was worked in this company form August 2008 to July 2009.

- Date of Birth : 19-04-1987.
- Gender : male.
- Father name : U.Narasimharao.
- Mother tongue : Telugu.
- Nationality : Indian.
- Marital Status : Single.
- Languages : Telugu, English, Hindi.

I do hereby declare that the particulars of information and facts stated herein above are true, correct and complete to the best of my knowledge and belief.

PLACE :
DATE :
VIJAYESWARA RAO.UPPE

[Guest]

CURRICULUM VITAE :
VIRENDRA KUMAR YADAV

E-mail : viru.dme AT gmail.com

Career Objectives :
I look forward to build a career in an organization where I would leverage my abilities, interests & knowledge into a meaningful contribution towards meeting the organization and personal goals.

Summary :
Around 3 years of experience in Quality control & Production Engineer in the field of Fabrication / Erection & manufacturing of Power Boilers at Petrochemical Refinery, Fertilizer, Sugar Mill etc.

Work Experience :
Working with CHEEMA BOILERS LTD. as a Quality cum erection and commissioning engineer from August 2008 to till date.

Technical Qualification :
1. Diploma in Mechanical Engineering from IASE University with 76.05% Marks
2. NDT LEVEL –II
- RADIOGRAPHIC TESTING
- ULTRASONIC TESTING
- DYE PENETRANT TESTING
3. Designing cores AUTO- CAD & PRO-E

Company Profile :
CHEEMA BOILERS LIMITED. Cheema Boilers Limited, popularly known as CBL is a trusted name in the field of Indian Boiler Industry. It is known for its commitment, competence and compliance. CBL was established in the year 1999 to provide complete solution to steam generation needs. The company's origin in the boiler industry goes back to founding of its sister concern Cheema Engineering Services (P) Limited engaged in manufacturing of Steam Boilers, Pollution Control equipment, Fluidized Bed Conversion and energy saving devices.

Job Responsibility :
1 Production Planning and Control.
2 Monitoring work to achieve production to targets.
3 Monitoring the daily of progress.
4 Incoming inspection raw material
5 Online and final inspection of product.
6 Maintaining the quality Document.

Project Handling :
1. Erection of 30 TPH /45 Kg/ cm2 AFBC Power pack Boiler Erection at M/s. Arcoy Bio-refinery Pvt. Ltd. Plot No.29, GIDC Industrial Estate Panoli (Gujarat)
2. Erection of 25 TPH /45 Kg/ cm2 AFBC Power pack Boiler Erection at M/s. SUNSTAR OVERSEAS LTD.( TANGRA AMRITSAR)
3. Erection of 14.1 TPH /83 bar India’s first solar thermal Boiler Erection at M/s. ACME TELE POWER LTD. (BIKANER ,RAJASTAN)
4. Presently 25 TPH/67KG/CM2, AFBC Power pack Boiler erection is under progress at M/S GLOBUS SPIRITS LTD. (SMALKHAN, HARIYANA).

[Guest]

SHIVANSHU MISHRA

Email : shivanshu.mishra89 AT gmail.com

CAREER OBJECTIVE :-
To associated with a progressive organization which can provide me with a dynamic work sphere to extract my inherent skills as a professional, use & develop my attitude to further the organization’s objectives and also attain my career targets in the progress.

PROFESSIONAL SUMMARY :-
B. Tech :- Electrical & Electronics Engineering
EDUCATION :-
Education University/Board % Year
B.TECH.
(Electrical &Electronics U.P.T.U. 70.44 2011
(10+2)A.B.V.I.C
MEERANPUR KATRA U.P BOARD 69.8 2007
(10)A.B.V.I.C
MEERANPUR KATRA U.P BOARD 70.83 2005
KEY SKILLS :-
*Power system , *Electric Machines ,* Basic Electronics
COMPUTER SKILLS :-
*windows(98 ,XP ), *MS office
OTHER SKILLS :-
*Ability to work in a team.
*Willing to learn and apply my knowledge to practical situations.
*Analytical and logical problem solving abilities.
*Good at planning, organizing events.
INDUSTRIAL TRAINING & VISIT :-
*I have done industrial training of six weeks at 509 ARMY BASE WORKSHOP, Agra cantt, Agra.
*I have done industrial training of one month at KOTSONS PVT. LTD., Shikandra, Agra
*I have done industrial visit HIND LAMP, Shikohabad

PROJECT DETAILS :-
Major project :-
“DESIGN AND DEVELOPMENT OF THREE PHASE (BEST) SELECTOR”.
Project done at :- J.S.I.M.T. SHIKOHABAD.
Abstract :- Main object of this project is to select one of the best phase from the three phases.
Application areas of this project are :-
1.FOR INDUSTRIAL PURPOSE.
2.AT HOMES.
3.EQUIPMENT PROTECTION.

Mini Project :-
“DESIGN AND DEVELOPMENT OF ELECTRONIC CUT-OUT”
Project done at :- 509 ARMY BASE WORKSHOP, AGRA.
Abstract :- The main object of this project is to replace ELECTROMECHANICAL CUT-OUT and Prevent the battery from over charging.

EXTRACURRICULAR ACTIVITIES :-
1.Worked as Volunteer of “EN Branch” for 4 year in J.S.I.M.T. Shikohabad.
2.Worked as Class Representative of “EN Branch” for 4 year in J.S.I.M.T. Shikohabad.
3.Participated in Cultural Activities in Annual Function of college and won many prizes in
“GROOVE-2008”, “TARANG-2009”, “TARANG-2010”& “TARANG-2011
STRENGTHS :-
1.Energetic
2.Positive outlook with a passion to achieve results
3.Flexible, can adjust to any circumstances.
4.Capability to interact with various people at different levels.
HOBBIES :-
1.listen music.
2.Internet surfing
3.Playing cricket

[Anand1230]

N.ANAND
Email : anandmech1230 AT gmail.com


OBJECTIVE :
To incessantly strive in all areas of engineering with my mechanical engineering background.
EDUCATIONAL QUALIFICATIONS :
- Completed my Bachelor of Engineering in Mechanical domain during 2007-2011from M.A.M College of Engineering with 72%.
- Completed my XII standard with 69% from Government Higher Secondary School Lalgudi
- Completed my X standard with 71% from Government Higher Secondary School Lalgudi


SOFTWARE SKILLS :
- AutoCAD
- Pro/Engineer
- Ansys

AREAS OF INTEREST :
- Manufacturing/Production Engineering
- Design Engineering
CO-CURRICULAR ACTIVITIES :
Projects :
- Design and Fabrication of Multipurpose of Jigs and Fixtures : In this process by using a single work piece and done to the multiple operations using jigs and fixtures. It will be minimized the machining time and maximize the production
- Machining Parameters in various work piece materials with drilling operations by using genetic algorithm : In this process by using various work piece materials and drilled the work pieces by using various machining parameters such as speed, feed and depth of cut. And then analyzed which hole is best and accurate by using ANNOVA the analysis software.

Work shop :
Attended work shop on Basics of Materials joining conducted by” The Indian Institute of Metals (IIM)” Tiruchirappalli, on March 29, 2009
In Plant Training :
- GB Engineering Enterprises Private Limited, Thuvakudi.
MEMBERSHIP IN PROFESSIONAL BODIES :
- Member of The Indian Institute of Metals (IIM).
EXTRA CURRICULAR ACTIVITIES :
- Got 2nd price in cricket at our college
HOBBIES :
- Listening to music
- Playing Cricket

[Guest]

CURRICULAM VITAE
Email : sudhakarprasad90 AT gmail.com
SUDHAKAR PRASAD
Career Objective :-
To achieve professional excellence in my work through a process of learning
combined with experience. I wish to be a part of the team where I will be able
to utilize my potential to have the organization to achieve its organizational goal.
Educational Qualification :-

- 3 Year Diploma from Mechanical Engineering (Production) with 1st division (73.09%) in 2010.
- 10th from U. P. Board with 1st division (63.33%) in 2005
Qualification in Computer :-
- Two week CNC Turning Programming & Simulation from ATI, Kanpur.
- Two week CAD (2D & 3D) Mechanical drawing using Auto CAD from ATI, Kanpur.
Vocational Training :-
- Two week vocational training in DEV Industries Gorakhnath, Gorakhpur.
- One month Vocational Training in Small Arms Factory, Ministry of Defence, Kanpur
At Present :-
- Undergoing 1 year Diploma Apprenticeship in INSAS Assembly section in Small Arms Factory, Ministry of Defence, Kanpur
Strengths :-
- Self motivated, Enthusiastic, Always ready to learn new things, Perfectionist and Optimistic. Completely dedicated to my work.

Declaration :-
- I hereby declare that statements made above are true, complete and correct to the best of my knowledge and belief.

Place :-KANPUR
Date :-…………… (Sudhakar Prasad)

[Guest]

BRIJESH S. PATIL
atulvp AT godrej.com
E-Mail : patil_brijesh11 AT yahoo.co.in
OBJECTIVE :
- To achieve the best in the field of ENGINEERING.
- To always find myself in a challenging job situation where in I can contribute to the vision of the organization.
ACADEMIC QUALIFICATION :
Degree University Board Institute % Year of Passing
INSTITUTE OF MECHANICAL I.M.E )
ENGG.(INDIA) SHREERAM INSTITUTE(NASIK) 50% 2006
DIPLOMA IN PRODUCTION
ENGG. B.T.E BHAUSAHEB VARTAK POLITECHNIC(VASAI) 57.55% 2002
(S.S.C ) MAHARASHATRA SUVIDHYALAYA(BORIVALI) 50% 1998
COMPUTER KNOWLEDGE :
- EXCEL, WORD
- AUTOCAD 2000
- MS-CIT
- IDEAS-11
INDUSTRIAL EXPERIENCE :
- COMPANY NAME : TATA STEEL (TARAPUR PLANT)
DESIGNATION : Trainee Engg in (QUALITY & PRODUCTION DEPT).
DURATION : From 1st January, 2003 to 1st January, 2004
- COMPANY NAME : 'KLT AUTOMOTIVE & TUBULAR PRODUCTS'
DURATION : 10th March 2006 to10 Feb 2007 as junior engg in ( PRODUCTION DEPT)
1) Knowledge about different welding parameters.
2) Also working on qualifying gauge.
3) Having knowledge about CII Activities like 'WPP, FPP, RED TAG CAMPAIGN'.
4) Also attended complaints at the customer end.
5) Worked in dispatch section of chassis division.

- Presently working as a ASST MANAGER IN PRODUCTION since March-2007 to till date.
'PARLE ELIZABETH TOOLS PVT.LTD.' An ISO 9001-2000 Certified which is biggest manufacturer of tablet tools and dies in India.
Job responsibilities :
1) Weekly planning of lots movements from production dept. to quality control dept.
2) Managing Tool room with 7 VMC,9 CNC Lathe m/c &.3 wire cut m/c,4 cylindrical grinding m/c and 2 center less grinding m/c.
3) Managing Fluidized Bed Heat treatment plant, familiar with different heat treatment cycles.
4) Managing Vaccum Heat treatment plant.
5) Process planning.
6) Maintaining weekly as well as monthly dispatch schedule as given by sales coordination.
7) Tryout of new Tools & Cutters.
8) Weekly planning of manpower for production dept.
9) Preparation of corrective and preventive action against rejections and reworks.
10) Handling a team of 30 to 35 members in shift.
TOTAL EXPERIENCE
- 7 YEARS

[Guest]

CURRICULUM – VITAE
Imadsiddiqui002 AT gmail.com
Imadsiddiqui002 AT yahoo.com
IMAD SIDDIQUI
OBJECTIVE :-
Want to achieve a stable position and a successful carrier on the basis of my
Hard work. Utilizing my education and all abilities to achieve company’s goal and for
Its growth.
EDUCATIONAL QUALIFICATION :-
1 10th Pass ( U P )
2 12th Pass ( U P )
3 B.Com ( U P )
PROFESSIONAL QUALIFICATION :-
1 Knowledge of Basic Computer
2 One Year Diploma in Multimedia
PROFESSIONAL Experience :-
1 Working as a Graphic Designer in Green Photo Litho (New Delhi) August 2008 to April 2009.
2 Working as a Graphic Designer in Sym Advertising & Marketing (New Delhi) April 2009 to July 2010.
3 Working as a Graphic Designer in Shiva International (New Delhi) July 2010 to Till Date
I hope you will find me suitable for the post. If selected I prove to be an asset to
the company
Date :
Place : ( Imad Siddiqui )

[Guest]

Currivulum-Vitae
Distt.- Shahjahanpur (U.P.)
Pramod Kumar

Career Objective :
* To succeed in an environment of growth and excellence and earn a job which provides me job satisfaction and self development and help me achieve personal as well as organization goals.

Academic Qualification :
* Pursuing M.A. (English) Ist year from M.J.P. Rohilkhand University, Bareilly.
* B.A. Passed from M.J.P. Rohilkhand University, Bareilly in 2012.
* 12th Passed from U.P. Board in 2007.
* 10th Passed from U.P. Board in 2005.

Techinical Qualification :
* ADCHN (Advance Diploma in Computer Hardware & Networking) from GT Computer Hardware Engineering College, Buduan.
* One year Diploma in Computer Software Engineering from ITIL, Buduan.

Operating System :
* Installation / un-installation, configuration & maintaining Windows 98, Window XP, Window 2000, Windows 2003, Windows Millennium, Windows NT, Windows-7.
* Package : MS-Office (Word, Excel, Power Point), Internet.
* Hardware Skills : PC Assembling, Disassembling, Configuration & Maintaining.

Networking Operating System :
* Windows 98, Window XP, Window 2000, Windows 2003, Windows Millennium, Windows NT, Linux and Window-7.

Travel Shooting Mail :
* Outlook, Thunder Word, Window-Live, Lotus Note. Window live Mail

Remote Assess :
* Remote Connection, Team Viewer, Cross Loop, Ammy Admin, Show my PC.

Card Level Repairing :
* SMPS, UPS, MONITOR, printer, scanner, mouse, keyboard, motherboard, storage peripherals.

Experience :
* One year worked on Computer Shop in Badaun
* 1½ yrs. working with DTDC Courier & Cargo Ltd., Aligarh as a IT Service Supervisor.

Personal Details :
Date of Birth : 6th Aug. 1991
Sex : Male
Religion : Hindu
Nationality : Indian
Marital Status : Married
Language Known : Hindi, English
Hobbies : Cricket, Listening to Music, Walking & Meeting New People.

Date :
Place : (Pramod Kumar)

[Unregistered]

CURRICULUM VITAE
KANHAIYA LAL TIWARI
Distt. Shahjahanpur (U.P) 242001
E-mail- tiwari_kanhaiya AT rediffmail .com
Kanhaiya.akc73 AT gmail.com
Kanhaiya.akcworld AT yahoo.com

- To Work in a professional environment that is aggressive to understand the need of the client one this has a vision for the future and where I can apply my innovative ideas.

- M.Com. (Post Graduation) in from Ruhal Khand University in 1994-1996.
- B. Com. (Graduation) in from Ruhal Khand University in 1991-1994.
- Intermediate U.P. Board from S.P. Inter Collage Shahjahanpur in 1990
- High School U.P. Board from S.P. Inter Collage Shahjahanpur in 1988

- Operating System : Windows 99 / 2000 / XP/window 7/
- Package : MS.Office: MS-Excel, MS.Word, & Power Point. Internet

- Computer know : D .C.A & TALLY 7.2 ,9 Tally ERP

- Worked as a Accountant Ajai & Co (Bajaj) District Shahjahanpur (U.P.) since Feb-2003 to Feb-2006.
- Worked as a Computer Oprater I. T.C Distributer at Shahjahanpur (U.P.) since 01-Feb-2006 to Sept-2008.
- Working is a Office Incharge Roza Tharmal Powar (Realince) 2009 to till time.

Father’s Name : Shri Ghanshyam Behari
Date of Birth : 30-11-1973
Marital Status : Maried
Gender : Male
Nationality : Indian

- I have by declared that the information give above in correct to the best of my knowledge.

Date : …………………….
Place : ……………………. (Kanhaiya Lal Tiwari)

[Unregistered]

NASEER AHMAD DAR
Email : naseer1518 AT gmail.com

Seeking assignments in Mechanical engineering & Management, to utilize my skills and abilities with a growth oriented organisation while being resourceful, innovative and flexible.

KEY SKILLS :
** Mechanical Engineering Graduate from Kashmir University in the year 2012.
** Having done various practical/industrial trainings during 4th,5t h &7th semesters.
** Visited Hydro-electric power project Ganderbal in 4th sem.& collected basic information.
** I undergo three months AutoCAD course in Govt. polytechnic Srinagar from 21/07/2011 to 20/10/2011.

PROFESSIONAL QUALIFICATION :
First class Bachelor’s Degree in Mechanical Engineering, in the year 2012 from University-(J&K).Kashmir

EDUCATIONAL QUALIFICATIONS :
10TH Class through JKBOSE with first division.
12th Class through JKBOSE with first division.
B.E through Kashmir University with first division.

WORK EXPERIENCE :
Work Experience :
** Presently undergoing one year Executive Training as OPERATIONS cum MAINTENANCE Engineer in NTPC UNCHAHAR. (From Oct. 2012 )

Job Profile :
Maintenance planning,inventory management,maintenance works supervision,shift scheduling,procurementing etc.
Maintenance of mills,compressors,blowers,pumps ,, screw ,rollers,bearing,workshop works etc.

SKILLS :
** AUTOCADD-2010 from Kashmir Government Polytechnic, Srinagar (J&K).
2-D Design & Drafting in Auto-cad 2010
** Undergoing a training of one year in NTPC as E.T.

PROJECTS HANDLED :
** Project : Improved Differential Gear Box
** Seminar delivered on Air suspenion

INDUSTRIAL TRAINING :
** I.C-Engine Parts & its working in Detail (From JAMKASH- Vechlides, Hyderpora, Srinagar (J&K).
** Lathe, Drilling &Milling Machines with their working in detail.(From Mechanical Engineering Department,Baramulla(J&K).

PERSONALITY TRAITS :
I am dynamic, confident, cheerful & disciplined person, extremely hard working & accept additional responsibility without hesitation. I don’t believe in looking back that what I have been, rather I concentrate in shaping the future. I am an enterprising person by nature, capable to decide devoted to the cause & the organizational aims & objectives. In the end, I would like to say that I have a strong urge to know new things & excel in life.

PERSONAL DETAILS :
Age : 24 years
Date of Birth : 02 MARCH 1988
Nationality : Indian
Gender : Male
Marital Status : Single

HOBBIES :
Surfing
Reading
Making new friends

NASEER AHMAD DAR