Resume CV : PDMS Piping Design Engineer

[rethukk]

Name : md shabbir hassan
Email : shabbirhassan84 AT gmail.com
Designation / Skillset : Piping Design Engineer(PDMS and CAESARII)
Subject : Application for the position of Piping Engineer

Dear Sir/Madam
I, undersigned, Mohd. Shabbir Hassan would like to apply for the post of Piping Engineer in your organization. I have a Bachelor Degree in Mechanical Engineering from Millia Institute Of Technology, Purnea, Bihar. Over the past two years of my career as a Piping Engineer, I have been employed at Axial Consultancy Pvt Ltd. In confidence, I can excel myself under your esteemed guidance and I will abide the rules and regulations of organization.
Herewith, I am enclosing my resume as the first step in exploring my possibilities of employment with your organization. I would like to meet you after your kind consideration. I look forward to the pleasure of hearing from you.

Thanking You
Yours Sincerely
Mohd. Shabbir Hassan

Resume :
OBJECTIVES :
- To employ my technical skills and positive attitude towards the engineering project design with continuous growth and knowledge and dignity in competitive and trustful environment.

SYNOPSIS :
- B. Tech (Mechanical Engineering) from Millia Institute of Technology ,Bihar in January 2008 with 72%.
DESIGN ENGINEERING :
Piping Design activities :
- Preparation of Equipment Modeling using Mechanical Data Sheet (M.D.S) in PDMS.
- Preparation of the Pipe Routing using P&ID.
- Pipe Routing without Fouling to any Structure.
- Nozzel Orientation and arrangement drawing preparation.
- Prepare & check isometric drawing’s MTO.
- Conversant with International codes and standards-ASME, AISI, ASTM, API.
- Knowledge of pipe rack calculation.
- Knowledge of pipe thickness calculation.
- Data consistency checking of the piping in PDMS.
- Preparation of the GAD using draft modeling in PDMS.
- Iso extraction using Iso draft module.

TOTAL WORK EXPERINCE : 3+ YEARS
EXPERIENCE SUMMARY :
- Currently working with Axial Piping, Delhi as Piping Design Engineer for
PDMS (Plant Design Management System software) (from November 2009 to till date)

SKILLS :
JOB RESPONSIBILITIES :
- Preparation of equipment modeling using M.D.S. in PDMS.
- Preparation of the pipe routing using P&ID.
- Pipe routing without fouling to any structure.
- Data consistency checking of a piping in PDMS.
- Checking of clashes of the pipes in PDMS.
- Preparation of the GAD using draft modeling in PDMS.
- 1yr 9months job experience in Ion Exchange Services Ltd ,New Delhi as

Shift Engineer :(Jan 2008–Oct 2009)
Company profile : Water Treatment plant (O&M)
Site : Maruti Suzuki Plant, Gurgaon
SKILLS :
JOB RESPONSIBILITIES :
- Knowledge of demineralization water plant.
- Knowledge of Sewage treatment plant (STP).
- Knowledge of Effluents treatment plant (ETP).
- Knowledge of Reverse osmosis plant (RO).
- Knowledge of Ultra filtration plant (UF).
- Maintain water tank chemical dosing tank.
- Maintain PH and Conductivity of the water as per company rules.
- All plant Operation.
- Daily maintenance report.
- Handling all plant operators.

COMPUTER LITERACY :
- PDMS
- CEASER-II

STRENGTHS :
- Able to work in stressful situation, keep to learning, friendly nature, self motivate and self initiated.

DECLARATION :
I hereby declare that the information furnished above is true to the best of my knowledge.

Date :
Place : Mohd. Shabbir Hassan

[akashmehrotra]

AKASH MEHROTRA
E-Mail: akashmehrotra.india AT gmail.com

Objective :
Seeking middle level assignments in Energy & Power Sector with a growth oriented organisation preferably in the Oil & Gas/Petrochemical/Power industry.

APERCU :
- A dynamic professional with over 2 year of experience in Designing & Modeling of Utility Piping , Rack Piping, and Product Piping, Steam Piping.
- Currently associated with Haskoning India Pvt. Ltd. (a Company of Royal Haskoning, The Netherlands), Noida as a Piping Engineer.
- Demonstrated abilities in devising design proposal for the client.
- Went for On-Job Training in The Netherlands for 3 months & done a complete project of Shell Orca & co-ordinate with Dutch Team on other projects as well like SASOL, Euro Tank.
- Knowledge of Pipe Rack Calculations, Pipe Sizing, Plot Plan.
- Familiar with Line List, Valve Data Sheet, Tank Farm Piping, Material Take Off.
- Familiar with International Design Codes like ASME, ASTM, DIN.

ORGANISATIONAL EXPERIENCE :
Sep’08 – To Date with Haskoning India Pvt. Ltd., Noida as Piping Engineer
Client 1 : VOPAK VLAARDINGAN-Tank Terminal & Project Distribution (The Netherlands)
Project : Vopak Area 6300 (Jan’10-To Dec’10)
Project involved Basic & Detail Designing of Process & Utility Lines for Automation of Tank Terminal in The Netherlands. The client was in Netherlands and it had to be a lot of co-ordination between India and Netherland office.

Activities Performed :
- Responsible for Designing & Modeling of Rack & Utility Piping including Support Design.
- Extraction of Isometrics.
- Design & Detailing of Standard & Special Supports.
- Checking of Isometrics in accordance with P&ID`s, Datasheets and Scope & Definition.
- Preparation for RFC package.

Project : Area 6000 (Sep’09-Dec’09)
Revamp Project consisting Basic & Detail Designing, Redesign & Automation for an existing Tank Terminal in The Netherlands.
Activities Performed :
- Responsible for Designing & Modeling of Product & Utility Piping including Support Design.
- Extraction of Isometrics using Isogen.
- Preparation of GAD’s.
- Detailing of Standard & Special Supports.
- Checking of Isometrics in accordance with P&ID`s, Datasheets and Scope & Definition.

Client 2 : SHELL- As-Built (The Netherlands)
Project : Shell Flare Gas ABC & KLM (Oct 10-To Date)
Project involved As-Built activities in accordance with Shell BBS 02.05.2039 drawing Standards in India.
ABC & KLM are two different sites of Shell.
Activities Performed :
- Preparation of As-Built drawings for Isometrics, Supporting, Pipe Support Book.
- Preparation of Piping Arrangements, EFD’s.
- Updating of PEFS (Raster CAD files) using Raster CAD.

Project : Shell Orca-Moerdijk (May 10-Aug’10)
Project involved As-Built activities in accordance with Shell BBS 02.05.2039 drawing Standards in India.
Activities Performed :
- Preparation of As-Built drawings for Isometrics, Supporting.
- Preparation of Piping Arrangements, EFD’s.

Project : Shell Orca-Pernis (Jul’09-Sep’09)
Project involved As-Built activities in accordance with Shell BBS 02.05.2039 drawing Standards in The Netherlands.
Activities Performed :
- Preparation of As-Built drawings for Isometrics, Supporting.
- Preparation of Piping Arrangements, Keyplan, Plot Plan.
- Preparation of Fire Fighting Sectional Drawings.

Client 3 : Schakou Chemicals (Jan’11-To-date)
Project is a rigorous training project & involved the Basic & Detail Design Concepts/Study of a Power Plant. Project is divided into parts & co-ordination with the Dutch Team.
Activities Performed :
Part 1 :-
- Plot Plan Study.
- Geographical Scheme Study.
- Pipe routing study.
Client 3 : Shinetsu (Oct’08-Apr’09)
Project is designed for training purpose & involved Basic Design Concepts & hands-on on the software used in the Company.

Activities Performed :
- Modeling of Equipment & Piping.
- Generation of 2D Layouts.

EDUCATIONAL CREDENTIALS :
2008 : B.Tech (Mechanical Engineering) from GLA Institute of Technology & Management, Mathura, affiliated to U.P. Technical University, Lucknow.
PROFESSIONAL TRAININGS
2009 : User level training from Bentley Institute in The Netherlands on AutoPlant XM (Piping, Equipment) & ProSteel.
2008 : PG Diploma in Piping Technology (Design & Engineering) from United Institute of Piping Technology, New Delhi (with packages PDMS 11.5 & CAESAR II).
2007 : Robotics Workshop (Basic Level) by IIT Mumbai.
2002 : C++.

SOFTWARE SKILLS :
- AutoPlant XM (Piping & Equipment), ProSteel 3D.
- NavisWork, AutoCAD 2007, Raster CAD.
- PDMS 11.5.

EXTRA CURRICULAR ACCOLADES :
- Participated in WCG-India (World Cyber Games) at New Delhi (2010).
- Participated in Entrepreneur Awareness Camp, Organized by Entrepreneurship Development Institute of India (EDI) in 2007.
- Participated in ROBOTICS Competition at IIT Kharagpur (2007).
- Participated in CYBER GAMES at IIT Kharagpur (2007).
- Active Member of College Organizing Committee.
- Active Member of Mechanical Society (YANTRIKI) of college.