Bureau Veritas Mumbai : Refinery Plant Piping Engineer

[Admin]

Bureau Veritas Mumbai : Refinery Plant Piping Engineer
Website : http://www.bureauveritas.co.in


Refinery & Plant Piping Engineer :

Job Description :
Shall have experience in designing of plant piping in refinery / Chemical Process Plant / Offshore
Platform etc and shall be familiar with latest editions of codes like ASME / ANSI B 31.1 / ANSI 31.3
etc and with Piping Stress software like Auto Pipe / Caeser II (5.2) / MathCad. Shall be familiar with
appraising the design of valves as per API 594,600,602,609 etc / ISO / BS EN standards.

Onshore / Offshore (or Submarine) Pipeline Engineer :

Job Description :
Shall have experience in designing of onshore pipeline (Trunk lines, Gathering lines, Flow lines etc)
and offshore / submarine pipelines as well as submarine Risers. Shall be familiar with DnV Rules
for submarine pipelines (1981) or latest editions / DnV RP E 305 / DnV RP B 401 with software
like Auto Pipe / Ceaser / MathCad.

Contact Us
Bureau Veritas
Phone : +91 22 66956300
Send an e-mail : hr@in.bureauveritas.com

[Admin]

1. Static Vessels Engineers :
Job Description :
Should be fully familiar with independently designing of pressure vessels including heat exchangers,
Tankages, Boilers as per the codes likeASME / ANSI / PED / API /TEMA /ISO /BS EN / IS / IBR etc
and software like PV Elite, NISA, ANSYS, FEM etc.

2. Civil / Structural Engineer (Onshore) :
Job Description :
Experience should clearly demonstrate having independently designed buildings or onshore facilities
using software like STAAD-PRO / NISA etc.


3. Structural Engineer (Offshore) :
Job Description :
Should be fully conversant with structural design of offshore platforms / facilities as per API RP 2A /
AISC / DnV Rules / Standards OS C 101 / 201 etc for Offshore structures with software like SACS /
MathCad and other latest techniques including designing of Risers. He shall be familiar with Static /
in place, Dynamic, Fatigue analyses, Load out /Transportation/ Installation analyses etc.

4. Rotating Equipment Engineer :
Job Description :
Experience shall have experience in designing of Pumps (Rotary & Reciprocating), as per latest
codes and standards like API 610 /674 / 675 / 676 / ISO 13709 etc and for Compressors (Rotary,
Screw & Reciprocating type) as per API 617 / 618 / 619 etc.

5. Civil / Structures Engineer :
Job Description :
Shall have experience in designing of Buildings /Structures, Bridges,Towers, Green Building
concept,Familiar with IS / ISO /BS EN/ DNV standards and software like StaadPro / Math Cad.

6. HSE Engineers :
Job Description :
Degree or Diploma in Mechanical/ Electrical/ civil engineering, and
Diploma in industrial safety from State Technical Board of Education (one year duration)
Experience : Should have worked in reputed organisation minimum 5 years of experience for
Degree Holder (minimum 7 years of experience for Diploma holders). Candidate should be well
versed with all the activities and operations carried out at site. He should be knowledgeable
about the equipments and machinery used at the site

7 Lead Auditors : (QMS.ISMS.CDM.OHSHAS,TS):
Job Description :
A Graduate in engineering Mech/Ele/Chem should have minimum 5 years of experience in
respective industry with auditing experience quality related aspects, lead auditors course and
training of 20 days is must.

8. Lead Auditors (TS) :
Job Description :
Graduate in engineering (Automobile), should have minimum 5 years of experience in respective industry with auditing experience quality related aspects, lead auditors course and training of 20 days is must.

9. Lead Auditors : (IRIS – International Railway Industry Standard):
Job Description :
A Graduate in engineering Mech/Elect; should have minimum 5 years of experience in an organization manufacturing railway signaling equipments.

10. Climate Change Verifier :
Job Description :
Graduate Engineers (Elect/ Mech/ Envir) with minimum 5 years of industrial experience with excellent analytical and reporting skills. Experience in Energy/ GHG will be an added advantage. The incumbent will be responsible for validation, verification, certification and registration of GHG reductions in accordance with the guidelines.

11. Head-Nuclear Power (Mumbai) :
Job Description :
Graduate engineer with more than 20 years experience in Nuclear power sector. Responsible
for proper co-ordination of all business line activities for the Business Development, Developing
new clients, Preparation and submission of quotations, review and execution of contracts
Ensure proper execution of all the contracts in terms of performance, reports (including
verify/review of inspection reports by other surveyors), invoicing, collection of payment, customer
feedback.Identifying and planning of training needs, resources requirements, etc.
The position calls for overall development of QA/QC and HSE services business with nuclear sector.
Retired professionals with good relevant experience can be considered.

12. Project Manager :
Job Description :
Graduate Engineers with 15-20 years of relevant experience in QA/ QC related to Project Management.
Will be responsible for overall project management, business development, resource development and Key Account Management.

[Guest-IJT]

CURRICULAM VITAE

SUBIR DAS
MAHAVIR NAGAR
BARMER MOB .07742092107
RAJASTHAN Ph.no.03561-220135

TOTAL EXPERIENCE : 9.1 years in Oil & gas construction field.

PRESENT SITUATION :
Working as a Lead Engineer [Mechanical] in Rajasthan Field Development Project (Crude Oil Extraction Project) under Cairn Energy India Pvt Ltd in Barmer (Rajasthan) with INDIAN OILTANKING LTD from Aug 2010. The major activities are execution of fabrication & erection of Steel Structural Rig Platform, Cellar Pit Platform & related structure.

WORKING EXPERIENCE

STEEL STRUCTURE
Have a thorough knowledge in
- Steel structural fabrication & erection of light, medium & heavy structure in large refinery, oil & gas terminal project.
- Surface preparation & protective coating as per Swedish (SA2.5) & others standard.
- Preparation of erection procedure plan, surface preparation & protective coating plan and thorough planning of daily erection activities with other related works.
- Checking field erection alignment like plumb of column, orientation of structure, leveling & other related procedures for field execution job as per international standard & project technical specification.
- Documentation related to fit-up & layout, weld visual of joint, surface preparation & protective coating, field inspection report, orientation & alignment report etc.
- Preparation of reconciliation statement of materials in monthly basis and after completion of work.
- Checking measurement of bills & extra activities changed as per site situation.

PIPING
Have a thorough knowledge in
- Fabrication & erection of CS piping of utility, process piping & fire water network system in refinery & crude oil terminal.
- Surface preparation & protective coating of large dia pipe (up to 76”) as per Indian & International standard.
- Checking spool piece fit-up as per isometric drawing, field & shop welding & alignment of piping
- Post-heating & Pre-heating up to76”CS piping.
- Hydro test of utility & process piping & air drying as per technical speciation.
- Documentation related to weekly material requirement, fit-up, weld visual.

TANKAGE
Have a thorough knowledge in
- FRV Tank testing like Vacuum test of bottom plate & rim plate, Hydro fill test, Rain water & Puncher test etc as per API650.
- Blasting & Protective coating of deck, shall & related structure as per technical specification.
- Pre-commissioning & final box up of tank.

PRE-COMMISSIONING & COMMISSIONING
Have a thorough knowledge in
- Identification of System-subsystems and chart encompassing all the relevant detail in consultation with Engineering Manager and prepare Project Commissioning Plan.
- Pre-commissioning & commissioning of Fire Water Network, utility & Process piping in product pump house & off site in refinery.
- Commissioning of Deluge Valve System & Sprinkler System in product pump house, oil& gas storage tank, loading gantry, Cable caller & control room.
- Conduct water, air & steam flushing, air drying, leak test & final box-up of utility & process piping system in refinery & terminals.
- Complete of job within completion period with proper safety.
- Liquidate all punch point related to utility & process piping system proposed by client & consultant through Format I to Format IV.
- Complete the pre-commissioning work within completion period with proper safety
- Coordinate with all other EPCCs during commissioning in large size refinery project (OSBL & ISBL).
PROJECTS HANDALED
1. Worked as a Project Engineer [Mechanical] in Off-site piping & Storage Facility with INDIAN OILTANKING LTD in Panipat Naphtha Cracker Project with Indian Oiltanking Ltd. From June2007 to August 2010.The main responsibilities wear steel structural fabrication & erection of 22000 MT pipe rack, loading & unloading gantry, main compressor house & relater documents. Including this pre-commissioning & commissioning of fire water network, utility & process piping, is also a major role in this project.
Client : Indian Oil corporation Ltd.
Consultant : Engineers India Ltd.

2. Worked as a project engineer (mechanical) in Baitalpur IOCL Depot.(UP) in FRV Tank project from Feb2007 to June 2007.The main responsibility was liquidation of punch point, Blasting & Protective coating of Dia 20mtr tank & related structure, conducting all tests like Hydro fill test, Rainwater test, Punchers test as per API650, final commissioning of tank, documentation.
Client : Indian Oil Corporation Ltd.

3. Worked as a Site Engineer (MEAHANICAL) in BAHADURGARH TERMINAL [Receiving Terminal] under Mundra-Delhi Pipeline Projects in Haryana with KNY Projects Pvt Ltd ( A 9001 Certified Project Management Consultant Co.) on behalf of Balmer&Lawrie Co Ltd (A GOVT of India Undertaken Co.) from Sep 2006 to Feb 2007. Construction of Steel structural Wagon loading gantry, Truck Filling Gantry, Calibration tower etc.
Client : Hindustan Petroleum Ltd
Consultant : MECON India Ltd.

4. Worked as a site engineer (Mechanical) in MUNDRA-DELHI PIPELINE PROJECTS [Dispatch Terminal] and CRUDE OIL STORAGE SYSTEM [IOCL] at Mundra [Gujarat] with KNY PROJECTS PVT LTD (A 9001 Certified Project Management Consultant Co.) on behalf of Balmer & Lawrie Co. Ltd (A GOVT of India Undertaken Co.) from Dec 2005 to Sep 2006. Responsible for steel structural fabrication & erection of fire water pump house, main product & bust up pump house & related structure.
Client : Hindustan Petroleum Ltd
Consultant : MECON India Ltd.


5. Worked as a Site Engineer with KAIZER CONSTRUCTION CO.LTD from Jan 2004 to Sep’ 2005. Structural fabrication & erection, drinking water pipe line erection was major activities.

6. Worked as a Production Executive in THE STATESMAN LTD (A National Daily) From Sep’2001 to Dec’2003, Siliguri. Preventive maintenance of rotary offset machine, 175 KVA DG set, 18 Kgf Compressor, documentation & daily production planning was major activities in this organization.

EXTRA ACTIVITIES :
1. Execution of Pilling work in DMC Process (Dia 450 mm, Depth-14 mtr.) was a major activity in Mundra Terminal Project, Gujarat.
2. Working experience on 30 days Shutdown Project in RFCC Unit (Panipat Refinery) as a Pre-commissioning Engineer.

EDUCATIONAL QUALIFICATION :
1. Passed Madhyamik Examination from West Bengal Board Of Secondary Education with 69.33% [1st Division] on 1996.
2. Passed Diploma in Mechanical Engineering from West Bengal Board Of Technical Education with 72.4% [1st Division] on 2001.
KNOWLEDGE IN COMPUTER : MS Word, MS Project, Excel, Internet.

INDUSTRIAL TRAINING :
1. Training on IN-PLANT TRAINING from N.S.I.C (GOVT Of India).including Tensile Testing in Universal Testing Machine, Hardness testing in Rockwell & Brinel Hardness Testing Machine, Heat Treatment of Ferrous Materials,& chemical analysis , many types of machining operations in Milling, lathe, Universal Boring, shaping m/c etc.
2. Training on Babcock and Wilcox Boiler from Jalpaiguri Govt. Polytechnic Institution.

ADDRESS : C/O S.C Das, Ashok Nagar, PO & DIST-Jalpaiguri;
West Bengal, PIN-735101

DATE OF BIRTH : 9th July 1979.

PRESENT SALARY : 5.3 Per Annul.

EXPECTED SALARY : Negotiable.

E-MAIL : subir_das79 AT rediffmail.com
arnoldkriss AT yahoo.co.in
PERSONALITY : I am a result focused man, who believes in my own strength , skills and roles while remaining flexible. Hard work and sincerity is inborn traits. I have good teamwork skills and find myself fit for team based organization.

SUBIR DAS.
Barmer, Rajasthan.

[Guest]

Mr.SANDEEP V. SUPARE
E-mail : sandipsupare AT yahoo.co.in
sandipsupare AT gmail.com
Career Objective :

Experienced Piping Engineer with Four years seeks position where skills and knowledge can be applied with an organization of high repute.
Work Experience :

A) : Presently working with “Petroleum Consulting Engineers (Mumbai) Pvt. Ltd”
Bhandup (W), Mumbai.
Designation : Piping Design Engineer
Location : Mumbai
Period : Oct. 2010 to till date.
Project : SHAYBAH GOSP-1.
Client : SAUDI ARABIAN OIL COMPANY (SAUDI ARAMCO)
Contractor : SNC Lavalin
Role : Worked as Piping design Engineer.
Key Accountabilities :
- Worked on proposal for piping.
- To prepare piping isometrics sketches as per plot plan and P&ID.
- MTO take off as per P&ID and piping material specification.
- Coordination activity between client and Design team.
- Planning of Job and work delegation to team.
- To control line list and PID.
- And responsible for final completion of job with in scheduled time.
Proposal Projects :
1) Resid Upgradation Project (Coker Heater Package) Client : Chennai Petroleum Corporation Ltd. Proposal for: Petron Engg. Construction Pvt. Ltd.
2) Coker & Naphtha Heater Package Client : Bharat Petroleum Corporation Ltd. Proposal for: Petron Engg. Construction Pvt. Ltd.
Key Accountabilities :

- MTO take off as per P&ID and piping material specification.
- To prepare piping isometrics sketches as per plot plan and P&ID for pipe and elbow.
- Study and Material take off for process line, decoking, fuel gas, fuel oil, snuffing steam, burner piping, utility, including skid piping.
- Documentation and planning of project.

B) : 8 Months working experience in “UHDE INDIA LTD.”, Vikhroli (W), Mumbai.
Duration of Work : From Feb- 2010 to Sep-2010.
Job Profile : Worked as a Piping Material Specification Engineer.
Project : NOCL EPCM A02+A04 Units.
Client : Nagarjuna Oil Corporation Limited. (NOCL)
Roles & Responsibilities :- To check piping material take off with respect to material Specification.
- Preparation of bill of material for costing. ( Intelligent Piping Bill of
material) according to P & ID.
- To controlling line list according to P & ID & documentation.
- To check technical bid analysis & deviations.

C) : 1 Year 2 Months working experience in “Shogun Engineers”,
MIDC Rabale, Navi Mumbai.
Duration of Work : From Dec 2008 to Jan. 2010.
Job Profile : Worked as a Technical Support & Quality Engineer.
Roles & Responsibilities: - To make Material Test Certificates according to mill TC.
- To make Final Dimensional Inspection Reports.
- To verify Material specification according to Shell Standards.
- NDT Test ( DP test only)
- Assist to Third Party Inspection.
- Verifying Purchaser’s & Vendor’s Technical enquiries.
- Co- ordination with Purchaser & Vendors.
- Dispatch of the order.
- Handling worker’s problems.

D): 1 Year 6 months working experience in “Param Construction Services”,
Nerul (w), Navi Mumbai.
Duration of Work: From June 2007 to Nov. 2008.
Job Profile: 1) Worked as a Trainee Site Engineer / Supervisor for 1 year at the
site of “Nuclear Power Corporation India Ltd”
At post: Kaiga, Tal - Mallapur, Dist-Karwar.(Karnataka).
2) Worked as a Quality Engineer for 6 months at the site of
“Reliance Industries Ltd”
At Post: Motikhabadi, Tal. : Lalpur, Dist: Jamnagar (Gujrat).
Roles & Responsibilities: - Checking of pipe line routing according to Drawing.
- Verifying Client’s Technical enquiries.
- NDT Test (DP test only).
- Co- ordination with Client & Vendors.
- Maintaining Fit up & Welding Reports.
- Maintaining NDT tests Reports.
- Drawing reading.
- Handling worker’s problems.

Technical Skills
-
- Knowledge of
- Generation of Isometric & Checking
- Pipe Rack Design
- Equipment & Piping Layout
- Cross Checking GAD with its P&ID and Piping Material Specification
- Zero Level MTO, Bulk MTO, Final Level MTO
- Plot Plan
- Tankform Design.
- Reading PFD, P&ID, Instrument hook-up drawings and Equipment datasheets.
Familiar with:
International codes like ASME, ASTM, API, BS, IS, Stresses, Material, PDMS (11.5),
CAESAR (5.0), SP PID (4.3), Microstation (7.0), AutoCAD 2008.

TRAINING PROGRAMMES :

Exposure to PDMS.
- Structure modeling
- Piping modeling.
- Equipment Modeling.
- Pipe support modeling.
- ISO - draft.
EDUCATIONAL QUALIFICATION :
Post Graduate Diploma
Completed Autonomous P.G. Diploma in Piping Technology (Design, Construction and Fabrication) with First Class at V.I.T. Pune during year 2006-2007.
- Bachelor of Chemical Engineering with Higher Second class from Pune University in 2005-
06.
- Diploma in Chemical Engineering with First class from MSBTE Board in 2003.
- H.S.C from Nagpur Board in 1999-00 with Second class.
- S.S.C. From Nagpur board in 1997-98 with First class.