www.bbunl.com Bharat Bhari Udyog Nigam Ltd Kolkata : Civil Engineer

[Admin]

Name of the Company : Bharat Bhari Udyog Nigam Ltd ( bbunl.com )
Location : Kolkata
Job Title : Civil Engineer

Job Details :
BBUNL is carrying out civil project jobs in West Bengal, Bihar, Tripura and also aboad. BBUNL also intends to be engaged in consultancy/ construction work for various other projects in the future. The Company requires the following personnel urgently for Kolkata HQ and Bihar project sites :

http://www.bbunl.com/careers.html

Senior Civil Engineer from Design Discipline :
Qualification : -Do-
Minimum Experience : 10 years

Civil Engineer ( Building) :
Qualification : Diploma in Civil Engineering
Minimum Experience : 3 years

Junior Site Engineer (Building) :
Qualification : -Do-
Minimum Experience : 3 years

Junior Engineer (Estimates) :
Qualification :
Minimum Experience : 3 years

All appointments will be contractual, with consolidated emolument of Rs. 30,000/- pm for Sl. 1, Rs. 20,000/- for Sl. 2 and Rs. 15,000/- for sl. 3 & 4. The Contract will be for a period of 2 (two) years.
The candidate at sl no. 1 should have atleast 5 years hands on experience in building design and 5 years in quality control/ construction and estimation of civil engineering structures viz. buildings in a PSU or reputed construction company. Sl. 2 and 3 should possess relevant experience in construction and quality control. Sl. 4 should have experience in quantity survey/ estimates in civil/ structural.

Eligible candidates having relevant experience may apply within 15 days to The Senior Manager (P&IR) on the above address. Age limit would be 45 years for Sl. 1 and 40 for others subject to relaxation for reserved category. Retired persons, below 63 years of age, having proven track record in the desired field may also apply.
Email : rrk@bbunl.com.

Address :
Bharat Bhari Udyog Nigam Ltd
26 Raja Santosh Road
Kolkata 700027
West Bengal, India

[Guest-IJT]

Curriculum Vitae
SANTOSH M. PANDYA
Add : Yamuna park,
opp. Chandan restaurant,
Chital road,
Amreli – 365601
Gujarat.
e-mail : santoshpandya_24595 AT yahoo.co.in
Phone : +91 2792 224595
+91 9879248004

Objective:
To obtain high level of excellence in the growth oriented organization and to utilize myself as a resource for all kind of challenging jobs by upgrading my knowledge and skills from time to time.

Personal Skills:
- Strong Communication, Interpersonal Learning & organizing skills.
- Strongly believes in Sincerity, Hard work and is eager to learn.
- Enthusiastic, Innovative & possess High Confidence level.
- Excellent team building and leadership skills.

Academic Qualifications:
Examination Board / University Year of
Passing Aggregate of
Marks (%)
B.E.
(Final year) North Maharashtra University 2008 73.21
Diploma in
Mechanical Eng. T.E.B. Gandhinagar,
Gujarat. 2005 68.24

Project Work:
- Paper Cup making machine in diploma.
- Worm wheel based inbuilt jack in degree.

Design Software Training:
- I have completed “DIPLOMA IN MECHANICAL CADD” from “CADD CENTRE” Training Services, Rajkot and “MASTER CAD” from “PARAS CAD/CAM/CAE”, Ahmedabad.

Computer Exposure:
Software’s : Pro/E., AutoCAD, M.S. Office.
Operating system : Windows 2000/XP/Vista.

Working Experience:
HARSHA ENGINEERS LTD., CHANGODAR, AHMEDABAD.
COMPANY PROFILE : HARSHA is a fast growing ISO 9002, QS 9000 and TS-16949 company in the field of Development & Manufacturing of Precision bearing cages having 1500 employee, more than 2500 million turnover and having collaboration with TIMKEN (USA) & one totally Export Oriented Unit.

- DURATION: 28 Aug. 2008 ~ till date
- DESIGNATION: Trainee Engineer in Design & Automation Department.

- JOB RESPONSIBILITY:
- Product Development using CAD software like Pro/E wildfire-3 and AutoCAD.
- Mold design for foundry.
- Create detail drawings & bill of material for designed part.
- Functional designing and reverse manufacturing.
- Approval Drawing Submission.
- Release work order by using SAP.
- Data uploading & data management by using Wind Chill (PDM Link).
- Coordination with tool room & shop floor.
- Control of Internal specifications related to R.M. & Product.
- Communication with customers & suppliers for Product related Technical matter.

Personal Details:
Name : Pandya Santosh Mahendrabhai
Father’s Name : Mahendrabhai H. Pandya
Category : Open
Date of Birth : 27 / 04 / 1984
Gender : Male
Marital Status : Married
Nationality : Indian
Passport Number : G9779670
Languages Known : English, Hindi & Gujarati.
Hobbies : Sports, Travelling and cooking.

I, Santosh Pandya, hereby declared that above written particulars are true to my knowledge & belief. I also consider myself familiar with Mechanical Engineering aspects & also confident about my ability to work successfully.

SANTOSH PANDYA

[Guest]

CURRICULAM VITAE
REDKAR DHIRAJ RAMESH.
Email id :- dhirajredkar AT yahoo.com
Objective :
Seeking a position to utilize my strong computer literacy, manufacturing operations, troubleshooting, warehouse, and quality control skills.
Professional Profile :
- Checking for diagonal, edge preparation, ovality, offset, long seam orination, alignment, and dry penetration. Nozzle orination & setup, hydro test, pneumatic test.
- Preparing & checking layout for hemispherical dish, torispherical dish, ellipsoidal dish, shell pad & saddle.
- Maintaining & aligning product material, total vessel inspection etc.
- Coordinating with third Party Inspection of vessel, the following client for which we conducted inspection is : DNV, ICS, GLIS, ABS, and GASTECH.
Technical Skills :
- Prepare technical reports and develop charts and graphs to show tested quality of a product.
Summary Of Skills :
Over 2 yrs of exp, I have acquired a wide range of skills through training, professional experience. The following list represents some of the major skills that I have developed over this period Quality Control, Product Manufacturing.
Work Experience :
SPARKLET ENGINEERS PVT.LTD, AMBARNATH.
Quality Control : Dec 2010 – Aug 2011
- Conducted Inspection : Condensate Tank ( 225 PSI)
Description : Designing Template. Diagonal checking, Developing Edge preparation, ovality checking, Dish layout setup, Dry penetration, Nozzle orination & setup checking. Test cases Hydro testing, pneumatic testing.
- Conducted Inspection : Oil Serv ( 2500 PSI)
Description : Designing Template. Diagonal checking, Developing Edge preparation, ovality checking, Dish layout setup, Dry penetration, Nozzle orination & setup checking. Test cases Hydro testing, pneumatic testing.
- Conducted Inspection : Bath Heater
Description : Diagonal checking, Developing Edge preparation, ovality checking, Dry penetration, Nozzle orination & setup checking. Test cases Hydro testing, pneumatic testing.
SPACETECH EQUIPMENT AND STRUCTURAL PVT.LTD, AMBARNATH.
Quality Control : Sept 2009 – Dec2010
- Conducting Inspection : Indian Oil Corporation Limited.
Description : Designing Template. Developing Diagonal checking, Edge preparation, ovality checking, Dish layout setup, Dry penetration, Nozzle orination & setup checking. Test cases Hydro testing, pneumatic testing.
- Conducted Inspection : Rama Petrochemical. (112 KL CO2 Tank).
Description : Designing Template. Diagonal checking, Developing Edge preparation, ovality checking, Dish layout setup, Dry penetration, Nozzle orination & setup checking. Test cases Hydro testing, pneumatic testing.
- Conducted Inspection : Monnet Ispat. (160 KL Gan Vessel).
Description : Designing Template. Diagonal checking, Developing Edge preparation, ovality checking, Dish layout setup, Dry penetration, Nozzle orination & setup checking. Test cases Hydro testing, pneumatic testing.
- Conducted Inspection : Monnet Ispat. (100 KL Gan Vessel).
Description : Designing Template. Diagonal checking, Developing Edge preparation, ovality checking, Dish layout setup, Dry penetration, Nozzle orination & setup checking. Test cases Hydro testing, pneumatic testing.
- Conducted Inspection : Air Liquid. (50 KL Tank).
Description : Designing Template. Diagonal checking, Developing Edge preparation, ovality checking, Dish layout setup, Dry penetration, Nozzle orination & setup checking. Test cases Hydro testing, pneumatic testing.
- Conducted Inspection: Air Liquid. (30 KL Tank).
Description: Designing Template. Diagonal checking, Developing Edge preparation, ovality checking, Dish layout setup, Dry penetration, Nozzle orination & setup checking. Test cases Hydro testing, pneumatic testing.
Education Qualification:
University Of Mumbai – BSc Physics (CHM College).
Other Certification:
Diploma in “Mechanical Draughtsman” from Industrial Institute (Thane).
Diploma in Auto Cad from Industrial Institute (Thane).
Diploma in Non Destructive Testing (Ghansoli).
Date:
Place: (DHIRAJ RAMESH REDKAR)