www.elecon.com EMTICI Elecon Engineering Ltd Chennai : DME B.E. Mechanical Service Engineer

[Admin]

EMTICI Elecon Engineering Ltd Chennai : DME B.E. Mechanical Service Engineer
Website : http://www.elecon.com
elecon.com

About us :
EMTICI Engineering Ltd., is the marketing and servicing company appointed for ELECON products in India.

All branches are equipped with exclusively trained application and after sales service engineers, who are keen to serve their clients and challenge any problem in the field of Power Transmission.

In view of a widely spread customer base across the country, we have more than 90 dealers and 30 resident engineers looking into daily requirements of clients.

Designation : SERVICE ENGINEER

Job Description :
Minimum 2 to 4 years in the field of Services of Engineering Equipment.

Desired Profile :
The caniddate must be DME or B.E. Mechanical with 2-4 years of experience in relevant industry.

Experience : 2 - 4 Years

Location : Chennai

Contact :
Mr. Akshay Bhatt
EMTICI Elecon Engineering Ltd
ANAND SOJITRA ROAD
ANAND,Gujarat,India 388120
Telephone : 91-2692-236505

CHENNAI :
Mr. S. Rajamani
EMTICI ENGINEERING LIMITED
553 Mount Road
East Coast Centre
3rd Floor, Post Box No. 1497
Teynampet
CHENNAI 600 018
Phone : (044) 24349237/24349497/24322455
Fax: (044) 24349643

[Guest]

CURRICULAM VITAE

SUBIR DAS
H.NO. 25,VIRAT NAGAR
MODEL TOWN , PANIPAT. MOB. 09991979893
HARYANA. Ph.no.03561220135
---------------------------------------------------------------------------------------------------------------------
TOTAL EXPERIENCE : 8.5 years in Oil & gas construction field.

PRESENT SITUATION:
Working as a Project Engineer [Mechanical] in NAPTHA CRAKER PROJECT under INDIAN OIL CORPORATION LTD in Panipat , Haryana with INDIAN OILTANKING LTD in Off-site & Storage Facilities (EPCC-8) from July2007.

RESPONSIBILITY:
- Execute Steel Structural Fabrication and Erection of Offsite Pipe Rack (appx. 22000 MT), Compressor House Gantry (60mts x 20 mts), Loading /Unloading Gantry.
- Surface preparation of material as per Swedish Standard (SA 2.5) & Primer application as per technical specification.
- Documentation related to Fit-up, Dimensional accuracy, Weld visual, Shot blasting & primer application ,Verticality of Columns , Field Welding & Painting Clearance.
- Checking measurement of Running Bills, Final Bills & Reconciliation of materials.
- Engineering support to ensure compliance with job specification.
- Co-ordinate with all disciplines of work and lease with site engineer as assigned for day to day activities.
- Verify and ensure all activities in the assigned area to compliance with technical specification, drawing & QA/QC procedure.
- Erection and alignment of Equipments like LP Air receiver, Pumps etc.
- Co-ordination with contractors, consultant & client.
- Execute all activities related to commissioning to offsite piping system like water flushing, air drying, leak test etc.
- Liquidate all punch point related to utility & process piping system proposed by client & contractor through Format I to Format IV.
- Identification of System-subsystems and chart encompassing all the relevant detail in consultation with Engineering Manager and prepare Project Commissioning Plan.
- Coordinate Commissioning Procedure preparation in consultation with Engineering Manager.
- Coordinate Commissioning Meetings with Client.
- Coordinate with all other EPCC during flashing & air drying in PNC project complex(OSBL & ISBL).
- Complete of job within completion period with proper safety.

WORK EXPERIENCE:
1.Worked as a Project Engineer [Mechanical] with INDIAN OILTANKING LTD at Baitalpur IOCL Depot. [UP] from Fab2007 to June 2007.
Key responsibilities were
- Execute FRV Tank erection ,including liquidate of punch point from client.
- Blasting and Painting , Documentation related to verticality of shell , vacuum test of bottom plate , puncher & rain water test of deck, hydro fill test of tank, pneumatic test of all pad plate etc.
- Structural Fabrication and Erection related to tank & tankfarm area.
- Final box up & commissioning of tank.

2. Worked as a Site Engineer (MEAHANICAL) in BAHADURGARH TERMINAL [Haryana] under Mundra-Delhi Pipeline Projects with KNY Projects Pvt Ltd ( A 9001 Certified Project Management Consultant Co.) on behalf of Balmer & Lawrie Co Ltd (A GOVT of India Undertaken Co.)from Sep 2006 to Feb 2007.
Key responsibilities were
- Execute Steel Structural Fabrication and Erection of Product Pump House , Tank Truck Filling Gantry, Tank Wagon Loading Gantry (960 mts long).
- Surface preparation of materials as per Swedish Standard (SA 2.5) and Primer application as per technical specification .
- Completion of the job as per scope, Measurement & certify the extra activities.
- Checking of RA Bills, Final Bills & reconciliation of materials.
- Documentation related to QA/QC.
- Clarify all problems in drawings & site position.
- Proper job planning to complete the job within completion period.
- Co-operation with Contractors & Client.

3. Worked as a site engineer(Mechanical) in MUNDRA-DELHI PIPELINE PROJECTS [HPCL] and CRUDE OIL STORAGE SYSTEM [IOCL] at Mundra [Gujarat] with KNY PROJECTS PVT LTD (A 9001 Certified Project Management Consultant Co.) on behalf of Balmer & Lawrie Co. Ltd (A GOVT of India Undertaken Co.)from Dec 2005 to Sep 2006.
Key responsibilities were
- Steel Structural Fabrication and Erection , Shot Blasting and Painting of Bust up pump house ,Fire Water Pump House ,Grease Drum Shade, Product Pump House etc.
- Documentation related to Fit-up, Dimensional accuracy, Weld visual, Shot blasting & primer application ,Verticality of Columns , Field Welding & Painting Clearance.
- Execute all activities related to CS piping system.
- Making Isometric drawing from GA.
- Preparing measurement sheet & reconciliation of materials.
- Checking of RA & final bill.
- Coordinate with Contractor , Consultant & Client.

4. Worked as a Site Engineer with KAIZER CONSTRUCTION CO.LTD from Jan 2004 to Sep 2005.
Key responsibilities were
- Steel Structural Fabrication and Erection , Shot Blasting and Painting of Industrial Shade (65X40 mts).
- Documentation related to structural work.
- Reconciliation of materials.
- Documentation related to QA/QC

5. Worked as a Production Executive in THE STATESMAN LTD (A National Daily) From Sep’2001 to Dec’2003,Siliguri.
Key responsibilities were
- Preventive maintenance of high speed rotary off-set machines, high pressure compressors [up to 18 kgf], DG set [up to 100 KVA] .
- Weekly Production Planning and Documentation .


EXTRA ACTIVITIES:

1. Execution of Piling work in DMC Process (Dia-450mm , Depth-14 mts.) was a major activity in MUNDRA TERMINAL PROJECT, Gujarat.

2. Working experience on one month Shut – Down Project in RFCC Unit (Panipat Refinery) as a commissioning Engineer.

EDUCATIONAL QUALIFICATION:
1. Passed Madhyamik Examination from West Bengal Board Of Secondary Education with 69.33% [1st Division] on 1996.
2. Passed Diploma in Mechanical Engineering from West Bengal Board Of Technical Education with 72.4% [1st Division] on 2001.

KNOWLEDGE IN COMPUTER: MS Word , Excel , Internet.

INDUSTRIAL TRAINING:
1. Training on IN-PLANT TRAINING from N.S.I.C (GOVT Of India).including Tensile Testing in Universal Testing Machine, Hardness testing in Rockwell & Brinel Hardness Testing Machine, Heat Treatment of Ferrous Materials,& chemical analysis , many types of machining operations in Milling, lathe, Universal Boring, shaping m/c etc.
2. Training on Babcock and Wilcox Boiler from Jalpaiguri Govt. Polytechnic Institution.


ADDRESS: C/O S.C Das ; South Ashok Nagar ; PO&DIST-Jalpaiguri ;
West Bengal;
PIN-735101.
Ph.No. 03561-220135[R]

DATE OF BIRTH: 9th July 1979.

PRESENT SALARY: 4.5 Per Annul.

EXPECTED SALARY: Negotiable.

E-MAIL: subir_das79 AT rediffmail.com

PERSONALITY: I am a result focused man , who believes in my own strength , skills and roles while remaining flexible. Hard work and sincerity is inborn traits. I have good teamwork skills and find myself fit for team based organization.

SUBIR DAS.
PANIPAT.

[Guest]

computer job
Basic
C
C++
java

[Guest]

RESUME
M. Umapathy,
E-mail : umapathy7mk AT yahoo.com

EDUCATION QULIFICATION
Passed out Diploma in Tool and Die making Elcot Hitech Chennai, with 1st class
Passed out I T I in Tool and Die Making Art Industrial School in Nazareth with 64%
Passed out the S.S.SL.C. Examination from Adithanar Govt High School in kayamoli with 68%
COMPUTER KNOWLEDGE
Ms Word and Ms-Excel
WORK EXPERIENCE
Sr. ENGINERR- PRODUCTION AND TOOLING in M/s Sharda (M) Industries Ltd, Mahindra Word City, Chengalpattu From August 08 To till date
Company profile : Manufactures of Mufflers and Heat Exhauster for Automotive organization. An ISO/TS 16949:2002 Certified company and Tier-1 Supplier to Hyundai Motor India
JOB RESPONSIBILITIES
- To handle all local and outstation suppliers
- To handle all new component developments
- Analyses the tooling Stoppage/ quantity maintaining for all tools
- Analyses rejection compound for reason wise
- Reduce tool cost/tooling stoppage
- Reduce the production cycle time / Rejection
- In-charge for 100workmen & reporting to GM Manufacturing
- Achieving production as per plan/dispatch
- Daily production planning & monitoring to meet production target (weekly/ monthly)
- To handle all shift man power arrangement
- Maintain Shop floor discipline
EXPOSURES
- New type Wiper Pad Interdiction
- New Cutting machine modification
- New Cutting Fixture making
- New Bending checker modification
- New type reduction tool/ expansion tool induction
Jr.ENGINNER TOOL ROOM in M/s Baliga lighting Equipments Pvt Limited
Kovilambakam Chennai 117, From March 2007 to July 2008
Company profile : manufacture of Explosion proof lighting equipment in India. An ISO 9001: 2000 certified Company
JOB RESPONSIBILITIES
- To handle local suppliers
- To handle all new component developments
- New drilling Fixture making
- Sunday/ Night Shift in-charge
- Reporting to d-gm
TRAINING in M/s TVS Sundaram Fasteners Limited Padi, Chennai 50.
From February 2005 to February 2006
Company profile : India’s largest manufacturer and exporter of High Tensile Fasteners,. First Indian company to be ISO 9000 certified. All operations are ISO 9000, IS 14001 & TS 16949 certified.
JOB RESPONSIBILITIES
- Make a Forging Fingers
- Ready for sun rise meeting report & reporting to Manger in tooling zap
- Embossing punch & die services
- Quality checking inspector in tooling z
DIE MAKER in M/s Sivnesan Group of company Gummidipoondy from December 2003 to January 2005
Company profile : manufacture in home appliances (Premier cookware) manufacture multi-product, multi-technology Group of companies manufacturing and marketing
High quality kitchenware under the brand name Premier.
- Developing new die
- Polishing die fixture make
- All dies Services/ New die make
- Die lapping
- To support marketing team for festival time
- To support production/ assembly team for mass production time
- Handle all tool room machine
MOULD MAINTENCER in M/s National poly plastic pvt limited guindy Chennai from November 2002 to September 2003
Company profile : manufacture of modular plastic furniture company. An ISO 9001: 2000 certified Company
- All Die Services
- Help with my supervisor

[Guest]

I am 3 yrs Diploma holder in Mechnical engineering having experience 12 above maintenance of automotive vehicles and construction equip/earthmoving/lifting equip. with SAP - PM In automotive & cross country pipeline construction co.
And seeking a chalanging job in INDIA or GULF which matching to my profile.
CV TITLE – Diploma in Mechanical Engineering with 12 years experience in Maintenance/Repair of Vehicles (automobiles) 08 years and 4 years in earthmoving equipments (oil& gas) with SAP- Preventive Maintenance (PM).
SAYED SALEEM ASHRAF JILANI
E-mail :- sayed_jilani2001 AT yahoo.com
Sub : Application for the post of Sr. Maintenance Engineer/workshop in charge (LMV & HEAVY) Earthmoving Equipment like-JCB, EXAVATOR,GRADER,DOZER,LOADER Lifting equip. CRAIN, PIPE LAYER etc.
Or SAP – PM CONSULTENT
CAREER OBJECTIVE
Willing to work with any organization where I can apply my professional skills aptitude and experience to the best of ability for study and mutual growth.
EDUCATIONAL QUALIFICATIONS
High School from U.P Board in 1991.
Intermediate from U.P Board in 1994
Graduation from Jamia Urdu Aligarh in 1999.
Graduation (BA private) from M.J.P Rohilkhand University, Bareilly in 2004.
PROFESSIONAL QUALIFICATION
Three year Diploma in Mechanical Engineering from School of Eng & Technology Meerut (U.P) .Approved by AICTE & Govt. of India, Recognized by state govt. with 67.1% (First Div) in 1997
Industrial Tour and Training.
Industrial Management, safety, House keeping in RANA STEEL MUZAFFERNAGER – U.P – INDIA.
Apprentice : - As a Trainee Engineer [Asst. Act Apprentice Diploma Mech. under Apprentice Act 1961.]
Duration - one year 1999-2000 In UP Irrigation Department Tube well Division.
Computer Skills
Knowledge in Microsoft office basic fundamentals, Net surfing & others basically.
SAP- PM (Preventive maintenance).
Work Experience Category A
Employer : JAIHIND PROJECTS LTD. www.jpl.co.in
Project Site : BCPL Plant – LEPATKATA Dist. DIBRUGARH ASSAM INDIA
BIRHAMPUTRA GAS CRACKER POLYMER LTD.
Date of joining : 1 Dec 2010
Resigned : Feb 2011
Focus Point Local Labor Union Politics, Loose management, Employee security ignore by employer and others problems.
Designation : Sr. Maintenance Engineer.
Job Description :
1. Responsible to ensure that fleet is repaired in time as per the priority laid down.
2. Allocation of suitable mechanics to undertake the repairs and also brief them on expected time of completion of repair
3. Study the Inspectors report and explain to the Mechanics before proceeding with the repairs
4. Monitor repairs closely and ensure special attention to critical and priority cases
5. Assesses the spares requirement and prepare requisition for submission to the spare parts stores taking into account the possibility of cannibalization/ fabrication for long delivery item
6. Close supervision of actual repairs and guiding the mechanics to ensure quality of repairs
7. Bring to the notice of Deputy Manager-Equipment cases of misuse/ neglect
8. Breakdown status / high cost repair/major technical fault and daily progress report bring to all concern.
9. On completion of all repairs, check the work done and produce the Equipment for "out" inspection. A thorough functional test is to be carried out before presenting to the Inspector for inspection
Previous Employer (GULF)
Employer : AL-TURKI ENTERPRISES (ATE) LLC RUWI MASCUT, SULTANATE OF OMAN

Project : RIMA¬-MAHA PIPE LINE PROJECT
CONTRACT NO C31/0604.OFF PLOT DELIVERY CONTRACT- NIMR/RIMA
Client : Petroleum Development Oman (PDO)
Position : Logistic Supervisor /Plant Engineer
Date of joining : 13 Oct 2008
Date of Leaving : 25 may 2009
Region of Leaving : Personal Family Problems and my Mother were having long term illness.
Employee ID No : 111230 Civil Card No. – 78350834
Project Job details :
The project deals with the installation of steam power plant, we are assigned for full fabrication & erection of Duplex Stainless steel pipelines.
RESPONSIBILITIES : All maintenance and vehicle ROP. And RAS procedures per Sultanate of Oman Third party inspection activities as per quality procedure follow with HSE policies. Preventive maintenance SAP – PM Module.
Handled a maintenance team 20-25 members including foremen and mechanics, technician, helpers with experience in the preventive and break down maintenance of all vehicles (LMV & Heavy)and earthmoving equipments plant machineries, EXAVETOR, Roller, Dozer, Grader EOT Cranes, and Fork lift Trucks and, vertical rotary surface grinders, welding machines, DG Set, Air compressors ,mixer ,compactors and other plant machineries.
Knowledge in Maintenance schedule, Periodic service, Spares and Store, inventory control, all certificates and important bills, challans. Service and parts manual, and total recording of vehicle and equipments, and others relative doc, with HSE Policies etc.
Supporting skill Material Management activities and store doc. like MRR, LPR, MIS, PO, MIR, CHALLANS, Others.
Past Previous Employer INDIA
Employer : Tehraan-Jonoob Jaihind consortium (A group of companies JAIHIND PROJECTS Ltd Ahemdabad)
Project Site : Dhabol- Panvel Pipe line (30’’) 172 km main gas pipe line.
Site Office Lonawala Dist. Pune Maharashtra India.
Client : GAS ATHORITY OF INDIA Ltd. (GAIL)
Consultant : Engineering India Ltd. (EIL)
Date of joining : 1 JAN 2007
Date of Leaving : 30 September. 2008
Region : Gulf selection
Designation : Mechanical Maintenance Engineer.
Nature of work
Leading a group of Foreman,- Supervisors and Technicians, mechanics, helpers with complete responsibility of all machines, vehicles, breakdown control, wastage and expenses control, Repairing/service/maintenance/recording of all vehicle and earthmoving equipments, lifting equip, and others, Inspection, and Trial. Official tours & traveling for spare purchasing work & M/C Repairing purpose.

Preparing- Detailed all location and Material (machining parts and others relative) list as per job, and proper co-ordination with client & HO.
Meeting Dead Lines, Estimation- & Costing, Spares Indenting, Reconciliation Of Materials, Preparing work schedule and estimation of Consumables, Tools and Tackles and arranging the same.
Work Experience (Home Business Self Management in INDIA)
Sarkaar Automobiles - (since June 2003) - A pvt. Car garage Diesel & Petrol vehicle workshop service & spare.
- A group of G.N. Spare Parts & Automobile Workshop
Designation : Service Manager
Date of joining : 11 June 2003
Date of leaving : Dec 2006
Location : Town -Chandpur, Dist. Bijnour (UP) INDIA
Job Description : Management
Associated with G.N. Parts with below responsibilities.
Specific Accountability:
i- Purchase of spare parts from Local Spare Parts Market at reasonable and confessional prizes due to bulk purchase and making rapport with spare parts dealers for credit purchase also.
ii- Forecasting of needs of stock & inventory for smooth functioning of day-to-day business activities.
iii - Supervision & taking care of day-to-day business activities related to workforce, finance, customer queries, profitability, and business of the company.
iv - Taking care of receipts, challans, and other important documents related to our trade.
v - Generating innovative ideas for growth of our business.
vi - Sale/Purchase of used cars in Local Market by giving advertisements, by displaying cars in front of our premises.
Generating references and taking care of customer satisfaction and making rapport with them.
Work Experience Category B (junior level in INDIA)
- BHARAT AUTOMOBILES (P) Ltd.
Designation : Work shop Supervisor/Service Advisor
Date of joining : Feb. 2000
Date of Leaving : 15 May 2003
Location : Civil Lines, Moradabad (UP) India.
Job Description : Repairing/servicing/stock of spares.

Acquainting the customer with different Vehicle companies/vehicle models of periodic service
Handling Corporate Clients.
Convincing the customers and facilitating the sales and service.
Giving presentation about the quality system.
Helps them in comparing our product (machining parts) with competitor’s product and making them realize that our product is better than others, and how it’s better than others.
Generating innovative ideas for the growth of the company.
Informing the customers about benefits of service time table as per manufacturer and how can do himself maintenance of their vehicle.
Reporting to the higher management about daily sales plans and sales report.
Establish rapport with customers and generating references from them.
4- Work Experience (junior level in INDIA)
- Sterling Motors (P) Ltd. KASHMIRI GATE NEW DELHI INDIA
Designation : Sales and Service Consultant
Date of joining : 01 Dec. 1997
Date of Leaving : 31 Jan 1999
Location : New Delhi - INDIA
Job Description : Sales and stock of spares.
Associated with above firm with below responsibilities
Sales of Auto spare parts, target achievement, marketing survey, order and delivery of automotive components, service advising, consultant, customer relation ,service card ,job card, Bills General repairing works records and others related activities etc

[Guest]

RESUME
S.SHEIK SADAM HUSSAIN.
E-mail ID : sadamsn AT gmail.com
Objective :
Recognize the need for and expect to engage in lifelong learning for continued effectiveness in the profession and apply that knowledge to the solution of practical and useful problems.
Educational Qualification
Course Year of Passing Marks Class
Diploma
In
Mechanical
Government of
TamilNadu DOTE 2009 71% First Class
S.S.L.C
2006 68% First Class
Technical Profile :
Applications : AutoCAD -2007.
Packages : MS Office.
- Diploma in MECHANICAL ENGINEERING, in M.I.E.T Polytechnic College, Trichy. Period 2006-2009, aggregate 71%.
- NDT- LEVEL II ASNT ( MT,PT,UT,RT )
EXPERIENCE :

Company Name : M/S FIVE STAR INDUSTRIES,
(AN ISO 9001-2008 COMPANY)
11/6-9,TRICHY-PUDUKKOTTAI ROAD, MATHUR.
Duration : MAY 01st 2009 TO TILL DATE
Designation : INSPECTION ENGINEER (NON – PRESURE PARTS)

JOB PROFILE :
- Checking the incoming materials (plate) for Fabrication.
- Verification of material documents and maintaining the records.
- Preparation of time plan for the projects and circulating between the departments.
- Job allocation as per the prepared schedule.
- Checking the finished job for final dimension.
- Coordinating with QC dept. for final inspection.
- Follow up with third party inspection until the release of the product.
Strength :
- Excellent Designing, Logical Thinking and Problem solving skills.
- Good Communication and Interpersonal skills.
- Good Team and Ability to work well under pressure.
- Quick Learner, Attitude to adopt new technologies and Environments.
- Positive attitude and perseverance to undertake any challenging tasks.
WORK EXPERIENCE :
Worked in FIVE STAR INDUSTRIES as an Inspection Engineer for M/S BHEL FABRICATION work in Heavy structural like,
* CEILING GIRDER
* BOX COLUMN
* PLUS COLUMN
* WIND BOX.
EXTRAS :

We are Inspect the Following Boiler’s like,
- North Chennai 600MW
- Barh 660MW
- Bara 660MW
- Krishna Patnam 800MW (India’s first Highest MW Boiler)

[Guest]

CURRICULAM VITAE
MANIKANDAN.I
e-mail :mani_manikandan111 AT yahoo.com
Career Objective
Seeking a position to utilize my skills and abilities in the industry that offers professional growth while being resourceful, innovative and flexible.
Personal Skills
Ability to solve more comprehensive problems and having the excellent written and verbal communication skills.
Educational Qualification
- Completed Diploma in Mechanical Engineering with 89% at Elumalai Polytechnic Collage, Villupuram. (2004-2007)
- Completed Higher Secondary Examination with 62.20% at Thiru Kamaraj Municipal Higher Secondary School, Villupuram. (2003-2004)
- Completed SSLC Examination with 72% at Thiru Kamaraj Municipal Higher Secondary School, Villupuram.(2001-2002)
Area of Interest
- Machine shop technology
- Manufacturing process
Personal Interest
Playing chess, cricket and listening to music.
Computer exposures
Application software : Auto cad-2000,pro-E. Experience
- One year trained in Board Of Apprentice Training in TamilNadu Electricity Board at Sathanur Dam Power Station,Sathanur,Tiruvannamalai.(2008-2009)
- Two years worked in ’S’-cam Brakes unit at Brakes India Limited, Polambakkam, Kancheepuram.(2009-2011)
Project title “SOLAR COOKER” -The Solar Cooker have a very relevant place in the present fuel consumption pattern. Flat plate box type design is the simplest of all the design. Maximum no load temperature with a single reflector reaches up to 160 degree Celsius.
Strengths
- Punctuality
- Positive attitude
- Self confidence
- Team work
Extra Curricular Activities
- Member in ISTE students chapter.
- Attended seminar in Mailam Engineering College.
- Secured second in drawing competition

[Guest]

RESUME
N.NISHANTH KUMAR,
Email :nishanthcumar AT gmail.com


Educational Background
Sl. No Course and Institution Month & year of passing % of marks
1 B.E, Electronics and Instrumentation.
Velammal Engineering College, Surapet,
Chennai – 600 066
May 2011 65.50

2 XII std
Nazareth Matriculation Higher Secondary School,
Avadi, Chennai-600054
April 2007
74.33
3 S.S.L.C
Nazareth Matriculation Higher Secondary School,
Avadi, Chennai-600054
April 2005
86.27
Areas of Interest
1 Industrial Automation.
2 Industrial Engineering.
3 Process Automation.

4 Plant Automation.

Co-curricular Activities
1 Designed robots like wired and wireless “Race Robot”, complicated
“Line Follower Robots".

2 Participated in technical and non technical events conducted by various
Colleges like NIT Trichy and VELTECH COLLEGE OF ENGINEERING,
Chennai.
Final Year Project
Tracking And Navigating Through Various Stations Using 8085
Microcontroller (Light Follower Robot).


Industrial Training
1 Industrial Training in PLC/SCADA in Cogent Cyber Solution, Chennai.
2 Industrial Training in Load cells in IPA Bengaluru.
Extra-curricular Activities
Participated in college cultural event and won 1st place in a group event “SKIT”.
Achievements
Won 1st place in Robotics at National Level Technical Symposium (Year 2010)
conducted at VELTECH ENGINEERING COLLEGE, Chennai.
Computer Literature
1 Languages : Basics of C, C++.
2 Softwares : PLC(Siemens, Allen Bradley, Omron, Delta),SCADA.

Hobbies
Listening Music, Playing Cricket.

[Guest]

Curriculum Vitae
B.SARATH KUMAR
Email : sarathmech48 AT gmail.com
Personal Statement
- Highly self motivated and goal oriented professional.
- To excel my true potential abilities in the given task.
- To upgrade my technical abilities by contributing my skills to needs of the
Company.
Continuing Education & Certifications

- Pro-E, UNITED CADD CENTRE, Tiruchengode, 2010 (SIX Months).
- ANSYS-10.0, UNITED CADD CENTRE, Tiruchengode, 2011 (SIX Months).
- AUTOCAD,MS-OFFICE
Education
- B.E (MECHANICAL), SENGUNTHAR ENGINEERING COLLEGE, TIRUCHENGODE, 2012. GPA : 93.8% OUT OF 100 UP TO 6th semester
________________________________________
- SSLC, Sri Renuga Devi Higher Secondary School, Palani 2006. GPA : 87.6 OUT OF 100.
- +2, Sri Renuga Devi Higher Secondary School, Palani, 2008. GPA : 83 OUT OF 100.
Honours & Activities
- Class topper award for all fours years of my degree.
- Students secretary for students youth red cross.
- Member of Society of Automotive Engineers.
- Member of Indian Society of Technical Education.
- Student’s president for department of mechanical engineering.
Related experience
- I have participated in 15 events including seminars conducted by various reputed colleges and won 11 prizes, of them 5 first prizes, 5 second prizes & 1 third prize.
- UNDERWENT INPLANT TRAINING IN TWO REPUTED COMPANIES
- BHARAT RADIATORS, TIRUCHENGODE.
- SORNAM HONDA, PALANI.
ACHEIVEMENTS IN OTHER COLLEGES
S.NO College Event Paper-title prize
1 ADHIYAMMAN Engineering College Paper presentation(ISTE-CHAPTER) Rotating Cylinder Valve Engine I
2 VELLAMAL Engineering College QUIZ - I
3 ADHIYAMMAN Engineering College QUIZ - I
4 SAVEETHA Engineering College POSTER PRESENTATION - I
5 ADHIYAMMAN Engineering College POSTER PRESENTATION - I
6 SAKTHI Engineering College QUIZ - I
7 PGP College of Engineering Cad modelling - I
8 SRM University-Chennai Paper presentation Electromagnetic suspension system II
9 BANNARIAMMAN Institute of Technology(BIT) Paper presentation Rotating Cylinder Valve Engine II
10 KARPAGAM Engineering College Paper presentation Electromagnetic suspension system II
11 KNOWLEDGE Institute of Technology Paper presentation Electromagnetic suspension system III
Project Details
- Semi automatic gear shifting(Mini Project)-OWN INNOVATION
- Reduction of failure in impeller in bell annealing furnace(steel Authority of India Limited)(Main Project)
Abilities & Strength
- Able to speak Tamil (mother tongue), English in a fluent manner.
- My parents are my strength and that too my weakness.
Declaration
I hereby declare that the above provided information’s are true to the best of my knowledge and taught.
PLACE : Palani YOURS TRULY
DATE : 03/05/2012 B.SARATH KUMAR