KENTZ QATAR : ELECTRICAL & POWER DISCIPLINE ENGINEER

[Admin]

KENTZ QATAR QATAR : SENIOR DISCIPLINE ENGINEER
Company Name: KENTZ QATAR
Company Location: QATAR
Designation of the vacancy: SENIOR DISCIPLINE ENGINEER
Company E-mail for contact: shabina@vcs.ae
Company Website: http://www.kentz.com

Details of the job:
ENGINEERING CANDIDATE PROFILE
SENIOR DISCIPLINE ENGINEER
(ELECTRICAL & POWER)
POSITION EP2

GENERAL REQUIREMENTS :
The candidate shall have a minimum of 10 to 15 years experience in the execution of EPC or turnkey
projects related to the Oil & Gas and/or Power Industry with both design office and site experience.
This is a senior discipline role and the candidate shall have extensive experience working in the field
of industrial Electrical & Power. The candidate shall have strong communication skills and technical
knowledge to support other discipline engineers within his department in the field of Electrical &
Power.
The candidate shall report directly to the Lead Discipline Electrical & Power Engineer.

MANDATORY REQUIREMENTS :
** Excellent speaking / writing knowledge of English language.
** Degree in electrical and power engineering.
** Self motivated.
** Middle East Experience.
** Computer literacy – must have excellent working knowledge of MS Excel and MS Word. Be able
to produce reports, specifications and calculation notes etc in a given agreed structured and
presentable format.
** Ability to work within a multi-discipline engineering team and to be able execute and co-ordinate
inter-discipline engineering checks.
** Must have ability to manage and co-ordinate a small group of engineers, designers and CAD
operators in relation to guiding, checking of technical quality and organising work activities to
meet projects / proposals deadlines.
** Good communication skills – be able to communicate proficiently with Clients, Contractors and
Vendors with regards to all electrical related activities on behalf of Company.
** Ability to execute all works inline with Client and Company HSE and QA policy & procedures.
** In-depth knowledge of principles / theory of power generation and power distribution.
** Working knowledge of electrical software packages such as ETAP or CYME etc.
** Ability to perform various electrical system studies such as short circuit, load flow, earthing, motor
starting, power factor correction and relay co-ordination.
** Ability to develop calculation notes covering generator sizing, transformer sizing, power
distribution networks, fault studies, CT/PT sizing, protection setting calculations & relay coordination,
earthing, cable sizing, lighting lux levels, small power distribution etc from first
principles.
** Sound understanding of IEC electrical standards requirements.
** Ability to develop technical procurement specifications for generators, LV/MV/HV motors,
LV/MV/HV switchboards, electrical protection, cables and electrical building services equipment /
materials.
** Ability to carry out technical evaluations / adjudications / vendor document review & approvals of
electrical capital equipment, electrical building services equipment and bulk materials.
** Ability to prepare single line diagrams, define protection / interlocks / controls for LV/MV/HV
systems.
** Ability to prepare layouts of electrical equipment and associated cable routing & earthing plot
plans, cable schedules and interconnection wiring diagrams.
** Good experience in development of control schematics, control philosophy and motor staring
methods for both LV/MV/HV motors.
** Sound appreciation and ability to understand and co-ordinate the engineering & design interfaces
with other disciplines such as process, mechanical & piping, civil & structural, instrumentation &
controls and telecommunications.
** Experience in Vendor factory acceptance testing (FAT) of capital electrical equipment such as
generators, switchboards, transformers, UPS systems etc.
** Good site experience of site technical support in terms of construction mechanical completion and
technical pre-commissioning support to site construction / commissioning teams.

PREFERENTIAL REQUIREMENTS
** Certification for extra high voltage systems.
** Experience of SHELL DEP and / or BP standards.

[Guest]

Dear Sir,


I the undersigned would like to offer my service in your esteemed organization as "Electrical Engineer" for your kind information and consideration. Now i am in qatar working as a Electrical Engineer in Integrated Qatar.hope that i am suitable for the post and fetch me an opportunity to work under your control. If given a chance to work, I can assure you, sir that I will discharge all my duties entrusted to me from time to time to the entire satisfaction of my superiors.Thanking you in anticipation and hope to receive a favourable reply.
Yours faithfully
Favas KV

[Guest]

DELOS SANTOS, LLOYD C.
E-mail address : delossantos_lloyd06 AT yahoo.com
Position Desired :
Electrical Engineer
Job Objective :
To serve in an reputable organization, one that encourages human resource development and provide opportunities for career growth and advancement, where I could improve and apply my natural talents and acquired skills to be able to serve efficiently and effectively.
Educational Background :
Tertiary Education
Bataan Heroes Memorial College
Roman Super Highway, City of Balanga Bataan
Bachelor of Science in Electrical Engineering 2003-2009
Secondary Education
Sta Cruz, Academy
Sta Cruz Lubao,Pampanga 1999-2003
Primary Education
Sta Cruz,Academy
Sta Cruz Lubao,Pampanga 1992-1999
WORK EXPERIENCES :
- Peninsula Electric Cooperative,Inc (PENELCO)
- (Balanga City,Bataan)
- Position : Electrical Technician
- July 10 2008,October 7, 2009
- DUTIES AND RESPONSIBILITIES
- Assists the Utilities Supervisor in developing and implementing operational and
functional related electrical procedures to ensure operational efficiency of the Utilities
facilities
- Monitors and maintains the operational efficiency of all electrical distribution systems
associated with the Utilities facilities through operational analysis to ensure optimum
performance. Reports operational and functional problems to Utilities Supervisor and
carries out remedial action under direction.
Assists in the development and implementation of preventive maintenance programs
for all electrical distribution systems equipment to ensure operational effectiveness and
preserve COMPANY assets.
Maintains HV and LV switchgear, transformers and associated control systems to
ensure operational efficiency.
Operates the electrical generation and distribution systems to ensure a continuous
energy supply. Provides electrical maintenance support to the main process plant as
required by operations.
- DAELIM PHILIPPINES INC
- (Limay,Bataan,Philippines)
- Position : Cadet Electrical Engineer (Maintenance)
- April 28, 2010 – January 28, 2011
- Assign in Petron Bataan Refinery Petro FCC Revamping & BTX Project in (Limay Bataan)
- Exposed in LV,MV,HV power distribution (Transformer, switch gear ,switchrack & Power Panels
- Preventive Maintenance in all power & Electrical Instruments
- WELLTECH SERVICE CORPORATION. (Instrumentation & Calibration Services)
- (604 Shaw Blvd, Wack-Wack Green Hills East, Mandaluyong City)
- Date : From February 28,2011 until present
- Position : Technical Representative
- DUTIES AND RESPONSIBILITIES
- Assign in In-House maintenance calibration in San Miguel Brewery Inc.
- In Packaging Area of Loop Process of Temperature Controllers, I/P Transducer
- Differential Pressure Transmitters and other various instruments
- Using Multi function calibrator MC5,Honeywell Hart Communicator and other standards instruments used for calibrations
- (Quebiawan City of San Fernando, Pampanga)
- Assign in field calibration in Ginebra San Miguel Inc.
- for the calibration of relief valves, pressure, temperature gauges magnahuelig gauges.
- Using MC2,MC3 multi function calibrator
- (Supply Chain Operation Cabuyao, Laguna)
- Maintains effective verbal and written communication with costumers.
- Accomplishes job task as per schedule and other related task assigned by immediate supervisor.
- Work effectively with other personnel and staffs
Certification Course :
Industrial Electrician
(MFI) MERALCO Technological Institute
Ortigas Avenue Extension, Pasig City

- Measure electrical parameters using electrical instruments.
- Connect electric circuits and machines using a diagram.
- Troubleshoot electrical circuits.
- Connect circuits involving single-phase and three- phase connections.
- Measure electrical parameters using different electrical instruments.
- Interpret electrical plans.
- Connect different types of motors.
Building Wiring Installation & Maintenance
(MFI) MERALCO Technological Institute
Ortigas Avenue Extension, Pasig City
- Measure electrical parameters using electrical instruments.
- Interpret electrical blueprints.
- Troubleshoot light and power circuit.
- Connect lighting circuits using different switching configurations.
- Troubleshoot lighting and power circuits using basic electrical measuring instruments.
- Interpret electrical plans.
- Determine the required conductor sizes and protection requirement for a certain load.
- Install wiring systems using different raceway methods.
Advance Industrial Motor Control
(MFI) MERALCO Technological Institute
Ortigas Avenue Extension, Pasig City
- Troubleshoot electrical control circuits.
- Design motor control circuits.
- Connect motor connections.
- Troubleshoot electric motors.
- Interpret electrical control diagrams.
- Connect electrical/motor control diagrams.
- Troubleshoot electrical/motor control circuits.
- Design electrical control circuit.
- Connect and program variable frequency drive.
- Connect and program Programmable Logic Controllers.
Electro-Pneumatics
(MFI) MERALCO Technological Institute
Ortigas Avenue Extension, Pasig City
- Define an electro-pneumatic system.
- Identify the parts of an electro-pneumatic control chain.
- Differentiate the working media and control media in an electro pneumatic system.
- Operate a pneumatic regulator properly.
- Represent solenoid valves correctly.
- Select and use the appropriate type of switch for a control application.
- Apply relays and timers in an electro-pneumatic system.
- Select and apply the appropriate pneumatic cylinder.
Calibration for Process Instrumentation
(MFI) MERALCO Technological Institute
Ortigas Avenue Extension, Pasig City
- Define and enumerate measurement concepts and terminology.
- Apply ISO 9000 to Plant Maintenance, Safety and Quality Assurance.
- Assist in the installation of Industrial Telemetry system.
- Calibrate common industrial process instruments.
- Appreciate the relevance of ISO 9000 standards to maintenance practices and procedures.
- Use wiring drawings, schematic installation detail drawings and loop drawings using ISA-P&ID standard symbols.
- Select and operate test and calibration equipment.
- Hook-up, test and calibrate typical process gages, indicators, converters and transmitters.
- Employ proper safety practices during installation, pullout, calibration and maintenance of instrument.
Member :
Institute of Integrated Electrical Engineers
(IIEE)
Philippine Instrumentation and Control Society
(PICS)
Technical Skills :
Software :
Microsoft Word
Power Point
Knowledgeable in the internet
Driving skills
Seminars :
Global Partner In Electric Power And Reform
Advocacies
(IIEE) 30th & 31th day of August 2007
Responding to Global Safety, Energy Efficiency
And Environment Protection
(IIEE) 12 th day of September 2008
Knowing Windmill Power Plant Energy
(IIEE) 12th day of September 2008
Sensor Technology
1st Step to Mechatronics
(SISTEMATIC & SIEMENS)
03th day of October 2008
Work-Shop Seminar on Temperature,
Pressure, Electrical Calibration

[Guest]

I am looking for the chance of Electrical Superintenent and attaching my CV herewith please give me arely even if it is positive.
Thanks
CHACKO J. KUTTY
Email :cjacobkutty9 AT gmail.com,cjkutty AT hotmail.com

Presently working in Bahrain :
A seasoned Electrical Engineer offering over 24 years and 06 months of experience in managing electrical work of Petrochemical, Oil & Gas, Gas plants, Refinary,GOSP,Pump stations, Well manifolds, Dehydration units, and Power Plants,Aluminium Smelters, across Middle East & Africa. Having solid experience in Electrical installation jobs in Oil Gas construction projects seeking assignments as;
Electrical Superintendant/Supervisor
PETROCHEMICAL / OIL & GAS / CONSTRUCTION PROJECTS (INSTALLATION/COMMISSIONING)
PROFESSIONAL SUMMARY :
1 Extensive experience in Installation of Transformers, Generators, Switch gear Panels, Motor Control Centers, and UPS Systems, Switchyard Equipments.
2 Successful installation of Cable Trays, Conduits, Cable lying, Glancing and Termination of HV, LV, and Control Cables.
3 Involved in Grounding Systems, Cathodic Protection Systems.
4 Systematically planned and executed set-up of Industrial and Domestic Wiring, Lighting systems.
5 Managed Foundation Heating Systems, Air Handling Units, Motors, Pumps, Blowers, and Motor Operated Valves.
6 Handled repairing of Air conditioners, Refrigerators, Pumps, motors, Kitchen equipments, Laundry equipments Preventive Maintenance of Electrical equipments.
7 Lead a qualified technical team and achieved scheduled completion of the projects.
8 Ensured completion of project activities on schedule by using advanced planning and progress, material tracking.
9 Provided the required managerial and technical support / guidance to subordinate enabling them to achieve their work targets smoothly.
10 Excellent organizational, interpersonal, communication, critical thinking and problem solving skills.
11 Proven ability to work independently as well as part of a team.

AREAS OF EXPERTISE :
1 Safety Meetings and Tool Box Talks
2 Strong background in power distribution with transformers and switchgears
3 Experience in heavy Industrial construction projects
4 Monitoring and supervising large work force in a fast track project environment
5 Scheduling scope of work as per the site requirements
6 Obtaining work permit
7 Applies the necessary measures to ensure that projects, program, quality, specifications, HSE and integrity are all in place, monitored and controlled.
8 Schedules and supervises day to day project activities to ensure the proper utilization manpower and materials.
9 Reviews and plans future project activities considering tools, equipments, resourses and material availability.
10 Ensuring safe environment in working area
11 In-depth understanding of Electrical drawings
12 Cross-department coordination
13 Classifying hazardous areas
14 Technology Implementation
15 Computer Proficiency in MS Office and internet application
CLIENTS & CONSULTANTS WORKED WITH
1 Ministry of Health, Saudi Arabian Oil Company (KSA)
2 Petroleum Development of Oman
3 Sultan Quaboos University, Oman
4 Canadian Oxy, Republic of Yemen
5 Winter Shal,AGCO Oil Company, AGIP Oil Company, Libya
6 Bechtel, Bahrain
7 Ras Gas,JGC / Dolphin Energy
Raslaffan, Qatar
8 SPGC/ GS E&C,Iran
9 KEMPE Engineering services Ltd,
(Qatalum Project)
PO Box 23994, Doha, Qatar.
10 Bechtel Angola,LNG Angola
11 Tatweer Petroleum,Kingdom of Bahrain

WORK EXPERIENCE :
BAHRAIN SPECIAL TECHNICAL SERVICES,KINGDOM OF BAHRAIN
Sr. Supervisor.E&I (Mar2012 to till date)
Work Outline : Electrical & Instrumentation Installation activities of Well manifolds,GDU,Pumpstations,Tank Batteries in Tatweer Petroleum Oil field
BECTEL OIL GAS & CHEMICALS ANGOLA LNG PROJECT
ANGOLA, SUOTH AFRICA.
Electrical Supervisor (Apr 2010 to Jan 2011)
Work Outline : Supervision and control the Electrical activities in the Sub-Station and Compressor (Installation of Panels, cable ladders, cable trays, conduits, Cable laying, Glanding, Termination of power &control
Cables, Installation of lighting systems and Grounding systems, Loop checking and
Continuity testing, Meggering Etc.)
KEMPE ENGINEERING SERVICES LTD (AUSTRALIA)
POBOX 23994,DOHA,QATAR.
Electrical Supervisor(Mar 2009 toOct 2009)
Work Outline : Supervision of Installation, Testing,Pre-commissioning of equipments,Panels and loop testing of PLC Controls, Testing of motors and drives Etc.
GS E&C, SOUTH PARS GAS FIELD DEVELOPMENT PHASES 9&10,
ASSALUYEH, ISLAMIC REPUBLIC OF IRAN
Electrical Supervisor ;(Jun 2008 to Dec 2008)
Work Outline : Commissioning activities of 33kva Sub-Station and Utility area (Boilers, Nitrogen Package, Desalination plant, Wastewater treatment system, Firefighting system, cathodic protection systems Etc)
COMSIP - CEGELEC, BAHRAIN
Electrical Supervisor; (Jul 2004 to oct 2007)
Work Outline : Construction of Aluminum Plant - Electrical installation for Storage Tanks, Electrical Installation of Oil & Gas construction Projects
(Successfully completed 2 11 KV Sub-Stations in Alba Aluminum Line 5 expansion project and 11 KV Sub-Station in Dolphin Energy, Raslaffan, Qatar).
J & P OVERSEAS LTD, LIBYA
Electrical Supervisor; (Oct 2000 to Apr 2004)
Work Outline : Construction Installation activities of GOSP, STP, switchyard (132 KVA) Water treatment facilities, and Well pads,Supervised the construction and execution work of a 132 KVA sub-station and switch yard with Ajip Oil Company in Elephant field petroleum refinery project.
FAFCO, KINGDOM OF SAUDI ARABIA
Electric Foreman; (Mar 1995 to Jan 1999)
Work Outline : Construction Installation activities of Petrochemical - Projects, Gas plants, Control System Upgrading (DCS)
CCIC, REPUBLIC OF YEMEN
Electrical Foreman; (Apr 1993 to Jan 1995)
Work Outline : Construction of Petrochemical- Projects, Power plants, Substations, Pump house and Gathering stations
AVCO OVERSEAS AL DARAB, S OF OMAN
Electrical Fore man, Jan 1989 to Dec 1992
Work Outline : Operation and maintenance University, Sports complexes
MTSCO,RIYADH.
Elect : Technician (Nov 1982 to Aug 1988)
Work Outline : Installation, Commissioning, Testing and Maintenance of Hospital Equipments

EDUCATIONAL QUALIFICATION :
Diploma in Electrical Engineering
PERSONAL DETAILS :
Date of Birth : 14th December 1958 -
Place of Birth : Kerala, India
Religion :Christian
Pass port No : G 8321819
Place of issue : Cochin
Date of issue : 02/04/2008
Date of expiry :01/04/2018
Languages known : English, Hindi, Malayalam
Driving License : Indian, Bahrain