Chhattisgarh State Power Holding Company Ltd Recruitment 2010 : Mechanical, Instrumentation, Chemist Engineer

[Admin]

Chhattisgarh State Power Holding Company Limited (CSPHCL)
(A Chhattisgarh Govt. Unidertaking) (A successor of CSEB)
Dangania, Raipur - 492013, Chhattisgarh
Raipur: Dt. 8-4-2010

Chhattisgarh StatePower Holding Company Limited (CSPHCL) invites application from the young and dynamic Indian National candidates for the following post :

Assistant Engineer : 227 posts
(Mechanical/Production-48, Electrical/ Electrical & Electronics/ Electrical - Instrumentation -111, Electronics/ Electronics & Telecommunication/ Electronics & Instrumentation-15, Civil-35, Computer Science - 9, IT - 9),
Pay Scale : Rs. 20425- 48400/-,
Qualification : Engg/ Tech degree in concerned branch. Final year candidates can also apply,
Age : 18-30 years. Relaxation as per rules.

Shift Chemist : 10 posts,
Pay Scale : Rs..20425- 48400/-,
Qualification : M.Sc. (Chemistry) with 65% marks,
Age : 18-30 years. Relaxation as per rules.

Junior Engineer : 304 posts
(Mechanical/Production-27, Electrical/ Electrical & Electronics/ Electrical - Instrumentation -175, Electronics/ Electronics & Telecommunication/ Electronics & Instrumentation-16, Civil-62, Computer Science - 12, IT - 12),
Pay Scale : Rs.20425- 48400/-,

Qualification :
BE/B.Tech./B.Sc(Engg.) /AMIE in Mechanical/ Electrical/Electronics/Civil/Computer Science/Information Technology from any recognized University/Institution (Approved by AICTE). In case of Electrical Engineering the other degree "Electrical & Electronics"/"Electrical Instrumentation" will be considered at par of Electrical. Similarly in case of Mechanical Engineering, the degree of “Production Engineering” will also be considered equivalent to Mechanical. In case of Electronics Engineering, “Electronics & Telecommunication”/ “Electronics & Instrumentation” will also be considered at par of Electronics.

Age : 18-35 years.

How to apply :
(i) Last date of submission : The application in the prescribed format should reach to following Address:- "Addl.General Manager(HR), CSPHCL, Dangania, Raipur PIN - 492 013" positively by 31.05.2010. The applications received by registered post or speed post will only accepted. Applications by hand /courier/any other post will not be accepted. Envelope should be clearly super scribed as "Application for the post of A.E. or Shift Chemist".

(ii) Application fee : Rs. 500/- for General , OBC category & SC/ST category candidates of other than Chhattisgarh State AND Rs. 200/- for SC/ST category candidates of Chhattisgarh State in form of non-refundable D.D./Banker's cheque in favour of "Assistant Manager (CAU), CSPHCL, Raipur" payable at Raipur (Chhattisgarh). The candidates should write their name/post applied and complete mailing address on reverse side of D.D.

(iii) Exemption from application fee : departmental Candidates.

(iv) Other conditions : The SC/ST/OBC candidates of CG state are required to submit permanent caste certificate along with the caste verification certificate issued (issued on or before the last date of submission of application) by the High Power Caste Scrutiny Committee, constituted for scrutiny of caste certificate with the application, failing which the application shall not be considered.

For more details :
http://www.cseb.gov.in/csphcl/recrui...ecruitment.htm

http://www.cseb.gov.in/csphcl/recrui...%20Chemist.pdf

[prajapatinikul]

PRAJAPATI NIKULKUMAR RAMANBHAI
At & Post-Mobha, Ta-Padra, Di-Vadodara-391430
Contact: 09898137331; (02662) 242312; Email: prajapatinikul AT yahoo.co.in
________________________________________ELECTRICAL OPERATIONS & MAINTENANCE ENGINEER
Seeking challenging assignments across the industry
________________________________________PROFILE

Technically competent Electrical engineer with 5 years of career success in managing operation, maintenance, reliability, project and process management of electrical equipments
Currently spearheading as Maintenance Engineer with BARODA EQUIPMENT & VESSELS LTD
Demonstrated competencies in implementing preventive, planned and predictive maintenance to maximize operational availability of equipments. Capable of conducting root cause analysis to evolve quick breakdown solutions
Proficient in introducing electrical modifications and process improvements to optimize operational efficiency of equipments like AC Motors, Transformers, MCC & PCC, HT controls Panel
Ability to use sound judgment, decision-making skills and thrive in a deadline intensive environment, multi-task, perform under pressure and meet deadlines. Strong leader & team builder with proven ability to motivate team members towards achieving production targets
________________________________________PROFESSIONAL EXPERIENCE

BARODA EQUIPMENT & VESSELS LTD since Aug 09
Maintenance Engineer

Proactively identifying areas of obstruction/breakdowns and taking corrective measures / steps to rectify the equipments through application of trouble shooting tools
Performing root-cause analysis of defects while developing & improving the processing by taking corrective actions to prevent any reoccurrences and defective issues
Accountable for Undertaking preventive maintenance and scheduling tasks to maximize operational availability of equipments and reduce machine breakdown
Deftly involved in commissioning of Blasting Booth, 32T EOT Crane
Handling troubleshooting and Maintenance Work of Radial Drilling M/c, Sharing M/c, Hydraulic PressBreak, Vertical Plate Bender, Compressors, inverter welding machine which are IGBT based, Rectifier welding m/c, SAW Welding m/c, Plasma machine and also of all kind of EOT crane use in our engg. Production( 32T,5T,6T)
Accountable for operation and maintenance of HT & LT Switchgears, Transformer and Distribution system, High Power Motor and also all kind of starter used for motors
Operation and Troubleshooting of Variable Frequency Drives used for Air Blower, Vacuum Blower, Cranes and M/c’s main drive motor
Co-Ordination with various dept like production, maintenance, purchase, store, with site engineers, with contractors / Vendors
Carry out routine repairs and overhauling of equipments to keep them in good working condition.
Conducting failure analysis and resolving breakdown issues quickly
Contributing significantly in generating energy savings by ensuring observance of correct operational parameters

CROMPTON GREAVES LTD Jan 07-Aug 09
Junior Engineer

Accountable for overall shift administration, monitoring and controlling of Power Plant’s associated equipments
Authorized to Operate Load Shedding Scheme either manually or automatically as per system requirement to avoid blackout
Hands on experience in Preventive and Breakdown Maintenance of all Machine used in manufacturing process of FTL,GLS,CFL and HID Lamp production like Coating machine, Shell Washing Machine, Sintring Furnace, wipping unit, Sealing Machine, Exhaust Machine, Cap filler machine Capping machine, Ageing Conveyor, Testing Conveyor, Packing Machine, Cutting Machine, Bending Machine, Vacuume Pump
Involved in planning and executive preventive maintenance shutdown maintenance and break down maintenance
Accountable for Operation and Troubleshooting of Variable Frequency Drives used for Air Blower, Vacuum Blower and M/c’s main drive motor, 11 KV Switch yard
Handled all types of industrial lighting maintenance and proper lighting load distribution
Partially involved in operation and maintenance of 1.2 MW captive power plant & troubleshooting of PLC panel like from input sensor to output valve/motor/coil etc and Automation system
Possess knowledge of ISO 9001, 14001 and OHSAS

ABB LTD, VADODARA Dec 04-Dec 06
Trainee Engineer

Responsible for managing the process activities in winding section of induction motor
Accountable for maintaining discipline and safety in the shop floor, maintaining material consumption and quality of product also.
Deftly handled waste elimination and effective utilization of resources.
Maintained spare likes do as to reduce/eliminate possible breakdown
Handled Looping of bare copper conductor coils, manual taping of conductor coils, mounting of coils in stator core and connection of stator, Testing of stator core
________________________________________EDUCATIONAL CREDENTIALS

DIPLOMA in ELECTRICAL); 2004
M.S.University

SENIOR SECONDARY CERTIFICATE; 2001
G.S.E.B, Gandhinagar; 81.57%
________________________________________Date of Birth: 30th June 1985
Languages Known: English, Hindi and Gujarati
References: Available on Request

[Guest-IJT]

The submitted value of field named "Name :" is:
S.Suseela
-------------------------------------------------------
The submitted value of field named "Email :" is:
suseela64 AT yahoo.com
-------------------------------------------------------
The submitted value of field named "Designation / Name of the Post / Skill Set" is :
Chemist-QA
-------------------------------------------------------
The submitted value of field named "Copy Paste Your CV / Resume Here :" is:
-------------------------------------------------------
CURRICULUM VITAE
S.SUSEELA
Suprenipeta, suseela64 AT yahoo.com
OBJECTIVE :-
To become a successful professional by working with dedication and Commitment in an esteemed organization where I can put my knowledge and enthusiasm for the growth of the organization and expand my potential to the maximum.

EXPERIENCE SUMMARY :-
After Completion of M.Sc Degree I started in Nosch Labs Pvt.Ltd.In Quality Assurance Department.

WORK EXPERIENCE :-
December 2007 to till date working with Nosch Labs Pvt.Ltd. Prashanthi Nagar, IDA, Hyderabad in Quality Assurance Department..

JOB PROFILE :-
ROLE AND RESPONSIBILITIES IN QA DEPARTMENT;-
- Having good Knowledge in cGMP
- Preparation of Batch Manufacturing Records
- General inspection to all the departments
- Monitoring to packing of finished products
- Issuing Inner & Outer labels to finished products
- Release of dispatch batches
- Handling of change control, Deviations, Product complaints
- Issuing & Reviewing of Batch Manufacturing Records
- Having good Knowledge in ISO
- Handling of Internal audits
- Having knowledge in process validation, cleaning validation,
method validation.
- Handling of Training documentation
- Knowledge in Annual product review

EDUCATIONAL PROFILE :-
- S.S.C. from Board of Secondary Education with first class (73.3%)
- Intermediate from A.P.R.J.C.College with first class (73.2%)
- Graduation (B.Sc) from St.Theresas College with first class (79%)
- Post Graduation (M.Sc) from A.N.U P.G center with first class (65%)

DECLARATION :
I hereby declare that the information given above is true to the best of my knowledge.
Place :
Date :
-------------------------------------------------------
More Information about this submission and submitter :-
___________________________________________________
Submission ID : 4126366
Date & Time : 13th May 2011 10:55 AM (UTC)
IP Address : 122.175.66.157
Browser Info : Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; BTRS26718; chromeframe/11.0.696.68; InfoPath.2; .NET CLR 3.5.30729)
Predicted Country : India