www.atkins-me.com Atkins India Bangalore : PDMS Piping Layout Engineer / Designer, Oil & Gas

[pradsd]

atkins-me.com

Dear Friends,

Our Energy team has ambitious growth plans. You may have been aware that we are starting a new team of Oil & Gas professionals.

In line with this, we request you to refer your friends / acquaintances / ex colleagues who would suit our requirements and would like to pick up on this opportunity to join the Oil & Gas team in ATKINS Bangalore.

The openings are specific to reference numbers as follows:

Sr. No. Website Ref. No. Designations

1 ENO155 Process Engineer - Oil & Gas
2 ENO156 Process Designer - Oil & Gas
3 ENO157 Process Safety Design Engineer - Oil & Gas
4 ENO158 Package Equipment Engineer - Oil & Gas
5 ENO159 Rotating Equipment Engineer - Oil & Gas
6 ENO160 Static Equipment Engineer - Oil & Gas
7 ENO161 Piping Layout Engineer - Oil & Gas
8 ENO162 Piping Layout Designer - Oil & Gas
9 ENO163 Onshore Pipeline Engineer - Oil & Gas
10 ENO164 Electrical Engineer - Oil & Gas
11 ENO165 Electrical Designer - Oil & Gas
12 ENO166 Instrumentation Engineer - Oil & Gas
13 ENO167 Instrumentation Designer - Oil & Gas
14 ENO168 Offshore Structural Engineer - Oil & Gas
15 ENO169 Offshore Structural Designer - Oil & Gas
16 ENO170 Civil Engineer - Oil & Gas
17 ENO171 Civil Designer - Oil & Gas
18 ENO172 Architect - Oil & Gas
19 ENO173 Architectural Designer - Oil & Gas
20 ENO174 Project Engineer - Oil & Gas
21 ENO175 PDMS Engineer - Oil & Gas
22 ENO176 PDMS Designer - Oil & Gas
23 ENO177 Planning Engineer - Oil & Gas
24 ENO178 Document Controller - Oil & Gas


Kindly distribute this information to your ex-colleagues / friends who would like to join us in Oil & Gas - Bangalore office.

Please advice your referrals to view the Job Descriptions before applying online ONLY on -

How to apply
Applying for a position with us could not be simpler. Search our vacancies now to review current opportunities - either in the Middle East or with Atkins in other regions.

If there are no jobs of interest currently listed, you can register your interest for the future. To do this, search by your chosen criteria and enter your email address in the field at the bottom of the results page. You will then receive email alerts for any new vacancies that match your search criteria.

http://www.atkins-me.com/careers.aspx

Atkins is a multinational engineering and design consultancy, providing expertise to help resolve complex challenges presented by the built and natural environment. Our Middle East and India business provides clients in the region with a comprehensive service throughout the project's entire lifecycle. Whether it's the concept for a new masterplan, the upgrade of a rail network, the modelling of a flood defence system or the improvement of a management process, we plan, design and enable solutions.

10th Floor, Safina Towers, No 3, Ali Asker Rd
Bangalore - 560 052, Karnataka
Tel: + 91 80 4019 9399 / Fax: + 91 80 4147 5822

[shaikh.sadik]

please give me one chance to

[Guest]

CURRICULAM VITAE
Name : J. Narasimmalu
Email Id : narasimmalu_81 AT yahoo.com

Total Years of Experience : 10+years
Relevant Experience : 7+years
Technical Qualification : D.M.E. 1st Class 2001
B.Tech. 1st Class 2010
Designation : Designer
Software Knowledge : AutoCAD, Microstation, PDS & CAESAR II.
Responsibility : Piping Design Engineer Role.
FINAL SEMESTER PROJECT
DESIGN & ANALYSIS OF BOILER DOWN COMER PIPES
During my project I was checked the stress, force& moment induced in boiler and also calculated using CAESAR II Build 5.10. Stress analysis was carried out in three load cases. Stressed induced on those cases were within the allowable limit. The stresses induced are satisfied with ASME B31.1
AREAS OF EXPERTISE :
- Preparation of P&ID MTO & Non P&ID MTO
- Preparation of Tie-in Gad Preparation
- Leading the Draughting Team
- Checking of Piping layout
- MTO checking
- Preparation of Civil Inputs(vessel platform, pipe rack section)
- Preparation of existing underground piping rerouting layout based on slit trench sketch
- Preparation of Piping Plan & Sections.
- Checking Piping isometric Drawings.
- Checking Pipe Support Layouts.
- Checking Pipe Support Detail Drawings.
- Preparation of Piping Isometric drawings.
- Generating Piping & Supports B.O.M.
- Preparation of Stress Isometrics.
- Review of P & IDs, Equipment G.As
- Development of concentric Reducer, Dish End, Mitter bend.
PRESENT EMPLOYMENT
Company Name : Petrofac Engineering Services India Pvt Ltd., Chennai, India
Designation : Designer
Responsibility : Design Engineer
From : August 2008
To : Till date
PREVIOUS EMPLOYMENT HISTORY
1) Company Name : GEA Energy System (India) Ltd., Chennai, India
Piping Engineering Division
Designation : Sr. Draughtsman
Responsibility : Designer
From : February 2006
To : June 2008
2) Company Name : VP Engineering Consultancy services, Chennai, India
Designation : Draughtsman
From : November 2005
To : February 2006
3) Company Name : Bharath Electronics Ltd., Chennai
Designation : Apprentice ship
From : May 2002
To : August 2003
4) Company Name : TVS (Diesel system)
Designation : Trainee
From : June 2001
To : march 2002
WORK EXPERIENCE
Present Organization
Petrofac Engineering Services India Pvt Chennai, India, August ’08 to till date
Designer
Responsibilities
- Piping Design Engineer Role.
- MTO checking.
- Checking of piping layout.
- Preparation of P&ID MTO & Non P&ID MTO.
- Preparation of Tie-in Gad Preparation.
- Leading the Draughting Team.
Previous employment
a) Piping Engineering Division
GEA Energy System (India) Ltd., Chennai, India, February ’06 to June 2008
Sr. Draughtsman
Responsibilities
- Piping Designer Role.
- Preparation of Piping Layouts.
- Checking Piping Fabrication Isometrics.
- Checking Pipe Support Layouts.
- Checking Pipe Support Detail Drawings.
- Preparation of Piping Isometrics.
- Preparation of Pipe Support Layouts and Detail drawings.
- Generating Piping and Supports B.O.M.
- Preparation of Stress Isometrics.
- Review of P & Ids and Equipment G.As

b) VP Engineering Consultancy Services, Chennai, India Nov ’05 to February 2006.
Draughtsman
Responsibilities
- Preparation of Piping Isometrics.
- Preparation of Pipe Support Layouts and Detail drawings.
- Generating Piping and Supports B.O.M.
c) Bharath Electronics Ltd., Chennai, India May ‘02 to Aug ’04.
Draughtsman
Responsibilities
- Design and drawing preparation of Mechanical equipments required for Electronic Equipments using AutoCAD.
FIRST ASSIGNMENT IN KUWAIT
I went to Kuwait site for tie in (piping) routing feasibility and measurement it was two month assignment. There I worked two projects they were water injection phase and MAA refinery. I have calculated Pneumatic pressure test of instrument air piping for MAA Refinery.
May ’11 to July 2011
ACHIEVEMENTS
Was involved in numerous Piping Detailed Engineering and proposal projects, few of which are as under:
A. As DESIGN ENGINEER ROLE for the following Projects & Client
- Gas sweetening facilities, Qatar Petroleum (QP).
- Effluent water injection phase-1& seawater injection phase – 2, Kuwait Oil Company.
- Hewett gas storage,
- Nghi Son refinery & Petrochemical (NSRP).
- Ruwais Expansion.
B. As DESIGNER ROLE for the following Projects & Clients:
- 500 MW Vijayawada Thermal Power Station, A.P India
- 500 MW Khaperkeda Thermal Power Station,
- 500 MW Kakathiay Thermal Power Station, A.P. India
- Nestle Steam & Water System for the Noddle Plant Expansion, Utaranchal
- 100 MW Natural Gas Based Power Plant, TNEB Valuthur
C. As DRAUGHTSMAN ROLE for the following Projects & Clients:
- Captive Power Plant for Visag Steel Plant for TSPL, Hyderabad, A.P. India.
- Captive Power Plant Shyam DRI for TSPL, Hyderabad, A.P.
- Captive Power Plant Chanderiya Zinc Smelter Phase II for TSPL Hyderabad, A.P.
- Captive Power Plant Tokyo Cements for TSPL Hyderabad, A.P.
- 60 KM Refinery Condensate pipeline for ONGC Karaikal, for Nicco Corp Kolkatta
- Condensate & water System Piping for 10 MW Kamachi Sponge Iron.
- Condensate & water System Piping for 5.5 MW PT Cabot Indonesia.
- Condensate & water System Piping for Mangalam Cements Ltd, Rajasthan
- Condensate & water System Piping for Hitech Carbon Gummidipoondi.
- 2 x8.5 MW Biomass based Power Plant for Walchandnagar industries.
- Cogen Plant for NRI Power & Steel Ltd. For Thermax Ltd. Pune.
- Cogen Plant for Dev Priya Papers L

[Guest]

Sajin N.G.
E-mail : sajin_eee AT yahoo.co.in/ngsajin AT gmail.com
Objective :
Seeking a challenging position to utilize my skills and abilities in an industry that offers Professional growth while being resourceful, innovatiove and flexible.
Strength :
- Strong communication and interpersonal skill.
- Commitment and dedication.
- Interested in working with a team as well as an individual.
- Excellent health condition to adjust to any extreme site conditions
WORK EXPERIENCES : OVER ALL EXPERIENCE 2.5 YEARS
( GULF 2.5 YEARS)
- ELECTRICAL ENGINEER :
COMPANY : GALFAR ENGINEERING AND CONTRACTING S.A.O.G
ADDRESS : GALFAR ENGINEERING AND CONTRACTING S.A.O.G
P.O. BOX 533
P.O.CODE 100
GHALA
MUSCAT
SULTANATE OF OMAN
15 OCTOBER 2009 to Present
PROJECT : CONSTRUCTION OF DUQM– SHIPYARD AND DRYDOCK COMPLEX AT DUQM PORT,SULTANATE OF OMAN.
CONSULTANT : DAEWOO SHIP BUILDING AND MARINE ENGINEERING.
CLIENT :MINISTRY OF TRANSPORT AND COMMUNICATION,SULTANATE OF OMAN.
COMPANY :OMAN DRYDOCK COMPANY S.A.O.C.
CONTRACTOR : DAEWOO GALFAR CONSORTIUM.
PROJECT : CONSTRUCTION OF CROWN PLAZA DUQM BEACH HOTEL ,SULTANATE OF OMAN.
CONSULTANT : COWI & PARTNERS LLC..
CLIENT :OMRAN, MINISTRY OF TOURISM,SULTANATE OF OMAN.
CONTRACTOR : GALFAR ENGINEERING & CONTRACTING S A O G.
WORKED IN FOLLOWING POSITIONS MENTIONED BELOW
- CONSTRUCTION MANAGER
- Preparation of technical as well as commercial offers as per standards and client requirements.
- Directly reporting to Project manager.
- Interacting with technicians and other colleagues for rapid completion of work at onshore.
- Ability for job specific skilled/ unskilled workforce deployment.
- Awareness of the work permit system and other Safety norms and regulations
- Knowledge of hazardous zones and area classification.
- Handling unskilled workforce effectively.
- Interaction with consultant and client for technical and official issues and capability of fast decision making at site for immediate solution.
- Handling subcontractors effectively.
- Handling consultant and client effectively for the well being of the organization.
- Material Follow up and material ordering effectively making sure that material delivery at site will not be delayed.
- Mechanical,Electrical,Plumbing,HVAC.QUANTITY SURVEYOR
- Preparation of Quantity Take off sheet from all Contract drawings and Approved shop drawings for comparison.
- Clear study of Contract document and specifications effectively.
- Submission of valuation every month for claiming the amount based on finished work from measurement sheet attached in Inspection request and stock ledger in the stores for the month and other preliminaries.
- Submitting variation order to the consultant for claiming the amount which is not in the contract or bill of quantities.
- Effective interaction with Consultant explaining the work scope
- Identification of variation of quantities when new revision of drawings proposed by consultant.
- Efective cost control by giving extraordinary suggestions.
- Final billing submission at the end of the project.
- ELECTRICAL ENGINEER
- Interaction with consultant for technical issues at site for immediate solution
- Supervising job in drydock area,tunnel area and quay area as an external electrical engineer.

- Supervision of subcontractors for the cable tray work in the shipyard area for the external
- Execution of earthing installation through out shipyard using bare copper conductor and fgv cables.equipment earthing and transformer neutral earthing and substation overall earthing experience.installation of lightning protection in buildings.meggering of earthing cables experience.
- Low voltage and high voltage cable termination using lugs and glands experience.
- Meggering of low voltage cables and high voltage cables experience.
- Testing of cables whenever phase to earth fault and phase to phase fault occurs(open and short circuit fault)
- High potential test of 11kv cable experience
- Installation of street lighting poles and high mast tower lights experience.
- Installation of timer and contactor in the external lighting distribution board experience.
- Distribution board meggering experience.
- Trunking and conduiting works at site experience.
- Power panel board installation and dressing experience.
- Installation of fire alarm devices,lights, sockets,and other accessories at site.
- Installation of fep conduits,pvc ducts and hdpe ducts in the external shipyard area using spacers for low voltage,high voltage and low current cables.
- Installation of cctv system ,public address system,rfid system,fire alarm system and data and communication system at site.
- Splicing of fibre optic cable in the fibre optic panel experience using splicing kit
- Actvive hse tool box meeting conducting experience which reflected to the site without any loss time injury throughout the end of the project.
- MEP DRAFTING CO-ORDINATOR
- Preparation of cable schedule for the shipyard area based on design calculations and submission to the consultant for approval.
- Preparation and submission of detailed load data for all electrical panel boards used in shipyard area to the consultant and issued for approval.
- Preparation of fire alarm system drawing for the shipyard area.
- Preparation of public address system drawing for the shipyard area.
- Preparation of cctv system drawing for the shipyard area.
- Preparation of external street lighting system drawing for the shipyard area.
- Preparation of electrical testing and commissioning reports of the project and submission to the consultant and client.
- Preparation of electrical design report in the project and submission to the consultant and client.
- Electrical operation and maintenance for all disciplines such as power cable,panel boards,cctv system,fire alarm system,smatv system,lighting fixtures.
- Preparation and submission of as built drawings in the project using draftsman.
- Preparation of MEP co ordination drawing in crown plaza hotel.
Educational profile :
Qualification University/ Institution Year of Passing Percentage(%)
B.E.Electrical and Electronics Engineering

Anna University,Maharaja Engineering College,Coimbatore
2009

77.0%
H.S.C.
Kannadi Higher Secondary School,Palakkad,Kerala

2005
82.8%
S.S.L.C.
Basel Evangelical Mission Higher Secondary School,Palakkad,Kerala

2003
81.5%
BE Semester Marks :
Semester I II III IV V VI VII VIII
% scored 79% 76% 69% 76% 76% 82% 78% 80%
Project Completed :
Intelligent Car Security System using Random Security Codes-
A system for the security level in the car by using dynamic generation of random of keys. The system was designed using Micro Controller Unit (MCU).
Activities :
Undergone In-Plant Training in ITI LIMITED Palakkad,Kerala.
Computer Proficiency :
Packages : Microsoft Office – Excel, Word, Powerpoint
Languages : Basics of C, C++, Basics of Data structure
Operating system : Windows (98/2000/XP/Vista)
Honours & Activities :
Academics:
- Successfully completed the “Health, Safety & Environment” Training
- Active participation in all cultural activities during graduation
- Coordinated an electrical game show, Xyko-07
- Coordinated Tours and Industrial visits.
- Chief coordinator of Electrical game show, Pravega-08
- Achieved First Class in B.E.
- Achieved Distinction in H.S.C.
- Achieved Distinction in S.S.L.C.
- Placement Representative of Class in B.E.
I Sajin NG, do hereby confirm that the information given above is true to the best of my knowledge.
Date:
Signature:SAJIN NOCHUR GURUVAYURAPPAN

[Guest]

i am interested to do a job as a project engg. recently i am working in 3m india as prod.tech .total i have exp.3 years.

[Guest]

CURRICULUM VITAE
Name : Guddappa P
Email ID : guddappa47 AT rediffmail.com
Guddappa47 AT gmail.com
CAREER SUMMARY
Objective :
I am looking for a position of Instrumentation Designer in a leading Oil & Gas Industry where my knowledge can be shared and enriched. I am aspiring to use my skills in the best possible ways for the development, profitability and growth of the organization.
Qualification
- Passed ITI -Mechanical with distinction from Bapuji Govt. I.T.I, Laxmeshwar
- PUC – Commerce Govt. college magadi.
- S.S.L.C from SS kudalamath High School Shigli.
Technical Skills :
- PDMS – Instrumentation, Equipment, Supports & Model Review.
- Knowledge on Basic and Fabrication Isometric Extraction.
- Macro generation in PDMS.
- Report generation in PDMS.
- MTO Extraction.
Software Skills :
- Well versed in PDMS 11.6 & 12.0– Design, Draft,
- Well versed in AutoCAD V2006. 2008, 2009, 2010.
Work Experience :
Overall 8+ years of experience in Offshore, Onshore, and Process & Power Instrumentation in PDMS & Auto CAD.
Current Organization : VALDEL ENGINEERS & CONTACTORS (Bangalore),
Designation : Instrumentation Designer.
Period of stay : 01 Dec 2011 - Till date.
Project : S&M.
Scope of Work :
- Designing & Detailing of on Micro-station
Organization : PETROFAC ENGINEERING INDIA PVT LTD (CHANNI),
Designation : Instrumentation Designer.
Period of stay : 20 Aug 2010 – 11 Nev 2011
Project : ADCO SAS PROJECT.
Project : QATAR PETROLEUM PROJECT.
Project : IN-SALAH GAS PROJECT.
Scope of Work :
- Designing & Detailing of on PDMS; PDS Auto CAD.
Activities involved in :
- Generation of equipment layout.
- Basic Instrumentation study.
- Support modeling in PDMS.
- Drafting in PDMS.
- MTO & report generation.
- PDS Telecom Equipment.
- Telecom Cable tray Routing Layout.
- Telecom Equipment Layout.

Organization : EXTERRAN ENERGY SOLUTION INDIA PVT LTD (CHANNI),
Designation : PDMS Instrumentation Designer.
Period of stay : 21 Jun 2010 – 19 Aug 2010
Project : CGTP - ALIBEKMOLA & GPU - KOZASHAI PROJECT.
Owner : KAZAKHOIL AKTOBE, LLP.
Scope of Work :
- Designing & Detailing of the Gas Injection Compression on PDMS platform.
Activities involved in:
- Generation of equipment layout.
- Basic Instrumentation study.
- Support modeling in PDMS.
- Drafting in PDMS.
- MTO & report generation.

Organization: L &T VALDEL ENGINEERING LTD,
Designation : PDMS Instrumentation Designer.
Period of stay : November 2007 – 19 Jun 2010
Project: MV23 Guary Offshore FPSO.
Owner: Modoc.
Scope of Work:
- Designing & Detailing of the Gas Injection Compression on PDMS platform.
Activities involved in:
- Generation of equipment layout.
- Basic Instrumentation study.
- Support modeling in PDMS.
- Drafting in PDMS.
- MTO & report generation.
Project: Tullow Ghana Limited Jubilee FPSO.
Owner: Alliance Engineering.
Scope of Work:
- Designing & Detailing of the Gas Injection Compression on PDMS platform.
Activities involved in:
- Generation of equipment layout.
- Basic Instrumentation study.
- Support modeling in PDMS.
- Drafting in PDMS.
- MTO & report generation.
Project: Rajasthan Northern Area Development, Mangala Field.
Client: Mustang Engineering L.P., Houston, USA.
Owner: Cairn Energy India Pvt. LTD.
Scope of Work:
- Designing & Detailing of the entire project on PDMS .
- Design and Detailing of Oil Well Pads and Water Well Pads for Mangala Field.
Responsibilities:
- Generation of equipment layout.
- Basic Instrumentation study.
- Support modeling in PDMS.
- Drafting in PDMS.
- MTO & report generation.

Organization: Spectral Consultant Services Pvt Ltd. Bangalore.
Designation : Auto CAD Designer. (Electrical)
Period of stay : October 2006 – November 2007.
1) Project: TRINITY HOTELS / OFFICE INTERIER
- Cable Tray Layout.
- CCTV Layout
- Access Control Layout
- Lighting layout
- Smoke Detector Layout.
- Single Line Diagram.

Organization: Power Design. Bangalore.
Designation : Auto CAD Designer. (Electrical)
Period of stay : October 2005 – October 2006.
2) Project: PURVANKER
- Cable Tray Layout.
- CCTV Layout
- Access Control Layout
- Lighting layout
- Smoke Detector Layout.
- Single Line Diagram.

Organization: Yokogawa India Limited Bangalore.
Designation : Cad Draughtsman. (Instrumentation)
Period of stay : October. 2003 – October. 2005.
Worked with M/s Yokogawa India Ltd, through Softec services (Human Resource Placement) under Projects department for engineering & designing. Yokogawa India Ltd, Electronics City, Bangalore.
1. Project: IOCL-Haldia, Omifco, Buurup fertilizers, Iffco kalol, Safco-ufc, IOCL Panipat, IOCL-baruni, VVF-Dfa, Agarawal, National fertilizers limited, IFFCO-Aonla, IFFCO-Phulpur & IPCL.

DESIGN GROUP
Design & drafting various engineering documents
- Yokogawa control system drawings
- Fabrication drawings
- Panel & Console drawings
- Control room layouts, System configuration & Wiring drawings
- Cable tray layout
- Field instrument drawings
- Loop schematic drawings
- Acquiring data from fox pro into AutoCAD for various processing requirements
- Instrument Location Plan layout
- Fire & Gas Detection layout
- PDMS Designer.
Thanks & Regards,
Guddappa. P