Intercontinental Development Engineering ae e Pvt ltd Chennai : PDMS/PDS Piping Draftsman

[Admin]

Intercontinental Development Engineering ae e Pvt ltd Chennai : PDMS/PDS Piping Draftsman
Company Name: intercontinental development and engineering ae&e private limited
Company Location: chennai greams road
Designation of the vacancy: draftsman in piping
Company E-mail for contact: sudhakar.dhayalan@yahoo.com
Company Website: www.aee-idea.in

Details of the job:
I.D.E.A Pvt. Ltd. is a multidisciplinary engineering consultancy company for the various industrial clients in India and abroad, primarily in Europe and USA.
For power and process industries, I.D.E.A Pvt., Ltd., is geared up to offer the full gamut of gamut, detailed engineering in all disciplines (Process and piping) for the following segments:
Petrochemical
Oil & Gas
Refineries
Chemicals
PROFESSIONAL CARRIER
Area of Expertise:
Preparation and Checking of Isometrics.
Support Marking and Make the Detailing.
Piping Bill of Materials.

DESIGN ENGINEERS / DRAFTSPERSONS / DESIGNERS (CIVIL AND PIPING) AND INSPECTION ENGINEERS

Educational Qualification :
Degree or Diploma in respective dsiciplines
Experience Required :
5 to 15 years
Area of Expertise :
Piping : Plot plan, piping layout, Stress analysis, Piping support, etc. Exposure to PDMS/PDS, Caesar II is desirable.

Civil & Structure :
Analysis and design of industrial concrete structures, foundations, underground piping and building, proficiency is STAAD is a must.

Inspection :
Experience required in inspection of static and rotating equipments for process, refinery and power plants. Knowledge and certifications in NDT, international codes like ASME, API, BS, and IS is essential. Should be willing to travel and work in sites anywhere in India. Person retired or taken VRS may also apply.
Software Knowledge Required
Relevant software knowledge is required.

Contact us :
Old No.32, New No.53,
Greams Road,
Chennai – 600 006,
Tamil Nadu, India.

[Guest Poster]

Dear Sir/madam:

I am writing in reference with, Your job description is perfectly matches with my qualifications, and I am very interested in the opportunity. I have pasted my resume below for your review. I would like the opportunity to meet and share more about my qualifications and the ways in which I can contribute to your team. Thank you for your consideration. I am looking forward to hearing from you.

CURRICULUM VITAE
C.NATARAJAN
No.10 Thiru.Vi.Ka.St Mobile No : 9944080250
T.M.P.Nagar, E-mail: cm_natbe AT yahoo.com
Padi,Chennai - 50

CAREER OBJECTIVE
Seeking a position in piping design field to utilize my skills and abilities in an organization, that offers professional growth while being resourceful, innovative and flexible.
EDUCATIONAL QUALIFICATION
B.E .Mechanical (2002-2006) : OGPA: 7.79 (First class).
DME (1999-2002) : Percentage: 74.7 (First class).
SSLC (1999) : Percentage: 78.2 (First class).

Designing Software Skills

AUTOCAD
- Modeling& Drafting : Machining components modeling, Detailing.
PDMS
- Piping Software : Equipment modeling, Pipe routing, Structural modeling, Drafting, Iso drafting, Clash checking.
MICROSTATION
- Modeling& Drafting : Knowledge in 2D drafting, modeling & Detailing.
PRO-E
- Modeling& Assembly : Modeling Knowledge.

Experience
Current Industry : SIRA Systems Pvt. Ltd.
Designation : Piping Engineer
Duration : 27.08.2008 to till date.

NATURE OF WORK

USING PDMS SOFTWARE:

Modeling the3D pipe routing with respect to Corresponding P&ID.
Modeling the Equipments & Instruments from Vendor detail documents.
Preparing final General Arrangement drawings and Equipment location drawing.
Modeling the interconnecting pipe routing from IPD layout.
Locating the pipe supports with stress engineer input.
Clash Checking for pipe routing.
Data consistency checking for Pipe routing.
Extraction of Isometric drawings to dxf from PDMS.

USING AUTOCAD-2010 SOFTWARE:

Editing the preliminary P&IDs with respect to completed model or constructed plant.
Separate Pipe linings from Assembly Model for detailing purposes.
Modeling the pipe fittings like Valves, Tee, Elbow and all pipe accessories for ASTM Standards.
Preparing the Isometric and all other views for manufacturing and fabrication.
Design and drafting of piping/mechanical plant models using Project Specifications and Procedures.
Developing the 2D Drawings by using Auto CAD for machining process.
Modify & Detail existing structures,Equipments and Skids.

GENERAL:

Pipe wall thickness calculation.
Weight calculation for BOM purposes.
Selecting the sizes and materials based on ASTM Standards.

FINISHED PROJECTS

AMMAR CHEMICAL PLANT.
ORBIT PLANT.
KLORIGEN M-SERIES for Sodium hypochlorite, Chlorine (for US-Algerian Client).

MY CONTRIBUTION ON THESES PROJECTS:

Modeling the Equipments like cooling tower, Softener, Chemical Tanks, and etc. from manufacturer catalog Using PDMS.
Preparing General Arrangement Drawing from customer input using Auto CAD.
Preparing 3D pipe routing from P&ID.
Preparing 3D interconnecting pipe routing for all individual units.
Clash checking using PDMS.
Clarifying doubts with US and Algerian clients.
Detailing the individual unit pipe assemblies using Auto CAD.
Preparing BOM (fittings, valve quantities & pipes length etc...).
Weight calculation of the materials, Pipes for BOM purposes.
Taking ISO View for both interconnecting and other pipe routing.

Previous Industry : Design Desk India Pvt. Ltd.
Designation : Designer - Piping
Duration : 03.09.2007 to 26.08.2008.


NATURE OF WORK

Equipment modeling and location fixing on the site.
Pipe routing for steam, cooling water, drain water, for machines, and ovens.
Model the structural frames with respect to structural engineer input.
Prepare the fabrication drawings.
Prepare BOM.
Reverse engineering.
Prepare the machining components for other processes like Laser cutting, Turning, Machining.
Prepare site layout for M/C Erection and correct the existing layout for additional M/Cs.
Separating components from Assembly Drawing.

Previous Industry : ACETECH MACHINERY Components
Designation : CAD Engineer
Duration : 17.07.2006 to 31.08.2007.

NATURE OF WORK
Blank Development of Bending components.
Collect the drawings from customer and distribute to subordinates
Clarify the complaints from the customer side.
Prepare the CAM Program using AP-100 software for cutting process.
Prepare with insert of Drawings in PowerPoint, Excel for presentation purpose.
Maintain CAD department records for management discussion.
Reverse engineering using CAD.


Personal Details
Name : C.NATARAJAN.
Father’s Name : S. Chandran.
Date of Birth : 30.05.1984.
Sex : Male.
Languages Known : Tamil, English.
Nationality : Indian.
Religion : Hindu.
Passport No : G1239946.
Permanent Address : No.12/5, Inbakavi Illam, Somasundaram St.,
Chidambaram-608001.
Contact No: 9500336018,9597578435.

DECLARATION
I do hereby solemnly confirm that the above-furnished details are true to the best of my knowledge and belief
PLACE: Chennai yours sincerely
DATE : 06.04.2010 C.NATARAJAN

[Unregistered]

RESUME
A. Ahmed Faazil
mech_cad2009 AT yahoo.com
mechpdms47 AT gmail.com

CAREER OBJECTIVE :
A position as a Mechanical Engineer that will capitalize on acquired expertise and experience.
Excellent time management skills and ability to work with less supervision. Can work closely with engineers and other professionals. Desire a position with career growth potential.

WORKING EXPERIENCE :
1. Corporate : Khivraj Motors, [Poonamallee , Chennai]
Designation : Service Supervisor (MAN Trucks)
Experience : Since – Oct 2010 to 20.11.2012

RESPONSIBILITIES/ACHIEVEMENTS :
Responsible to guide the clients on maintaining their vehicles and ensuring efficient performance of the vehicles.
Identify the reasons for malfunctioning of the vehicle and assign technician to perform the repair works.
Advise the clients on using the vehicle appropriately and ensuring regular servicing and maintenance to the engines.
Oversee the work of technicians and provide them assistance for complex repair work.

2. Corporate : Madras conveyors [Ambatur , Chennai]
Designation : Draftsman (Autocad2007)
Experience : May 2009 to Dec 2009

RESPONSIBILITIES/ACHIEVEMENTS :
Printed and created specialty sets of maps for clients.
Visit to the Industry for review of the Work area.
Report to the Project Manager and Consul with the costumers
Draw the GA, Assembly Drawings of Conveyors According to Customer Specification.
Finally release the drawings to the Sub contractors for fabrication
Monitoring the Production and give the details about the drawing to the fabricators.

3. Corporate : TVS Sun dram Fasteners LimitedAutolecs Division [Avadi , Chennai]
Designation : Trainee (CNC Operator)
Experience : Feb 2008 to March 2009.

RESPONSIBILITIES/ACHIEVEMENTS :
Worked as Trainee in the CNC Machine operator .
Production of Shaft, Hub lower, Oil pump.
Responsibility to produce high quality of shaft operation without error.
Undergone different training in the safety and factory machine operation.

AREAS OF EXPERTISE :
Key Qualification :
PDMS (Plant Design & Management System) :
Conversant with PDMS, handled Design, Draft, Isodraft, Reporter, Datal Modules and SubModules in design like Equipment, Pipe work, Structural, Cable Tray, HVAC, Spooler in PDMS.
Work on 2D & 3D, ISO Drawings in practice project.
Good Knowledge of all Hierarchy & Naming Convection for Modules above.

Piping Design Engineering & Construction :
Study of P&ID for entire plant.
Well conversant with ASME codes B31.3 and B31.1 and all standards for piping, fittings & valves.
Developing site location plant and unit plot plans of piping GAD and Isometric.
Preparation of piping and valves specification.

EDUCATIONAL STATUS :
PDMS (Plant Design & Management System),Kagira drawing solutions,chennai
Diploma in Mechanical Engineering,Avadi,Tamil nadu.

COMPUTER PROFICIENCY :
AutoCad(2D), PDMS, ProPipe.
MsOffice. MSworld.

COMPUTER SKILLS :
Hardware : Application Software Installation / Internet configuration / Firewall configuration.
Basic skills : MS Windows, MS Office, Adobe Photoshop.

INTERNAL PERSONAL SKILLS :
Easy understand drawings.
Flexible to work environment.
Having experience towards work as an individual or along with team.
Knowledge in AutoCAD operations.
Ability to operate computeraided drafting (CAD) equipment’s.
Excellent time management skills.

EDUCATIONAL QUALIFICATIONS :
Graduation : Diploma in Mechanical Engineering [ May 2004 – Oct 2007].
Aalim Mohammed Saleh Polytechnic. [Anna University, Chennai]
SSLC : Smt. Malathi Mat. High. Sec. School [Oct 2004].
Chennai, Tamilnadu.

PERSONAL PROFILE :
Name : Ahmed Faazil . A
Date of Birth : 24 05 – 1987
Sex : Male
Father Name : P.A. Ayub Khan
Nationality : Indian
Marital Status : Single
Language Known : English (Fluent) and Tamil (Fluent)

DECLARATION :
I hereby declare that the abovementioned information is correct up to my knowledge and I bear the responsibility for the correctness of the abovementioned particulars

DATE : SIGNATURE
Place : Chennai India.
(Ahmed Faazil .A)