OIL, GAS, REFINERY, PETROCHEMICAL

[bhuvana_sruthi]

Hai

Warm Greetings

We are a leading engineering consultant providing recruitment solution to many MNC epc clients engaged in projects in oil, gas, refinery & petrochemical sector in India and Abroad.

DESIGNER
Piping Designer
Civil & Structural Designer
Electrical Designer
Instrumentation Designer
Process Designer

ENGINEER
Piping Design Engineer
Civil & Structural Design Engineer
Electrical Design Engineer
Instrumentation Design Engineer
Process Design Engineer
Mechanical / Rotating / Static / Package Equipment Design Engineer
Loss Prevention, Risk Assessment & Safety Design Engineer

Software: PDS / PDMS / Caesar / Staadpro / Sacs / Etab / Pvelite / SPPID / SPR / Hysis / HTRI / Aspen plus /

For Draughtsman - Autocad & Microstation

Experience in oil, gas, refinery & petrochemical projects is must

Designation : For Engineer from entry level to Lead or Chief or higher designation and For Designers from Designer level to lead level

Experience range: 3+ to 20+ years

If you have design experience in oil, gas, refinery and petrochemical projects & looking for a job a change, please mail to us your latest resume in word format asap to bhuvana_sruthi@yahoo.co.in or bhuvana.epc82@yahoo.com

KINDLY SEND THIS MAIL AMONG YOUR REFERENCE GROUPS AND YOUR EFFORTS FOR REFERENCE OF POTENTIAL CANDIDATES ARE MORE APPRECIABLE.

Best Regards
Bhuvana
Oil & Gas consulting
Chennai
bhuvana_sruthi@yahoo.co.in
bhuvana.epc82@yahoo.com

[Guest]

CURRICULUM VITAE
Bhalodiya Jugalkishor A.
Cell No: +91-9429374436/9860508797
jugalpatel2708 AT gmail.com
Specialization: Bachelor of Engineering (B.E.) Major: Mechanical
Career Objectives:
To work in a professional environment, which provide potential learning prospects & growth Where I can contribute and learn to the best of my capabilities.
Name : Bhalodiya Jugalkishor A.
Date of Birth : 27th August, 1985
Sex : Male
Nationality : Indian
Permanent Address : 302, Swapnasrusti app., Zanzarda road,
Junagadh-362001 (Gujarat)
Language known : English, Hindi, Gujarati
Contact Number : +91-9429374436
Pre-Engineering Performance:

Term Institution University/Board Percentage
10th N.P. Bhalodiya high school, Junagadh GSEB 84.86%
12th N.P. Bhalodiya high school, Junagadh GSEB 46.00%
Engineering Performance:
Term Institution University/Board Class
Diploma Sir Bhavsinhji Polytechnic Institute, Bhavnagar. Technical Examination Board, Gandhinagar. First class
Term Institution University/Board Class Percentage (%)
B.E. 2nd Year Bharti vidyapeeth deemed University, college of engineering, Pune. B.V. D.U.C.O.E second class 52.33
B.E. 3rd Year Bharti vidyapeeth deemed University, college of engineering, Pune. B.V. D.U.C.O.E second class 50.73
B.E. final Year
Bharti vidyapeeth deemed University, college of engineering, Pune. B.V. D.U.C.O.E First
class 62.8
Computer skills:
- Ansys 5.4
- Auto CAD 2006
Diploma Project:
- Mechanical Winch
Degree Seminar & Project:
- Tidal Power Plant
- Enhancement of Natural Convection Heat Transfer From An Inclined Plate Using Grids
Achievements and Other Activities:
- Visited Mahindra & Mahindra Ltd, Plant (Igatpuri, Nashik )
- Participated in various Events in BHARTIYAM ‘07/08
Hobbies:
- Playing Cricket, Reading, Traveling and Listening music .
Strengths:
- Hard working & dedicated
- Capabilities to learn new things
- Zeal for Perfection
Date:
Place:
Bhalodiya Jugalkishor A.

[Mr. k. dayalan]

i am dayalan, i have 6 year piping designer

[Guest]

hello everyone,

i am shashi. fresher in pds with mechanical engineering looking for job,

[Guest]

Mr. BHALCHANDRA DATTATRAY VACHAKAL
Current Address: - 502/5, Al Ameri House, Near Golden stand 10, Dubai, U.A.E.
Mobile No = 00971+504758460
Office No = 00971+48034774,
Email = bhalchandra.vachakal AT gmail.com ,
info_bhal AT yahoo.com ,


SUMMARY:
Over 9 years of experience in Piping & Layout design for Oil & Gas (Onshore and Offshore), Chemical, Petrochemical and Refinery Plants for Design / Detail Engineering and Modification projects. Using in 3D PDS Modeling, Good Working knowledge of PDS, Smart Plant Review, Pelican Forge, Microstation, AutoCAD and PDMS, is added advantage /2D/3D

TECHNICAL SKILL:
- 3D Modeling of piping as per P&ID, using PDS Intergraph Ver. 8.0,
- Equipment modeling as per vender drawing detail.
- Study, preparation and checking Pipe Supports Arrangement as per support standard and design special pipe supports sketches.
- Conduct 3D model reviews (internal / external)
- Isometric Extraction and Checking
- Studies and MTO estimation for Bids.
- Columan, Exchanger, Pump and compressor Piping
- Plot Plan Development and GA Preparation,
- Rack Piping, OSBL and ISBL Piping.
- Piping Clash & Review in SPR with client
- Nozzle Orientation.

COMPUTER AIDED DESIGN & SOFTWARE:-

Intergraph : - PDS Ver. 8.0 (Good Experience)
Aveva : - PDMS
Bentley : - Pelican Forge (Support Modeler)
Intergraph : - Smart Plant Review
Bentley : - Microstation’SE/J
AutoDesk : - AutoCAD

LIST OF FUNCTIONS: -

- PDS Piping Designer with J. Ray McDermott. Dubai, U.A.E. ( Feb. 2010 to Till date)
- Associate as a PDS Piping Designer with Chemtex Global Engg. ( Feb 2009 to Sep 2009 )
- PDS Piping Designer with Becrel Engineering Pvt. Ltd. ( Feb 2008 To Jan 2009 )
- PDS Piping Designer with SP Consultant Services ( July. 2004 To Feb 2008 )
- Designer with Reliable Consultant Services ( Dec. 2002 To July. 2004 )
- Piping Draftsman with Reliance Petro Chemical.( Sep. 2001To Dec. 2002 )
- Piping Draftsman with CAD Solution ( Dec. 1999 To Sep. 2001 )
EDUCATIONAL PROFILE:-
- Mechanical Draftsman from Industrial Institute, India.
- Piping Draftsman from Akar Institute, Mumbai, India
- Certificate Course in AutoCAD in Aug.1999 from Zaknet Institute, Mumbai. India
- H.S.C. March 1997
- S.S.C. March 1995

Detail of Work Experience:-

1) J. RAY McDERMOTT ENGINEERING. DUBAI (U.A.E.)

J. Ray McDermott is a leading worldwide marine solutions company with fabrication facilities in the Americas, Middle East, Caspian and Asia Pacific. Services include design, fabrication, transportation and installation of offshore platforms, and installation of offshore pipelines.
Designation: - PDS Piping Designer
PROJECT – Rasgas Expansion Project (Ras Laffan Liquefied Natural Gas Co. Ltd.)
JOB PROFILE:-
- Piping and Equipment 3D modeling using PDS
- Preparation and checking of Design and Fabrication Isometric drawings with Bill of Material/Joint numbers/Spool numbers, Field weld marking.
- Support modeling as per support stander detail and extraction 2D drawings using Pelican Forge (Support Modeler)
- Preparation and Checking of equipment layouts, Safety and Escape route layout.
- Clash checking and Review in Smart Plant Review
- Preparation of General Arrangement Drawings using Drawing Manager.
- Coordination with Process, Mechanical, Civil, Electrical & Instrumentation.

2) CHEMTEX GLOBEL ENGENEERS PVT. LTD. MUMBAI
Chemtex is an engineering, Procurement and construction company that specializes in delivering technology oriented projects for the Oil & Gas Petrochemical, Refinery, Polymers, Fibers, energy and Environmental Industries
Designation: - PDS Piping Designer

Client: - Burns & McDonald (USA)
PROJECT: – Memphis Refinery and Port Auther Refinery.

Client: - ABB (Italy)
PROJECT: –Potassium Naitrate Crystallization Plant KN03 CHILE

JOB PROFILE:-
- Piping and Equipment 3D modeling using PDS
- Isometric Extraction, Checking and MTO Preparation
- Support Modeling and extracting detail drawing from Pelican Forge (Support Modeler)
- Conducting and operating (SPR) model review with Client
- Pump and Exchanger Piping Designing, Pipe Rack Piping Designing.
- Study and Understanding the PID & Client Specification and commenting on them with respect to layout
- Prepare Piping layout, Equipment layout (section, Elevation), GAD Drawing, Special Supports Drawing etc.
- Study & checking of the Nozzle orientation & Ladder/ Platform drawing. Checking the nozzle reports.
- Doing Squad checks and commenting on the vendor drawings.
- Interaction with Multi Office disciplines Civil, Process, and Stress etc.
- General Plot Plan and Equipment Layout preparation.
- Check & Review Clashes, and clear all clashes in clash report



3) BECREL ENGINERRING PVT. LTD. MUMBAI
BecRel Engineering Pvt. Ltd. is engaged in providing Design / Detailed Engineering Services as a Sub-contractor to Bechtel Corp., for the Jamnagar Export Refinery Project for Reliance at Jamnagar in Gujarat. Bechtel Corp is main Contractor engaged by Reliance to provide the EPPMCC services for the Jamnagar Export Refinery Project.
(Reliance Petro Chemical and Bechtel Engg. Pvt. Ltd. Joint venture)
The venture carries out the different design conditions for the worlds largest grass root refinery in Jamnagar i.e., Jamnagar Export Refinery Project (JERP).
Designation: -PDS Piping Designer
Project: - Jamnagar Export Refinery Project

JOB PROFILE:-
- Piping Modeling of Big bore & Small bore lines with the help of P & ID’s using PDS.
- Modeling of Major Equipments like Compressors, Heat Exchangers, Columns, Spherical Tank, Pumps etc. as per vendor drawing using Equipment modeling.
- Carrying out the Batch Extraction for the lines.
- Designing of Supports with the help of Support Standards using Piping and Equipment modeling.
- Isometric checking (Bill of material, Piping routing, P&ID/GAD, Support arrangement, Flow direction,)
- Coordinates (N, S, EL.) Piping Specifications, Location of Vent & Drains at appropriate locations, Accessibility)
- Check & Review Clashes in Smart Plant Review. (SPR)
- Coordination with Process, Mechanical, Civil, Electrical & Instrumentation.

4) M/s. SP CONSULTANT SERVICES, MUMBAI.
SP Consultant is a engineering design consultancy engaged in Piping Design & routing for Oil & Gas industry .Also engaged in design of Boiler & Pressure vessels.
Designation: Piping Designer
Client: – Reliance Petro Chemical
Project: - Jamnagar Export Refinery Project
JOB PROFILE:-
- Equipment and Piping Modeling as per Piping Layout, Equipment Layout & P&ID
- Isometric Extraction of using Isometric Drawing Manger
- Nozzle orientation as per the convenience of routing.
- Checking Isometric And MTO
- Place logical and physical support using Piping Equipment Model
- Preparation of piping layout.
- Preparation of GA Drawing.

5) RELIABLE CONSULTANT SERVICES, MUMBAI.
Engineering, Management and Construction Services to the Oil & Gas, Refining, Chemical, Polymer, Pharmaceutical, Environmental Protection and Transportation Industries.
Designation: - Piping Designer
Project: - Haldia Petrochemicals Ltd.
JOB PROFILE:-
- Drafting of Piping Layout, Isometrics and Equipment
- Proficient in preparing isometrics with MTO.
- Preparation of Isometrics.
- Help to Preparation Plot Plan Development.
- Draw Isometric, Pipe and Fitting Material Take Off
6) RELIANCE PETRO CHEMICAL LTD, MUMBAI
Designation: - Piping Draughtsman
Project: - Patalganga Power Plant
JOB PROFILE:-
- Preparing Piping Layout, Equipment layouts, Equipment Drawings, P & ID for isometric view in Auto cad 2000
- Developing piping general arrangement around columns, heat exchangers, compressors, turbines, pumps and various other process equipments.
- Preparing Piping Layout, Equipment layouts, Equipment Drawings, P & ID, Material specifications to draw isometric views on Isometric sheets.
- Preparation of GA Drawing

7) CAD SOLUTION, THANE.
Designation: - CAD / Microstation Operator
- Prepared Assembly & details drawings for dies, Tools & Machine Parts.
- Modification & Development drawing of dies, Tools & Machine Parts on exciting machine
- Reporting to Technical Office Manager.

*PDS DESIGNING & MODELING SKILL*
- Complete piping study with plot plan with P&I D’.
- Modeling Equipment as per vendor document.
- Routing Piping as per given P&ID.
- Modeling control valve stations, PSV’s, Flow elements etc. as required.
- Modeling Slope lines as per process requirement.
- Modeling required Piping Supports for critical lines.
- Updating stress comments in model.
- Modeling Structures & platforms for equipment and valve access.
- Modeling the access way to access the required stations and equipments.
- Modeling Pressure & Temperature instruments as per instrument hook-ups.
- Co-ordinate with other area members for Iso Interface checking.
- Checking clashes in model through Smart Plant Review clear and correct in Model.
- Extracting Isometric drawings and checking PDS Iso errors.
- Checking extracted isometrics with P&Ids and Checking MTO and commodity code.
- Finalise the routing with lead engineer and checker.
- Updating the Vendor and Process comments in model.

PERSONAL BACKGROUND
PASSPORT NO : H2759463
Nationality : Indian
Age : 31Yrs.
Date of Birth : 27 October 1979
Sex : Male
Language Known : English, Hindi & Marathi.

I am a very hardworking, explorative and sincere person with a great desire to use my utmost potentials and prove them through my work.
Date :
Place : Mumbai (Bhalchandra vachakal)

[Guest]

DHANANJAY KHADSE
25, Borale Nagar, Pandharkawada, Dist –Yavatmal
Contact : +91 9021323369; E-mail: dhananjaykhadse AT gmail.com
________________________________________
CHEMICAL ENGINEER
Seeking a challenging career with a dynamic organization across the industry that would help me cultivate & nurture my skills to the fullest with an opportunity to display my talent and become an asset to the organization________________________________________SUMMARY OF SKILLS
- Completed B. Tech (Chemical Engineering) from LIT, Nagpur.
- Got placed in ADANI- WILMER LIMITED a during Campus Placement was also a Finalist of IIT Kharagpur IDP named Petrocrat in 2010
- Actively participated in CONVENTION at I.I.T PAWAI Mumbai in 2008, also participated in poster presentation AZEOTROPY at I.I.T Mumbai in 2008 and participated in paper presentation at NPTI in 2009
- An effective team player with exceptional planning and execution skills coupled with the excellent interpersonal and communication skills along with clarity of fundamentals with perseverance to succeed and zeal to achieve results,
- Excellent performance in Scholarship, MTSE exam, was also selected in Navoday Vidyalaya
________________________________________
EDUCATIONAL QUALIFICATION
B.TECH (Chemical Engineering) - 2010
LIT Nagpur, 65.12%
Class 12th – 2006
ZP Junior College, Maharashtra Board, 75.67%
CLASS 10th – 2004
RS Vidayalaya, Pandharkawada, Maharashtra Board, 75.86%
________________________________________PROJECT
- Final Year project on Development of Software in VB for Design of Cooling Tower
TRAININGS
- In-plant Training at I.O.C.L. ,VASHI; MUMBAI
________________________________________PERSONAL DOSSIER
Date of Birth : 6TH November 1988
Languages Known : English, Hindi and Marathi
References : Available on request

[Guest]

DEEPAK KUMAR SETHIA
09654687979
deepaksethia08 AT gmail.com
deepakoshwal08 AT gmail.com
OBJECTIVES :
- To work with a progressive company with opportunity for growth, where I can utilize my extensive experience and knowledge in mechanical industries.
SYNOPSIS :
B.tech Mechanical engineer working with axial counsultancy as a piping engg fom dec2009 to till date.
QUALIFICATIONS in sequence :
- High School from BESB patna in year 1998.
- Intermediate (12Th) from BISC patna in year 2000 with 59%.
- B. Tech (Mechanical Engineering) from visveswaraiah technological university,belgaun,Karnataka in aug 2008 with 63%.
- Postgraduate Diploma in process piping design from AXIAL INSTIITUTE 0F PIPING &TECHNOLOGY
SOFTWARE PROFICIENCY
PDMS(plant design management system)
CAESAR-II(Static analysis)
AutoCAD.
ADDITIONAL TECHNICAL QUALIFICATIONS
Preparation of general arrangement drawings and piping isometrics from P&ID and equipment layout
Development of equipment layout.
Pipe rack and expansion loop design
Pipe span calculations and selection of supports
Piping material specification and valve data sheet
Pressure design of pipe and components
Wall thickness, branch reinforcement &PT rating etc
Flexibility analysis of piping systems.
Stress intensification factor calculations

KNOWLEDGE OF
International design codes & dimensional standards
ANSI/ASME, API, BS, ASTM etc & their use in design & analysis
PFD& P&ID Vendor drawing, process equipments, & plant layout Statutory bodies & regulations
PDMS SOFTWARE
Equipment modeling
Pipe work
Isodraft
Draft
Structures.
EXPERIENCE :
- 1yr 5months job experience in Airfrige industries New Delhi as Quality Control engg. (2008 nov – 2009 dec).
- JOB RESPONSIBILITIES & SKILLS : -
- Complete production and inspection of HEAT EXCHANGER,
- Selection of material, material procurement & preparation of TDC.
- Guiding out production and preparing tube layout markings.
- Have experience in complete production and quality check of numerous heat exchangers for various organizations like, IOCL, ONGC, NTPC, GAIL, BHEL, SAIL, PACL, DVC, etc.
- Knowledge of ASME, TEMA, IS and other related standards.
- Elaborate knowledge of drawings.
- Currently working, with axial piping as a process piping engg.
1. 3D MOUDLING ON PDMS.
2. PIPING LAY OUT & ISOMETRICS.
3. Stress Analysis& Support.
Stress Analysis for critical lines using CAESARII. Carried over stress analysis for lines connected with static &Rotary Equipments like.
STATIC EQUIPMENTS :- Tower, Heat Exchangers,Drums,reboilers,Pressure Vessels.
ROTARY EQUIPMENT :-Pumps.
We are done designing works as per National International Codes. Like ASMEB 31.1, ASME B 31.2, ASME B 31.3, API610, ASME VIII.
COMPUTER LITERACY :
- MS-Dos, Windows & Application Software – MS-Word, MS-Excel, MS-PowerPoint, Knowledge of internet.
- Auto Cad 2006
- PDMS
- CEASER-II
STRENGTHS :
- Able to work in stressful situation, keep to learning, friendly nature, self motivate and self initiated.
PERSONAL DETAILS :
Name : Deepak Kumar Sethia
Father’s Name : Manik chand sethia
Date of Birth : 03-Jan-1983
Gender : Male
Language Known : English, Hindi, and Rajasthani
Nationality : Indian
Marital Status : Single
Passport no. : G7588318
DECLARATION :
- I consider myself familiar with Mechanical Engg. Aspects. I am also Confident of my abilities to work in a team and as a team leader. I hereby declare that the information furnished above is true to the best of my knowledge.
Date………….
Place ………... DEEPAK KUMAR SETHIA

[Guest]

CURRICULUM VITAE
N. KRISHNA THEJA

Email : nagaraju.krishnatheja AT gmail.com

OBJECTIVE
I am currently looking for a full time position in an environment that offers a greater
challenge, increased benefits for my family, and the opportunity to help the organization advance efficiently and productivity.
WORK EXPERIENCE
2 years of experience in HPCL - MITTAL ENERGY LIMITED OIL REFINERY, BATHINDA, PUNJAB ,INDIA as OPERATING ENGINEER.
SKILLS
- COMMISIONING EXPERIENCE OF FLUIDISED CATALYTIC CRACKING UNIT(FCCU) IN OIL REFINERY.
- SOLVING TROUBLE SHOOTING PROBLEMS OF PUMPS,COMPRESSORS,PROCESS AREA etc.
- PROFICIENT IN MS OFFICE.
- 2 YEARS EXPERIENCE IN OIL REFINERY
EDUCATIONAL BACKGROUND
DIPLOMA Diploma in chemical engineering
Specialisation of petrochemicals/
GOVT. INSTITUTE OF CHEMICAL
ENGINEERING,VISAKHAPATNAM,
ANDHRA PRADESH.

INDUSTRIAL TRAINING(PROJECT) :
6 Months training in vizag steel plant in visakhapatnam.
6 Months training in HPCL refinery in visakhapatnam.

TRAINING SUMMARY
VIZAG STEEL PLANT :
A project on coke ovens department,Ammonium sulphate plant(PUSHKALA FERTILISERS) and overall plant functioning.
HPCL REFINERY :
A project on CDU’s, FCCU’s, DHDS units and overall plant functioning.

SSC S.R.K.V.N. HIGH SCHOOL,HYDERABAD,A.P.

(N. KRISHNA THEJA)

[khan.tausif40@gmail.com]

Er. TAUSIF KHAN
khan.tausif40 AT gmail.com
PIPING DESIGN & PIPE STRESS ANALYSIS ENGINEER
Career Objective :
Looking for a challenging and demanding position in Piping Design and Engineering in a growth oriented Mechanical Consulting, Contracting, Construction organization to render professional skills and add value to organizational growth and objectives.
Software skills :
- Piping Drafting : - Auto CAD

- PDMS :-
- Checking of package units, vendor drawings.
- Scheduling of Isometric as per the clients..
- Modeling for tall tower. Ladder arrangement as per the Norsok specification.
- Nozzle orientation as per General arrangement drawings received.
- Piping Design Engineer worked on Detail Engineering Project (Piping Isometrics, Equipments and Piping Layout, Vessel Nozzle Orientation, Rack piping and Tank Farm).
- Modeling of Equipment and Piping for different systems like process, flare, utility open drain and closed drain systems, Fire fighting system
- Data Consistency and Clash Checking for System
- Generation of Check Iso’s / Iso’s through Isodraft User level
- Structural modeling for temporary platforms.
- Modeling of supports for critical lines and for non critical lines as per support standard
- Extraction of 2d drawings(Like support drawings ,GA drawings) in pdms draft familiar with Labelling,2d drafting, dimensioning applications
- Familiar with PDMS Administrator.
MODULES
- Equipment modeling
- Piping Modeling
- Draft
- Iso draft
- Structure modeling
- Support Modeling
Academic Qualification :
- B.Tech in MECHANICAL ENGINEERING with 60% from DR.BAMU(DR.BABA SAHEB AMBEDKAR MARATHWADA UNIVERSITY), MAHARASHTRA, approved by A.I.C.T.E. (All India Council of Technical Education).

- Diploma in Process Piping Design & Engineering per ASME B31.3 from Institute of Piping Engineering and Building Services, Hyderabad.

- HSC from pune board with 78%.
- Ssc from pune board with 77%.
Technical skills :
- Proficient in - Preparation of G.A Drawings and Isometrics based on P&ID and plant layout.

- Pipe support and Rack design, Expansion loop design.

- Zero/Intermediate/Bulk level MTO.

- Piping Material Selection/Specification/Valve Data Sheets.

- -Pressure design of Process Piping and Component as per ASME B 31.3 [Straight Pipe, Flanges, Elbows and Miter bends, Reinforced branch connections, Blanks, Blind flanges, Expansion joints].
- Flexibility analysis of piping systems.
- Hydraulic design of Liquid Piping and Pipelines (Pipe sizing, Pump head & power calculations)
- Supervision of Piping & Mechanical Equipment Erection, Fabrication, Testing & Commissioning.
- Knowledge of
- PFD and P&ID
- Equipment drawings
- Plot plan
- Process plant layout
- Piping Welding, Erection & Testing.
*Familiar with Viz : ANSI/ASME, API, BS, ASTM & there use in design, analysis and calculation
- PDMS11.5, 12.00 (All modules), MS Access, and MS Excel.
- International Design codes & Dimensional standards.
Job Experience :

- 1 year experience in pipe designing on PDMS11.5, 11.6(All modules).
Seminar Undertaking :
- Seminar on ULTRASONIC TESTING.
Extra Cirricular Activity :
- Convener of an Interstate techno festival.
- Participate in ROBOTICS by making a portal ROBOT at National Level techno fest.
- Volunteer and co-ordinate in various techno fests.
Major Achivments :
- Got 2nd position in district level badminton competition.

- Played state level basketball for MARATHWADA ZONE.
Software Skills :
- Suitable with MS WORD, POWER POINT, MS EXCEL, AUTOCAD. PDMS11.5, 11.6(All modules)
Project undertaking :
- Project on “MATERIAL HANDLING SYSTEM USING KARAKURI TECHNIQUE”.
Hobbies :
- Interacting with new people.
- Listening Music.
- Netsurfing.
- Eager to gain knowledge.
- Playing computer games
Strengths :
Good communication skill, positive attitude, punctuality, self-motivation, confidence, supportive, creativity, teamwork, leadership qualities and hard work.
Declaration :
I hereby declare that all statement made about me are all true as for the best of my knowledge and belief. If any information is found to be false, I shall be responsible for the consequences.
TAUSIF KHAN