Eram Engineering Al Khobar Saudi Arabia : Certified Welders GTAW

[Admin]

Eram Engineering Al Khobar : Certified Welders GTAW
Company Name: Eram Engineering
Company Location: Al Khobar
Designation of the vacancy: Certified Welders GTAW
Company E-mail for contact: procurement@eramengineering.com
Company Website: www.eramengineering.com

Details of the job:
Certified Welders GTAW, must be having Aramco code.
Those who are stationed in KSA, can apply with strict confidentiality.

Eram Engineering India Ltd.
Behind Old Handloom House
Fort Mumbai, 400 001

Contact us :
Eram Engineering
Hail center, Suite No. 1334
PB No 76629, Al-Khobar 31952, Kingdom of Saudi Arabia

About us :
Eram Group is the leading organization in the industrial sector, providing inspection services, engineering, project management; construction of infrastructures & utility projects; maintenance; industrial material trading; information technology; waste water treatment systems; fabrication and Surface Coating; metal architectural cladding for infrastructures; operating in Saudi Arabia, Qatar, Bahrain, United Emirates, India and the Philippines. Over a decade, our passion for every detail of the work, at all levels, and the drive for continuous innovation has made Eram a preferred organization in the Industrial sector.

[Guest]

RESUME :
SRINU INAGANTI,
srinu_inaganti AT yahoo.com

Career Object :
Seeking a position as a sales/service/business development/technical support in engineering operations where my extensive knowledge and experience will be further developed and utilized.

Career profile :
- Extensive knowledge on power generation equipment (Diesel engines) and outboard motors (BRP Products).
- Extensive experience in service management techniques in engineering operations.
- Interact with clients/customers and demonstrated on multiple technical aspects.
- Responsible for planning, forecasting and implementation of sales plan, achieving sales targets, leading team.
- Demonstrated ability to function effectively as a mechanical engineer as well as working independently to achieve objects.
- Identify and develop relationship with corporate clients.
- Manage and maintain all spare parts in stock in periodic time, handling accessories and diagnostic system of Evinrude E-tech Outboard motors.
- Active participate in trade exhibitions and acquired the product knowledge day to day market scenario. And responsible for products handling.
- Share thoughts and ideas on business development with managers & directors of the company.
- Make technical reports of day to day work status send to engineering manger and sales & service reports to general manger.
- Committed to providing excellent customer service, and after sales support.
- Proven ability to manage projects from planning through execution. Ability to work under pressure in past –paced time sensitive environment.

Employment History :
dTECh Company pvt.ltd. Male, Maldives. Jan 2010 – April 2011
dTECh is a diversified engineering company which offer a wide range of products such as Deutz and Pramac generators and Bombardier recreational products like Johnson and Evinrude outboard motors, Seadoo.(CAT Gensets and CAT Marine engines) And other Engineering products. Provide excellent sales and service of these products and manage & maintain all the spare parts and accessory items.
Authorized dealer of these products and serve the quick service at in & around the Maldives.

Mechanical Engineer (sales & engineering operations) :
The Role :
- Lead and manage the operational engineering functions and resources ensuring all projects delivered to the highest industry standards.
- Develops a business plan and sales strategy for the market that ensures attainment of company sales goals and profitability.
- Participate in trade and industrial exhibitions, trade shows, seminars, live demos etc. to expedite market penetration and increased visibility of Company.
- Regular follow-ups with customers. And forecast market potential & generate leads.
- Evaluate and suggest product and service solution in line with client needs and requirements. Process & execute machine sale order.
- Generate and submit weekly project status and progress reports to the senior-level management to support business directive.
- Co-ordination of service and spares with a common goal to achieve customer satisfaction. Inspecting warranty job cards for necessary document.
- Maintain and update client information on company data base.
- Support to the service engineers on material handling and engineering operations.
- Support to the manger on sales and business development and govt. tenders &bids.

C.S Diesel engineering pvt. Ltd, Mumbai, India. Jan 2009 - Nov 2009
C.S Diesel engineering is a leading sales & service company which offer a Cummins generators and spare parts of Cummins power generation equipment. And dealt spare parts of L&T. Authorized sales & service distributor in North India.
Sales Engineer :
The Role :
- Sales of Cummins generators in and around the Mumbai.
- Developing and maintain sales proposals and collateral newsletters, broachers and many other materials related to marketing.
- Participate in trade and industrial exhibitions, trade shows, seminars, live demos etc. to expedite market penetration and increased visibility of Company.
- Regular follow-ups with customers. And forecast market potential & generate leads.
- prepare and manage correspondence, reports and documents and
Performed management duties in the region of Sales and provided support to the Sales manager.
- Maintain and update client information on company data base.
- Report day to day sales to sales manager and generate and submit weekly sales reports to general manager via sales manager.
Ratna infrastructure projects pvt.ltd, Hyderabad, India. Apr 2008 - Nov 2008

Ratna is a diversified construction company in India, which deals different construction and development projects like Mining, Material handling, Highways, Roads &Building, Flood flow canals, Sanitation projects and Irrigation projects.
Maintenance Engineer : (I got this job in my college campus interviews)
The Role :
- Maintain the operations of construction equipment like trucks, excavators, bulldozers, wheel loader, concrete mixture, hydraulic dumper, vibratory roller, tower crane and other transportation vehicles and Gensets.
- Evaluate and Inspect parts replaced under warranty, work Quality and Actual Time taken.
- Maintain appropriate spare parts and accessories of all construction machinery.
- Participate in trade and industrial exhibitions, trade shows, seminars.
- Allocate jobs to mechanics, supervision the work, arrange required tools and parts.
- Maintain log books, prepare report on work done by the mechanic and submit to manager engineering department.
- And support to the manager on Tax and insurance of the machinery.
- Maintain full-fledged fire and safety equipments in and around the construction and workshop area.
- Monitor all machinery performance on manufacturer recommended used hours and taken necessary action to get the optimum performance.

Education History :
- Bachelor of Technology in Mechanical Engineering at Acharya Nagarjuna University A.P, India. Secured first class with Distinction. 2005-2008.
- Diploma in Mechanical Engineering at State board of technical education & Training A.P, India. Secured first class. 2002-2005.
- Secondary school education at Home town. Secured first class. 2002.

Certification courses and Training :
- Certification of operations, maintenance, trouble shooting with diagnostic software’s On Bombardier recreational products. Acquired at Male, Maldives.
- Certification of operations, maintenance on Deutz generators. Acquired at Male, Maldives.
- Sales and business development training at Navy Mumbai, India.
- Certification of drafting and designing tools. (CAD/CAM) at Hyderabad, India.
- Certification of National cadet corps with B & C Certificates in the rank of senior company under officer. at Guntur, A.P, India.
- Certification of Basic leadership camp at Salam, Tamilnadu, India.
- Some of certificates on sports and extracurricular activities.

Software proficiency with CAD Tools :
- MS Office.
- Basics in ‘C’ language.
- AutoCAD (2D, 3D, GIS).
- Catia V5R16.
- Brief knowledge on Pro-Eng. and Ansys V10.
- Out board motor diagnostic software (Evinrude E-tech).
- Familiar on Browsing, outlook express, coral draw, Photoshop.
- Familiar on operating systems (windows 2000,XP, Windows-7, Vista)

Key Skills :
- Sound knowledge on outboard motors and diesel engines with diagnostic software’s.
- Demonstrated proficiency in verbal and written communication, analytical thinking, organization and planning, problem solving, attention to detail and interpersonal skills.
- Ability to work successfully as a member of a sales & service team.
- Commitment to success in the sales targets and on time service.
- Strong customer focused strategic planning, resource allocation.
- Meeting quality standards for service and evaluation of customer satisfaction.
- Vast knowledge on internal combustion engines and industrial engineering.

Interests and Hobbies :
- Active participate in Trade exhibition and technical product shows.
- Gathering catalogues, broachers, and operation & service manuals of industrial products.
- Long travels on company work and interact with clients.
- Fishing, bike riding, boat riding, gym, badminton, watching regional movies and listening business news.
- Spend leisure time with kith& kin, gardening.

[Guest]

Resume :
Trade : Mechanical Maintenance Engineer
Name : SanjayKumar Sahare
Email : sanjaysahare AT yahoo.co.in

Educational Qualification :-
Course School/University Year :
D.M.E M.S.Tech.Board,Bombay Sept.1983
B.E.Mech - Engg Poona University, Pune Oct. 1993
DBM Poona University, Pune April,1993
MMS Poona University, Pune April,1995

Work Experience :-
Company Name Position From To :
Allied Arabian Maintenance & Trade Co. Jubail Industrial City , KSA Maintenance Engineer (Mechanical Maintenance Dept ) 20/07/2009 Till working
Rama Petrochemicals Ltd,Patalganga Asst.Manager Engg. (Maintenance Dept.) 1/2/2008 19/07/2009
Deepak Nitrite Ltd.Apl.Div,Roha Asst.Manager Engg. (Maintenance Dept.) 16/04/1995 31/01/2008
Garware Nylons Limited,Pimpri, Pune Jr, Maintenance Engineer (Maintenance Dept.) 1/1/1990 15/04/1995

Total Experience :
21 years experience in chemical & petrochemical plant in maintenance department.

Rotary Equipment Experience : --
Aamco :
- Attended Albayroni EHN Plant shut down from 14/10/2009 to 15/11/2009 for Dresser Rand make Turbine Compressor Combination - 4 no’s of sets, under Aamco.along with manpower - 42 nos..Major & Minor Overhauling of Turbine and inspection, Overhauling, replacing of Compressor bearing. Final alignment & Ost Test.
Attended Fertilizer Plant shut down 25/11/2010 to 12/01/2011 In-house rotary equipment in Ammonia, Urea & Sea water section, Under Aamco along with manpower - 48 no’s ..in different sections. Major & Minor Overhauling of Reciprocating pumps, Turbine, Centrifugal pumps, sea water pumps, Centrifugal Compressor, Gear box, Torque Convertor, Motors, Replacing of pumps mechanical seals. Attending start up problems of Rotary equipments. Total -- 56 no’s of rotary equipments.
Attended EDC Plant Shut down 18/06/2011 to 5 /7 /2011…In-house rotary & static Equipments.. Centrifugal pumps, Gearbox, Replacing the motor, Elliott make three stages Compressor – Hyd test of oil cooler, intercooler, overhauling of Butterfly inlet valve, replacing lube oil turbo -32.

RPCL :
Preventive maintenance of Alternator - Turbine Combination - 1 set. Preventive maintenance of Turbine - Compressor Combination - 1 set.
Major & Minor Overhauling and Maintenance of KG Khosla make Air Compressor, Model CR 105 --- 2 nos. Major & Minor Overhauling and Maintenance of Ingersoll Rand make Nitrogen Compressor, Model CR105 --2 nos.
Preventive maintenance of DG set for Fire Hydrant System 150 kva - 1nos and Electrical DG room 250 kva -2nos ,150 kva -1 nos. Major & minor Overhauling ,Preventive maintenance of all types of Centrifugal pumps ,Receprocating pumps, Gearpumps,Centrifugal Blower for boiler ,Mazada make lobetype Blower,Gearbox for cooling tower & Arreator & Clarifier.

DNL :
Major & Minor Overhauling,Preventive maintenance of Refrigeration Compressor for Ammonia,Kirloskar make, model No : kc - 42. -- 4 set. Major & Minor Overhauling, Preventive maintenance of Air Compressor..Ingersoll Rand make , Model : Type 30 , Two Stage -- 2 nos. Major & Minor Overhauling Preventive maintenance of Air Compressor..Kirloskar Make,Model No: TC 50 -1 nos.
Major & minor Overhauling ,Preventive maintenance of all types of Centrifugal pumps- Jacketed & nonjacketed, with or without mechanical seal ,Reciprocating pumps, Gearpumps,Vaccum pumps, Centrifugal Blower for boiler ,Mazada make lobetype Blower,Gearbox for cooling tower - Arreator & Clarifier- Mixing vessels- Reactors- Autoclaves-Distillation Vessels.
Major & minor Overhauling, Preventive maintenance of all Agitator assembly for Mixing vessels- M.S / S.S Reactors- Autoclaves-Distillation Vessels - Glasslined reactor. Alingment of intermediate shaft- aligment gearbox +motor.

GNL :
Major & minor maintenance rotary equipment like --- Lobe type blower, Jacked – non jacked centrifugal pumps with/ without mechanical seals , lewa make jacketed – non jacketed dosing pumps, External – Internal gear pump, Vane pump, submersible pump, Centrifugal blower, Lobe type nitrogen blower, Torque Convertor, Centrifuge ,chips cutter – draw off devices, RotoryGate with gearbox, Tumbling Dryer,Ejector system pumps.
Major & minor mechanical maintenance of motor- flameproof - nonflameproof –replacing & repairing of rotor shaft – replacing bearing - assembly after electrical inspection.
Tumbling dryer system - 3 nos Major & Minor Overhauling of tumbling dryer - Repairing and repalcing of main hollow S.S.316 Shaft with their sealings like oil seals, O - rings & Bearing .Make it ready for suitable Under
Vaccum .
Major – minor overhauling for Agitators for Mixing vessels , Distillation vessels, Autoclaves, Hydroliser– main shafts – top & bottom mechanical seal – stuffing box – overhauling of gear box & motor – alignment of gear & motor
Major - minor overhauling & maintenance work carried out on V.K. tube of Nylon plant of N 1-N 2-N 3-N4 - N5 , Replacing of hot gear pump during change over the production – Overhauling of hot gear pump (spinneratte).
Major & minor mechanical maintenance of motor- flameproof - nonflameproof –replacing & repairing of rotor shaft – replacing bearing - assembly after electrical inspection.

Static Equipment Experience : -
SS RPCL :
Worked in Maintenance & Projects of Petrochemical Plant (Methanol)..Like…Reformer / Wasted Boiler 40T-2nos / Distillation Column-40 Mt height / Turbine Centrifugal Compressor Combination / Raw Water Plant / ETP plant / D.M. Plant / Natural Gas line Fabrication / NDT test of gas lines, boiler tubes & Critical Chemical process lines.
a)Major & Minor Overhauling of Reformer – Repairing of (11x2)4 = 88nos burner – Replacing of s.s belows lines - Replacing of springs & adjusting intial level of Vertical Tubes .Catalyst replacing from Vertical Tubes - 61 nos by using vacuum system - Replacing of bottom main header Pigtails tubes after cutting ,inspection of fitup joint, rewelding by gas welding using alloy filler wire P1 / P11 E R80 SB2 , heating , matching with required temp , Core weld ,D.P Test , final weld ,normal cooling under insulation, X- rays test - Ultrasonic test of Pigtails - 61 nos , bottom main header .
b) Major & minor Overhauling of wasted boiler 40 tonnes ,Economizer coil,Superheatercoil E103 40 tubes , E106A 142 tubes -B & E107 96tubes,Replacing of E 106 A /B with new coil bundle - Hydraulic Test of total Boiler loop at 65 kg.-Repairing & Overhauling of damper of ID & FD fan- Replacing & repairing of fabric expansion joint of ID / FD Fan & duct flow gas line 24" - Ultrasonic Test of boiler lines 40 ata, 22ata, 6ata - Overhauling & hyd testing of boiler valves and accessaries, Replacing all traps lines by gas welding method - Repairing and replacing of trap valves - Insulation work - Reconditioning & maintenaing of all boiler records as per IBR reglations for passing the boiler by Boiler Inspector.
c) Major and Minor maintenance of Distillation column - 40 mtr in height - 4 nos for Methenol Product- dismantaling of column sheel - distributor - collector - replacing of inside packings - Reboiler maintenance - 4 nos - Heatexchanger for cooling the product 6nos - repairing of dozing pumps ,Multistage feed pumps ,Repairing and replacing of column feed lines & Product line, Insulation work.
d)Preventive maintenance & Overhauling of Lube oil circulation system for Turbine & Compressor combination ,Turbine & alternator combination.
e)Major & minor Overhauling of water arreator and Clarifier in Raw water treatment plant .
f) Major and Minor Overhauling of Arreator , Clarifier in ETP .Repairing of Agitator's of Arreator & Clarifier , Overhauling and repairing of Gear box & Motor , Fabrication and replacing central drum of agitator shaft. Repairing and replacing of HDPE lines of Chemical addition system .
g) D M Plant .. Replacing of rubber lined pipe lines after fabrication work - Repairing and Replacing rubberlined diaphram valves from 1/2" to 4".
h) Errection & Commisioning of 6" C.S underground line - Shedule 80 for Natural gas from GAL distribution station to main plant approximate 500 mtr long . Inspection of fit up , Grinding work, Corewelding( with 7018 supertherm welding rod) , DP test , final welding , X - rays test , Rubber paint Coating , levelling of lines ,
i) Major & Minor Repairing of S.S heatexchanger… replacing of all SS304L U - tubes after inspection , Baffles plate fabrication and fitting with new tie rods, Tube welding on tube sheet , D.P test , Hyd Test at 75 kg / cm sq.
j) Major and Minor Overhauling of Cooling tower - 675 TR - 4 nos ,Make : Phaharpur make wooden Cooling Tower with 8 nos of Cooling fans

DNL :
Worked in Maintenance & Projects of Chemical process plant like Reduction Plant / Nitration plant / Mithylisation plant / MNCB distillation Column- PNC distillation Column – Xyline distillation Column / Hydrogenation Plant / OPDA Plant / Continuous nitration plant / MCA Plant / CF Plant / ETP / Common utility plant – chilling plant – absorption type chilling plant/ Fire Hydrant system.
a)Major & Minor Overhauling of furnace oil-fired – smoke tube Boiler- Kessel pack make 2 T - Steam star make -17 T – ACE make 4T -2 nos -Trouble shooting problem in running condition – Reconditioning of boiler as per IBR regulation for annual IBR inspection & Passing through Boiler Inspector. – Modification of IBR steam lines – Reengineering of steam Recovering unit. NDT of Boiler tube & shell.- Hyd-test of boiler shell as per Test Pressure. Installation of preheater in boiler.
b)Major & minor Overhauling / replacing, handling of all types of reactors such M.S.Reactor,S.S.Reactor,M.S.Glasslineed reactor, Mixing Vessel(C.S- Ni, cladding) F.R.P - Autoclave with impellers and agitator shafts of M.S – SS .Reactor.Replacing of Anchor blades,stirrer shaft, baffles,sparger's, blowlege line,Hydraulic Test of shell & jacket - Hydraulic test of staffing box jacket as per test pressure- Hydraulic Pressure of after fitting seafty valve at lift up pressure & with rapture disk. Repairing & Overhauling of Mechseal ( Burgman / Egale Poonawal / Selol /Durametallic seal) of Agitator , Hydroliser,Distlllation Vessel, Mixing Vessel & Pumps.Repairing & Overhauling of Gland Cooling system for agitator staffing box.
c) Major & minor Overhauling of Centrifuges in S.S / Rubber lined - top and bottom discharge types, balancing of centrifuges ,Alignment of input nozzles & bottom scrapper guide vane- Alignment of bottom pulley with motor.
d)Overhauling of Filter presses in manual / hydraulic. Replacing of PP and wooden plate and frame with their filter cloths , Pressure filters and sparkler filters.. Etc
e)Steam Ejector System – maintenaning constant steam pressure for steam nozzles & constant water pressure for water nozzle for two stage – Modification sucion line with suction priming Chember.
f) Major and minor overhauling of wooden Cooling tower (Cooling towers induced draft counter flow type) 600TR – FRP Cooling Tower 100TR – nos / 250TR -2nos / 350TR-2nos- Natural draft spray cooling tower 85 TR – 2nos, Replacing of spray nozzles – fan blades +motor - Alignment of motor to fan gearbox –replacing & repairing of cooling tower packing.
g) Fabrication of M.S seamless sch 40 . sch 80 – SS 316 – SS304 - IBR steam line sch 80 fabrication and fitting work with proper structural supporting as per plant requirement / modification under maintenance or Project work .
h) Major and minor Overhauling of various types of valves like - ball valves from ½” to 4” – gate valve 2’ to 10” – Audco make wedge type valve from 2” to 4” – klinger make steam piston valves from ½” to 8”- Pneumatic control steam valve- product valve- Plate sliding Pneumatic Control valve .
i) Major & minor Overhauling & Commissioning, irrection of Heat exchangers plant – chilling plant unit – distillation column – ejector system. Replacing of tubes – Repairing of leakages on tube plate – repairing of shell - tubeside & shell side chemical cleaning with sulphonic / Hcl acid.
j) Major & Minor Overhauling of Distillation columns ( Sulzar make) with distillation still in plant and Distillation Column 20mtsin height –4 nos --- Primary Column 48 mts height -4nos – Secondary Column – 30 Mts height- 4 nos use for MNCB – PNC – Xyleden Product. With top Head Condenser + Reboiler ( also including recirculation pumps + Ejector system + cooling tower + overhead tanks + storage tank + instrument control valves + steam controlling system with prv+steam recovery system )—mainly major work carried out under shut down . .. Dismantling & shifting of shells at one side – removing of all mellapacking 280 microns to 500 microns – inspection – chemical cleaning – hydrojet cleaning – reassembly of column with packing + distribution tray – inside intermediate filters with proper sealing compound & gaskets with HT bolts – handover to process people after pneumatic – vacuum test. Repairing of Overhead top Condenser of column in workshop .. replaced the tubes , inside baffles, repairing of tube sheet .. final hyd test on designed pressure.... Attended three shut down of Distillation Column.
k)Major & Minor Overhauling of ETP Arreator -2 nos,Clarifier- 2nos,Repairing and Replacing of Air blowing MS & HDPE lines in the air blowing system , Maintenance of Lobe Type Air Blower - 3 nos - Repairing & replacing of Gate valves size 10 " - Butterfly valves size - 6 " & 4 "
l) Major & minor Overhauling of Hcl scrubber system - Ammonia scrubber system . Overhauling of Graphaite cooler - Frp scrubber Tower- Fabrication of Frp lines with tanks & tower.

GNL :
Worked in Maintenance of Polymerization plant which produces Polyester chips & Nylons chips, Polyester & Nylons Yarn Recovery plant, Tyer cord plant which produces tyer cord chips.
a) Major - minor overhauling & maintenance work carried out on V.K. tube of Nylon plant of N 1-N 2-N 3-N4 - N5 , Replacing of hot gear pump during change over the production.
b)Major – minor overhauling & repairing of shell for Mixing vessels , Distillation vessels, Autoclaves, Hydroliser-- replacing of anchor blades – hydraulic test of vessel & jacket as per test pressure- Annual inside & outside inspection - Scrubber System .
c) Distillation system : Distillation Column mounted on distillation Vessel with top Condenser ( Poly - 2, Tc - 2. T5 - 2, T1-T4 -2 ) total - 8 nos. As per Production Planning during the Under shut down ---Cleaning of Top Condenser Tubes - Replacing Ceramic rings in the distillation Column - Inspection distillation Vessel main shaft allignment - NDT test of shell , Jacket - Overhauling of agitator assembly with gear box & motor .
d) Vacuum ejector system .. Replacing of water nozzle & steam nozzles - Overhauling and replacing steam & water lines valves - Overhauling of ejector Pumps - repairing of suction priming chember with suction line foot valve.
e)Tumbling dryer system -- 3 nos .. Major & Minor Overhauling of tumbling dryer -- Repairing and repalcing of main hollow S.S.316 Shaft with their sealings like oil seals, O - rings & Bearing . Make it ready for suitable Under Vaccum .
f)Nitrogen blowing system - Repairing of two way - threeway S.S. diverting valves up 10" - Repairing & replacing of s.s. blowing lines .
g) Major & Minor Overhauling & Repairing of Heatexchanger -- shell & tube Type & Reboiler -- Hydraulic test as per their test Pressure - Repairing of tube sheet - Inlet / out nozzles with pad - Dome partation plate.
i)Major & minor Overhauling of Cooling tower (phaharpur make )-cooling tower fan- adjusting blade angles asper require exit draft & motor current.
j ) Repairing of different types of valves- ball valves up to 4" , gate valves up to 14 "- Pneumatic control valves up to 3" - Audco wedge valves up to 4" - jacketed valves up to 4"

Remark :-
Attended …Overall Maintenance –Shutdown Maintenance – Break down Maintenance of Rotary & Static Equipment’s.
Controlling Annual Statuary Requirement’s & maintaining spare parts inventory of critical rotary & Static Equipment’s under maintenance Dept. for ensure ready availability of materials conduct stock verification and documentation. maintain reduced inventory levels. to meet production targets.
Preparing Planning Schedule of maintenance job – Special maintenance Tools & Inspection & Measurement of Rotary & Static Equipment’s for controlling the quality & reliability.PrepareIing of failure analysis, preventive, predictive and breakdown reports; supports minimization of downtimes
Proactive in identifying areas of obstruction / breakdowns; can take steps to rectify the equipments through application of trouble shooting tools.increase machine up time - equipment reliability -productivity- improving quality.
**Execute cost savings and energy savings techniques / measures; modify to achieve substantial reduction in O&M expenditures, also work within budget.
**Ensure adherence to quality standards (ISO 9001-2000), maintain all related documents.
**Completed Primavira Course from 13.02.2011 to 24.02.2011,
Duration : 40 hrs,in cadd center Training Center,Vashi ,Mumbai

I hereby decleared that above all information given by me is true as per my knowledge.

Please consider my cv for above post , kindly give me positive reply .

[Guest]

Rahim T A to hari
show details 1 :36 PM (0 minutes ago)

Dear Sir,

Now I am working in SAUDI ARAMCO bulk plant on behalf of M.S AL-SUWAIDI INDUSTRIAL SERVICES as senior tele-communication QC inspector.I am SAUDI ARAMCO AND SABIC aproved tele-communication QC.Also I got aproival from SAUDI ARAMCO for fiber optic cable splicing and testing.Also I am SYSTIMAX certified SCS design Engineer.
Also i am having NDT LEVEL II certification in RADIOGRAPHY TESTING(RT).

Thank you and Best Regards,
Rahim T A
EMAIL :rahim.thalachiraaliyar AT aramco.com

[Unregistered]

Angelito D. Samson
Block G-7. Lot No. 18 SIR New Matina Phase 2
Davao City, Philippines
Email Address : angelitosamson398 AT yahoo.com

Career Objectives :
Enhance my ability to contribute to the success of an organization by fully utilizing my experience, skills and knowledge in the field of welding works to meet ahead the project specification requirements, in a position offering growth and increasing levels of responsibility.

Position Applied For : Welding Foreman / welder gtaw smaw

Qualification Summary :
I had more than 21 years of experienced working as a Welding Foreman and as a Multi
Qualified Welder on fabrication and installation of pipe racks, fabrication and erection of various
pipes on both above ground and under ground installation, fabrication, installation and erection of
various pipes of different sizes, piping class and structural components for modernization, and newly built
refineries. The project concerns mainly on erection and rehabilitation of Power Plant Bark Boiler,
and Petroleum industry projects, both in domestic and foreign countries.

Qualified of the following Procedures :
Type Of Filler Wire / Welding Rod Welding Process Position :
E6010 and E8018 API 1104 (Downhill) 6G
E7010 and E7018 SMAW (Uphill) 6G
ER 70S and E7016 GTAW / SMAW 6G
ER 70S-2 GTAW 6G
ER 70S-2 and E7018 GTAW / SMAW 6G
ER 316L GTAW 6G
ER 316L and E316-L GTAW / SMAW 6G
ER NiCr-3 GTAW 6G
ER NiCr-3 and E NiCrFe-3 GTAW / SMAW 6G
ER NiCrMo-3 and E NiCrMo-3 GTAW / SMAW 6G
ER CuNi GTAW 6G
TGX 316L GTAW 6G
ER 70-6(1/2”Dia.)
GTAW 6G

Work Experience :
Employer : M.S AL-SUWAIDI
Address : P.O Box 991, Jubail 31951 K.S.A
Period : Feb. 05, 2009 up to this present
Position : Welder Maintenance and Fabricator
Project : SAUDI KAYAN PETROCHEMICAL COMPLEX
Job Description :
Operates and maintains various welding equipment and tools, under close supervision to execute welding and fabrication projects on plant machines and structures, pipeline in accordance with company specification and safety procedure. Carries out various skilled welding types such as oxy-acetylene, electric, arc, TIG, plasma, brazingand other welding of
carbonized, stainless and low steel, cast iron aluminum and other metals to form high and low pressurevessels,temperature pipelines,steps,platform and other equipment in all types of service, in the central workshop and on site. Prepares and checks surfaces, edges and vessel for removal or modification.

Employer :Belleli Energy Spa
Address :3rd Floor # 26 Bin Jahan Al Kuwari Compound,
Al Sadd St. Doha, State of Qatar P.O. Box 24205
Period :September, 2006 to July,2008
Position :Welding Foreman
Project :CTJV JOINT VENTURE PROJECT
Qatar Gas & Ras Gas LNG Plant Project
Job Description :
- Supervision of welders and pipe fitters at fabrication shop and in site erection area at CTJV
Joint Venture Project. Take oral and written instruction from construction department head of daily work instruction and assignments. Disseminate workers crews to their respective area of assignments according to daily work schedule. Preparation of equipment as per daily work schedule. Monitoring of welding activities to ensure good quality and workmanship and ensure that proper welding procedure specification are used onspecific welding joint. Visual inspection on accomplished work done on a day to day basis. Prepare reports on all daily and shift activities including workers man-hour. Routine inspection of workers activities at site and in shop to ensure safety procedures and instruction are properlyfollowed and
implementation of proper area housekeeping. Prepare monthly accomplishment report.

Employer :GAMA Endustri Tesisleri Imalat ve Montaj
Address :Ataturk Bulvari No.229 Kavaklidere,Ankara
Period :April 2005 to Dec. 2005
Position :GTAW/SMAW Welder
Project :CTSD Sakhalin II Project LNG Plant
Utility/Offsite/OET Piping and Steel Erection
Prigorodnoye,Korsokov,Sakhalin
Job Description :
- Conducts complete joint penetration welding using GTAW/SMAW process, on pipes with different classes, such as regular Carbon Steel, Carbon Steel NACE, Low Temperature Carbon Steel, and Stainless Steel pipes with 2” below and unlimited diameters of pipes assigned at fabrication and site erection for Sakhalin 2 Project LNG Plant .

Employer : Hyundai Engineering and Construction Ltd.
Address : NC41 On Shore Plant, Mellitah. P.O. Box 80062, Tripoli, Libya,
Period : April, 2004 to December, 2004
Position : GTAW/SMAW Welder
Project : NC41 Onshore Plant
Job Description :
- Conducts complete joint penetration welding using GTAW/SMAW process, on pipes with different classes, such as regular Carbon Steel, Carbon Steel NACE, LowTemperature Carbon Steel, and Stainless Steel pipes of different sizes and thickness on fabrication shop and site erection for NC41 Onshore Plant Project, at Mellitah, Libya.

Employer : Metal Services for Trading & Contracting Company
Address : Bugshan Building,Opp. SNAS Highway, P.O Box 12290,
Dammam, 31473 Kingdom of Saudi Arabia
Period : August 2000 to December, 2003
Position : GTAW Welder/ SMAW Welder/ Downhill (1104) Welder
A.) Project Assignment : SSSP (Saudi Strategic Storage Project) Yanbu, Site 7 (Aug. – Dec. 2003)
Project : Multiple Main Supply Pipeline from Yanbu Refinery to Medina
Receiving Station.
Job Description :
- Conducts complete joint penetration welding using GTAW/SMAW process on Multiple Main Manifold Blow down line, Discharge line and Mechanical Piping of Scraper Trap and Shipping Pump for Diesel, Jet Fuel, and Gasoline Product. Including Hot Tapping of Tie-in joints.

B.) Project Assignment : Saudi Aramco Ghazal Remote Header & Main Manifold (Jan. – Aug. 2003)
Project : Main Manifold and Remote Header
Job Description :
- Conducts complete joint penetration welding using GTAW/SMAW process on Main Manifold for Supply Pipe line with Inconel claded material.
- Conducts complete joint penetration welding using GTAW/SMAW process on Relief Header and Stock Header with Inconel claded material.
- Conducts complete joint penetration welding using GTAW/SMAW process on Main Manifold for Blow down line with Stainless Steel pipes material.
- Conducts complete joint penetration welding using GTAW/SMAW process on Mechanical Piping of Metering Skid and Corrosion line with Stainless Steel pipe material.

C.) Project Assignment : SSSP (Saudi Strategic Storage Project) Yanbu, Site 7 (Nov. 2001 – Dec. 2002)
Project : Multiple Main Supply Pipeline from Jizan Bulk Plant to Abha
Receiving Station.
Job Description :
- Conducts complete joint penetration welding using API 1104 (Downhill) process on Multiple Main Supply Pipeline for Diesel, Gasoline, and Jet Fuel Pipeline. And Tie-in joints from Jizan Bulk Plant to Abha Receiving Station.
- Conducts complete joint penetration welding using GTAW/SMAW process on Mechanical Piping at Jizan Bulk Station, including Hot Tapping tie in joints.
- Conducts complete joint penetration welding using GTAW/SMAW process on Scraper Trap Discharge line from Booster Pump to Scraper trap.
- Conducts complete joint penetration welding using GTAW/SMAW process on Fire Water line.

D.) Project Assignment : Saudi Aramco Harradh Khuff Gas
(Feb. 2001 – Nov. 2001)
Project : Well head and Supply Pipe line Manifold
Job Description :
- Conducts complete joint penetration welding using GTAW/SMAW process on Manifold, Blow down line, Flare line, Killed Carbon Steel line, and Corrosion line with Stainless Steel material and dissimilar material (Carbon Steel to Stainless Steel).

E.) Project Assignment : SCECO Riyadh
(Oct. 2000 – Feb. 2001)
Project : Power Plant 8 and 9
Job Description :
- Conducts complete joint penetration welding using GTAW/SMAW process on Conversion Pipeline, from Gas to Fuel.

F.) Project Assignment : Dammam Main Fabrication
(Aug. 2000 -Oct. 2000)
Job Description :
- Pre-qualification and Trainings.

Employer : P.D.M. Saudi Arabia
Address : Yanbu Saudi Arabia
Period : April 1998 to March 2000
Position : GTAW/SMAW Welder
A.) Project Assignment : SSSP (Saudi Strategic Storage Project) Abha, Site 6
(June 1998 – March. 2000)
Project : Underground Storage Tank and Mechanical Piping
Job Description :
- Conducts complete joint penetration welding by using GTAW process on Drainage System Pipeline with Stainless Steel material.
- Conducts complete joint penetration welding by using FCAW / MIG process on Wall Lining, Ribs, Roof Lining and Module for Underground Storage Tank.
- Conducts complete joint penetration welding by using GTAW/SMAW process on Mechanical Pipeline for Pump Rooms and Power Generation Area.

B.) Project Assignment : P.D.M. Saudi Arabia
(April -June. 1998)
Job Description :
- Pre-qualification and Trainings.

Employer : E.E.I Corporation
Address : Libis Quezon City.Phillippines
Period : February 1997 -March 1998
Position : GTAW / SMAW Welder
A.) Project Assignment : Sual Power Plant, Pangasinan, Philippines
(July 1997 – June 1998)
Job Description :
- Conducts complete joint penetration welding using SMAW process on Condenser Pipeline Assembly.
- Conducts complete joint penetration welding using GTAW/SMAW process on Mechanical Piping.

B.) Project Assignment : E.E.I. Fabrication, Bauan, Batangas Philippines
(February 1997 – June 1998)
Job Description :
- Conducts complete joint penetration welding using SMAW process on Pressure Vessel Tanks for La Tondena Project.

Employer : A.B.V. Rock Group K.B.
Address : Riyadh Kingdom of Saudi Arabia, Site 1
Period : April, 1993 to November 1996
Position : SMAW/FCAW Welder
Project : Underground Storage Tank Assembly
Job Description :
- Conducts complete joint penetration welding by using SMAW/FCAW process for Underground Pressure Vessel Tank.
- Conducts complete joint penetration welding using GTAW/SMAW process on Mechanical Piping.
- Pre-qualification and Trainings.

Employer : B.F. Metals Corporation
Address : Cainta Rizal, Philippines
Period : June 1990 –
March 1993
Position : SMAW / GMAW /FCAW Welder
Project Assignment : B.F. Metals Corporation Fabrication Shop
Job Description :
- Conducts complete joint penetration welding using SMAW / GMAW /FCAW process on Structural Steel Works.

Personal Data:
Birth date : November 24, 1970
Birthplace : Quezon City, Philippines
Sex : Male
Height : 163 cm.
Weight : 62 kilograms
Citizenship : Filipino

Angelito D. Samson
Name & Signiture

Enclosure:
Qualification Certificates