www.attechnologies.co.in AT Technologies Pvt Ltd Pune : Hypermesh CAE Engineer

[Admin]

AT Technologies Pvt Ltd Pune : Hypermesh CAE Engineer
Website : http://www.attechnologies.co.in

About us :
AT Technologies, located at Pune, India is a technology-based Engineering Services Provider whose main objective is to transform its technology ‘know-how’ into reliable solutions to the Engineering problems of the industry. In the long run we are targeting end to end solutions to the industry at large. We are focused on achieving our objective with our existing pool of experienced resources and a commitment for investment in technology with the business demand.

We are providing services to the industry in structural strength related aspects like stress analysis, stiffness evaluation, fatigue failure problems, coupled thermal structural analysis, crash event analysis mainly in Automotive Sector and also in other sectors like consumer goods, Industrial machineries etc.

Our core expertise is in the area of CAE

CAE Engineer :
Experience required : 6 months - 1 year in CAE related to structural strength
Educational Qualification : BE or ME
Skills : Good at Hypermesh (shell and Brick) ANSA Nastran or Ansys will be added advantage
Responsibility : Execute CAE projects
Remuneration : as per industry standards

Contact us :
AT Technologies
1, Peninsula Building,
Near Baner Telephone Exch.
Baner, Pune (Maharashtra)
India - 411045
Tel. No. : +(91)-(20)-40789621
Mobile No. : +(91)-(98)-90423881
Email : info@attechnologies.co.in

[Guest-IJT]

CURRICULUM VITAE

A. PERSONAL
NAME : SURAJIT ROY
FATHER’S NAME : SRI SUKUMAR ROY
ADDRESS : 60/3, SHYAM PUKUR STREET ,
KOLKATA-700004
CONTACT NO : 9239514976
DATE OF BIRTH : 21.08.1981
AGE : 28
NATIONALITY : INDIAN
SEX : MALE
MARITAL STATUS : SINGLE

B. EDUCATIONAL QUALIFICATION (ACADEMIC)

EXAM PASSED BOARD GRADE % OF MARKS YEAR
MADHYAMIK W.B.B.S.E 1st DIVISION 71.1 1998
H.S W.B.C.H.S.E 1st DIVISION 63.0 2001

C. EDUCATIONAL QUALIFICATION (TEACHNICAL)
COURSE TAKEN : DIPLOMA IN ELECTRICAL ENGINEERING
NAME OF THE INSTITUTION : CENTRAL CALCUTTA POLYTECHNIC, KOLKATA
YEAR OF PASSING : 2005
EXAM PASSED MARKS OBTAINED %OF MARKS
SEMESTER I 290 82.9
SEMESTER II 1012 81.0
SEMESTER III 764 76.4
SEMESTER IV 829 82.9
SEMESTER V 717 79.7
SEMESTER VI 940 85.5

OVERALL PERCENTAGE OF MARKS IN DIPLOMA : 81.6

D.WORKING EXPERIENCE : I) MAKPOWER TRANSFORMERS PVT . LTD.
FOR 2 YEARS.
II) CALDYNE AUTOMATICS LTD .
FOR 2 YEAR.
III) SHYAMA POWER (I) LTD.
FOR 1 YEAR.

AS AN TEACHNICAL STUFF AND AUTO-CAD DRAFTSMAN (ELECTRICAL).

MY JOB PROFILE
I perform different type of Electrical Drawing’s as under
A . Transformer : (i)Different type’s of Transformer view such as Top-view, Side-view, Front-view of In-door & Out-door type ONAN, Dry type transformer in different voltage-Ratio’s 33/11kv, 11/0.433kv, 6/3.3kv, 6.6/0.433kv etc. (ii) Name Plate Drg of Transformer .
(iii) Channel Drg of Transformer.
(iv) General arrangement & Tank Drg of Transformer.
(v) Cable box details of Transformer.
(vi) Assembly Drg of Transformer.
(vii) Foundation plan Drg of Transformer.

B . Control-panel Drawing : a)Single line diagram ,b)Power circuit diagram,
c) Control circuit diagram , d) General arrangement drawing ,
e) Bus-duct drg etc .
C. Different type of Structural & Febrication Drawing.
D. Different type of Electrical Project Drawing & Design.
E. Different type of insulators.
F. Overhead electrical (HT line materials & LT lines).

DATE: 06.04.2010 Surajit Roy
PLACE: KOLKATA
SIGNATURE

I BELIEVE THAT ALL INFORMATIONS ARE TRUE TO THE BEST OF MY KNOWLEDGE.

[Guest]

RESUME
Name : Varma Santosh Nandkishor.
Email-id : .varmasantosh87 AT gmail.com santosh.varma75 AT yahoomail.com
To Prepare myself for a challenging & demanding career which makes me special terms of intellectual ability & gives me needed job satisfaction and utilize my knowledge and skills for betterment of organization.
Academic Seminars :
PG Seminars :
1) “Analysis of weld induced angular distortion”
2) “Design for Six Sigma with Simulation”
3) “Modeling & Analysis of Conveyor Systems”
UG Seminar :
“Sub-marine drag Reduction technology”
Academic Projects :
UG Project :
Completed project sponsored by Mahindra Sona Ltd. Nasik, on topic “Design, manufacturing and tryout of spot facing fixture for serrated flange yoke”
PG Project :
“Design and Analysis of Roller conveyors for weight optimization and material saving”
Software Skills :
Course Undertaken : Diploma in Computer Aided Design
Institution : CADCAMGURU Solutions Pvt Ltd, Pune
Duration : 6 months
Software
Skill Competency Level of skill
Catia V5 R19 Part Modeling, Assembly, Surfacing, Drafting Knowledge in Part Design, Assembly, Drafting.
Ansys 11.0 Static analysis, Modal analysis, Transient analysis and Optimization analysis (APDL) Good understanding.
Hypermesh Surface meshing
Solid map Hexa-meshing Good understanding.
Auto CAD – 2008 Drafting & Detailing Excellent knowledge in drafting

Sr.
no. Examination
Year of Passing Name of University / Board Percentage of Marks obtained
1. M.E. (Design) 2011 Pune University Appear
(Final Semi.)
2. B.E. (Mechanical) 2009 Pune University 61.93
3. Higher Secondary Certificate(H.S.C.) 2004 Nasik Board 54.00
4. Secondary School Certificate (S.S.C.) 2002 Nasik Board 64.80
Personal Traits :
- Good problem solving ability.
- Positive approach, self motivated.
- Hard working ability and Sincerity.
- Good communication skills.
- Like to learn new things.
- Active member of BAPS Swaminarayan Sanstha and worked in public relation dept of Sanstha.
- Completed Yes+ course from Art of Living.
- Got first prize in singing competition in college function.
- Actively participated in debate and sports competition.