Resume CV : Mechanical Tool Design, CATIA, FIDES

[pruthvibm]

CURRICULUM VITAE
PRUTHVI B.M

Objective :
Seeking a creative, challenging and growth oriented career to enhance my skills and to excel in it by hard work and determination.

Work Experience :
Having 2.5 years of experience in BIW (Body in White) in Augen Technologies Software Solutions Private Limited, Bangalore as a Jr.Design Engineer.

Educational Qualifications :
- Bachelor of Engineering in Industrial Production and Engineering with an aggregate of 70.0% from JNNCE, Shivamogga – Graduated in 2007.
- Pre-University Course from DVS Independent College, Shivamogga in the year 2003 scoring 76.7%
- SSLC from DVS high school, Shivamogga in the year 2001 scoring 73.3%

Computing Knowledge :
Modeling and Detailing CAD Packages : CATIA V5, FIDES.

Work Details :
# Augen Technologies Software Solution Pvt Ltd.
Body in White :
BIW is a stage in the automobile manufacture where car body sheet metal(door, hood, deck lids etc) has been assembled before the components (chassis, motor so on) and trim (wind shield, seats etc) have been added.

3D Modeling :
- Designing of Welding fixtures
Designing for the complete body shell (side body, under body, enclosures etc) for the geo, respot and marriage stations.
- Designing of Checking fixtures & Roller Hemming fixtures
- Designing of Robotic Grippers, Combo Grippers
- Designing of Robotic Grippers, Combo Grippers, Buffers(Storage), Docking stands,
Pull off carts and so on.

2D Drafting & Detailing :
Generating the 2D drawings for the designed 3D fixtures which includes
- Creation of Bill of Materials
- Detailing of units in the fixtures
- Preparation of Layout sheet (for the single unit)
- Preparation of key sheet (for the Station)

I am involved in solid modeling, and detailing using, CATIAV5 and FIDES
Project # 1 : ABB (TATA WTP)
Software : Catia V5
Role : Team member
Client : ABB-INDIA
Location : Augen Technologies Software Solution Pvt Ltd, Bangalore
Description : 3D finish and detailing of Welding Fixture for Truck

Project # 2 : ABB FRANCE
Software : Catia V5
Role : Team member
Client : ABB FRANCE
Location : Augen Technologies Software Solution Pvt Ltd, Bangalore
Description : Detailing of welding fixtures and generation of bill of material (BOM).

Project # 3 : STEEL WELD
Software : FIDES
Role : Team member
Client : FORD USA
Location : Augen Technologies Software Solution Pvt Ltd, Bangalore
Description : 3D finish and Detailing of welding fixtures and generation of BOM.

Project # 4 : IMPEK
Software : FIDES
Role : Team member
Client : JAGUAR
Location : Augen Technologies Software Solution Pvt Ltd, Bangalore
Description : 3D finish and Detailing of welding fixtures and generation of bill of material (Stock list).

Project # 5 : VALIENT
Software : CATIA
Role : Team member
Client : BMW
Location : Augen Technologies Software Solution Pvt Ltd, Bangalore
Description : Designing, Detailing of welding fixtures using Carisma structure and generation of bill of material.

Project # 6 : KUKA
Software : FIDES
Role : Team member
Client : FORD
Location : Augen Technologies Software Solution Pvt Ltd, Bangalore
Description : 3D finish and Detailing of welding fixtures and generation of bill of material (Stock list).

Project # 7 : VW120
Software : Catia V5
Role : Team member
Client : VOLKSWAGEN
Location : Augen Technologies Software Solution Pvt Ltd, Bangalore
Description : Detailing of welding fixtures and generation of bill of material using KSL software.

Project # 8 : Schulz (AUDI)
Software : Catia V5
Role : Team member
Client : Schulz Engineering
Location : Augen Technologies Software Solution Pvt Ltd, Bangalore
Description : Detailing of welding fixtures and generation of bill of material using KSL software.

Personal Details:
Date of Birth : 08-October-1985
Gender : Female
Language Known : Hindi, Kannada and English.

Declaration:
I here by declare that, all the above given information are true to the best of my knowledge and belief.

(PRUTHVI.B.M)

[Guest]

JAYARAMU.M.H
EMAIL : jayaram.mh AT gmail.com

CAREER OBJECTIVE :
Seeking a promising position in the company that provides me a challenging career for my growth, I consider myself as a fast learner and a team player had gained rapid development in personal and professional front as a result of determined approach and progressive attitude in finding new solutions.

ACADEMIC PROFILE :
Name of Degree Branch College University Year of passing Overall Percentage :
B.E MECHANICAL Ghousia College of Engineering-
Ramanagaram. Visveshwariah Technological University, Belgaum September 2008 68.78%
P.U.C P.C.M.B Al-Flha P.U College-Magadi Karnataka State Pre University Board May 2004 68.88%
S.S.L.C GENERAL Sri SaraswathiVidya Mandira-magadi Karnataka State Secandary Educational Board March 2002 74.54%

ACADEMIC PROJECT :
"PERFORMANCE ANALYSIS ON INTERNAL COMBUSTION ENGINE USING ETHANOL BLENDED WITH DIESEL FUEL”.
Thus our project constituted of introducing ethyl alcohol in to the compression ignition engine. Then this ethyl alcohol blend is mixed with diesel at some percentage.
The percentage of mixing depends on the performance of IC engine. Looking out for any significant changes and result in the performance, efficiency and the exhaust gas. The experiment was carried out and increase in efficiency and decreasing in carbon content in exhaust was achieved under text condition.

WORKING EXPERIENCE :
COMPANY : Bharat Electronics Ltd.
DESIGNATION : Contract Engineer in Material control & Purchase in Naval System.
DURATION : September 2008 to till date.
ABOUT COMPANY :
Bharat Electronics Ltd (BEL) is a largest manufacturer of Defense and Civil Electronics equipments like Radars, Sonars, Communication, Avionics and Warfare equipments, EVMs and Electronic components. It is a Navaratna company and a global competitor of Defense electronics.
BEL is one of the large and best suppliers of NAVAL SYSTEMS products to the Defence and Civilian customers. Some of the products are
1 Sonars and Transducers.
2 Gun Fire Control Systems for Naval Platforms.
3 Optical Director Systems for Naval Guns.
4 Communication Control Terminal Desk.
5 Receiver Aerial Exchange.
6 Doppler Weather Radar Using Technology of ISRO.
7 Digital Mobile Radio Relay.
8 Digital Flight Communication Control, supplied for HAL.
ROLES & RESPONSIBILITIES :
1 Understanding the business organization structure of material management and relevant configuration like Purchase organization, valuation area plants, storage location, and warehouse structure etc.
2 Diagnose SAP issues by contacting end users to understand problem, and perform research and Executing the needed changes in configuration
3 Coordinating with both internal, external customers and suppliers relative to the quality issues.
4 Responsible for troubleshooting the issues in the system and providing support to the middle management to smoothen the flow in pipe line.
5 Inspecting of all manufactured and purchased parts physically as per standards.
6 Vendor evaluation, document verification, Air Waybill verification etc.
7 Co-ordinate with Finance dept for invoice verification, Payment related issues.

SAP RELATED WORKS IN MATERIAL CONTROLE & PURCHASE :
- Ware House management.
- Inventory management.
- Logistic Invoice Verification (LIV).
- Creation of Goods receipts (GR) for purchase order.
- Creation of Goods issue for store request ,production Order, And for purchase order.
- Creation of service entry sheet.
- MRP Run and Planned Order Conversion to PR’s / Production Order.
- Receiving Vendor’s Quotations and making comparative statements of vendor cost.
- Generate PR/PO/STPO as per requirement.
- Generation of Store Request & Reports for progress monitoring.
- Maintaining approved vendor directory.
- Creation of source list

PROFESSIONAL SKILLS :
- Good knoladge in MECHANICAL streem related subject
- Ability to use Enterprise-wide information system such as SAP/ERP
- CATIA-V5.
- Ability to work in Windows 98, windows2003, windows 7,
- Working knowledge of networked environment using a windows/ or windows like interface using power point, Excel, word and outlook software programs at an intermediate to advanced level.

ACHIVEMENTS :
1 Paper presented on SAP – MM module and its significance in BEL-Naval System.
2 QCC for reducing cycle time in withdrawal of items from stores.
3 Comparatively I Reduce the inventory in material control, hence it tends more prafit.

PERSONAL TRAITS :
1 A flexible hardworking team player with a breadth of analytical skills and a result oriented approach with the ability to absorb new concepts and being productive in the shortest available time.
2 Remain engaged, proactive and positive even in tough circumstances.
3 Ability to communicate with quality, integrity and respect in a way that inspires others and encourages innovation and possibilities.
4 Bring out the best in the others and recognize the value in every person’s contribution.

[Unregistered]

Hello PRUTHVI B.M
Just saw your resume. I just want to know more about Fides. Are there any sites ?

Thank you