AutoMobile Vehicle Integration : Chennai

[Admin]

An OEM Chennai : Asst / Deputy Manager-Vehicle Integration
Company Name: An OEM
Company Location: Chennai
Designation of the vacancy: Asst / Deputy Manager-Vehicle Integration
Company E-mail for contact: dhivyashri@global-network.co.in
Company Website: www.global-network.co.in

Details of the job:
Educational Qualification:
B.E/B.Tech - Mechanical/Automobile with 5 - 7yrs of exp

Job Profile:
> Conceptualize design solutions for Vehicle (Frame, Suspension, Brakes, Wheels & Seating etc) based on customer requirement and technology upgradation.
> Detailed design layout and component
> Design confirming product reliability by implementing design tools like DFMEA, DFM, etc
> Verification of design through design analysis using cad tools / Engineering calculations.

If interested send me your updated resume to dhivyashri@global-network.co.in

[Admin]

An OEM Chennai : Asst / Deputy Manager
Company Name: An OEM
Company Location: Chennai
Designation of the vacancy: Asst / Deputy Manager
Company E-mail for contact: dhivyashri@global-network.co.in
Company Website: www.global-network.co.in

Details of the job:
Educational Qualifications:
BE/B.Tech - Mechanical / Automobile with relevant experience of 5 to 6 years
Job Profile:
> Failure Analysis:
- Identify changes in components after usage and identify potential failure mode
- Analyse of failed components and conduct trials on failure modes simulation
- Document failures and present report with clear observation and findings
- Use CAE tools wherever required for simulation of failures
- Take corrective measures and check for failure modes and modify design with appropriate DFMEA
- Design release for production.
- Interface with Vendor Development and Quality team for components development
- Failure mode simulation trials, Failure analysis and corrective action
- Field quality issues analysis and resolution with corrective action.
Desired Profile:
> Knowledge of components and systems failures and their analysis
> Knowledge of DFMEA validation and corrective action for failures
> Knowledge of ANSYS for carrying out Analysis

Kindly send me your resume to dhivyashri@global-network.co.in

[saravananan.g]

SARAVANAN.G
No.4, Kumaran Flats,
Sri Dévi Guarden,
Vijaya Nagar1st street,
Valasaravakkam,
Chennai-600 087.
Mail : saravana.g143 AT g mail.com.
Mobile : 09791044010.
.
MOTO - I Can, I Will.
OBJECTIVE:

Become a successful Mechanical Engg. Seeking a responsible possible with an opportunity for
Professional challenge to apply skills and to support and enhance corporate objectives of the organization.

MAJOR SKILLS:

- Sincerity, Punctuality, Hardworking, Competitive and responsible.
- Enthusiastic and encourage others.
- Fierce determination and perseverance in achieving set targets.
- Has the capability to analyze problems deeply and think of effective solutions.

EDUCATIONAL QUALIFICATION:

DIPLOMA IN MECHANICAL ENGINEERING April 2006 1st Class with honors
Karpagam Polytechnic, Coimbatore. (Tamilnadu state)


Higher Secondary Certificate March 2003 83%
N.S.V.V.Boys.Hr.Sec.School
Dindigul. Tamilnadu.


Secondary Certificate March 2001 78%
N.S.V.V.Boys.Hr.Sec.School
Dindigul. Tamilnadu.

TECHNICAL SKILLS:

- OS : WINDOWS. 98, 2000, XP (ALL SERVICE PACKS).

ADDITIONAL QUALIFICATION:

- Hands on AutoCAD 2008
- MS Office(Word/Excel/PowerPoint )
- PRO-E WILDFIRE.3
- Computer hardware & Multimedia.

EXPERIENCE:

1. Company name : SAINT-GOBAIN GLASS IND LTD,
Sriperumpudur, Kanchipuram District.
Designation : Team member (Furnace controller, Tooling),
Period : From July2008 to Till now...

NATURE OF WORK:
- Develop moulds for glass bending of various curvature,
- Maintenance of tools based on the production plan,
- New prototype tool development and trial,
- To reduce internal rejections and improve quality,
- To prepare and issue tool development Plan based on the Marketing department plan,
- To maintain ‘5S’, ’3C’in the shop floor,
- Involved in KAIZEN and SUGGESTION activities.

TRAINING UNDERGONE:
- Attended STATISTICAL PROCESS CONTROL Training,
- Attended 7 QUALITY TOOLS Training prog,
- Attended QUALITY CIRCLE Training prog.

ACHIEVEMENTS:
- Power and cost are saved through modification of design,
- PRODUCT EXECUTION : To execute the product in time within the target Cycle time,
- Knowledge in control plan, process Flow, FMEA and Work Instructions, valuable
Engineering techniques.

2. Company name : ENDURANCE TECHNOLOGIES PVT LTD, - Chennai
Designation : Diploma Trainee (Quality control),
Period : From June 2007 to June 2008.

NATURE OF WORK:
- Involving line inspection activities,
- Inspecting final products,
- Preparation of Q.C report for final product,
- Inspecting quality incoming & preparing inspection Report,
- Japanese management systems-SMED, KAIZEN, 5S,
- Involving day today & ISO activities.


3. Company name : LAKSHMI MACHINE WORKS LTD, COIMBATORE-20

Designation : Technical Apprentice (Assembly),
Period : From June 2006 to June 2007.

NATURE OF WORK:
- New text Textile Machinery Manufacturing,
- Production, Planning & Control,
- Process planning knowledge of Assembly line,
- Press tools, Jigs and Fixture try outs,
- ISO 9001 activities.

GENERAL PROFILE:

Father’s Name : Gnanasekaran.p
Date of Birth : 06.05.1986
Gender : Male.
Nationality : Indian.
Marital Status : Single.
Languages Known : Tamil, English.
Permanent Address : 192/4Watertank Street,
Gandhi puram,
Pattiveeranpatti (po),
Dindigul.
DECLARATION:

I hereby declare that all the details furnished above are true to the best of my knowledge.

Date :
SIGNATURE
Place: (SARAVANAN.G).

[Guest]

Email :bharath23031987 AT gmail.com
Bharathraj M
```````````````````````````````````````````````````````````````````````````````````````````````````` ```
Objective
Effort vending under the criteria and to develop myself along with the requirement.
In a brief
- I wont bound my profile either to technical or non technical.
- Graduate Mechanical with the soft skill required.
- Technical ability in resolving the issues.
Work Experience
1) Technician (6 months)
Springs Somappa Company
Kormangala
2) Technician Apprenticeship (1 year)
TVS Motors Company.
Mysore plant.
Responsibilities
1) Technician trainee
- Inspection of the operating machine for work proceeding.
- Tool setting.
- CNC Machine operating.
Engineering Project
“ALUMINIUM HONEYCOMB PANEL”
This project is based on the following application
- Aircraft doors and hatches, floor panels.
- Railway floors, doors, interiors, fairing panels.
- Boat hulls and boats decoration.
- Racing car chassis and body panels.
Hobbies
- Playing outdoor games.
- Traveling.
Software Knowledge
Design Application : AutoCAD, Catia, Pro-E, Solid edge.
Programming : C programming.
Database : Ms Office (Word, PowerPoint, Excel).
Internet : Research, mailing, downloading.
Education
- BE in Mechanical from Vishveswariah institute of Technology (2011) (67.3%)
- Diploma in Mechanical from Board of Technical Education (2007) (57%).
- SSLC from Karnataka Secondary Education Examination Board (2004) (50%).