Resume CV : Piping designer/PDS Designer/Modeler

[graphith_ed@yahoo.co]

PROFESSIONAL SUMMARY :
NAME : Edvin Michel Pinto

PERSONAL DETAIL :
CURRENT POSITION : Piping Designer Gujarat- INDIA
DISCIPLINE : PIPING
Email : graphith_ed AT yahoo.com , graphithed AT gmail.com

Experience :
Around 18 years of experience in Design & Detail Engineering consultancy for Refinery, Hydrocarbon, Fertilizer, Petrichemical, Power plants and Down stream piping projects in India, Libya, Qatar & Kuwait.
Experience covers a wide range of projects for grass root refinery detail & engineering.

LIST OF FUNCTIONS :
- Piping Designer with Technip, Abu dhabi from 24th Augest onwards.
- Piping Designer with World's Largest Grass Route Refinery Reliance Industry Ltd, Refinery Div for Bechtel & Reliance joint venture for Jamnagar Export Refinery Project from July 2007 to 14th Aug 2008.
- Piping Designer with Flour Deniel Consultant BV ( May 2006 to June 2007)
- Piping Designer with L & T Chiyoda Ltd, Vadodara in India ( May 2004 to April 2005)
- Draughtsman Mech. (piping) with M/s. Consolidated Contractors Int’l Co., Qatar ( Juy 2002 to Apr 2003)
- Mechanical Draughtsman (Piping) with M/s. J & P (O) Ltd Libya North Africa (Dec 1999 to Dec 2001)

EDUCATION :
- Passed Secondry School Certificate Examee through S.S.C. Board, Pune (Maharashtra State) in 1983.
- Passed Higher Secondary School Certificate Examination through H.S.C Board Ghandhinagar - Ahmedabad (Gujarat State) in India Since 1994
- Passed ITI (Mech. Drafting & Estimating) 2 years TEB patern course in April 1989.

TRAINING :
- Microstation SE training taken at L&T Chiyoda Ltd, India
- PDS training taken at L&T Chiyoda Ltd, India
- AutoCAD training taken at Vijay CAD Acedemy, Vadodara, India

EMPLOYMENT HISTORY : (CURRENT ON TOP)
TECHNIP FRANCE, ABU DHABI, UAE from Mihira Consultants
Piping Designer : ( Augest ’2008 & onwards. )
- I worked from Augest 2008 & onwards in Technip ,Abu Dhabi as Piping Designer
- I worked their for feed job for integrated gas development project feed phase-Habshan-5 For
AbuDhabi Gas Industries Ltd and did MTO.

RELIANCE INDUSTRIES LTD, Refinery Div., Mumbai, India for Calibre Technical Services
Piping Designer : ( July ’2007 to AUGEST 2008. )
- I am working as Piping Designer for Jamanagr Export Reifnery Project for Reliance Industries Ltd’s join venture Becrel Engg Pvt Ltd
- I did here modeling for FCC Unit & RTF Unit.
- Also i did iso checking work in respect to p&id and vendor drgs extracting from models.

FLUOR DANIEL CONSULTANT B.V., KUWAIT :
Piping Designer-II : ( May ’2006 to 24th June 2007)
- Prepared technical drawrings for revamp Project of Chilled water system KNPC-Mina Abdullah refinery.
- Prepared technical drawings for Equate Modifications Shuaiba oil pier Berth 31/32 for KNPC-Shuaiba refinery
- Detail Engineering activities for Upstream/downstream pipeline project for KNPC & KOC
- Prepared technical drawings FEED Engineering activities for New Flare gas recovery Unit at MAA

L & T Chiyoda, Vadodara, India
Piping Designer : (from May 2004 to April 2006)
L & T Chiyoda is one of the prestigious firm who is active in hydorocarban detail and design engineering
My Job Responsibilities :
- I worked on Penex Area Unit for Oman Refinery project,
- I modeled here some nos of lines here for process & utilities services, pump piping, exchanger piping &
Vessel piping.
- I was working there on PDS Piping designer Module as per projects requirements.
- Also I made nos of Equipment layout study/option drgs for Oman Refinery Penex area & condensate Storage
Tankages area.
- Also I worked for Oman refinery’s GAD drgs on PDS Drawing Manager module.
- I Modeled for Delayed Coke Drum package project for As-built drgs. In this job I modified some lines as-built & made new routings as per construction & extract isometric drgs through models.

M/s. Consolidated Contractors Int’l Co., Doha, Qatar
Mech. Draughtsman :(Piping) (from July 2002 to April 2003)
- I have worked as a Draughtsman Mechanical with M/s Consolidated Contractors Int’l Co, (one of the leading International Contracting Co. who undertakes turnkey projects for Oil and Gas fields, Fertilizer Complexes, Power plants at Middle East, Africa Continental & Some part of Europe Continental) recently I worked for fertilizer plant for Qatar Fertilizer Co. Expansion 4 project at Mesaieed Industrial City in Qatar & for LNG Project train-3 (Liquefied Natural Gas) at Raps Alfa Industrial City in Qatar.
My Job Responsibilities :
- I have made Piping spooling dregs through piping Isometric Drgs for fabrication as issue for construction on their own software Tal Iso (it’s very advance software for piping spooling & isometric) also I did their isometric marked up drgs for construction, vendor drgs and made some test packs for hydro testing.

J & P (Overseas) Ltd, Tripoli, Libya
Mech. Draughtsman : (Piping) (fFrom Dec 1999 to Dec 2001)
- I have worked as a Mechanical Draughtsman with M/s J & P (O) Ltd., (one of the leading International Contractor who undertakes turnkey projects for Oil and Gas fields at Libya (North Africa)
My Job Responsibilities :
- I have made Piping Isometric Drgs from GAD’s, Piping General Arrangement Drgs through Piping P&ID’s, MTO/Bill of Material, Nozzle Orientation Drgs through Equipment Data-Sheet & some guidance of Engineer’s, Isometric Sketches through GAD For :
- Liquid Oil Recovery Plant
- Gas & Oil Separation Plant (GOSP)
- Installation of Oil & Water Storage Tank
- Water Injection Plants,
- Oil Pumping Station, Oil Terminal Facilities & related drgs.

Lark Engineering Services, Vadodara, India
Piping Draughtsman :(May 1994 to Dec 1999)
Lark Engineering Services is a reputed consulting firm, actively involved in detail engineering of :
- Oil Refinery Projects
- Power Plants
- Fertilizer Complexes.
- Petrochemical Industries etc.
- I was seconded by my employer to M/s Engineers India Ltd. R.O., Vadodara as a Piping Draughtsman for the period of 4.5 years approxly from 01.05.94 to 31.01.99. Where I have carried out the piping and mechanical drafting and designing work for :
Gujarat Refinery, DHDS Projects for AU-5 plant for Unit of
- Refinery Services processing facilities job.
- Amine recovery Unit job.
- Offsite piping job.
- Crude Distillery Unit Revamping job.
- Feed preparation Unit Revamp Gujarat
- Indian Petrochemical complex, Dahej, Gujarat, India.
- Gujarat Chemical Port Terminal Co. Ltd., Dahej, Gujarat, India.
- Kakinada Expansion Project for Nagarjuna Fertilizer Ltd, Andhra Pradesh, India.
- Arvind Mill Expansion Project for Arvind Mill Ltd, Ahmedabad, Gujarat, India.
- Wanakbori Thermal Power Project for Surat Electricity Board, Surat, Gujarat, India.
- Phulphur Expansion Project for IFFCO, Andrapradesh, India.
- Vijapur Expansion Project for IFFCO, India.
- Polymer Project for Zedex Industries Ltd, Vadodara, Gujarat, India.

Link Consulting Engineers, Vadodara (India)
Mech. Draughtsman : (Piping) (from April 1989 to April 1994)
My Job Responsibilities :
I have made Piping Isometric Drgs from GAD’s, Piping General Arrangement Drgs through Piping P&ID’s, MTO/Bill of Material, Nozzle Orientation Drgs study piping drgs, civil information drgs & isometric Sketches from piping General Arrangement drgs.

[Guest]

RESUME:
NAME : PATIL SUDHIR DADARAM
E-MAIL : sudhirpatil78 AT rediffmail.com

Objective :
Looking for an Executive level position to utilize my knowledge and technology experience along with my leadership, analysis, communications, and teamwork skills to enhance and design new product opportunities and solutions.

EDUCATIONAL :
QUALIFICATION :
- DIPLOMA IN K.J.SOMAIYA COLLEGE 57.33% (1997-2001) ELECTRICAL MUMBAI ENGINEERING.
- S.S.C. 59.14% (1992-93)
- I.T.I. (ELEC.) GOVT. I.T.I 79.14% (1993-97)
- N.C.T.V.T. B.S.E.S. LTD.MUMBAI AS A 69.14% (1997-1999) CABLE JOINTER

COMPUTER SKILL :-
- COMPUTER- MS-CIT COURSE PASSED (82%) & PRACTICAL KNOWLEDGE OF COMPUTER APPLICATION E.G. WINDOW-98, MS-WORD, EXCEL, INTERNET
- AUTO-CAD 2004,2008
- MICROSTATION,
- TRACECALC PRO, I-SKETCH, I-CONFIGURE, TSI, I-RUN ETC.

Tyco Thermal Controls
Designation : Designer
From : November 2004 till date
A division of Tyco, Tyco Thermal Controls stands as the world leader in heat-tracing solutions for the industrial, commercial, and residential markets. Tyco Thermal Controls brings together the knowledge, expertise, products and services of the five leading brands in industrial heat-tracing : Raychem, Isopad, Pyrotenax, DigiTrace and Tracer. They are also involved in specialty heaters and floor heating to wiring, temperature measurement, and leak detection.

WORKED ON PROJECT :
- Bechtel,
- Voghera,
- Vopak,
- Akzonobel,
- Lurgi,
- Dow,
- JGC (Japan)
- chiyoda (Japan)
- Siirtec Nigi
- Kashagan Petrofac (powai, Mumbai)
- South Hulch, (Perm Refinery),
- Phantom-WP2.1, Enterprise Pioneer-WP 2.1, Dow Chemical Phantom-WP6.1,
- SHELL-WP6.1.
- WGI Qatar Gas-WP1.1

JOB INVOLVEMENT :-
- Power box, junction box and panel location show on over all plot plan
- Preparation of line list,
- Bill of Material (BOM),
- Preparation of Circuit Schedule
- Preparation of Single line Diagram (SLD)
- Preparation of Wiring Diagram
- Draw accurate Isometric’s from GAD with the help of AUTO-CAD software.
- Calculate total pipe length, supports and valves of each pipe.
- Preparation Co-ordinates list for Power Box & RTD (East, North & Elevation)
- Calculating heat loss, tracers and its type used, adders’ length, electrical parameter like operating Amps, Voltages and Load for preparing Single line diagram by using Tracecalc Pro (In-house Software).
- Generate isometric drawings from the IDF (Intermediate data files) or PCF files (Piping component files) send by customer, with the help of line list (Spread Sheet) in TSI (Tyco System Identifier). TSI helps in grouping the lines with respect to maintain temperature, operating and exposure temperature.
- Designing Heat Tracing Systems that helps to maintain or raise the fluid /material temperature in the Pipes, Instruments and Vessels based on the specification and requirement for the specific project given by customer.
- Worked In Pragati Electricals (P) Ltd. New Mumbai Manufacturing Instrument Transformer As A
“Testing Engineer” For (2003-04)
Testing Of Transformer as Per IS, IEC & ANSI Standards.

Worked In Caprihance India Ltd. Thane As A “Trainee Engineer”:(Maintenance Dept.) For One Year (2002-2003)
Preparation of Preventive Maintenance Schedule,
Maintenance Of Dc & Ac Drives & There Controlling Systems,
Boiler Furnace Oil Control By Maintain Temperature Due To Leakage Of Steam, Maintenance Of Substation,

Worked In B.S.E.S. Ltd. Mumbai As A “Cable Jointer” For 2 ½ Years:(1997-99)
Joint Various Type Of LV Cables For Example Street Line Cable,
Service Line Cables.
Fitting Distribution Boxes For Service Line ( Pillar),
Complete Maintenance Of Street Line,
Maintenance Of Substation, Receiving Statio

HIGHLIGHTS:
- Worked in “Japan” for Chiyoda project duration 3 Months.
- Worked in “Netherlands-Amsterdam” for Kashagan project duration 6 Months.