L&T Valdel Bangalore : Piping Designer, Piping checker

[Admin]

L&T VALDEL-BANGALORE
The company is looking for around 2-3 Piping Senior Designers who have worked in Oil & Gas Sector with around 8+ years of experience. The candidate should have completed his diploma and should have hands on experience in AutoCAD and should be able to check Piping Drawings and guide draftsmen under him:

Those with Relevant Qualifications and Experience, Kindly send the resume at:
SUVIDHA.DELHI@GMAIL.COM
PHONE/MOBILE: 011-28032714, 9891552896
Quote the Job code: L&TVLDEL/2008/BANGALORE while sending the resume

[Guest]

Dear Sir,
This is reference with your advertisement in job portal
i would apply to the mentioned post.
Below listed are summary of my professional experience.
hope that this will meet your Requirement.
Looking forward for your response

Chemical Engineer with 4 years of overall experience in the field of:
- Piping/Mechanical activities to Gas Plant Project with 2 years in Abroad.
- Piping design and Detail Engineering with 1 year in India.
- Product manufacturing with 1 year in India.
- Proficient in PDS, CAESAR, AutoCAD,PDMS,Smart Plan 3D Modelling

Regards
Ashraf
ashraf_sha03 AT rediffmail.com
+966566179445

[Guest]

Dear Sir,
This is reference with your advertisement in job portal
I would apply for your organisation.
Below listed are summary of my professional experience.
hope that this will meet your Requirement.
Looking forward for your response

Mechanical Engineer with 4.6years of overall experience in the field of:
- Piping/Mechanical activities to Gas Plant Project with 3.5 years in Abroad working with JGC,PETROFAC,NIKKI-Japan.
- Pipeline inspection job in IVRCL I &P LTD1 year in India.
- Proficient in AutoCAD,PDMS,Spoolgenv5,Isogen,I-Tool,I-Sketch

Wth Regards
Tejeswara Panda
Spooling Engr & revision controller.
tejeswar.panda AT petrofac.com
+971559457951.

[Guest]

Dear Sir ,
I am apply above post
Kumar Saailendra

[Guest]

RESUME
Manjula.R
manjula.156r AT gmail.com

Career Objective :
Wish to work in atmospheres which offer a friendly go ahead with professional enthusiasm where I can achieve my goal of being valuable accent to my making use of available resources to their best.
Educational Qualification :
Qualification Institute Year of Passing "%" Percentage
S.S.L.C in St Paul’s High School (2006-2007) 84%
Diploma in
Civil Engineering in S.J.(Govt). Polytechnic (2009-2010) 76%
Strengths :
- Innovative in thought process.
- Initiative and willingness to take decision when dealing in emergencies and meeting deadlines
- Ability to motivate and enhance the performance of the team.
Experience :
- 6months experience in Karnataka State Police Housing Corporation, Bangalore.
- 2months of training for auto cad 2D&3D at RVE Technologies, Bangalore.
Hobbies :
- Drawing,Painting,Playing Carrom, Listening Music, Reading Books etc.,

Strengths : Adaptability, Dedication, Swift Learning
Ability,Quick Learner and a Team Player
Computer Skills
- Computer Basic
- Auto Cad
- Staad Pro
I hereby declare that the above written particulars are best of my knowledge and belief.
Date : 26/11/2010
Place : Bangalore (Manjula.R)

[umesha t]

CURRICULUM VITAE


UMESHA .T
umesh115 AT gmail.com

CAREER OBJECTIVE :
Looking for a challenging assignment in piping design and engineering where I can explore and prove my potential and get the best out of me for the organization working for.

ACADEMIC QUALIFICATION :

- B.E. (Mechanical Engineering) in N.I.E Mysore from Vishweshwaraiah Technological University (June 2010) – 62% in final yr.
- PUC from Nalanda P.U college Jagalur (March 2005) -63%
- SSLC from Sri Maruthi Rural High School, Anabur (April 2003) - 69.76%

PROFFESSIONAL TRAINING

- Completed a course on Piping Design Engineering from V4 Engineering Solutions Pvt. Ltd Bangalore.

PROJECTS UNDERTAKEN :

ACADEMIC PROJECT :
- Project on Fabrication and Performance analysis on Micro-Hydro Turbine in Hydraulics Lab in NIE, Mysore (B.E final year Project).

PROFESSIONAL EXPERINCE :
8 Months Experience As Piping Design & Stress Analysis.
Presently working as a Design Engineer in V4 ENGINEERING SOLUTIONS PVT LIMITED, Bangalore, from JULY 18 2010 to till date









PROJECT DURING PROFESSIONAL TRAINING :
- ONSHORE UPSTREAM PROJECT WITH 8 WELLHEAD’S

- Preparation of Line list, Equipment list by using P&ID.
- Preparation of Specialty items list by using P&ID.
- Preparation of Preliminary valve MTO.
- Understanding of Plot plan, Equipment layout and Piping layouts.
- Understanding of Piping GAD’s etc
- Preparation and checking of Isometrics.

TECHNICAL SKILLS :

- Preparation of Line list, Equipment list, Specialty items list by using P&ID.
- Preparation of Plot Plan, Piping GAD’s etc.
- Conversant with international codes & standards like ASME B31.1, ASME B31.3.
- Preparation of Preliminary valve MTO, Final MTO.
- Knowledge of valve data sheet.
- Knowledge of Piping thickness calculation, Reinforcement pad thickness calculation.
- Knowledge of designing of Pipe Racks, Expansion loops.
- Conceptual knowledge of Plot plan, Equipment layout and Piping layouts.
- Conceptual knowledge of piping materials, selection of materials for construction.
- Knowledge of Support modeling as per client standards.
- Knowledge of supports, critical line selection.
- Knowledge of Pipe span & Nozzle displacement calculations.
- Back end calculation of stress analysis & load case preparations.

TOOL SKILL :
- Knowledge of CAESAR-II(VERSION 5.1)
- Knowledge of AutoCAD 2008/10.
- Knowledge of SOLID EDGE.
- Knowledge of SOLID WORKS.

COMPUTER SKILLS :
- Knowledge of MS-Excel, MS-Words.

PERSONAL STRENGTHS
- Quick learning of new concepts.
- Self motivated.
- Goal oriented.
- Good in team work
- Ready to take challenges in my life.

INTEREST & ACTIVITIES
- Music.
- Playing cricket, Carom

[KANAKA RATNAM.T]

Being Mechanical Engineer, About 5.1 years of experience in the field of Piping Design /Drafting. Involved in various projects of shipping. Design , Drafting & checking experience that includes training, detailed pipe design, pipe supports , 3D modeling, fabrication drawings, material take off, Preparation isometric Drawings & 3d modeling for Shipping Piping using FORAN, MTO for Piping, Solving site problems. Co-coordinating with different departments (Q.C, Production), Preparation of Production documents, Checking of schematic drawings & preparation of layout drawings, Checking of Vendor Documents, Aware of various Rules and Regulations of Classification Societies like DNV, ABS, Lloyds, NKK, IRS Etc, Aware and worked with various piping standards like DIN,JIS,ASTM,ASME.

[Guest]

good morning and have a nice day

[Guest]

Resume`
Jagriti Shekhar
Email :- jagritishekhar AT gmail.com

________________________________________
Objective :-
To be in a challenging and learning environment and to be a part of the development going in my organization, by continuously giving the best out of my work
Qualification :-
Course College/University
/School Subject Marks
obtained Year of
passing
B.Tech MPCT EE 67.03% 2011
12th Baldwin Academy CBSE
54%
2007
10th ST. Karens’ School ICSE

68%
2005
Project Details :-
- Dark Detector :- Mini Project
Description :-. This project works in case light goes off inside the room at night and the buzzer sound is produced.
- SPEEDOMETER CUM ODOMETER :- Major Project
Description :-. A final year major project helps in controlling speeds of motor, cars, buses etc. at some rated speed so that accidents or major faults may be avoided.
Industrial Training :-
- Training for 15 days “Bharat Sanchar Nigam Limited” at Buddha Marg, Patna(Bihar)
- Training for 30 days ”Raj Ratan Global Wire Limited” on drive controlled machine with PLC control at Indore(M.P.)
Skill Training :-
- Successfully Completed Six Month Training on “PLC Programmer” course (Includes PLC Hardware Introduction, PLC Architecture, Siemens, Modicon & GE Fanuc PLC, SCADA Features & Application)
Skills :-
Programming Skills C, C++
Operating System Windows XP, VISTA, 7
Software Skills MS Office, Adobe Photoshop
Area of Interest :-
- Network System
- Programmable Logic Control
Achievements :-
- Got Certified In MATLAB Processing Course.
Extra Curricular/Co-Curricular Activities :-
- Participated in college level games and sports.
- Active Participation in various programs held in college.(e.g.- Debate, Extempore )
Hobbies :-
- Listening Music
- Watching Movies

[Guest]

ANUJ KUMAR SRIVASTAVA
Educational qualification in detail :

Qualification (Board/University) Year % of Marks
S.S.C (Bihar Board, Patna) 1985 68
H.S.C Intermediate(Inter Council Patna) 1987 57
B.A.(HONS.) 1990 54


Skill attained through experience :
- Site management and cost control.
- Execution of unit, offside and cross country piping.
- Resource planning and utilization.
- Material planning and control.
- Coordination with client and other agency involved in execution of the project.
Experience :
A. Project : HPCL,MAHUL Refinery project.
Company :Larsen & Tourbo Limited
Period : October 2008 till date.

B. Company : - Bridge & Roof.
Period : - January 02, 2006 to September 2008.
Project detail and work description Responsibility Client
PRIME G+ Equipment Erection and piping. - Piping - Area supervisor in charge.
- Micro planning .
- Man-power management.
- Work-allocation to the team.
- Quality and Safety.
- Achieving daily and weekly target.
- To record and execute field changes.
- Construction, Mechanical Completion and pre-commissioning supervision HPCL, Mahul.

C. Company : - Larsen & Toubro Limited.
Period : - September 23, 2003 to December 26, 2005.
Project & work-description Responsibility Client
1. Hydro Cracker Unit - Piping. Area Senior supervision
- Spool management
- Project material control for the work under my responsibility.
- Insulation works supervision
- Sand and blasting supervision BPCL – Mahul
2. Sulphur Block and Associated Facilities Project

D. Company :- Onshore Construction Co. Pvt. Ltd.
Period :- August 01, 1997 to September 20, 2003.
My work involved as a Supervisor with Onshore Construction Co. Pvt. Ltd in various project sites.
Project & work-description Responsibility Client
1. Liquid Ammonia handling and transfer line Phosphoric Acid - Micro planning on day to day basis
- Construction man power management.
- Quality of work executed
- Construction, mechanical completion and pre-commissioning supervision.
- Piping area supervision
- Achieving progress planned for my team
- Work- allocation to teams, dedicated to my area.
- Complying with the field changes and recording them.
GFCL, Kakinada

2. Installation of new Nitric Acid plant (90 MT Absorption Tower) , And revamping of NH3 plant, replacing NH3 Reactor and column,
3. Replacing convection and Radiant section of Reformer and Air preheater, supply, Installation, Calibration of 10,000 MT Phosphoric Acid Storage tank and its handling facility. DEEPAK FERTILIAER TALOZA-MUMBAI

4. Installation of Crude storage Tank, TGS plant and Fire sprinkler system – RAWA Terminals. AS ABOVE. CAIRN- ENERGY Rajamundary
5. Mechanical Installation of entire SDU and HDU plant, its U/G Line and 2 no of gas fired heater for Refinery Expansion Project. IOCL,Digboi,

6. Spool fabrication if pipeline of all class and specification from various units. RPL, Jamnagar
7. Metamora plant with its utility system. GHARDA, Chipiun.

8. Installation of Nitric Acid Plant RCF,Mumbai
- Coordination with client and other agency involved in execution of the project.
Experience :
A. Project : HPCL,MAHUL Refinery project.
Company :Larsen & Tourbo Limited
Period : October 2008 till date.

B. Company : - Bridge & Roof.
Period : - January 02, 2006 to September 2008.
Project detail and work description Responsibility Client
PRIME G+ Equipment Erection and piping. - Piping - Area supervisor in charge.
- Micro planning .
- Man-power management.
- Work-allocation to the team.
- Quality and Safety.
- Achieving daily and weekly target.
- To record and execute field changes.
- Construction, Mechanical Completion and pre-commissioning supervision HPCL, Mahul.

C. Company : - Larsen & Toubro Limited.
Period : - September 23, 2003 to December 26, 2005.
Project & work-description Responsibility Client
1. Hydro Cracker Unit - Piping. Area Senior supervision
- Spool management
- Project material control for the work under my responsibility.
- Insulation works supervision
- Sand and blasting supervision BPCL – Mahul
2. Sulphur Block and Associated Facilities Project


D. Company :- Onshore Construction Co. Pvt. Ltd.
Period :- August 01, 1997 to September 20, 2003.
My work involved as a Supervisor with Onshore Construction Co. Pvt. Ltd in various project sites.
Project & work-description Responsibility Client
1. Liquid Ammonia handling and transfer line Phosphoric Acid - Micro planning on day to day basis
- Construction man power management.
- Quality of work executed
- Construction, mechanical completion and pre-commissioning supervision.
- Piping area supervision
- Achieving progress planned for my team
- Work- allocation to teams, dedicated to my area.
- Complying with the field changes and recording them.
GFCL, Kakinada

2. Installation of new Nitric Acid plant (90 MT Absorption Tower) , And revamping of NH3 plant, replacing NH3 Reactor and column,
3. Replacing convection and Radiant section of Reformer and Air preheater, supply, Installation, Calibration of 10,000 MT Phosphoric Acid Storage tank and its handling facility. DEEPAK FERTILIAER TALOZA-MUMBAI

4. Installation of Crude storage Tank, TGS plant and Fire sprinkler system – RAWA Terminals. AS ABOVE. CAIRN- ENERGY Rajamundary
5. Mechanical Installation of entire SDU and HDU plant, its U/G Line and 2 no of gas fired heater for Refinery Expansion Project. IOCL,Digboi,

6. Spool fabrication if pipeline of all class and specification from various units. RPL, Jamnagar
7. Metamora plant with its utility system. GHARDA, Chipiun.

8. Installation of Nitric Acid Plant RCF,Mumbai


Technical qualification in detail :-
Diploma in computer application (Windows 98, MS Office &its application like MS Word, MS
Excel etc.)