www.jaivel.com Synergies Pvt Ltd Rajkot : CAD, Solidworks, CATIA Design Engineer

[Admin]

Jaivel Synergies Pvt Ltd Rajkot : CAD, Solidworks, CATIA Design Engineer
Website : http://www.jaivel.com

Jaivel Careers :
Rajkot, India

About us :
The founder of the Jaivel group of companies - Vipul Vachhani, is an extremely ethical and respected individual who, during his career has worked in the aerospace industry in India, USA and the UK. His passion for engineering led him to start his own business, providing engineering solutions to the aerospace sector, his dedication and passion are shared by all employees and proves to be a key factor in the company’s ongoing success.

Senior CAD Engineer (2 Positions) :

Location :
Engineering Services Design Centre, Rajkot, India.

Job Description :
Your prime responsibility will be to understand CAD projects based on individual customers’ requirements. You will either execute the projects alone or will be assisted by the CAD Engineering Team for execution of projects.

You are expected to, communicate, Co-ordinate and execute each project in the required time frame. You will primarily be based in RAJKOT at our Engineering Services Design Centre.

Qualifications/Experience :
* Bachelor or Master Degree in Mechanical / Aerospace Engineering

Technical Skills Requirement :
* Minimum of 3 years experience in CAD Design & Development Work.
* Reading and interpretation of engineering drawings.
* Knowledge of Engineering Standards, Material and Heat Treatment processes.
* Hands on Experience in Conceptual design, Jigs & Fixture Design, Complex part modeling, Assy and Drafting.
* Candidates having experience in Solidworks / CATIA / UG will get preference.

Contact :
Please forward your resume to us at careers@jaivel.com,
we will be in contact with suitable candidates at our earliest convenience.

If there are no current opportunities advertised in this section but you feel you have suitable skills, knowledge, aptitude and aspirations to work for Jaivel and would like to be considered for future vacancies please forward your CV with a covering letter to careers@jaivel.com

[Guest-IJT]

15/7 L, Karunambigai Colony
Velachery, Chennai-600 042. Mobile: +91-9710 222334
E-mail: periyasamy_tk AT yahoo.com

Periyasamy.T 6+ years Experience in Piping & MECHANICAL
Objective A position in your esteemed concern providing me the opportunity to make a strong contribution to organizational goals through development of professional skills in the piping field.
Skills - Professional Experience in CAD & Piping
- Having profound experience of 6 + Years of Total , out of which
6 Years in Piping Arena
Academic
Qualification - Diploma in Mechanical Engineering DOTE, Tamilnadu
- First-class with Distinction (82%), Passed out in 2004.
- Pass out from: Maruthi Polytechnic college, Attur, Salem.
Software Skills
Piping
- AutoCAD 2007
- Microstation V 8
Professional Experience
May 2004 _Till Date M/s. BGR system (INDIA) Ltd. Chennai
Piping designer
Area of Expertise :
- Preparation of Piping Layout
- Preparation of Pipe Support Drawings
- Preparation and checking of Isometrics Drawings
- Generate the Piping G.A.D.
- Bill of materials.
Project handled:
- M/s CASING GAS RECOVERY UNIT.
o Preparation of Piping Layout
o Preparation of Pipe Support Drawings
o Preparation and checking of Isometrics Drawings
o Generate the Piping G.A.D.
o Bill of materials.

- M/s Mangalam cement Ltd. Rajasthan
o Preparation of Piping Layout
o Preparation of Pipe Support Drawings
o Preparation and checking of Isometrics Drawings
o Piping Bill of materials.

- M/s 92.2 MW TNEB-CCPP valuthur phase II
o Preparation of Piping Layout
o Preparation of Pipe Support Drawings
o Preparation and checking of Isometrics Drawings
o Generate the Piping G.A.D.
o Bill of materials.

- BUTANE SUPERHEATER FOR N-BUTANE PLANT.
o Preparation of Piping Layout
o Preparation of Pipe Support Drawings
o Preparation and checking of Isometrics Drawings
o Generate the Piping G.A.D.
o Bill of materials.

Professional Experience
- M/s REFORMER FEED UNIT.
o Preparation of Piping Layout
o Preparation of Pipe Support Drawings
o Preparation and checking of Isometrics Drawings
o Generate the Piping G.A.D.
o Piping Bill of materials.

- M/s NORTHERN AREA FIELD DEVELOPMENT PROJECT. (OFF-SHORE)
o Preparation of Piping Layout
o Preparation of Pipe Support Drawings
o Preparation and checking of Isometrics Drawings
o Piping Bill of materials.
- M/s CAIRN ENERGY INDIA PVT LTD- GUJARAT & RAJASTHAN.
- M/s LAKSHMI FIELD DEVELOPMENT PROJECT. (OFF-SHORE)
o Preparation of Pipe Support Drawings
o Preparation and checking of Isometrics Drawings
o Piping Bill of materials.

- M/S ONGC-MUMBAI.
o Preparation of Piping Layout
o Preparation of Pipe Support Drawings
o Preparation and checking of Isometrics Drawings
o Piping Bill of materials.
Personal Details
Name given in Passport : Periyasamy Thangarasu
Date of Birth : 30-07-1984
Marital Status : Single
Permanent Address : Sathasivapuram (p.o),
Vadachennimalai via,
Attur (T.K),
Salem (D.T), Tamilnadu -636 121
Phone: 04282-235073
Blood Group : B+
Passport No : G 0653681
Passport issued date : 31-10-2006
Passport valid date : 30-10-2016
Passport issued from : Chennai
Area of Interest - PDS Modeler.
- Equipment designer

Declaration:
I here by declare that above written particulars are true to the best of my knowledge & belief.

(T.Periyasamy)

[Guest]

CHANDRAKANT SIHANI
csihani AT gmail.com
________________________________________
Career Objective
“To be associated with a firm, this provides career development opportunities and contributes in its progress through my knowledge and skill.”
Educational Qualification (MECHANICAL ENGINEERING)
CLASS/SEMESTER University/Board Year S.P.I/Percentage College/School
8TH sem. C.S.V.T.U. 2010 7.77 RUNGTA COLL.OF ENGG.& TECHNOLOGY
7TH sem. C.S.V.T.U. 2009 7.45 RUNGTA COLL.OF ENGG.& TECHNOLOGY
6TH sem. C.S.V.T.U. 2009 7.29 RUNGTA COLL.OF ENGG.& TECHNOLOGY
5TH sem. C.S.V.T.U. 2008 7.10 RUNGTA COLL.OF ENGG.& TECHNOLOGY
4TH sem. C.S.V.T.U. 2008 6.91 RUNGTA COLL.OF ENGG.& TECHNOLOGY
3RD sem. C.S.V.T.U. 2007 6.91 RUNGTA COLL.OF ENGG.& TECHNOLOGY
2ND sem. C.S.V.T.U. 2007 6.71 RUNGTA COLL.OF ENGG.& TECHNOLOGY
1ST sem. C.S.V.T.U. 2006 6.56 RUNGTA COLL.OF ENGG.& TECHNOLOGY
12TH C.G.B.S.E. 2006 60% SHARSWATI HIGHER SECONDARY SCHOOL
, korba(west) (C.G).
10TH C.G.B.S.E. 2004 65% SHARSWATI HIGHER SECONDARY SCHOOL
, korba(west) (C.G).
Computer Skills
1 Diploma In CAD/CAM
2 Knowledge of CATIA P3V5R16 with 2D & 3D Modeling
3 Knowledge of PRO-E (wild fire 3.0 , 4.0) with 2D & 3D Modeling.
4 Basic Knowledge of editions of windows 2000/XP/7 & MS Office.
5 AUTOCAD 2006 , 2010
Industrial Training
Organization : C.S.P.G.C.L KORBA (WEST) as trainee engineer.
Training Duration : 28 days
Organization : SIMPLEX CASTING L.T.D , BHILAI
Training Duration : 45 days

Project

“ PROCESS CAPABILITY ANALYSIS AND INDICES OF MANUFACTURING PROCESS”

[Guest]

Amrutiya hiren .k.
Hobbies : Search new knowledge.

Certificates
- Auto 2D-3D.
- Master cam
- Solid Works
- .VMC/CNC programming
- MS Word, MS excel.
- Internet
- “indo German tool room” (Ahmadabad)
Certificate in CNC Machinist (CCM)
Top Skills

Modeling, Drafting, Technical, Inspection, Development, Increase production

Fields of Interest
Design & Drawing
Programming
Development
Production & manufacturing
Experience
1 Designing in AutoCAD (1 Year)
- Perfect wire cut (Rajkot)
2 Designing and developing in Solid works (2 Year)
- Vishal Industries (Rajkot)
Additional Info
Objective : Intend to build a career with leading corporate of hi-tech environment with dedicated People, which will
Help me to explore myself fully and realize my potential. Willing to work as a key player in challenging &
Creative environment.

Amrutia Hiren .k.