Formglas inc Malaysia, Singapore : CNC Machine Programmer, AutoCAD Design Engineer

[Admin]

Formglas inc Malaysia, Singpore : CNC Machine Programmers, AutoCAD Design Engineers
Website : http://www.formglas.com

Formglas is ready to serve you anywhere in the world.
Formglas products are used throughout North America, South America, Europe, the Middle East, and Asia. Three strategically located manufacturing locations in the United States (Pittsburgh), Canada (Toronto) and Mexico (Mexicali) are backed by 300+ design engineering, field support, customer service and production professionals and more than 50 local product representatives around the globe.

A career at Formglas means being part of an organization that continually pursues ways to improve, grow and innovate. We believe in hard work, a passion for what we do, and intellectual curiosity. We embrace individuals who want to develop their skills and rise in our organization as it extends its reach globally.

Talented professionals with the following backgrounds are always welcome to apply:

Design Engineers
AutoCAD 2008, drafting/interior and exterior architectural detailing experience for commercial construction. BIM and LEED knowledge desirable.

Estimators/Technical Sales Support
Architectural background in commercial construction, customer presentations, technical solutions development and estimating.

CNC Machine Programmers and 3D Modellers
CATIA V5 or Mastercam X2/X3 experience, 3-axis and 5-axis machining experience.
If you're ready to raise the bar, challenge convention and exceed your goals, we encourage you to submit your resumé to careers@formglas.com.

Contact us :
* MALAYSIA
o FG (SEA) SDN. BHD. TSI HOLDINGS SDN BHD
o Eleana Tham
o T: + 603.2026.6066
o F: + 603.2078.3450

* SINGAPORE
o FRAMEWORK BLDG PROD. PTE LTD
o C.K. Chew
o T: + 656.861.5838
o F: + 656.861.3387

[Guest]

CURRICULUM VITAE
Name : V.MANIVANNAN
Mail : maniv_career AT yahoo.in
Mobile : +91 9791353012.
CAREER OBJECTIVE
To secure a position in a professional organization that would utilize my skills and provide an opportunity for career advancement.
PROFESSIONAL PROFILE

- Having 3 years 5 months of Designing experience in Hydraulics and Hydraulics machines
- Expertise in AutoCAD, Pro/Engineer, Solid Works
- Engineering Design and Analysis, Production Planning and controls
- Thermodynamics & thermodynamics system
- Technical functional skills in Pro-E 2001 in solid modeling, surface modeling, assembly modeller
- Knowledge of mechanisms and familiar with working models in Pro-E 2001
- Assisting Graduates to do Projects in Project planning
TECHNICAL SKILLS
- Working knowledge of Auto-cad (any version), Pro-E (2001, wf-2, wf-3, wf-4).
- Drafting : AUTOCAD,SOLID WORKS
- Designing : Auto cad, Pro-E, Solid works
- Project Planning : MS Project
- Operating system : windows 98, 2000, XP.
- Good knowledge of MS-office ( Ms-Excel, Ms-Word, Ms-Access, Ms-PowerPoint)

EDUCATION QUALIFICATION :
- Diploma in Mechanical Engineering Muruga Polytechnic, Kallakurichi, TN, (Apr-2007)
- H.S.C - Govt High Sec School Thiyagadurugam, TN, (Apr-2005)
- S.S.L.C - Govt High School, Ohaiyur, TN, (Apr-2003)
CERTIFICATION

- AutoCAD
Completed training in CADD Centre Tamil Nadu, India.
- PRO-ENGINEERING (Wild fire-4 )
Completed training in CADD Centre Tamil Nadu, India.
- SOLID WORKS (2009)
Completed CADD Centre Tamil Nadu, India.

WORKING EXPERIENCE
Work-study Hydraulics Pvt Ltd, Chennai as a Design Engineer (using in autocad2010 and solid works) from April 2007 to till date.
Company Profile
- Designing of Hydraulics and Hydraulics Machines, Hydraulic special purpose machine and hydraulic power pack and Hydraulic cylinder, for various global customers.
Clients
- Brakes India ltd
- Sundaram Clayton ltd
- Sundaram fasteners ltd
- Ashok Leyland
- Wheels India ltd
- Hyundai motors (India) ltd
- Lucas- TVs ltd.
Responsibility
- Planning and designing for Hydraulic Scissor lift With Power pack.
- Planning and Designing for Assembly Press in Water pump & Oil pump.
- Planning and Designing for Wet type Porosity Leak Test in Water pump & oil Pump.
- Planning and Designing for Dry type Leak Test rig with Torque Checking.
- Planning and Designing for Dynamic leak test with Torque Checking along with face out checking.
- Creation of working models of steam stop valve, Feed check valve, using Auto cad, Pro E using Solid Modeling, Assembly modeller, Mechanisms
- Designing, Assembling and Detailing of Steam stop valve using AutoCAD, Por-e using Solid modeller, assembly modeller, and drawing
- Composing Production Layout Drawings.
- Drafting for Hydraulic Valves, hydraulic Pumps, and Hydraulic Motors Drawings.
- Preparing Hydraulic press, Hydraulic cylinder, Leak testing machines, scissor lift, manufacture drawings and assembling drawings.
PERSONAL DATA :
Name : V.Manivannan
Address for Communication : Sathnur, Ohaiyur Post
Kallakurichi Taluk, Villupuram District
Pin Code - 606 204, Tamil Nadu, India
Father’s name : Mr.K.Viswvanathan
Sex : Male
Date of birth : 25-07-1988
Martial status : Single
Nationality : Indian
Contact Details : Cell - +91 9791353012
Pass Port No : G 6921838.
Languages known :
Personal interests/ Hobby : Listening to music, playing badminton.
Email : manivnnn87 AT gmail.com
DECLARATION :

I consider myself familiar with Mechanical Engineering Aspects. I am also confident of my ability to work in a team.

I hereby declare that the information furnished above are true to the best of my knowledge.

Yours sincerely,
V.Manivannan

[Guest]

Respected Sir,
I am S.Mohammed Sait have completed Diploma in
Mechanical in the year 2008 from MAVMM Polytechnic College , Madurai.
I have done Autocadd, Pro-e course so im very much interested in
working that field I am currently working in autocadd field
fabrication design engineer.
I am presently looking for an opening in your
concern for autocadd, Pro-e wild fire2.Hence I am sending my Resume
for your kind perusal.Kindly
consider the same.

With Regards CONTACT CELL NO;

[Guest]

B.G.MURALIDHAR
PRESENT OCCUPATION :- BHILAI ENGINEERING CORPORATION ;Ltd;BHILAI ;INDIA
PRESENT POSITION :- G.M (Engg& Hydraulics)
EDUCATIONAL QUALIFICATION :- B.E (MECH );M.Tech (Design Of Mechanical Equipment)
EXPERIENCE :- Has Worked In Engg.Department Of ISGEC ;India;Form 1978-90
Experienced In Design Of Mechanical Presses; Hydraulic Presses;SPM’s
1990-94 ; SBEC Systems Pvt Ltd; Installation of Hydraulic Motors On Sugar MillDrives;
Automation ; Co-Gen Etc
94-2004 ;- Consulatant to Bhilai Engg Corporation Ltd ;Developing Hydraulic Side Discharge Loaders
For Under Ground Mines; Have Developed Mobile Hydraulic Alumina Chargers For M/S
STERLITE; It is all about Closed Loop Hydraulics.
2004-2009 Went back To ISGEC ; Worked as VP ; In Standard Press Design Dept. Job included
Standardization ;Optimization Of Deign ;Cost Reduction etc.
Professional Knowledge :- Auto Cad ; Design Drawing ; Industrial Hydraulics ;Design to-
Assembly & Commissioning at Clients Work.Involved in Lot of Automated Design Projects.

[saravananramasamy]

RM. SARAVANAN,
Email : saravananramasamy15 AT gmail.com
____________________________________________________________________________________________
CAREER OBJECTIVES
To maintain absolute integrity over all works assigned to me and to work sincerely and strive hard to fulfill all my duties towards the requirements of the organization as a technical list and as a human being.
GENERAL EDUCATION
- BE in Mechanical Engineering in 2010 from Alagappa engineering College, karaikudi.
- Diploma in mechanical engineering in 2004 from Annamalai polytechnic college chettinad.
ADDITIONAL SKILLS
Soft spoken, active by physique and devoted towards work assigned.
SOFTWARE TECHNOLOGY
Extensive knowledge in the software technology
- Auto CAD 2009
- Solid works 2009
- MS office
TECHNICAL EXPERIENCE
Production technician, THE INDIAN ELECTRICAL SERVICE AND LATHE works 2003-2004
Experienced lathe machine Support Equipment Technician with expertise in the lathe work industry. Proven ability to perform maintenance with accuracy and speed. Key strengths include :
- Maintenance Operations - Regulatory Compliance
- Staff Training - Supplier Relationships
- Program Coordination - Inventory Control
- Hazardous Materials Awareness - Team Building

Proven ability to troubleshoot and maintain overall equipment readiness. Expert knowledge of parts management and interpretation of system schematics. Take pride in quality workmanship.
- Maintenance supervisor, KANI IRON WORKS PVT. LTD. 2004-2005
- Experienced maintenance supervisor with lot of management experience in the pressing and fabrication industry.
- Exceptional organizational and communication skills.
- Motivation leader with ability to direct teams.
- Able to negotiate favorable labor contracts and schedule personnel to reduce downtime.
Drafts man and CAD operator, MERCURY FITTINGS PVT. LTD. 2010-till now
- Created assembly drawing, including bills of materials and detail drawing.
- Utilized AutoCAD 2009
- Solicited feedback from machine operators and builders to develop designs of the highest quality, cost effectiveness.
- Functioned as product and process information source to diverse customer base.
- Detail driven with good communication skills and proven success interfacing with both customers and co-workers.
FIELD OF INTEREST
- CAD & CAM
- DESIGN OF MACHINE ELEMENT
PROJECT WORKS

BE - Air quality monitoring in automobile vehicles.

DME - Attachment of coolant pump in power hacksaw machine

[Guest]

RESUME
--------

P.MUTHU KUMAR
(Diploma in mechanical engineering)
Email Id : muthukumarrk12 AT gmail.com
Objective :
Seeking a challenging job in the field that offers professional growth, while being resourceful, innovative and flexible.
Qualification :
Diploma in Mechanical Engineering at Ramu Seetha Polytechnic College, Madurai.
Working Experience :
- Working as a VMC machine programmer cum supervisor in SS CNC Works India Pvt Ltd., Coimbatore from 2ND JUNE 2006 to 28th FEB 2010.
Machine Name : Lead Well VMC.
Make : Tiwan
Machine type : vertical
Control : Fanuc
No of axes : 4
Total stations : 24
X axes travel : 1016mm
Y axes travel : 508mm
Z axes traval : 617mm
4 th axes chuck dia : 250mm
Total stations : 24
Spindle : 1
Spndile speed : Max 8000rpm
- Working as a VMC Machine Operator in SANMAR ENGINEERING CORPORATION, Viralimalai from 8th APRIL 2010 to 7th Oct 2011.
Method of Operation : Machining Centre
System : Fanuc
Machine Name : lmv 55 VMC
Machine type : Vertical
Control : Fanuc
No of axes : 3
X axes travel : 1016mm
Y axes travel : 508mm
Z axes traval : 617mm
Total stations : 40
Spindle : 1
Spndile speed : Max 4000rpm
- Knowledge About As Fifth Axis Machine And HMC Machine.
- Working as a HMC Machine Trainee in Control Component India Pvt Ltd, Sricity, Andhra Pradesh from 12th March 2012 to Till Date.
- Preparation of Production plan based on the availability of M/c, Material and Shift.
- Study and review the customer drawings and check the necessary requirement’s i.e. Tools, Jigs & Fixtures, Inserts , drill bits, taps, reamers & necessary dimensions.
- Monitor the all master instruments and gauges i.e. Vernier caliper, inside & outside micrometer, bore gauge, plug gauge, groove dial, slip gauge, and Radius gauge.
Product of concern:
Valve Components:
i.e Butterfly Valves and Knife edge gate Valves
Ball valves and all accessories
Nozzle , Valve Plug , Disc, Pump and all other related components
Automobile Components:
Earth Moving Equipments (JCB) components, Bearing housing, Bearing Drum, Hub, Gear, Carriers, Gear Housing, Rollers ,Yoke, Pump and all other related components .
Materials Used:
Carbon Steel, Alloy Steels, Stainless steels, Aluminum, Stellite (Hard)
Materials, Alloy 20, Brass and Bronze
Instruments Used:
- Vernier calipers (0 - 1000 mm )
- Outside micrometer ( 0 – 700 mm )
- Inside micrometer ( 0 – 600 mm )
- Depth micrometer ( 0 – 300 mm )
- Bore Gauges ( 0 – 500 mm )
- 2D Height Master ( 0 – 1000 mm ) (Electronica make)
- Beam Gauge ( 0 – 600 mm )
- Slip gauge , outside caliper, inside caliper.
Area of Interest:
VMC Programming, Development of new components, designing of Jigs & Fixtures and maintainance works.
Our customers:
- Tyco sanmar
- Xomax sanmar
- Sanmar foundries Machine Shop Division
- Larsen toubro
- Lakshmi machine works
- Orbinox india Pvt Ltd
- Flow serve india Ltd
- Anugraga valves
- Lg Balakrishnan & Brothers
Computer proficiency:
- Package – MS Office
- Excel

Declaration:
I here declare that the above-furnished details are true to the best of my belief and Knowledge.
Place : MANAPPARAI
Date : P.MUTHU KUMAR