www.suvidhajobs.net CATIA V4/V5, NASTRAN, PATRAN Bangalore : German MNC

[job.bot]

Dear Candidate

SUVIDHAJOBS is a High Profile HR Company specializing in corporate
Head Hunting in Engineering sector
in India and abroad.

A reputed German MNC based at BANGALORE, with core expertise in
CAD/CAM/CAE , is in urgent need of the following candidates from
AEROSPACE DOMAIN.

JOB DESCRIPTION #1: Design Engineer
Number of Openings: 10
Education: Graduate Engineer (minimum)
Experience: 5 - 8 years with at least 4 years relevant exp in
Aerospace domain
Mandatory Skills required:
Should have good design knowledge in CATIA V4/ V5
Detailed knowledge of Aero-structures
Understanding of relevant design standards
Desirable Skills:
Able to work independently and contribute to his best to the mixed design team
Knowledgeable in aerospace terminologies and design concepts
Able to interact with different teams
Leadership potential - technical or operational
Excellent communication skills
General Etiquettes (Emails, cross culture etiquettes)

JOB DESCRIPTION #2: Stress Engineer
Required Number: 5 numbers
Education: Graduate Engineer (minimum)
Experience: 5 - 8 years; at least 4 years relevant exp in Aerospace
domain
Mandatory Skills required:
NASTRAN, PATRAN
Experience in any CAD tool
Able to understand the requirements, construct test specifications,
create models, create meshing and run the analysis
Experience of Aero-structural hand calculations (Load estimations,
stress generation etc.,), report generation
Analysis/Design/Testing Techniques as applicable

Desirable Skills:
Able to work independently and contribute to his best to the mixed
design team
Knowledgeable in relevant aerospace terminologies
Able to interact with different teams
Leadership potential - technical or operational
Excellent communication skills
General Etiquettes (Emails, cross culture etiquettes)

Warm Regards

Gijo KV and Sumit Kumar
Co-Founders
SUVIDHAJOBS
New Delhi
Email: suvidha.delhi@gmail.com, cv@suvidhajobs.net
Web: http://www.suvidhajobs.net

[Guest-IJT]

CURRICULUM VIATE
SMRUTI RANJAN SASMAL
E-mail Id : smrutisasmal AT yahoo.com

PERSONAL DETAILS :
Father’s Name : Mr. GAGAN BIHARI SASMAL
Date of birth : 18th June 1987
Gender : MALE
Nationality : INDIAN
Marital status : UNMARRIED

OBJECTIVE :
To give continuous effort to innovate quick and easy way of increasing efficiency and converting ideas into reality. To interpret the technical problems & developing appropriate Products, tools and dies. Willing to work in an organization where I would like to add the value to an organization by using my cognitive skills and team-work sprit, improve systems innovation, creativity and smart work are appreciated and rewarded.

PROFILE :
A HIGHLY ADAPTABLE PROFESSIONAL ENGINEER with a total of 1 year 4 month’s (including in-plant training) extensive experience on Multiple Design Projects in the Component design and PrecisionTools.
Expertise in Design & Development.
Good Communication & Interpersonal skill.

STRENGTHS :
TAKING RESPONSIBILITIES OF
- Product Design.
- 3-D Modelling
- Drafting & Detailing
- Mould Design (Plastics)

CAREER SUMMARY :
Team Member (Design Engineer)
Completed six month’s In-plant training in CENTER TOOLING MOTHERSON INDIA LTD, CHENAI as a TOOLMAKER.
Working with ENGINEERS MECH (INDIA) PVT. LTD; GURGAON as a Design Engineer since July 2008 –TILL DATE. This company is Manufacturing of Automotive Door Handles, Auto Door Locking Linkages, Grip Parking Lever, Rear View Mirror Covers Window Regulators, Diesel Clamp, and Precision Plastic & Sheet Metal Parts.

CLIENTELE : -
- M/s Suzuki Motor Corporation, Gurgaon
- SUNVISOR INDIA PVT.LTD
- YAMHA Motors
- MINDA INDUSTRIES LTD.
- M/s SUPREME PLASTICS Ltd

TAKING RESPONSIBILITIES OF : -
- Product design & New Product Development.
- Detailed drawings for manufacturing in tool room
- Development of process & work layout
- Process Inspection & Standardization
- To analyze the problem arise in assembly
- To interact with vendors for improvement & complaint.

PROJECT DONE : -
- Battery cover mould for SUZUKI MOTOR CORPORATION. Modelling and mould design in UG (NX-4)
- Handle Door Trim mould for MARUTI UDYOG LTD. Modelling and mould design in UG (NX-4)
- Checking Gauge of Battery Cover for SUZUKI MOTOR CORPORATION. Modelling and mould design in UG (NX-4)
- ARM & MIRROR FRAME Mould for SUNVISOR INDIA PVT LTD. Modelling and mould design in UG (NX-4)
- Muffler mould for YAMHA MOTORS. Mould design in UG (NX-4)
- CASE UPPER & CASE LOWER Mould for MINDA INDUSTRIES LTD. Mould design in UG (NX-6)
- During In plant training : Handled project on following mould in tool room
‘Door trim’ mould [TATA FURESIA],
’Arm rest’ mould [MARUTI UDYOG LTD],
‘Rear bumper’ mould [GENERAL MOTORS]

QUALIFICATION :
- 10th from Board of Secondary Education, Orissa (2002)
- Post Diploma in Plastics Mould Technology, (2004-2008), CIPET, Bhubaneswar.
- Continuing AMIE (Mech.Engg.) in Institution of Engineers (INDIA).

SOFTWARE SKILL :
CAD/CAM
UG NX-4 & NX-6 (Modeling, Drafting, Assembly, Manufacturing)
CATIA V5R15 (Modeling, Drafting)
AUTO CAD -2006

DECLARATION :
I hereby declare all the above furnish information are true to the best of my knowledge and belief.
Place :
Date :
Smruti ranjan sasmal
(SIGNATURE OF APPLICANT)

[Guest]

RESUME
MANJUNATH BT
E-mail :manjunathbt2020 AT gmail.com

To work as a key player in a challenging and creative environment. Working hard and delivering results to the best of my abilities. I would enjoy opportunities to learn and explore new domains and ideas.

SYNOPSIS :
B.E (Mechanical) from H.M.S Institute of Technology, Tumkur.
Acquired practical knowledge through various trainings and academic projects.
Team player with strong analytical and leadership skills.

ACADEMIA
B.E Mechanical Engineering : H.M.S.I.T, Tumkur.
62.5% 2011
PU : Vivekananda P U College, Dr. Rajkumar Rd, Bangalore 51% 2007
S.S.L.C : Scholar Academy English High School, Bangalore . 70.24% 2005

SKILLS
Softwares known : CATIA V5 R19, Solid Edge V19, ANSYS 11 (Beginner)
Subjects of interest : Manufacturing process, Machine design, Automobile and production engineering

ACADEMIC PROJECT
Title : design and fabrication of portable biogas plants
for domestic purpose
Tenure : 1 month.
Team size : 4

[hancy]

CAREER OBJECTIVE :
To achieve a challenging profession in Aircraft design, analysis& manufacturing section , where my knowledge& creativity can be implemented for the development of the organization and myself

QUALIFICATION:
B.E in Aeronautical Engineering.

ACADEMIC CREDENTIALS:
Degree / Qualification Year Percentage :
BE(AERO) [Anna University Chennai] 2013 78.9%
HSC [Public Examination Board] 2009 79%
SSLC [Public Examination Board] 2007 85%

ACADEMIC ACHIEVEMENTS:
** 100% Attendance during 3rd & 4th semester.
** The company oriented project has to be done in TANEJA AEROSPACE LIMITED, Hosur.

TECHNICAL EXPERTISE:
SOFTWARE :
Designing : Auto CAD, Pro-E5.0., CATIA V5 .
Analysis : ANSYS, FLUENT.
Word processing and documentation : MS-Office-2012, Word Star.
Slide presentation and graphics : MS-Power point.
Operating System : WINDOWS 8, UBUNTU, MAC OS.
Multimedia tools : Adobe Premiere CS6, SONY Vegas pro.
Languages known : C++, Oracle.

AREAS OF INTEREST:
** Propulsion.
** Aerodynamics
** Finite element analysis.

INDUSTRIAL VISITS:
** NAL & HAL, Bangalore
** ISRO ,Trivandrum
** TAL, Hossur

PROJECT:
Title : “ADVANCED THRUST VECTOR CONTROLING USING ELECTRO MECHANICAL ACTUATOR”
Software’s used : Catia v5 and ANSYS
Description : A conceptual design & installation of electromechanical actuator system.

MINI-PROJECT:
Title : “LONG RANGE SUBSONIC STRTEGIC BOMBER AIRCRAFT”.
Software’s used : Catia v5 and ANSYS.
Description : A conceptual design of a subsonic stealth aircraft.

MEMBERSHIP IN ORGANIZING BODY:
** Member of Institute of Engineers India (IEI)
** Member of Indian Society Of Technical Education (ISTE)

PERSONAL DOSSIER:
Father’s name : M.M.MATHEW
Mother’s name : SHINEY JOSE
Date of birth : 21-04-1992
Mother Tongue : MALAYALAM
Languages Known : TAMIL, ENGLISH and MALAYALAM

PLACE: Alappuzha
DATE: 11.10.2012
Yours Sincerely,
HANCY MATHEW