BHEL Written Test : Details, Sample Questions, Answers

[Admin]

BHEL Written Test Details

1. Written test will consists of 240 multiple choice objective type questions.Test is designed to assess the candidate's Professional ( Technical) Knowledge of the chosen Engineering Discipline and Higher Aptitude covering area like Quantitative Aptitude, Reasoning Ability, Logical thinking, English usage, General Awareness etc.
1. Your performance in this written test will determine possibility of further considerations of your candidature.
3. There is a specific time limit for Written Test. Candidate will have to answer 240 questions in 2 hours and 30 minutes.
4. For each question, a choice of few alternative answers have been given, out of which only one alternative is correct. You have to choose the alternative, you think to be correct and indicate your choice on the OMR answer sheet.
5. Your admission to this Test is, however, provisional. The candidates are advised to ensure while applying that they fulfill the eligibility criteria and other requirements and that the particulars furnished by them are correct in all respects for the post applied for. Mere appearance at the Test does not entail you to make any claim for the post. You will be treated as debarred ab-initio in case you do not fulfill the essential eligibility criteria.
6. The Answer Sheet is a special OMR (Optical Mark Reader) sheet.
7. Use BLACK or BLUE Ball point Pen ONLY.
8. Every question will carry 1 mark. Negative marking to the extent of 0.2 marks per wrong answer will be applicable.
9. a) For answering the Test questions, there will be CIRCLES in the Answer Sheet. The chosen answer is to be indicated by darkening (encoding) one of the CIRCLES fully. Any other method of answering will be taken as incorrect answer.
For Example, If 10x+6=106, then 15X -10 will be . (1) 100 (2)140 (3)110 (4)80 (5) None of the above

Since correct answer is option (2), the CIRCLE 2 will have to be darkened (encoded) to fill the space completely like this:


The following are not correct methods of marking:

b) Darken only in the CIRCLES provided. Please do not make any stray marks on the answer sheet. This will be penalised.
c) Rough work must not be done on the Answer sheet. This will be penalised. You can use the Test Booklet for this purpose.
d) Change / Cutting / Overwriting / Erasing of CIRCLES is NOT permitted.

SAMPLE TEST QUESTION
Aptitude Test
Directions: In the following question, pick the choice whose meaning is opposite to the word shown in capitals.
1. HOI POLLOI:
(1) Cannibalism (2) Tyranny (3) The past (4) Aristocracy (5) Capitalist
Directions: In the following question, the descriptive sentence is aptly described by just one word. Select the choice which give the meaning most appropriately:
2. One who talks in his sleep:
(1) Somniloquist (2) Somnivocalist (3) Somnambulist (4) Somnalesist (5) None of these

Directions: In each question below you will find three words. The first two words are related to each other in some way. The third word is also related in the same way to one of the four alternatives marked as: (1), (2), (3) and (4). Find it out.

Directions: In each question below you will find three words. The first two words are related to each other in some way. The third word is also related in the same way to one of the four alternatives marked as: (1), (2), (3) and (4). Find it out.
3. REMAIN : STAY LEAVE: ?
(1) Good-bye (2) Run (3) Farewell (4) Depart

4. POET : VERSE SCULPTOR : ?
(1) Artist (2) Chisel (3) Statue (4) Marble

Directions: In each question below you will find words, four of which are alike in some respect; they have something in common and belong to one category. Only one word is different from them; it does not belong to the category to which the other four belong. Which word is different from the rest?
5. (1) Foot ball (2) Cricket (3) Polo (4) Chess (5) Hockey

6. (1) Eye (2) Nose (3) Tongue (4) Finger (5) Liver

7. In a code where a numeral represents an alphabet the most likely code for the word RECESS is:
(1) 913155 (2) 723245 (3) 865277 (4) 233300 (5) 983499

8. If in a code a,b,c, means `try your best', b,o,p,o means `try again & again' x,y,a means `all the best' - Then `your best again' is represented by
(1) c a o (2) p o c (3) a c p (4) y c a (5) o c y

Directions: In the following question complete the given series
9. 48,24,72,36,108, . . . . . . . . . . .
(1) 110 (2)115 (3) 64 (4) 54 (5) 125

10. Of the following numbers which one is the greatest?
(1) (0.6 x 0.6)-12 (2) 0.004 x 100 (3) (-0.7)4 (4) 0.2 x 0.2

11. Which of the following numbers is least?
(1) (1/4)2 (2) 49 (3) 4-9 (4) 42

12. It costs Rs.4.25 for two adults and their child to attend the Circus. If the child's ticket is half the price of adult's ticket, what is the price of an adult's ticket?
(1) Rs.0.75 (2)Rs. 1.70 (3) Rs.1.75 (4) Rs.1.44

13. If `a' is less than 50 and 'b' is less than 25, it follows that:
(1) a=2b (2) `a` is greater than b (3) a+b is less than 75 (4) a-b =25 (5) None of these


2A. TECHNICAL TEST (for Engineer Trainees)
PART 1 - GENERAL
1. A series combination of Resistance and Capacitor is put across a Thyristor to protect it from: (1) High Currents (2) High voltage (3) High rate of change of voltage (4) High rate of change of current
(5) Thermal run away 2. A Babbitt is: (1) An eutectic of iron and iron phosphide
(2) A gadget of measuring volume
(3) Antimony bearing lead or tin alloy
(4) A measure of magnetic induction produced in a material
(5) None of these above 3. An Induction motor is: (1) Self-starting with zero torque (2) Self-starting with very high torque
(3) Self-starting with smaller torque than the rated torque (4) None of the above

PART II - SPECIALISED FIELDS
ELECTRICAL ENGINEERING
1. The transformer capacity is 200 KVA, percentage impedance is 4% and tolerance impedance is 10%. The short circuit current in KA is:
(1) 0.39 (2) 8.21 (3) 8210 (4) 82100 (5) 0.821
2. A 20 KVA transformer was found to have 600 W Iron losses and 700 W Copper losses, when supplying full load at 0.8 power factor. The efficiency of the transformer on full load is:
(1) 92.5% (2) 91.2% (3) 100% (4) 98.2% (5) None of these
3. A water heater holds 20 litres of water. An electric immersion heater which will raise the temperature of the water from 10 degree C to 88 degree C in 55 minutes and efficiency of 85%. The rating in KW is
(1)7685000 (2)2330 (3)2.33 (4) 23.3 (5) None of these

ELECTRONICS ENGINEERING
1. A 10 Kw transistor is modulated to 80%. The average side band power will be:
(1) 1.8 KW (2) 8 KW (3) 3.2 KW (4) 4.6 KW (5) 4.26 KW
2. A resonant circuit has the resonance frequency 1 MHz and quality factor, Q, 100. Its 3-db band width is:
(1) 10 KHz (2) 5 KHz (3) 100 KHz (4) 20 KHz (5) None of these

MECHANICAL ENGINEERING
1. The inlet valve of a four stroke cycle I.C. engine remains open for nearly:
(1) 180o (2) 125o (3) 235o (4) 200o (5) 275o
2. Diesel cycle efficiency is maximum when the cut off is:
(1) Increased (2) Decreased (3) Maximum (4) Minimum (5) Zero

ANSWER KEY
1. APTITUDE TEST
1(4) 2. (1) 3.(4) 4.(3) 5.(4) 6.(5) 7.(1) 8. (1) 9.(4) 10.(1) 11.(3) 12.(2) 13.(3)

2A. TECHNICAL TEST - PART I - GENERAL
1(3) 2.(3) 3.(3)

PART II - SPECIALISED FIELDS
1. ELECTRICAL ENGG. 1. (2) 2. (1) 3.(3)
2. ELECTRONICS ENGG. 1. (3) 2. (1)
3. MECHANICAL ENGG. 1. (3) 2. (5)

The tests have been designed to determine whether you have a sound knowledge of your subject. You are, therefore, advised to revise all the sections of your course syllabus in order to prepare adequately for the test.

http://careers.bhel.in/etrlive/jsp/et_wrtest.jsp

[ranjank]

i need last five years solved questionpaper

[Guest]

can i get atleast last year ntpc paper for electrical

[Guest]

RESUME

NAME : K.Bheemaiah (K.Bheemesh)
kbheemesh1985 AT rediffmail.com
______________________________________________________________________________
CAREER OBJECTIVES
To work in challenging environment & use my potential to fullest exlent for the growth of your organization and my career, delivering the high quality output putting in sincere &dedicated efforts adapt my self with the changing technologies & utilize the same for the services of the hospital.
EDUCATIONAL QUALIFICATIONS
1. S.S.C
2. B.A
3. M.A (continue)
COMPUTER EDUCATIONS
1. PGDCA
DIPLOMA
1. M.P.H.W (M) nurse course in Apollo institute of clinical technology warangal
EXPERIENCE
1. 5 years 6 months working in thirumala nursing home nirmal (O.T. Technician)
2. As a operation theatre asst & O.T incharge in sigma hospital jeedimetla hyd, from 19-aug-2006 to till date.
3. As a insurance advisor in sbilife insurance & Appolo Munich health insurance past 5 months

[Guest]

KAYAVIZHI.K
Email : kayalvizhikuppusamy AT gmail.com

Career Objective :
To secure a challenging position where I can effectively contribute my skills towards the goals of the organization.
Academic Qualifications :
Qualification Discipline School/College Board/University Year of Passing % of Marks or CGPA
B.E Electronics & communication Vels srinivasa College of Engineering & Technology, Chennai Anna University,Chennai. 2011 72%
Higher Sec., M.P.C O.C.P.M Girls Hr.Sec School, Madurai State Board 2007 71%
S.S.L.C - O.C.P.M Girls Hr.Sec School, Madurai State Board 2005 87%

Area of Interest :
- Microprocessor
- Very Large Scale Integration
Software Proficiency :
Programming Languages C language(Basic concepts)
Operating Systems Windows XP
Software Packages Xilinx, MATLAB
Achievements :
- I had been the Captain of Challengers team in ‘Mission Possible’ workshop conducted in Vels srinivasa College of Engineering & Technology, Chennai.
Extra Curricular Activities :
- Attended National level Workshop in ‘ROBOTICS’ conducted in Saveetha Engineering College, Chennai.
Industrial Visits :
- Metrological Department in Meenambakkam,Chennai.
- Neyveli Lignite Corporation, Neyveli.
- Indian Institute of Astrophysics, Kavalur, vellore.
Inplant training :
Undergone one week training program in FOTRON Electric kits, training division, Chennai.
Mini Project Profile : Theft Alarm
Description : This is a circuit made by using IC555 to prevent the theft in houses by alerting the near by people by activating the siren connected to it. This is a handy circuit, so that the circuit can be fixed in the doors, gate locks by using a 5volt cell connection.
Project Profile : Drowsy driver sleep detection
Description : The project has been composed to avoid accidents during long drive due to drowsiness of the driver. An eye blink sensing system, intruder sensing system, buzzer system are the important parts of the project.
Personal Traits :
- Effective time manager
- Possessing positive self image
- Willingness to learn and elegant team facilitator
- Friendly, Flexible, Adaptability

[Guest]

CURRICULUM VITAE
OBJECTIVE :
Looking to obtain an opportunity in an esteemed organization to express my technical competency on a long-term basis and attain sustained personal and organizational growth.
EDUCATIONAL QUALIFICATION :
Class/Degree Institution Board Year Of Completion Percentage
B.E.* Electrical and Electronics Engineering E.S. College of Engineering & Technology - Villupuram Affiliated to Anna University 2011 70
HSC Oxford Matrc Hr.Sec.School-sankarapuram State Board 2007 85
SSLC Govt. Hr.Sec.School- Devapandalam State Board 2005 77

AREA OF INTEREST :
- Electrical machines
- Electronic devices
TECHNICAL SKILLS :
Languages : Java, C, C++
Operating System : MS Windows Family and MS DOS
Packages : MS Office 2003/2007,Mi -power
PROJECTS DONE :
Project Done in “PANTECH SOLUTION” ,Chennai
Project title : z source inverter based on PMBLDC motor
Team size : 4 members
Abstract of Project : In this project advantages of both PMBLDC motor and Z –source inverter can be used in light electric vehicles and any other adjustable drive applications. .
EXTRA CURRICULAR ACTIVITY :
- Participated in sports in the school days
- Participated in the ten days National Service Scheme Special Camping Programme
CO - CURRICULAR ACTIVITY :
- Participated in State Level Technical Symposium (Paper Presentation)
- Participated in Technical Symposium
- Participated in RETNEM in MIT, Chennai.

[immanuelraja]

IMMANUEL RAJA.N
Email : nirmalvictorir AT yahoo.in
________________________________________

CAREER OBJECTIVE
As a young and enthusiastic learner, I can achieve success in any field in my scope of knowledge. I am an extreme hard working kind of person. I can readily accept new challenging tasks and effectively execute them. I never hesitate to learn from my mistake and that is what differentiates me from my peers.

EDUCATIONAL QUALIFICATIONS
QUALIFYING EXAMINATIONS BOARD / UNIVERSITY YEAR PERCENTAGE
DR MGR EDUCATIONAL
B-TECH.(EEE) AND RESEARCH INSTITUE. 2008 - 2011 CGPA – 7.93
Maduravoyal, Chennai.
LAKSHMI AMMAL POLYTECHNIC COLLEGE,
DIPLOMA(EEE) KOVILPATTI. 2004 - 2007 67.4
State Board of Technical Education & Training, Tamilnadu.
NADAR HIGHER SECONDARY SCHOOL,
PANDAVARMANGALAM, KOVILPATTI.
S.S.L.C 2003- 2004 77.4
State Board, Tamil Nadu.
PROJECTS
B.TECH Project (8th Sem)
Title ‘WIND ARENA’
Type Construction of horizontal type wind turbine.
Duration 11 months
Advantage Eco friendly and cost effective construction
PROJECT DESCRIPTION :
The project is about construction of cost effective wind mill with the application of new design strategy for maximum efficiency, along with the application of fuzzy-logic system to implement advanced control methodology.
DIPLOMA Project (6th Sem)
Title NUMERICAL KEYBOARD OPERATED VARIABLE AC/DC VOLTAGE SELECTOR.
Duration 6 months
Advantage Over load protection and wide range of voltage selection from 1v to 300v.
PROJECT DESCRIPTION :
Voltage selection is the major problem now a day. By selecting a proper AC voltage we can obtain the better working capability. Here we are proposing a circuit with matrix keyboard and transformer with 230v primary and 10 individual windings for secondary. While entering some voltage into the keyboard corresponding relay will act and give the output we entered. So voltage selection easily obtained.

AREA OF INTEREST
- ELECTRICAL MACHINES.
- MICROPROCESSOR BASED CONTROLLING SYSTEMS.
- DIGITAL ELECTRONICS.
PERSONAL STRENGTH
- I AM POSITIVE AND HARDWORKING PERSON AND ALWAYS LOOK OUT FOR NEW PERPECTIVES AND CHALLENGES.
- LEADERSHIP WAS A KIND OF INHERENT QUALITY IN ME BUT I ALWAYS MAKE SURE THAT I RESPECT OTHER PEOPLE VIEW WHILE MAKING DECISIONS.
- DUE TO MY ROLE IN VARIOUS COMMITTEES IN OUR ASSOCIATION. I WAS ABLE TO DEVELOP GOOD TEAM SPRIT AND CAN LEAD PEOPLE EFFECTIVELY TOWARDS THE GOAL.
ACHIEVEMENTS
AT SCHOOL LEVEL :
- I WAS THE CLASS LEADER DURING MY TENTH LEVEL.
- I WAS ALSO A PART OF THE SCHOOL FOOTBALL TEAM.
AT COLLEGE LEVEL :
- AS AN ACTIVE MEMBER OF EETA (ELECTRICAL AND ELECTRONICS TECHNICAL ASSOCIATION). I HAD THE CHANCE OF ARRANGING MANY INDUSTRIAL VISITS TO PLACES LIKE ENNORE THERMAL POWER PLANT, NCTPS, POWER GRID AND I HELPED THE ORGANIZATION IN ARRANGING GUEST LECTURES AND SEMINARS THROUGHOUT MY TENURE.
- HAS PROVIDED VALUABLE CONTRIBUTIONS IN ORGANIZING THE NATIONAL LEVEL TECHNICAL SYMPOSIUM NEXUS-2009, CONDUCTED BY EETA (ELECTRICAL AND ELECTRONICS TECHNICAL ASSOCIATION). AT DR.MGR UNIVERSITY.
INTERESTS AND HOBBIES
- DANCING.
- LISTENING MUSIC.
- GAMING.
SOFTWARE PROFICIENCY
OPERATING SYSTEM : WINDOWS XP/VISTA/07.
PACKAGES KNOWN : MS-OFFICE,
LANGUAGES KNOWN : C, C++.
OTHER ACTIVITIES
- MOBILE HARDWARE SERVICING.

[immanuelraja]

can i get the solved Q&A for electrical...............

[Guest]

i want one word electrical questions in written test