www.jcbl.com Ltd Delhi : Automobile Design Engineer

[Admin]

JCBL Ltd Delhi : Automobile Design Engineer
Website : http://www.jcbl.com

About Us
JCBL - A name synonymous high quality, utmost safety, groundbreaking technology and futuristic styling. JCBL has to its credit a fine line of Buses, Special Application Vehicles, Election Campaign Vans, Display Vans, OB Vans, Radar Calibration Vans, Riot Control Vehicles, Mobile Homes And Offices, Life-Saving Ambulances, Cargo Boxes And Power-Packed Trailers.

A) General Manager (R&D)
- Minimum 20 yrs in Industry and 15 yrs in Automobile.
- Should be minimum B.Tech (Mech or Automobile).
- M.Tech or Doctorate in Mechanical Engg preferred.
- Experience in Automobile Design & Development specially in Chassis integration of bus or truck chassis.
- Familiar with all latest software like Autocad Inventor, Unigraphics, Catia.

B) Manager (R&D)
- Minimum 15 yrs in Industry and 10 yrs in Automobile.
- Should be minimum B.Tech (Mech or Automobile). M.Tech or Doctorate in Mechanical Engg preferred.
- Experience in Automobile Design & Development specially in Chassis integration of bus or truck chassis.
- Familiar with all latest software like Autocad Inventor, Unigraphics, Catia.

C) Sr Engineer/Engineer (Design)
- 3 to 7 years in automobile chassis / aggregate design specially in bus / truck chassis.
- Should be minimum B.Tech (Mech or Automobile).
- Experience in Automobile Design & Development specially in Chassis integration of bus or truck chassis.
- Familiar with all latest software like Autocad Inventor, Unigraphics, Catia.

Upload Resume :http://www.jcbl.com/pages/UploadResume.html

Meet Us at:
REGD. OFFICE:
L-1/18,
Haus Khaz Enclave,
New Delhi - 110016, INDIA.
Tel: +91-11-51519570.
email: contact@jcbl.com

CORPORATE OFFICE:
Plot No.75,
First Floor Industrial Area, Phase -1,
Chandigarh - 160 002, INDIA.
Tel : +91 172 3013095-96
Fax : +91 172 3013097

WORKS:
Ambala-Chandigarh Road,
Lalru, District Mohali,
Punjab - 140501, INDIA.
Tel: +91-1762-308200-201,
Fax : +91-1762-308236.

[Guest]

dear sir/madam,
i have done three year diploma & have six year experience in design field.

[Guest-IJT]

To,
Ms. Pragnya Nagar
ITT Corporation India P Ltd
Vadodara (Baroda), Gujarat, India

Sub : - Post required as a Sr. FEA Engineer (Vadodara) which suitable for M.E. Cryogenic (Mechanical) Engg.
I Have three years job experience after B.E. Mechanical in CAD as a Sr. Design / CAD Project Head.

Good Morning
Sir/Mem,

Thank you for giving me yours imperative time & I hope this mail reaches you in high spirit and good health.

I am NIMESH SONI, done Master of Engineering in Cryogenic from L.D. College of Engineering ‘Gujarat University’ in March-2011 Ahmedabad, India. My Dissertation/Project work in M.E. Study is “Experimental and ANSYS analysis for Inertance Type Pulse Tube Cryocooler With and Without Reservoir”. Till this day I have got Distinction and through out result from my Cryogenic (M.E.) examinations. My C.V. (Biodata) is in attachment.

My aim is to join my hands to your company and make my future with your company growth.

So, after your conformation I can join, As Soon As Possible.

* Previous Salary as a Design/Project Head
Before two years when M.E. Study is not started : - 2, 50,000/- INRs. CTC PER ANNUAL

* Expected Salary : - As your company policy. Salary is not big stuff for Suitable post.

I'll waiting for your healthy reply.

Should you need any assistance, please let me know.

I look forward to here from you soon.

Thanks & regards,

MR. NIMESH SONI
M.E. MECH. (CRYO) ENGG.
soninimeshk AT gmail.com
soninimeshk AT ymail.com

[V.Allwin]

RESUME

ALLWIN ULAGANATH.V
E-Mail id : allwinnath AT gmail.com
CAREER OBJECTIVE
Quest to work in a professional environment, which will enable me to develop my potentiality and efficiency, also to meet the challenges and excel in the field, where I can fully utilize my skills and knowledge.
EDUCATION
2006-2010 : B.E, Automobile Engineering with 63.00%*
Tamilnadu College Of Engineering,
Coimbatore, Tamilnadu.
2005-2006 : H.S.C State Board with 74.50% from
KEINS Matric Higher Secondary School,
Valliyur, Tamilnadu.
2003-2004 : S.S.L.C State Board with 78.18% from
KEINS Matric Higher Secondary School,
Valliyur, Tamilnadu.

SOFTWARE PROFICIENCY
Modeling Packages : Auto CAD 2010, Pro E.
Office Suite : MS office, Open Office.
AREAS OF INTEREST
- Automotive Designs
- Research and Development
- Production
- Alternate Fuels

SKILLS DEVELOPED
- Creativity(through innovative projects)
- Practical knowledge (through inplant trainings)
- Leadership (by coordinating technical symposium)

PROJECT DONE
Project title DESIGN OF FIXTURE FOR BACK PLATE ASSEMBLY WITH WHEEL CYLINDER STAGE FOR BAJAJ THREE WHEELER AUTO.

Place BRAKES INDIA, Padi, Chennai.
Abstract Designed a fixture using UNIGRAPHICS software and the analysis revealed that the designed fixture is successful.
EXTRA CURRICULAR ACTIVITIES
- I have won First place in district level Chess Tournament.
- I have secured First place in Inter School Chess Tournament.
- I have participated in Anna University zonal level Cricket Tournament.