Sofcon Group Saudi Arabia : SmartPlant 3D, PDS PDMS, Microstation, AutoCAD

[Admin]

We are a Leading Consulting Engineering Company in Saudi Arabia, we require the following qualified & experienced candidates for our various projects :
General Requirement : All Engineers should be conversant with International Codes and Standards and capable of working on all project activities found in the Process Plant Industries, from Conceptual Front End Design, to Detailed Engineering and Procurement, to providing support for Construction Management.

Senior Design Engineers - Civil :
Civil/Structural Engineering Degree with a minimum of 10 - 12 years engineering experience in the field of Civil Engineering, including; Site Development, Grading & Paving, Road and infrastructure design, process plant offsite piping systems, etc. Candidates should have a minimum of 5 - 6 years experience with the Process Plant, Oil & Gas, and Petrochemical Industries, and be familiar with current industry work processes and engineering software applications, including Bentley In-Roads.

Senior Design Engineers - Structural :
Civil/Structural Engineering Degree with a minimum of 10 - 12 years of engineering experience in both reinforced concrete and steel structures. Candidates should have a minimum of 5 - 6 years experience within the Process Plant, Oil & Gas, and Petro-Chemical Industries. Candidates Should have thorough knowledge of industry
standard software applications, including STAAD.Pro, have experience with Intergraph PDS, and SmartPlant Applications, and AVEVA PDMS, and be familiar with current industry work processes.

Civil Design Engineers :
B.S. Engineering Degree with a minimum of 7 years experience in Community & Industrial Infrastructure, site development, grading & paving, road works (plan & profile), utility piping etc.

Senior Design Engineers - Electrical :
Electrical Engineering Degree with a minimum of 10 - 12 years of engineering experience, and be conversant with International codes and standards Candidates should have a minimum of 5 - 6 years experience within the Process Plant, Oil & Gas, and Petro-chemical Industries, and will have been exposed to all electrical engineering activities and work process found in this sector, including the preparation of;
** Technical specifications and project instructions
** Technical calculations
** Electrical deliverables for the process plant industries
** Conversant with industry standard software applications, including Intergraph and AVEVA Electrical applications and ETAP
** Be a to work in a project task force environment with client representatives
** Assist with development of junior staffPreference will be given to candidates with Saudi Aramco, and Saudi Electricity Company experience.

Senior Design Engineers - Instrumentation :
Relevant Engineering Degree with a minimum of 10 - 12 years of engineering experience, and be conversant with International codes and standards. Candidates should have a minimum of 5 - 6 years experience within the Process Plant, Oil & Gas, and Petro-Chemical Industries, and will have been exposed to all instrument engineering activities and work processes found in this sector, including the preparation of;
** Technical specifications and project instructions.
** Technical calculations, including the sizing of control valve, pressure relief valves and flow meters.
** Experience with DCS, PLS, and ESD engineered systems found in the process plant industries.
** Experience with FieldBus Technology.
** Conversant with industry standard software applications, including Intergraph SmartPlant Instrumentation.
** Be able to work in a project task force environment with client representatives.
** Assist with development of junior staff.Preference will be given to candidates with Saudi Aramco experience.

Senior Design Engineers - Process :
Relevant Engineering Degree with a minimum of 10 - 12 years of engineering experience, and be conversant with International codes and standards. Candidates should have a minimum of 5 - 6 years experience within the Process Plant, Oil & Gas, and Petro-Chemical Industries, and will have been exposed to all process engineering
activities and work processes found in this sector, including the preparation of;
** Technical specifications and project instructions.
** Technical calculations for sizing of static and rotating equipment, horizontal and vertical vessels, and process and utility piping systems, for onsite and offsite process units.
** Conversant with industry standard software applications, including AspenTech Process Evaluator, KBase, and Hysis, including Intergraph SmartPlant applications.
** Be able to work in a project task force environment with client representatives.
** Assist with development of junior staff.Preference will be given to candidates with Saudi Aramco experience.

Senior Design Engineers : Static and Rotating Equipment :
Mechanical Engineering Degree with a minimum of 10 - 12 years of engineering
experience, and be conversant with International codes and standards. Candidates should have a minimum of 5 - 6 years experience within the Process Plant, Oil & Gas, and Petro-Chemical Industries, and will have been exposed to all equipment engineering
activities and work processes found in this sector, including the preparation of;

** Familiar with ASME Boiler and Pressure Vessel Code, in particular ASME Section VIII Div 1 & 2.
** Technical specifications and project instructions
** Technical calculations for sizing of static and rotating equipment, horizontal and vertical vessels, including Pressure vessels, tanks, exchangers.
** Conversant with industry standard software applications including; HTRI, HTFS, FLARNET, PV Elite, PV Tank, TEMA.
** Be able to work in a project task force environment with client representatives
** Assist with development of junior staffPreference will be given to candidates with Saudi Aramco experience.

Senior Design Engineers (HVAC) :
Relevant Engineering Degree with a minimum of 10 - 12 years of engineering
experience, and be conversant with International codes and standards. Candidates should have a minimum of 5 - 6 years experience within the Process Plant, Oil & Gas, and Petro-Chemical Industries, and will have been exposed to all HVAC activities and
work processes found in this sector, including the preparation of;
** Technical specifications and project instructions
** Technical calculations for the design of HVAC systems and applications for industrial and commercial applications, including the process plant industries.
** Conversant in ASHRAE, SMACNA, ASTM, NFPA, AMCA and other HVAC industry codes and standards
** Conversant with industry standard software applications, including; CHVAC, HAP, Load Express.
** Be able to work in a project task force environment with client representatives
** Assist with development of junior staffPreference will be given to candidates with Saudi Aramco experience.

Senior Design Engineers : Buildings :
Relevant Engineering Degree with a minimum of 10 - 12 years of engineering experience, and be conversant with International codes and standards. Candidates should have a minimum of 5 - 6 years experience within the Process Plant, Oil & Gas, and Petro-Chemical Industries, and will have been exposed to appropriate building and structure design codes and work processes found in this sector, including the preparation of;
** Technical specifications and project instructions
** Technical calculations for the design of building structures and coverings from conceptual design, to detailed engineering, including the production of fabrication and construction deliverables.
** Conversant with industry standard software AutoCAD, Microstation and 3D Studio Max. including HVAC systems and applications for industrial and commercial applications, including the process plant industries.
** Be able to work in a project task force environment with client representatives
** Assist with development of junior staffPreference will be given to candidates with Saudi Aramco experience.

Senior Design Engineers - Communication :
Relevant Engineering Degree with a minimum of 10 - 12 years of communication and data management experience, and be conversant with International codes and
Standards, and work practices. Candidates should have a minimum of 5 - 6 years
experience within the Process Plant, Oil & Gas, and Petro-Chemical Industries, and can demonstrate experience in :

** Data Network Engineer :
** Candidate should be Cisco and Microsoft Certified, with minimum 4 - 9 years experience in the design of ATM and Ethernet (LAN / WAN).
** Data Engineer responsible for data network design and documentation. Project responsibilities will include visits to client locations, document retrieval, and LAN/WAN design and integration.
** Senior Outside Plant Network Design Engineer :
** Responsible for cabling copper and fiber design and distribution. Including; conduit system, splicing technology, encasement and Protection.
** Conversant in performing engineering studies in the planning and design of Telecommunication networks for outside plant network for fiber optics and copper cable in the process plant industries.
** Must be able to conduct engineering surveys of existing infrastructure, and proposed outside plant facilities, including the preparation of land use permits.
** Coordinate with the client regarding provision of telephone facilities on existing and proposed structures. The preparation of exchange demand forecast, and the documentation for primary cable and manholes and conduit network, prepare detailed engineering design for primary and secondary cable distribution, fiber loop network for remote switching unit and Central office interconnection, and manhole and conduit job. Prepare bill of materials and cost estimates of the outside plant project.
** Be able to work in a project task force environment with client representatives.
** Assist with development of junior staff

Preference will be given to candidates with Saudi Aramco experience and exposure to GTE and BICSI standard is required.

Senior CADD Group Leader : Design Supervisor :
1. Piping
Design Supervisor responsible for the assignment and scheduling of project work. A minimum of 8 -10 years experience within the Process Plant, Oil & Gas, and Petro-Chemical Industries. Familiar with project execution strategies using 3D modelling including Intergraph SmartPlant 3D, PDS; AVEVA PDMS, Microstation and AutoCAD. Reports to the discipline lead engineer on a project, and ensures that the communication flow is maintained across the piping discipline and other design and engineering activities.
2. Building Engineering/Architectural
Design Supervisor responsible for the assignment and scheduling of project work. A minimum of 8 -10 years experience within the Process Plant, Oil & Gas, and Petro-Chemical Industries. Familiar with project execution strategies for infrastructure engineering using 3D modelling including Intergraph SmartPlant Applications, Microstation, AutoCAD and 3D Max. Reports to the discipline lead engineer on a project, and ensures that the communication flow is maintained across the building engineering/architectural discipline and other design and
engineering activities
3. Civil / Structural
Design Supervisor responsible for the assignment and scheduling of project work. A minimum of 8 -10 years experience within the Process Plant, Oil & Gas, and Petro-Chemical Industries. Familiar with project execution strategies using 3D modelling including Intergraph SmartPlant 3D, PDS Frameworks; AVEVA PDMS, Microstation and AutoCAD. Reports to the discipline lead engineer on a project, and ensures that the communication flow is maintained across the civil / structural discipline and other design and engineering activities
4. Communications
Design Supervisor responsible for the assignment and scheduling of project work. A minimum of 8 -10 years experience within the Process Plant, Oil & Gas, and Petro-Chemical Industries. Familiar with communication project execution strategies and deliverables using Intergraph, AVEVA, Microstation and AutoCAD applications. Reports to the discipline lead engineer on a project, and ensures that the communication flow is maintained across the communication discipline and other design and engineering activities
5.Instrumentation
Design Supervisor responsible for the assignment and scheduling of project work. A minimum of 8 -10 years experience within the Process Plant, Oil & Gas, and Petro-Chemical Industries. Familiar with project execution strategies using 3D modelling including Intergraph SmartPlant Instrumentation; AVEVA PDMS, Microstation and AutoCAD. Reports to the discipline lead engineer on a project, and ensures that the communication flow is maintained across the instrumentdiscipline and other design and engineering activities.
6. Electrical
Design Supervisor responsible for the assignment and scheduling of project work. A minimum of 8 -10 years experience within the Process Plant, Oil & Gas, and Petro-Chemical Industries. Familiar with project execution strategies using 3D modelling including Intergraph SmartPlant Electrical; AVEVA PDMS, Microstation and AutoCAD. Reports to the discipline lead engineer on a project, and ensures that the communication flow is maintained across the electricaldiscipline and other design and engineering activities.

send your CV at : recruit AT sofcongroup.com
employment AT sofcongroup.com
hrd AT sofcongroup.com

Karawan Towers, South Block, King Faisal Road, Al-Khobar
P.O.Box : 3998, Al-Khobar 31952, Kingdom of Saudi Arabia
www.sofcongroup.com

[Guest]

JANESH KV
jann_kuttu AT yahoo.com
jannkuttu AT gmail.com
Seeking a position where my skills & experience can be effectively utilized in an organization which offers a challenging environment along with scope for flexibility and innovation.
ACADEMIC QUALIFICATIONS :
Qualification :
Institution :
Diploma in Mechanical Engineering Board of Technical Education Kerala.
Polytechnic Palakkad Kerala, India
Draughtsman(Mechanical) NCVT (National Council for Vocational Training)
Industrial Training Institute Thottada, Kerala, India

PROFESSIONAL EXPERIENCE IN DETAIL :
KEPPEL FELS OFFSHORE & MARINE, SINGAPORE
Position : Senior Designer Duration: July 2007 – till date
Job Profile. :
- Preparation of Machinery Arrangement Layouts as per basic design on the basis of statutory Marine codes.
- Modeling of Equipments and HVAC Duct routes using software Smart marine 3D and PDS.
- Designing & detailing of Machinery & HVAC for Accommodation module, Hull ventilation System Control Rooms, Engine room, Mud pump room etc. in line of International Codes & Standards like ABS, ASHRAE, DNV etc along with the owner Specification
- Preparation of Design drawing Such as Duct Layouts, P&Ids,Damper Schedule, Fan List and Weight & C.G Reports
- Conducting walkthrough and interference check with various disciplines and subsequent interference resolution
- Conducting audit sessions to evaluate whether the designing of the of Rig machinery & HVAC Systems in line with the International Codes & Standards like ABS, ASHRAE, DNV etc along with the owner Specifications.
- Experience in planning, organizing, leading & controlling of project activities including project co-ordination among the different departments as well as with outside multinational consultants, vendors.

Projects :
Semi-submersible drilling tender :
Class : WEST BERANI- SSDT 3600E Tender Rig Client- Seadrill Asia Ltd
It consists of a non self-propelled column stabilized semisubmersible drilling tender, with capacities appropriate for operation in remote locations and has the capability of self-setting platform packages
- Two hulls-(Length overall 308 ft x 41ft x 20 ft) with two pump rooms
- Six stability columns, (Length-40ft. Width-30ft. & Height-42ft.)
- Main Deck-quarters, engine room, mud pit, mud pump room and storage areas

Mobile Offshore Drilling Unit (Jack-Up) :
Vessel Type : Jack Up Client: Petrovietnam Drilling Investment
The Self-Elevating Drilling Unit is being designed for a drilling depth up to 30,000ft.
It consists of modified triangular hull (234ft. long, 208 ft. wide, and 25 ft. ) with three triangular truss legs each fitted with a spud can with tip at its lower end.
OCEAN MONARCH - Ultra deep water drilling conversion
Vessel Type : Semi Submersible Client: Diamond Offshore, Houston
PV DRILLING III - KFELS B-Class- Mobile offshore drilling unit
Vessel Type : Jack Up Client: P.V. Drilling, Singapore
FLUID CONTROL RESEARCH INSTITUTE Palakkad, India
Position : Snr.Draughtsman Cum Supervisor Duration: From June 2005 to june 2007
Fluid Control Research Institute (FCRI) featuring the premier institute in Fluids Engineering in South East Asia for R&D on flow products, Testing and Calibration of Valves, flow meters and other measuring instruments as per ISO requirements.
Job Profile :
- Preparation of piping layout and test set up for water flow laboratory, Air flow Laboratory and Oil flow laboratory.
- Schematic diagram of various set up for projects.
- Preparation of drawing for Manifolds, Supports, Weighing tank test line, etc. for new test facility.
- Drawings are prepared for machine components where the fits and tolerance are used.
- Computation of drawings using Auto Cad 2005 & 2006 and 3D modelling .
INSTRUMENTATION LIMITED, PALAKKAD :
Position : Draughtsman Duration: From June 2003 to june 2005
Job Profile
- Preparation of various parts drawing, assembling of control valves, jigs & fixtures and testing tools etc. using software’s like AutoCAD.
- 3D Modeling of designed components using AutoCAD & Mechanical Desktop.
- Designing of valves and components as per International Standards.

ADDITIONAL PROJECTS UNDER TAKEN :
- Prepared Drawings for multinational oilfield company on contract basis. Prepared 3D models of Drilling tools made by Drilling System International
- Preparation of Machinery lay out drawings and 3D Modeling of structures, interior designing and Out fitting drawings etc.

HOUSE TRAINING UNDERGONE :
- Safety and confined Space entry training from Singapore.
- Training for Smart Marine 3D at Keppel Fels Mumbai.
- Training for Micro station and PDS.
- Training for Hull penetration standards.
- Training Program in Drilling Technology (By Mr.Leonard Roe Drilling Technology adviser)
- Teambuilding course through KOM Values Workshop

SOFTWARE KNOWLEDGE :
- Smart Marine 3D
- PDS and Micro station
- AutoCAD – 2D & 3D
- 3D STUDIO MAX -Release-6.
- Pro-Engineering (3D Designing)
- PHOTOSHOP -Release-7

[Guest]

Resume :
Siji Mamman George

E mail : sijipallipad AT yahoo.co.in
sijipallipad AT gmail.com

Objective : Seeking a challenging and rewarding position in a progressive organization with an environment where my initiative for personnel development will contribute to achieve the goals to the organization.
Academic Qualification :
Degree, Pre- Degree
Technical Qualifications :
a) Diploma in Computer Application
b) D/ Mechanical
c) Diploma in Industrial Safety
d) Knowledge of Electronic Typing
Professional Experience Summary – Overseas
o Ramsis Engineering, Bahrain – Document Controller
o Target LLC, Oman – Document Controller / Secretary
o KEO International Consultants, Oman – Document Controller
o Petroleum Development Oman – Document Controller
o Bahwan Engineering Co., Oman – Document Controller / Secretary
o Kharafi National Co, Kuwait – Document Assistant / Secretary
o Kuwait National Petroleum Co. (KNPC- Kuwait) - Document Assistant / Secretary
o IHAB Establishment, Saudi Arabia – Secretary/ Documentation Clerk.

Job Profiles :
(1) Oct 04, 2010 to Till date : Ramsis Engineering , Bahrain
Designation : Document Controller
1. Project : Lube Based Oil Project, Sitra - Bahrain
Main Contractor : SAMSUNGEnginering Co.Ltd.
Client : BAPCO
2. Project : Produced Fluids & Water Treatment Plant – Tatweer Petroleum
Main Contractor : Veolia Water Solutions
Client : Tateer Petroleum
Responsibilities on this project are :
Daily updating of document control register of drawings, Method Statements, RFI’s, Incoming and outgoing letters.
All technical documents /drawings transmittals uploading on ftp server for our client – Veolia Water France
Maintain & Distribution of Drawings
Preparation of Document Transmittals and Outgoing letters
Correspondences with Clients and Sub contractors.
Scanning of Drawings and all technical documents.
Keeping and maintaining of Electronic copies and Hard Copies of all documents related to concerned project.
Arrangements of meeting with Sub contractors /Consultants and Clients
Filing and record keeping
Preparation of Daily report, weekly report and monthly report with Planning Engineer
Preparation of Minutes of Meeting
Other office routine works.
Report to Project Manager

(2) 12 June 2009 to 20 May 2010 : Target LLC, Oman
Designation : Document Controller / Secretary
Project : Water Supply Scheme- Qurayat, Oman
Client : Public Authority of Water and Electricity
Responsibilities on this project were :
Maintaining & Distribution of all project incoming and outgoing documents.
Maintaining & Distribution of Project drawings & Shop Drawings
Scanning of Drawings and all technical documents.
Keeping and maintaining of Electronic copies and Hard Copies of all documents related to concerned project.
Preparation of Document Transmittals, Letters and Memos etc.
Preparation of Daily Reports and RFI’s
Preparation of Minutes of Meeting
Updating RFI Log and Drawing log
Distributing outstanding Log’s to the concerns
Follow up with outstanding / pending log with concerns
Attending to Clients and consultants
Correspondence with Consultant and Sub Contractors
Internal Correspondence with Outlook & fax ( Site office and Head Office)
Filing and Record Keeping
Handling and Controlling Office Stationeries
Other Office Routine works
Report to Project Director

(3) 21 June 2008 to 29th January 2009
KEO International Consultants, Oman
Designation : Document Controller
Project : Al Bustan Palace Hotel Refurbishment Project – Oman
Client : Ministry of Tourism
Responsibilities on this project were :
Maintains & Distribution of all project incoming and outgoing documents.
Attending to Clients and Subcontractors
Arrangements of Meeting with Clients
Preparing of Monthly Report and to be submitted to Ministry
Scanning of Drawings and all technical documents.
Keeping and updating of soft copy and hard copy of Drawings
Documents’ updating in EDMS
All incoming and outgoing documents will be added in the system through EDMS.
Mainly handled documents were : Contract Drawings, Shop Drawings, incoming and outgoing letters, Inspection requests, RFI’s, MAS etc.
Filing and Record Keeping with ISO Standards
Follow up with Concerns about pending documents to submission & reply
Outstanding submittal log will be submitted to all engineers and related concerns
Report to Project Manager

(4) August 28th 2007– 30th April 2008 :
PDO - SRDC Project, Saih Rawl – Oman
Designation : Document Controller
Project : Saih Rawl Depletion Compression (PDO) in Oman
Client : Petroleum Development Oman
Responsibilities on this project were :
Maintains and Distribution of all Project incoming and outgoing documents, log-in registration, filing, archiving and disposal of documents. Register the documents in Document Control Record.
The mainly handled documents are :
Project General Document (ADP, PEP, etc)
Correspondences (Fax, Letters, IOM, email...)
Other General Business Documents, Engineering Drawings and Shop Drawings
Preparation of Daily Progress report and MOM
Scanning of Drawings and technical documents
Attending to consultants and clients
Arrangements of meeting and travel schedules of PDO’s Superiors
Connection with HSE Department and Prepare to close the Safety issues
Correspondence with Contractors and sub Contractors
Keeping record of all Drawings and technical documents ( Soft and Hard copies)
Other office routine works
Report to Company Site Representative.

(4) May 19th 2007 – August 25th 2007 :
Bahwan Engineering Co, Oman
Designation : Document Controller
Project : Sohar Fertilizer Project (BEC) in Oman
Client : M/s. Mitsubishi Heavy Industries – Japan. (Construction of Ammonia and Urea Plant)
Responsibilities on this project were :
Maintains and Distribution of all Project incoming and outgoing documents, log-in registration, filing, archiving and disposal of documents. Register the documents in Document Control Record.
Preparation of Daily Progress report and MOM
Distribution of Revision Drawings to Concerned Supervisors
Scanning of Drawings and technical documents
Attending to consultants and clients
Correspondence with Head office and sub Contractors
Keeping record of all Drawings and technical documents ( Soft and Hard copies)
Other office routine works
Report to Project Manager

(5) Nov.15th 2004 – March 31st 2007 :
Kharafi National (For KNPC) Kuwait
Designation : Document Assistant
Project : Mechanical Maintenance Contract in Mina Abdulla Refinery
Client : Kuwait National Petroleum Company
Responsibilities on this project were :
Maintains and Distribution of all Project incoming and outgoing documents, log-in registration, filing, archiving and disposal of documents. Register the documents in Document Control Record.
Marinating and Distribution of Documents
Scanning of Drawings and technical documents
Marinating and updating of catalogues and Vender books in library
Correspondence with other departments in KNPC
Assist to Team Leader – Workshop & General Works
Preparation of leave schedule and shift schedule of KNPC Employees
Preparation of vehicle maintenance record and fuel distribution record of hired vehicles
Keeping record of all Drawings and technical documents ( Soft and Hard copies)
Other office routine works

(5) Dec 15th 1995 – Sept 19th 2001 :
IHAB Est., Al Khobar, Saudi Arabia
Designation : Secretary/Documentation Clerk
Client : Saudi Arabian Oil Company
Responsibilities on this project were :
Maintains and Preparation of Technical Submittals and Assist to Preparation of BOQ
Correspondence with clients and suppliers
Preparation transmittals and outgoing letters
Issuing of purchase orders and material delivery follow ups.
Scanning of documents
Inspection Packages to be submitted to the client before the Equipment Inspection
Filing and Record Keeping ( Soft and Hard Copies)
Correspondence with Site offices and follow up all matters related to progress of work.
Other Office routine works
Spare Parts data packages to be submitted to Saudi Aramco for the Major High Voltage / Medium Voltage / Low Voltage equipments that were being installed in IWWTP Project Rastanura, Power plant Project in Rabigh, Safania Etc...
Report to Project Director

From the Periods : 1992- 1995
1. Worked as Secretary in M/s. Chaitanya Contractors & Engineers ltd in Mumbai – India
2. Worked as Office clerk /Secretary in M/s. Mazda Colours Ltd. in Mumbai – India

[Unregistered]

Plant 3D Modeling & Integration Services :

TRIPOD PROJECTS AND CONSULTANCY PVT LED, INDIA is rendering specialist Plant 3-D Modeling and Integration services using latest 3-D engineering software and cutting edge technologies at competitive cost. Our special expertise is, executing the detailed engineering of projects by modeling all the civil, structural, equipment and piping of the plant in three dimensions on Intergraph’s Plant Design System (PDS) and extracts all construction deliverables from the 3-D model.We offer specialist services using softwares
- Intergraph’s SmartPlant 3D, SmartPlant PID, SmartPlant Instrumentation (Intools), SmartPlant Electricals (SPE), Smartplant Foundation(SPF)
- Intergraph’s Plant Design System (PDS)
- Aveva’s Plant Design Management System (PDMS)
- Intergraph’s CADWORKS
- Bentley’s Plant Space software tools.
Our specialist services include :
- Mobilize crew of Specialist Database Administrators, Engineers and Designers to handle 3-D Plant Deign Project
- 3-D Project Creation and Project Database set-up
- 3-D Modeling and Integration of 3-D Models of the Plant
- Clash checking and deliver clash-free Model
- Extraction of 2-D Multi discipline Layouts deliverables from 3-D Model
- Extraction of Isometric Fabrication Drawings deliverables from 3-D Model
- Extraction of Bill of Materials deliverables from 3-D Model
- Extraction of construction views from 3-D Model
- Set-up 3-D Models and Review Models at construction site
- Offer construction support services
- Data Consistency Check of 3-D Model Data with intelligent P&IDS & Intelligent Data
- Integration of 3-D Model Data to Existing Client Database

Please contact :
Tripod Projects and Consultancy Private Limited
22F, Second Floor, North Phase,
Thiru-Vi-Ka Industrial Estate, Ekkattuthangal,
Chennai - 600032, INDIA

Tel : +91-44-22254967
Fax : +91-44-22254977