www.luridengg.com Lurid Engineering Technical Consultancy Services Pvt Ltd Chennai : PDMS PDS Piping Design Engineer

[Admin]

luridengg.com

Welcome to career at LETS. Our people change the world with a go getting & can do spirit forged by years of experience and a number of Detailed Engineering, Design Projects around the world. We're a right place to channelise your talent. Here you will experience exciting projects and new professional practices and cultures, further developing your skills and benefiting from an environment that's creative, groundbreaking and, above all, supportive.

OUR REQUIREMENTS
* Senior Mechanical Engineers
* Piping Designing Engineers (more than 5 years of Experience)
* Stress Analysis Engineering (Using Ceaser ll Software)
* Lead Piping Designers (more than 10 years of Experience)
* Senior Piping Designers (more than 5 years of Experience)
* Piping Designers (more than 3 years of Experience)
* PDS/PDMS Piping Designers
* Piping Draughtsman(above 2 years of Experience)
* Senior Electrical Engineers (in the field oil and gas above 6 years of Experience)
* Senior Structural Engineers (above 10 years of Experience)
* Structural Engineers (above 5 years of Experience)

Lurid Engineering and Technical Consultancy Services Private Limited is a design and Engineering solution provider primarily in Oil and Gas, Power and Petrochemical industries.

We are a team of dynamic young enterprising individuals started this business 2 years before. Our prime objective is to satisfy our clients by providing a quality and cost effective solution for their Information Technology (IT) and /or engineering problems.

Administrative Office :
New No 356, Anna Salai,
Thousand Lights,
Chennai - 600 040.
Call us at +91 - 44 - 3910 2022 / 2829 0842
Web www.luridengg.com
infolurid@yahoo.com

[hiten_ckpcet]

Hitendra Chaudhari,
surat
Gujrat

To
Respected Sir,
I have completed my B.E in Mechanical Engineering in the month of july 2009.and I have completed PGD in piping engineering in march-2010 Since I am a fresher I am looking for a suitable job of my field and a good platform where I can work with full devotion & enthusiasm. I wish to stand with a solid backbone to make feel proud of my employer with my hard work and loyalty.

Sir, I would be grateful if you could consider my candidature for the job of suitability and provide me an opportunity to prove my worth. I am enclosing my resume for your kind consideration and favorable reply please.
Thanking you.
Hitendra chaudhari

Curriculum Vitae
HITENDRA CHAUDHARI. (B.E. Mechanical)
48, Om nagar society; Parvat patiya; Surat–395010, Gujarat, INDIA.
Ph: (R) +91 261 2365319
(M.) 09561758615
Email: hiten_ckpcet AT yahoo.com
________________________________________
Objectives
- Applying knowledge and theories learnt and acquired, to obtain best end results.
- Improving human relations and to work as a team member.
- Be part of a process in the image building of the company.
- Developing systems and methods which can benefit the organization.
- Completing Work entrusted with full honesty and sincerity.
- Gaining experience and learn skills from assignments offered, while at work.

Academic Qualification
Disciplinary Profile : Bachelor Of Engineering in Mechanical
[ B.E. ( Mechanical ) ]

Course Year Board/University Percentage
S.S.C MARCH 2003 GSEB 79.00 %
H.S.C MARCH 2005 GSEB 50.61 %
B.E. Mechanical JULY 2009 VNSGU 58.83 %

Having sound knowledge of
- Pipe sizing, Thickness Calculation.
- Extraction of ISOMETRIC drawing from G.A. drawing.
- Plot plan of equipment layout & Piping layout.
- Preparation of MTO for piping & Technical Specification (Pipes & Pipe fittings, VALVES.)
- Knowledge of ASME CODE and apply in the designing of Piping.
- Comfortable with PT rating calculation of lines.
- Comfortable with Miter bend calculation, Reinforcement calculation.
- Comfortable with pipe rack design. Preparation of PFD and review P &ID for Piping.
Software Skills:
- AUTO DESK INVENTOR
- Auto CAD
- Microsoft Office

Project (Final Year )
Name : ENERGY MINIMISION OF TFO(TWO-FOR-ONE) MACHINE
Duration : 1Yr
Organization : C.K.PITHAWALA COLLEGE OF ENGG. & TECH , SURAT.
Team Size : 4
Details : FOR SAVING THE ENERGY CONSUMPTION OF ELECTRICITY WE HAD CHAGED SOME OF THE EXISTING MECHNISEMS WITH MODIFIED ONE, WHICH HAD IMPROOVED EFICINCY OF MECHINE.


Personal Particulars
Full Name : Chaudhari Hitendrakumar Laxmanbhai.
Father’s Name : Chaudhari Laxmanbhai Gangaram.
Age / Gender : 21 Years / Male
Date Of Birth : 17th February, 1988.
Marital Status : Unmarried
Hobby : - Interacting with different people, ,Getting information about new development in Technical field through internet,
- Music , Travelling , Playing Carom & Badminton.
Email : hiten_ckpcet AT yahoo.com

Nationality : Indian
Languages Known : English, Hindi, Gujarati, Marathi.

Extra Activities
- Participated in Paper Presentation at C.K.Pithawala College of Engineering in 2007.
- Worked as a committee member in tech fest of college in 2008.

Herewith, I declare that all the information disclosed by me is true to the best of my knowledge & belief.
Hitendra Chaudhari.
B.E. (Mechanical)

[Pooma]

Dear Sir/Madam Good Morning:

With Reference To Your Advertisment On The Newspaper /Internet For The Post Of PIPING DESIGN ENGINEER In Your Esteemed Concern. I Herewith Attached My Updated Resum For Your Kind Reference. I Have Good Experience In Piping Design Engineer And Am Waiting For Your Good Reply.

Total Experience:- 6+ years
Current Designation:- Piping Design Engineer
Current Organization:- ST INFOSYS at Jaipur
Current Annual Salary:- 3+ Lac
Expected Annual Salary:- As Per Company Norms
Notice Period:- 20 Days
Contact No:- + 91 9166330121 and +91 9600458814
Nationality:- Indian
Date of Birth:- 10-03-1985

Lot of Thanks
Best Regards:
POOMA
+91 9166330121
+91 9600458814

POOMARIAPPAN

Origin : 10th March 1985 – Indian
Language Known : English and Tamil and Hindi
Address : 44, Esana Pothi Kovil Street, Vasudevanallur, Tamilnadu, India. Pin-627758.
Passport no : F7161830
Contact : (+91) 9166330121 & (+91) 9600458814 & (91) 04636241759
Email id : poomainfo AT gmail.com & poomainfo AT ymail.com


OBJECTIVES
Highly motivated self starter, seeking a career opportunity as a PIPING DESIGN ENGINEER were I may utilize my knowledge, skills and abilities acquired through education and work experience. I have lot of interest to learn new things in Engineering Design and further my work efficiency. I am a team player and always believe in team work and synergy in work place. I will support the Team Leader in meeting tight time schedule and be flexible.

PROFILE PIPING DESIGN ENGINEER
- Total Experience of 6.5+ years in India and Singapore.
- Area of Experience in Oil & Gas Plant and Power & Process Plant and Refineries and Petrochemical and Offshore & Onshore Platforms and Mechanical Industrials.
- Experience in Equipment Modeling and Piping Designing and Drawing Manager and Isometric Drawing Manager and Preparing of Process Flow Diagram and Mechanical Flow Diagram and Utility Flow Diagram and Piping and Instrumentation Drawing General Arrangement Drawing and As-Built Drawing and Drafting are using in PDS 8.0 and Microsation 8.0 & CADPIPE 9.0 and AutoCAD 2009
- Experience in Layout Plan Drawing and Unit Plot Plan Drawing and Equipment Location Drawing.
- Experience in Drawing Manager and ISO Generation and Bulk MTO Generation.
- Preparing As-built documents and manuals for final submission.
- Enhancement in engineering design, documents / drawings submission and approval
- Experienced for Design in Hydraulics and Pneumatics and Gear Mechanisms
- PDS report generation for both Under Ground Piping and Above Ground Piping.
- Product Fabrication drawing and Assembly drawings and Civil drawings and Structures drawings and Sheet metal drawings and Electrical cabling & Hardness design drawings are preparation
- Theoretical and Practical Training in the areas of Mathematics, Geometric Dimensioning and Tolerance Properties, Measuring Instruments, Gauges and Rockwell Hardness Testers, Metrology, CNC, Material science, Heat Treatment, Industrial Safety, House keeping, Material handling, Workshop calculations, Engineering Drawing, TQM and TPM.

EDUCATION

Qualification : DIPLOMA IN MECHANICAL ENGINEERING
Class : FIRST CLASS WITH HONOURS APRIL 2003
Institution : N.M.S. Kamaraj polytechnic college, Nagercoil 629501, Tamilnadu, India.

PIPING ENGINEERING

- Basics in Piping Engineering
- Overview of Piping Systems in Industries. And Plant Location and Project Management
- Internal and External Design Pressure and Testing of pipe lines. Pipe Loads and Pipe Supports.
- Piping Materials Specification and Components Specification and Insulation of Piping.
- Valves – Functions and Detailed Construction and Selection of Valves
- Pumps – Centrifugal and Reciprocating and Rotary and Piston and Gear etc.
- Mechanical Equipments are Vessels, Ladders, Cages, Platforms, Compressors, Exchangers,
Cooling Towers, Heaters and Boilers.
- Piping layout Engineering and Nozzle arrangements & Orientation.
- Piping Drawings – P&ID, ISO, Pipe Layout, Elevation Drawings, Process Flow Diagrams
- Knowledge of International Codes for ASME B 31.1 & ASME B31.3 and API and BS and IS.
- Calculation on:
- Pipe Shell Thickness Calculation
- Heat and Cold Insulation Thickness Calculation
- Cold Insulation Thickness Calculation
- Net Positive Suction Head Calculation(NPSH)

ADDITIONAL QUALIFICATION
PDS 8.0 and Microstation8.0 Sivabalan Engineering Tamilnadu, India
AutoCAD 2009 & CADPIPE 9.0 United InfoTech Tamilnadu, India
Pro/Engineer 2001 and Ansys Doux Systems Tamilnadu, India
Solid works 2005 and UG NX3 and Master Cam 8.1 Sui Generis Tamilnadu, India
Pro/Engineer Wildfire 3.0 Update from Pro/E 2001 PD Solutions Singapore
Designing Sheetmetal Products using Pro/E Wildfire 3.0 PD Solutions Singapore
Cabling and Hardness Designs using Pro/E Wildfire 3.0 PD Solutions Singapore

EMPLOYMENT

Nov 2009 … Still Date ST Infosys Private Limited,
Jaipur, Rajasthan, India Piping Design Engineer
Jan 2009 … Oct 2009 Sivabalan Engineering & Consultants, Chennai, Tamilnadu, India Piping Designer
Oct 2006 … Dec 2008 MIT Pvt Ltd, Ang Mo kio, Singapore Piping Designer
Jan 2005 … Sep 2006 Sivabalan Engineering & Consultants, Chennai, Tamilnadu, India Piping Designer
Jan 2004 … Dec 2004 Lakshmi Machine Works Ltd, Coimbatore, Tamilnadu, India Apprenticeship Training
Jun 2003 … Dec 2003 Elchomachs India (p) Ltd, Chennai, Tamilnadu, India Draughtsman (Design Support)

PRESENT EMPLOYER:

Company Name : ST Infosys Private Limited, Jaipur, Rajasthan, India.

Position : PDS - Piping Design Engineer.
Software Package : PDS 8.0 and Microstation 8.0 and AutoCAD 2009 and CADPIPE 10.1
About Company : M/S ST Infosys Working on Oil & Gas field for Design Office. Preparing Process P & ID based on Project Engineers' Requirements. Plot Plan development for Production Facilities (Crude Oil Separators, Storage Tanks, Shipping Pumps & Gas Compressors upto Flare System including Pig Launcher & Receiver Area) Preparing Piping Plan based on final P & ID & Plot Plan. Producing Isometric Drawings for Fabrication as per Piping Layout, P & ID & Piping Specification and Responsible for MTO & Requisition. Preparing Pipe Support, Platform Structure Detail Drawings. Also involvement in various types of Civil Foundation Detail drawings. Preparing Piping As-Built Drawings.

PROJECTS HANDLED:
Project Title 1 : ADCOP - Abu Dhabi Crude Oil Pipeline Project - Habshan to Fujairah
Project Client : International Petroleum Investment Company (IPIC).
Project Management : ILF Consulting Engineers
Designation : PDS - Piping Design Engineer.
This is a crude oil on shore pipeline project. It consists of Six Storage tanks associated pumps and Racks etc.
Job Responsibilities:
- Preparation of Equipment Layout and Preparation of piping layout
- Responsible for modelling Equipments in PDS like Crude Oil Separators and Storage Tanks and Pumps and Instruments and Platforms, Vessels, Columns and Physical & logical support etc...
- Preparation of Pipe Routing as per P&ID and Piping GA Drawing
- Extraction of Isometrics and Checking the Bill of Quantities.
- Clash Verification with Structural and Civil Models

Project Title 2 : SHREE MEGA PROJECT – 2 X 150 MW Thermal Power Plant.
Project Client : Shree Cement Ltd.
Project Management : Evonik Energy Services India Pvt Ltd.
Designation : PDS - Piping Design Engineer.
We have prepared the MTO for the entire piping systems for Tendering Purpose based on Client’s Preliminary Equipment Layout Drawings, Pipe List with PDS Piping Modeling, Valve List, and Piping Components List etc.
Job Responsibilities:
- Preparation of Plant GA, Floor Plan, Elevation Drawing. Preparation of piping layout and Equipment Layout.
- Responsible for modelling Equipments in PDS like Circulating Fluidized Bed Combustion Boiler and Fuel Bunker,
Combustor, Water Cooled Cyclone and Steam Cooled Cyclone Outlet Chamber, Re Heater, Super Heater and
Economizer, Tubular Air Heater, Steam Cooled Wall Convective Back Pass, Stream Drum, Chimney and ESP
And ID, SA, PA Fan and Fuel Handling System and Dust Collecting System, TG Building Equipments and
DM Water Plant and Steam Condensate Air Cooled System and LP and HP Heat Exchanger, Air Compressor
And Pumps and Instruments and Platforms, Vessels, Columns and Physical & logical support etc...
- Preparation of Pipe Routing as per P&ID and Piping GA Drawing
- Extraction of Isometrics and Checking the Bill of Quantities.
- Clash Verification with Structural and Civil Models.
PREVIOUS EMPLOYER:

Company Name : Sivabalan Engineering, Chennai, Tamilnadu, India.

Position : Piping Designer.
Software Package : PDS 8.0 and Microstation 8.0 and AutoCAD 2008.
Responsibility:
- Conceptualization and 3D Modeling of Equipments and Piping System in PDS Various Projects.
- Preparation of Equipment Layout, Piping Layout & Nozzle Orientation for above mentioned areas.
- Preparation of PFD and GAD’s and Piping and Instrumentation Drawings.
- Preparation of required Pipe List and Piping Component List and Valve List and Pump List.
- Extraction of Isometrics Drawings and Checking the Bill of Quantities and Bulk MTO Generation.
- Clash Verification with Structural and Civil Model for the piping system.

PROJECTS HANDLED:
Project 1 : 58 MW Natural gas based power plant, India.
Designation : Piping Designer
We have provided Engineering Services for 58 MW Natural Gas based Power Project with 38 MW Natural Gas Turbine and 20 MW Steam Turbine. We have modeled the entire piping of this project in PDS Version 8.0 and ISO Drawing Extraction and MTO Generation was done. High Pressure Steam pipe Lines and Gas Pipe Lines.
Job Responsibilities:
- Preparation of Piping Layout in 2 D
- Responsible for modelling Equipments in PDS like Tanks, Instrument
- Platforms, Vessels, columns etc.
- Preparation of Pipe Routing as per P&ID and Piping GA Drawing
- Extraction of Isometrics and Checking the Bill of Quantities.
- Clash Verification with Structural and Civil Models

Project 2 : 10000 psi De Sander, SA Refinery Project.
Designation : Piping Designer
When Crude Oil is produced sand and other silt also will come along with that. De-Sander is used to remove sand and other unwanted materials from crude oil. The associated Piping and Valve system was modeled in PDS. This Vessel was designed by us per ASME Section VIII Division 2 by our Mechanical Design Dept.,
Job Responsibilities:
- Routing piping as per the comments received from the clients.
- Modeling of physical & logical support.
- Clash detection of 3D model using PDS – Interference Manager.
- Preparation of ISO Drawings with MTO
DECLARATION

I consider myself familiar with Mechanical Engineering and Piping aspects. I am also confident of my ability
To work in a team .I hereby declare that the information furnished above is true to the best of my knowledge.
Thanking you
Yours Faithfully
(M. Poomariappan.)

[Guest]

Career objective :
To work for an organization where my skills and knowledge are fully utilized for its growth.
Exposure :
More than 2 years experience in Project Management Office. Sufficient knowledge and experience in Planning, Scheduling, Resource Allocation, Tracking and Monitoring variance(project and Budget) by using Microsoft Project.
Professional Experience
1. Job Experience :
Working as Technical Assistant in Oxford Engineering College, Trichy - 9 .

Position : Technical Assistant
Duration : Feb- 2009 to Till Now.
NATURE OF WORK
- Handling VLSI LAB
- Communication LAB
- Microprocessor and Microcontroller LAB
- Linear Integrated Circuits LAB
- Electronics System Design LAB
2. Job Experience :
Schedule Coordinator (FEB 2007 – DEC 2008), Project Management Office, DSM Soft, Trichy.
M/s DSM Soft private limited is the One of the leading in Engineering Data Services and Geo Spatial Services for more than a decade and it is concerned with manpower of more than 1000 and involved in CAD, GIS and Micro station Projects. Their current projects are carried out European Countries, US, Australia, India and etc… The job involves complete Planning, scheduling, Resource allocating and costing.
DSM Soft Private Limited, Trichy.
NATURE OF WORK
Project Management Office :
- Roles and responsibilities :
- Prepared Project Plan including schedules, communication plan, resource plan, risk management plan
- Tracked schedule variance using MS Project and circulated schedule variance report on daily basis. Raised alerts on schedule variance.
- Worked on trend based schedule tracking for large projects.
- Assisted Program Manager and Project Manager in change management.
- Performed Resource Tracking by extracting online data from milkyway application. Provided weekly reports on manpower utilization to the Program Manager.
- Regularly updated the Project Plan.
- Handled work for large multiple projects simultaneously.
- Prepared presentations for Management Review Meetings.
- Projects Handled
- SNH - Bewag, Berlin City, Germany.
- GeoScience Australia, Australia Government, Australia.
- EDF Energy Systems, France.
- Reliance Infocom, Mumbai, India.
- EnBW Asset Capturing and EnBW Method II and Method I, England.
- Ordnance Survey of Ireland (Photarc), Ireland.
3. Job Experience : M/s DSM Soft Private Limited – Trichy.
Trichy – 620 001, Tamil Nadu, India.

Position : CAD Engineer
Duration : Sep 2006 to Jan 2006.
NATURE OF WORK
- Digitised raster maps into vectorised geospatial data using AutoCAD, Microstation, Arc GIS Software
- Done quality checking on digitized files.
- Suggested process improvements to reduce manhours.
- Projects Handled
- SNH - Bewag, Berlin City, Germany.
- Reliance Infocom, Mumbai, India.
EnBW Asset Capturing and EnBW Method II and Method I, Germany.
4. Job Experience : CADD CENTRE
Trichy – 620 001, TamilNadu, India.
Position : Senior Faculty.
Duration : Jan 2006 to Sep 2006
Software Used : AutoCAD 2000, 2004, 2006
Microsoft Project 2000, 2003
NATURE OF WORK
- Trained over 100 students & professionals on AutoCAD and MS Project.
- Trained newly recruited trainers on AutoCAD & MS Project.
EDUCATIONAL QUALIFICATIONS
- Doing Part-Time B.E (V – Semester) in Electronic and Communication Engineering at Anna University, Trichy.
- Diploma in Electrical and Electronics Engineering by Department of Technical Education at Sashasayee Institute of Technology (SIT), Trichy – 620 010.
Percentage of marks : 90 % (First Class with Honours).
Year of Passing : April 2005.
Project Work : linear Motor using conveyor
- HSC in St.Joseph Hr. Sec. School, Trichy.
Percentage of marks : 83 % (First Class with Honours)
Year of Passing : April 2002.
- SSLC in Holy Cross High School, Trichy.
Percentage of marks : 91 % (First Class with Honours)
Year of Passing : April 2000.
COMPUTER EXPOSURE
Software : AutoCAD 2000 to 2006,
Microsoft Project 2000 to 2007.
: MS-office, Windows Xp Professional

[stsundhar]

CURRICULUM VITAE
SUNDHAR RAJAN.S.T,

Email :sundharst AT gmail.com
Professional Objective :
Looking for a challenging and demanding position in piping design and engineering in a growth oriented mechanical consulting, contracting, construction organization to render professional skills and add value to organizational growth and objectives
Keywords : AUTOCAD, PDMS, CAESAR - PIPING
.
Software skills :
- Piping Drafting Auto CAD 2011 (Autodesk certified)
- 3D modeling PDMS
- Engineering Analysis CAESAR II

Knowledge of
- PFD and P&ID
- Equipment and piping layouts
- Process plant layout
- Piping Routing
- Piping isometrics
EDUCATIONAL QUALIFICATION :
Qualification Institution Year of Study Marks/CGPA
Diploma in D.M.E (Diploma in Mechanical Engineering) Chamber of commerce Manali Ramakrishna Polytechnic College,
Thanjavure, Tamilnadu. April 2005 59.00%
S.S.L.C
(10-th Std.) Don Bosco Higher Sec School, Vellore,
Tamilnadu. April 2002 63.00%
ORGANISATIONAL EXPERIENCE :
- KIML Oct 2009 to May 2011
Designation : AutoCAD Draughtsman

Nature of job :
- Designing and developing wiring harness for Hyundai Motor cars.
- Preparing Process Sheet for wiring specifications.
- Preparing the Actual Part list for the Wiring harness.
- Preparing the Quotation for the products to the customers.
- Increasing the production by applying new methods and changing the process flow.
- Working in EDP (E-BIZ) environment for Data storage and manipulation for all the products.
- Working in AUTO-CAD environment for Engg-design, storage and Updating design changes for all the products.
Responsibility :
- Analyzing the customer drawing and rooting the path of the Wire Harness.
- Preparing the quotation for the harness produced by the concern.
- Solving the fitment problem at the customer end.
- Updating the changes to meet the customer request as their need.
- Fully responsible for the changes of the product by the customer and to implement in the product.
- JAS TRANCECORE Nov 2007 to Sep 2009

Designation : Supervisor and CAD Draftsman
Responsibilities :
- CRGO (Cold-rolled Grain Oriented Steel) transformer core lamination work.
- Purchase the raw materials from Japan.
- Allocate the materials for production.
- Plan and schedule the jobs.
- Schedule the work to workers to cut sheets as per the specification.
- Complete the product as per specification within the period of time.
- Check the quality of final product on every aspect.
- Maintained and kept record of all parts and equipment utilized.

CAD Draftsman :
- Core design in AUTOCAD.
- Modification in client drawing
- Drawing or CAD Corrections
.
- JV INDUSTRIES July 2006 to Oct 2007
Designation : Supervisor
Responsibilities :
- Receive the raw materials (Aluminum & Copper rolls) from customers.
- Allocate the materials for production.
- Plan and schedule the jobs.
- Schedule the work to workers.
- Complete the product as per specification within the period of time.
- Check the quality of final product on every aspect.
- Superior budget analysis and planning.