APTS INSPECTION SERVICES Sharjah Dubai : NDT RadioGrapher, UltraSonic Technician, Welding Inspector :

[Admin]

As a leading and growing NDT and Inspection company APTS is interested in receiving job applications from qualified engineers, inspectors, supervisors, and technicians who wish to put their knowledge and experience to good effect.

The following listing details some of the categories of personnel APTS requires from time to time.

[LIST][*]Senior Radiographer / Interpreter[*] Radiographer[*] Ultrasonic Technician[*] Multi-disciplined Technician (RT/MT/PT/UT)[*] Welding Inspector[*] Plant And Equipment Inspector[*] Pressure Vessel Inspector[*] Rotating Equipment Inspector[*] Painting/Coating Inspector[*] Electrical Inspector[*] Vendor Inspector/Expeditor[*] ASNT NDT Level III[/LIST]
ou are interested in being considered for employment please forward a neatly typed C.V. to aptsins@eim.ae. Your C.V. should include details of your qualifications, career progression, work experience and any relevant specialist knowledge. Copies of your qualifications or certificates should accompany your C.V.

SENIOR RADIOGRAPHER / INTERPRETER
Duties include the supervision of other NDT Technicians and the performance of film interpretation to client and industry standards. Will be required to undertake any other NDT work as necessary.

Must successfully qualify by examination to Level II in film interpretation including written general and specific papers and a practical examination. These qualifications are renewable every three years.

RADIOGRAPHER
Duties include: Industrial radiography (Gamma), magnetic particle testing, dye penetrant testing and ultrasonic thickness measurement (using "D" meter or equivalent).
Must be fully conversant with Non-destructive Testing techniques, procedures, standards and industry codes (e.g. API-1104, ANSI B31.3, and AWS D1.1).

ULTRASONIC TECHNICIAN Duties include: Ultrasonic flaw detection and thickness measurement, magnetic particle and dye penetrant testing.
Must be fully conversant with inspection procedures, standards and industry codes (e.g. API-1104, ANSI B31-3, AWS D1.1, API-RP-)

MULTI - TECHNICIAN (RT/UT / MT / PT)
[LIST][*]Qualified to ASNT Level II in RT, MT, PT, and UT[*] Must have knowledge of ASME Sec. V, API 1104, ANSI B-31, AWS D1-1.[*] Fully conversant with API 650, ASME Sec. VIII & ASME Sec. V[*] With Working Experience of at least 3 years in flaw detection.[*] Familiar withUSM-35, USL-32, USK-6 OR USK-7 (KRAUTKRAMER).[*] English Comprehension necessary.[*] Capability of driving a vehicle is a plus factor. (Pick-up or sedan)[/LIST]
WELDING INSPECTOR Must have the training, education and experience required to qualify as an American Welding Society-Certified Welding Inspector (AWS-CWI), or equivalent.
Must be competent in film interpretation with a thorough knowledge of industry codes such as: AWS D1.1, API 620 or 650, ANSI B31.4 or B31.8, ASME section V & IX or equivalent standards.
A minimum of 5 years industrial experience is required including at least 6 years experience in Welding Inspection.

PLANT AND EQUIPMENT INSPECTOR Must have the training, education and experience required to meet the requirements of the National Board of Boiler and Pressure Vessel Inspectors, or equivalent.
Must be competent in film interpretation with a thorough knowledge of industry codes such ANSI B31.3 or equivalent standards.
A minimum of 12 years industrial experience is required including at least 6 years experience in Plant & Equipment Inspection.

PRESSURE VESSEL INSPECTOR Must have background experience or thorough knowledge of fabrication or manufacturing of Coded Pressure Vessel, Columns and Heat Exchanger Units. With a minimum of five (5) years experience (continuous). Preferably having an active Mechanical Engineering background or have been a Welder by previous experience and has related developed skills in the discipline.

Has full knowledge of the inspection requirements of static equipments per ASME Section VIII, TEMA from material preparation, and fit-up assembly to full welding. Can read and interprets fabrication working drawings.
Has complete familiarization and working knowledge of Industry Codes and Standards. Has knowledge of materials specification per code.
Must have a valid up to date AWS-CWI or CSWIP Certificates.

ROTATING EQUIPMENT INSPECTOR Must have background experience or thorough knowledge of assembling and dynamic testing of rotating equipments, that is, Centrifugal, single and stages Pumps; Fans and Centrifugal Blower; Hermetic type Air Compressor units and related other rotating equipments.

Understands and has full working knowledge in methods and specification of installation, alignment, dynamic performance testing and operations check.

Preferably having an active Mechanical Engineering background or have been a Journeyman and has related developed skills in the discipline. With a minimum of five (5) years experience (continuous).

PAINTING/COATING INSPECTOR Must have background experience or thorough working knowledge and ability of all phases and types of Coating and Painting application and methods and recognized industry standards. Preferably experienced in protective coating and painting of Refinery/Plant static equipments such as, Coded Pressure Vessel, Columns and Heat Exchanger Units, Storage Tanks and Fabricated Spools and Stand Pipes. With a minimum of five (5) years experience (continuous), and has related developed skills in the discipline.
As minimum qualification, must have a valid up to date BGAS-CSWIP, Grade 2-Painting Certificates.

ELECTRICAL INSPECTOR Must meet the qualification requirements of a journeyman electrician, or equivalent.
Must demonstrate a thorough working knowledge of codes such as The National Electrical Code / NFPA 70, or equivalent standards.
A minimum of 12 years industrial experience is required including at least 6 years experience in Electrical Inspection.

VENDOR INSPECTOR/EXPEDITOR Must be a High School graduate with Technical College training (2 years) or equivalent and with 8 years experience. Alternatively a High School graduate with 13 years experience in quality control and quality assurance.
Must demonstrate a through knowledge of national codes and fabrication methods. Shall perform specialized inspection and testing of petrochemical processing equipment and materials, plants surveys and audits to verify vendor compliance with purchase orders and engineering standards.
A minimum of 6 years experience in Vendor Inspection is required.

ASNT NDT LEVEL III Must have current Level III certification issued by ASNT or equivalent in one or more methods i.e. UT, MT. PT, RT, ET etc.
Must be capable of fulfilling the full scope of a practicing Level III including, but not limited to: method application, interpretation of results, interpretation of national codes and standards, preparation of procedures, training of Level I and Level II personnel, etc.
A minimum of 12 years industrial experience is required including at least 6 years experience in the particular methods.

Job Apply
SHARJAH OFFICE:
POST BOX: 150273,
E-mail: apts@emirates.net.ae

DUBAI OFFICE:
POST BOX: 89469,
E-mail: aptsins@eim.ae

INDIA:
QTECH INSTITUTE OF NONDESTRUCTIVE TESTING & WELDING TECHNOLOGY
NO.97, SUBRAMANIYA SWAMY KOIL STREET,
SAIDAPET, CHENNAI - 600 015.
E-mail: qtech@india.com

CONTACT PERSON:
E.SATHYA SRINIVASAN / ASNT LEVEL - III

http://www.aptsinspection.com

[Guest Poster]

RESUME
AJAY DIMRI
email : dimri4 AT rediffmail.com
dimri40 AT yahoo.com

Personal Details :
Name : Ajay Dimri
Date of birth : 14 FAB, 1969
Marital status : Married
Languages Known : Hindi and English
Experience : 16 years+

Career objective :
To produce best results using minimum of resources and a zeal to be part of the best team at work with a motto of achieving highest in the field.

Educational Qualification : BSc.

Additional Qualification : ASNT Level-III (UT,RT,MT,PT)

Examination Institute Year of passing Percentage :
Radiography Testing BARC March-1997 85.8% Mumbai

Computer Skill :
Knowledge of Microsoft Word, Microsoft Excel

Work Experience :
M/S Indian sugar and general engineering corporation (ISGEC),Haryana.
ISGEC is the Heaviest Engineering Company in North India, accredited by the ISO-9001, engaged in Manufacturing of ASME Coded Pressure Vessels, Industrial Boilers for Paper Mills, Sugar Mills & High Pressure Boilers for Thermal Power stations, Horton Spheres & Storage Bullets for L.P.G. bottling Plants, Variety of Heat Exchangers ( Stainless Steel, Carbon Steels & Low Alloy Steel ) for Petro Refinery, Gas containers for Transportation of Liquid Chlorine, Hydraulic & Mechanical Pressess for Auto Industries & other jobbing Industries.
ISGEC manfactured Pressure Vessels having Wall thickness upto 200 mm (8 inches) bearing weight upto 200 tonnes in: Clad, Alloy, Carbon & Stainless Steels Materials. The company has been accredited by U, U2, S & R stamps as well.

PROJECTS EXECUTED IN ISGEC :-
- SNC – Lavalin, France.
- Burrup Fertilizer Pty Ltd. Western Australia.
- Daelim Industrial Co.Ltd. Korea.
- Sumitomo Heavy Industries Ltd, Japan.
- Snamprogetti S.P. ITALY.
- Bharat Petroleum Corporation Ltd. Mumbai.
- Reliance Industrial Ltd. Jamnagar.India.
- Indian Oil Corporation Ltd. Panipat.India.
- Channai Petroleum Corporation Ltd. Channai. India.

- Position Held : Sr. officer (NDT).
- Dept : Quality Assurance
- Duration : Jun 2005 to till date
Job Profile Planning,Co-ordination and Execution of ndt
Larsen & Toubro Limited, Hazira. DIST-SURAT ( GAJARAT )
L & T's Heavy Engineering Division designs, manufactures & supplies precision custom engineered critical static hi-tech equipment & systems such as Reactors, Pressure Vessels, High Pressure - High Temperature Heat Exchangers to the Process Plant industries worldwide including Oil & Gas Refinery, Cracker, Petrochemicals, Fertilizer, Nuclear power etc. It also supplies Key Coal Gasification equipment including Coal Gasifiers & Syngas Coolers for Coal Gasification Plants. An ASME S, U,U2,U3 & N Stamp authorise, With German standard AD 2000- Merkblatt authorize, National certificate R-Stamp., ISO-9001: 2000, ISO-14001, OHSAS-18001, working with Japanese Work Management System (5S).

- Position Held : QA/QC Officer (NDT).
- Dept : Quality Assurance
- Duration AUG 2004 to JUN 2005
Job Profile :
- Planning,Co-ordination and Execution of A-Scan Ultrasonic examination of weld of different joint configuration () and raw material in accordance with Various International Codes & Standards like ASME, PD 5500, AD-2000 Merkblatt, RCC MR- PFBR.
- Development and implementation of different UT technique to meet the customer requirement.
- Calibration of NDT Instruments and maintaining record
- Making UT Procedures as per ASME Specification., PD 5500 ,Austalian Standard , AD-2000 Merkblatt, Customer Specification
- Interacting with third party inspection such as AI, Llyods, FW,BVIS,TUV,NPC,BHAVINI, IGCAR etc.
- Usage of various Digital Ultrasonic Testing m/c of various make like KrautKramer(USM 35, USM 25,USD 15X),Karl Deutsh. Modsonic ,ISONIC Machine ( B & C scan ) with recording ( as per Code Case 2235)

M/S Indian sugar and general engineering corporation (ISGEC),Haryana.
ISGEC is the Heaviest Engineering Company in North India, accredited by the ISO-9001, engaged in Manufacturing of ASME Coded Pressure Vessels, Industrial Boilers for Paper Mills, Sugar Mills & High Pressure Boilers for Thermal Power stations, Horton Spheres & Storage Bullets for L.P.G. bottling Plants, Variety of Heat Exchangers ( Stainless Steel, Carbon Steels & Low Alloy Steel ) for Petro Refinery, Gas containers for Transportation of Liquid Chlorine, Hydraulic & Mechanical Pressess for Auto Industries & other jobbing Industries.
ISGEC manfactured Pressure Vessels having Wall thickness upto 200 mm (8 inches) bearing weight upto 200 tonnes in: Clad, Alloy, Carbon & Stainless Steels Materials. The company has been accredited by U, U2, S & R stamps as well.
PROJECTS EXECUTED IN ISGEC :-
- SNC – Lavalin, France.
- Burrup Fertilizer Pty Ltd. Western Australia.
- Daelim Industrial Co.Ltd. Korea.
- Sumitomo Heavy Industries Ltd, Japan.
- Snamprogetti S.P. ITALY.
- Bharat Petroleum Corporation Ltd. Mumbai.
- Reliance Industrial Ltd. Jamnagar.India.
- Indian Oil Corporation Ltd. Panipat.India.
- Channai Petroleum Corporation Ltd. Channai. India.

- Position Held : Officer (NDT).
- Dept : Quality Assurance
- Duration : Jun 1996 to Jun 2005
Job Profile Planning,Co-ordination and Execution of ndt
- Planning,Co-ordination and Execution of A-Scan Ultrasonic examination of weld of different joint configuration and raw material in accordance with Various International Codes & Standards like ASME, PD 5500, AD-2000 Merkblatt, RCC MR- PFBR.
- Development and implementation of different UT technique to meet the customer requirement.
- Calibration of NDT Instruments and maintaining record
- Interacting with third party inspection such as AI, Llyods, FW,BVIS,TUV etc.
Usage of various Digital Ultrasonic Testing m/c of various make like KrautKramer(USM 35, USM 25,USD 15X),Karl Deutsh. Modsonic ,
M/S NDT SERVICE AHMADABAD
- Position Held : Site In- Charge (NDT)
- Dept : Quality Control
- Duration : MAR 1994 TO JUN1996
Job Profile
- Caring out UT,RT AND MT.

Yours Faithfully
AJAY DIMRI

[Guest]

Dear Sir/Madam

My aim is to Work with ownership and commitment for professional growth as coating Inspector with Reputed Consultants in Oil & Gas Sector and contributing through my technical skills in both upstream/downstream industry and make use of all future learning opportunities.

My skills, experience and qualifications are ideally suited for the job.

Please go through my CV and revert back if your requirements match my skills.

Looking forward to a positive reply from your side.
TM Krishnakumar

[Guest]

CURRICULAM VITAE
Name : Abdullah Nisar Shaikh
E-mail : shaikh205 AT gmail.com

My Objective :
To enhance my skills and personal developments that will share my knowledge and be able contribute to the growth of the company. Looking for a position in a dynamic and growing organization. Where I can effectively utilize my skill and ability.

Technical Qualifications :
- U.T. (Ultrasonic Testing) Of TKY WELDS Certificate No. :UT-II/10/TKY/04
- U.T. (Ultrasonic Testing) LEVEL 2 Certificate No. :UT/II/37708
- U.T. (Ultrasonic Testing) LEVEL 1 Certificate No. :UT/I/37708
[b][u]- M.P.T. (Magnetic Particle Testing) LEVEL 2 Certificate No. :MPT/II/37708
- L.P.T. (Liquid Penetrant Testing) LEVEL 2 Certificate No.:LPT/II/37708
STCW -95.
- ELEMENTARY FIRST AID
CERTIFICATE NO. EFA/12634
- FIRE PREVENTION & FIRE FIGHTING
CERTIFICATE NO. FPFF/14396
- PERSONAL SAFETY & SOCAIAL RESPONSIBILITY
CERTIFICATE NO. PSSR/12314
- PERSONAL SURVIVAL TECHNIQUES
CERTIFICATE NO. PST/11911

Educational Qualifications :
Appeared for Diploma in Mechanical Engg. from National College, Palghar.
Secondary School passed from Cosmos Educational Institute Sharjah.

Computer knowledge :
Packages known : MS –Office Standard (Word, Excel, PowerPoint etc)
Typing speed 30-35 wmp
AUTO CAD (Basic)
Computer Fundamentals
MS -Windows2000, ME, XP).

Work Experience. :
- Worked as an assistant NDT technician in METALLURGICAL LABORATORIES PVT. LTD.(Mumbai).
- Worked as an assistant UTM operator in VIGIL MARINE SERVICES (Pvt) Ltd. (MUMBAI). From 17/11/08 to 22/10/09
- Worked as a Customer Care executive in a leading in (Sharjah).
- Worked as a customer care representative in Carrefour Sharjah for 1 month.
- Worked as a storekeeper in an Internet café for 3 months in (Sharjah).
- Worked as a computer operator and as a storekeeper in a leading mobile shop in (Sharjah). With better experience in convincing the consumers.
JOB PROFILE. :
- Can do inspection of various objects like Welds, Plates, Bars etc through different Techniques like UT, LPT, MPT.
- Have done 5th special survey of M.V.Samundrika-15 under IRS classification.
- Have done 5th special survey of M.V.Neel Kamal under DNV & IRS classification.
- Have done 5th special survey of M.V.Feroze Gandhi under IRS classification.
- Familiarize with Ship Structures of vessels like BULK CARRIER, LPG
CARRIER, OIL TANKER, ORE CARRIER & OSV (OFFSHORE SUPPLY VESSEL).
- Familiarize with DNV, LRS, GL, ABS, IRS, RINA AND NKK TM Software.

Personal profile :
Name : Abdullah Nisar Shaikh
Date of birth : 07/08/1989
Place of Birth : Mumbai
Sex : Male
Marital status : Single
Nationality : Indian
Religion : Islam
Languages Known : Hindi, English and Arabic.

[Guest]

Dear Sir,
I am currently working in a National Petroleum Construction Company
As a Production QC(Welding)
I am proud to say that I have the courage and capability to
do any challenging work. I assure you that I will work hard for the
improvement of your company. Furthermore, I work well other.
I shall be pleased to provide any further information you
may need I can be contacted at e-mail
chellakamatchi222 AT gmail.com I hope to hear good reply from you soon.

[Guest]

NISHANTH.V.S
E-Mail : nishanthvijayan10 AT gmail.com

OBJECTIVE :
To obtain a respectable position in your organization which will enable me to use my talent, creativity and ability to the maximum and contribute to the growth of organization as well as myself.

DYNAMIC QUALIFICATION : Hard working & Energetic Punctual, Efficient & Well Managed Adaptive, Compatible & Flexible Good Mathematical & Analytical Attitude.

ACADEMIC QUALIFICATION :
S.S.L.C. From department of General Education, Kerala state Board.
+2 Science H.S.C. From Board of H.S.C.

COMPUTER KNOWLEDGE : Auto cad, MS office, DTP

TECHNICAL QUALIFICATION : : NDT Level II as per ASNT SNT TC 1A in UT ,PT, MT & RT.

WORK EXPERIENCE :
Working with Industrial X-ray & Allied
Radiographer (I) Pvt. Ltd. from July
2006 to June 2010 Ndt Technician
Working with Interface Technical Inspection, Dubai, UAE from October 2010 to October 2011.

MECHANICAL COMPANIES IN INDIA : Larsen & Turbo, Ranoli works, Vadodara
Mangala Processing Terminal, Rajasthan
Vijay Tank and Vessels, Sakkardha, Vadodara
Bina Oil Refinery, Madhya Pradesh
Gujarat State Fertilizers Corporation, Vadodara
Thermex , Savli, Vadodara.
Jord Engineering, Anand, Ahmadabad.
IOCL, Gujarat Refinery, Vadodara.
IOCL, Naphtha Cracker Plant,Panipat,Haryana.
Oil and Natural Gas Corparation, Vadodara.
Gujarat Narmada Valley Fertilizers Corparation, Baruch
Rhine Engineering, Por, Vadodara.
Alstom, Makkarpura, Vadodara.
Newton Engineering, Makkarpura, Vadodara.
` Bhagavathi Auto Cast, Bawla, Ahmadabad.

PIPELINE PROJECT IN INDIA : Barmeer - Salaya Pipeline Project (BSPL)
Morbi – Dhuva Pipeline Project (MDPL)
MECHANICAL COMPANIES IN UAE : Dubai Electricity And Water Authority (DEWA)
Fujairah Power Plant Phase II
Fujairah Refainary (FRCL)
Maritime Industrial Services ( MIS)
ADNOC Ruwais
Al Shirawi (ASECO) Al Ouoz
Aswan DIP Jabel Ali
Sigma engginering Jabel Ali Fze
Ferrofab Jabel Ali Fze Fze
Proserv Jabel Ali Fze
Specialist Services Jabel Ali Fze

JOB PROFILE : Carry out Radiographic Examination
Carry out Magnetic Examination
Carry out Penetrant Examination

EQUIPMENT HANDLED :
RT : Ir192 (spec2T, Tech - ops, Delta)
Se75 (Delta), Co-60 (Gammat-TK100, Amertest-680).
X-ray (Andrex, Dandong-china)
PT : Penetrant (magnaflux SKL-SP1),
Cleaner (magnaflux SKC-1) Developer
(magnaflux SKD-S2).
MT : HWDC Electromagnetic Yokes
( magnaflux Y-7 Yoke) Ferrochem make magnafl ux Red 14 6-A (kerosene base )
magnaflux make 7c-black/29-1 Red
(Water base) magnetic field indicator.

PRACTISED CODES & STANDARD :
RT ASME Sec-I, ASME Sec-II, ASME Sec- III,
ASME Sec IV, ASME Sec VIII,
ASME B31.3, API 1104,
ASME Sec-V Article 2
T 231 Film
T 271 Radiographic technique
T274 Geometric Unsharpness
T275 Location Marker T 276 IQI Selections
T 277 placement of IQI
T281 Quality of Radiographs
T282 Radiographic Density
T283 IQI Sensitivity
T284 Excessive Backscatter
DIN 54111 German Standards
BS EN 444 classification of
Radiographic techniques
BS EN 1435 Radiographic testing of Weld Joints.
BS EN 462-1, Image quality Indicator
BS EN 462-2, IQI value
BS EN 462-4, IQI Selection

MT : ASME Sec v Article-7 magnetic particle Examination
PT : ASME Sec v Article-6 Liquid penetrate Examination.

[Guest]

Dear Sir/Mrs,
My name Ronald,and i'm want to apply for a Welding / Piping QC Inspector at your company.This is my Summary for as minimum reference and thanks for your attention and looking forward hear from you soon.
Best Regards,
Ronald.S,S
sinurat_m04 AT yahoo.com
Executive Summary
QA/QC Coordinator
PT.Bakrie Power
September 2011 – Present (7 months) Jakarta - Indonesia
3 x 18 MW Coal Fired Steam Power Plant Project PT.Kaltim Prima Coal (KPC) Sangatta-East Kalimantan-Indonesia.
Consultant : Fichtner Consulting Engineers (India) Private Limited
Manufacture : Bharat Heavy Electricals Limited (BHEL)
Welding Inspector
PT.Surya Besindo Sakti
June 2011 – August 2011 (3 months) Cikande-Indonesia
Fabrication of Scrubber : 1 Unit & Separators: 1 Unit,
Project PT Pertamina Geothermal Energy : Production Facilities & Re-injection Unit IV Fluid Geothermal 20 MW at Lahedong,North Sulawesi-Indonesia.
RONALD has 1 recommendation (1 co-worker) including :
1st Hieng Kurnia, Welding Inspector, PT. Surya Besindo Sakti
QA/QC Coordinator
PT.Kelsri
Privately Held; 51-200 employees; Construction industry
January 2011 – May 2011 (5 months) East Kalimantan-Indonesia
Project PT.Pupuk Kalimantan Timur (PKT) : Above Ground Piping at 3 x 220 MW Coal Fired Steam Power Plant Project
QA/QC Coordinator
PT.Kelsri
Privately Held; 51-200 employees; Construction industry
July 2009 – December 2010 (1 year 6 months) South Kalimantan - Indonesia
South Kalimantan-Indonesia :
Project PT.Meratus Jaya Iron Steel : 315,000 TPY Direct Reduction Rotary Kiln Plant South Kalimantan
RONALD has 1 recommendation (1 client) including :
1st Maimun Abdul Jalil
Welding Inspector
PT.Timas Suplindo
May 2009 – December 2009 (8 months) East Java-Indonesia
Welding Inspector
Project PT.PLN : 2 x 315 MW Coal Fired Steam Power Plant Project
Welding Inspector
PT.Surya Besindo Sakti
July 2008 – May 2009 (11 months) Cikande-Indonesia
Fabrication of Regeneration Gas Heater, Fire Water Pump Starting Air Vessel, Structure Module & Cooling Water System, Discharge Cooler, Fuel Gas Start Up Heaters, Instrument Air Receiver, Meg Iso Tank & Seal Gas Heater,Pressure Vessel.

[Guest]

CURRICULUM VITAE
SARATH KUMAR. S
Email : s.sarath850 AT gmail.com

EDUCATIONAL ATTAINMENT
Academic : : Bachelor of Science
(PHYSICS)
Professional : : ASNT Level- II RT
ASNT Level- II UT
ASNT Level- II MT
ASNT Level- II PT
Computer literacy : PGDCA, MS OFFICE

Special Training : Training Course on UT,
Conducted by NDT Technology (P) LTD,
Kottayam, Kerala
SUMMARY OF EXPERIENCE :
Have experience in Non-Destructive testing methods of RT, UT, MT & PT in the field of fabrication and construction industries such as REFINERY, CHEMICAL, FERTILIZER AND PETROCHEMICAL PLANTS.
DETAILED WORK EXPERIENCE :
:- WENS Quality Assurance Pvt. Ltd., Chennai – 57.(2008-2010)
Position Held : NDT Trainee / NDT Technician
Performed by NDT Technician RT/LPT/MPT/UT. & Film Interruption and Darkroom Technician.
Client :- Many fabrication company in Chennai.
NTS Yemen ( 2012 –at present)
Position Held :NDT Technician
Declaration
I hereby declare that the above information is true to the best of my knowledge and belief.
Yours faithfully
SARATHKUMAR.S.

[Guest]

RAJEEV MENON
rajeevrmenon AT yahoo.com

PAINTING/COATING INSPECTOR :
Offering 21 years of sterling experience in painting/coating & seeking Quality control/supervision assignments across oil & Gas, Petrochemical industries

EXECUTIVE SUMMARY :
- Qualified Paint technologist & NACE COATING Inspector Level-2 ,with vast exposure across Painting, Coating, Lining, Powder coating Inspection, supervision and Documentation, and quality control; currently successful association with LAMPRELL ENERGY ltd –( U.K ) as a PAINTING/COATING INSPECTOR
- Experienced in Conducting stage wide Coating/Painting quality checks, carrying out Paint Qualification Tests, Procedure /Applicator Qualification Test, Preparing blasting /Painting procedure, Method Statement, Coating repair procedures and Inspection Test Plan
- Conversant with Inspection of Coating/Painting,Lining of Piping, Pipelines, Heavy Structural, Pressure vessels, Column, Tanks, offshore exploration ( Jack up oil rigs) at fabrication shops & various construction sites.
- Effective resource planning/ optimization, focusing on waste reduction, enhancing productivity and profitability. Inbuilt ability to use sound judgment, decision-making skills & effectively perform in a self-directed environment.

Technical Skills :
Testing tools : Dry film /wet film thickness
Curing test
Surface profile Check
Salt/conductivity test
Adhesion test
High/low voltage Holiday/pinhole test
Peel off test
Barcol Hardness test

Coating product expertise :
Fully conversant with a diversified range of Coating, Paints and specialized Coating such as Spray applied
Coating , Reinforced lining , Thermal spray application , Plural Component Spray, Inorganic zinc, Phenolic
Silicone, Polyurethane, Vinyl ester, Polyester , Epoxies, Shrink sleeves Coatings, 100 % Solid coatings Underground bituminous and tape wrapping

PROFESSIONAL EXPERIENCE :
Lamprell Energy ltd U.A.E July 25 , to Till date
Consolidated Contractor International Company.(Qatar,Oman,Kazakhstan) Feb 2001 , to June 2009 (C.C.I.C)
AL-Suwaidi Construction Co. (Saudi Arabia) Feb 1995 , to August 2000
Steelage Industries Ltd ( Mumbai – India) Nov ,1990 to Jan 1995

Key Projects Handled :
CLIENT : M/S. PETROFAC (QATAR PETROLEUM )-GAS SWEETENING FACILITIES PROJECT)
JOB TITLE : Fabrication, Painting/lining of 97 Nos of Pressure Vessels including Column, Filters
ROLE PAINTING/COATING INSPECTOR
CLIENT : M/S.TECHNIP & PROSERNET (GASCO –IGD HABSHAN-5 PROCESS PLANT)-U.A.E
JOB TITLE : Fabrication, Coating/Lining of 10 no of vessel (Thermal spray application)
ROLE PAINTING/COATING INSPECTOR
CLIENT : M/S.WORLEY PARSON( PETROLEUM DEVELOPMENT OMAN-)Amal Steam surface facilities
JOB TITLE : Fabrication ,Coating/lining supply of 7 nos of pressure Vessel ,K.O Drum & Scrubber
ROLE PAINTING/COATING INSPECTOR
CLIENT : M/S. LEIGHTON OFFSHORE(Iraq Crude Oil Expansion Project)- U.A.E
JOB TITLE : Fabrication and supply of Subsea Manifold Structure,Platform including Skid and Piping
ROLE PAINTING/COATING INSPECTOR
CLIENT : M/S.RAK GAS .U.A.E
JOB TITLE : RAK GAS Expansion project
ROLE PAINTING INSPECTOR
CLIENT : M/S CHEVRON (Nigeria)
JOB TITLE : Fabrication, Blasting/ Painting Erection & Commissioning of 107 Endeavour Jack up Oil rig
ROLE : PAINTING COATING INSPECTOR
CLIENT : M/S. TECHNIP/CHIYODA( Joint Venture ) (LNG-2 QATAR GAS ,Ras Laffan )
JOB TITLE : Construction, Erection and Commissioning of LNG-2 Gas plant
ROLE : PAINTING INSPECTOR
CLIENT : M/S. JGC (JAPAN GAS COMPANY) (SOHAR REFINERY PROJECT ,PDO- OMAN)
JOB TITLE : Engineering. Procurement, fabrication/Coating,Erection and final commissioning
ROLE : PAINTING INSPECTOR
CLIENT : M/S. EXON MOBIL(KARCHAGANAK OIL COMPANY)- KAZAKASTHAN -RUSSIA
JOB TITLE : Engineering, Procurement, Fabrication, Painting/Coating ,Erection & final Commissioning of
Karachaganak Development Project –Phase -1
ROLE PAINTING INSPECTOR
CLIENT : M/S -TECHNIP-( PETROKEMYA-Saudi Arabia SABIC industries)
JOB TITLE: Butene -2 Gas plant Expansion Project –Construction, Erection and Commissioning
ROLE: COATING INSPECTOR
CLIENT: M/S. SAUDI ARAMCO – RAS TANURA
JOB TITLE: Tank farm Blasting/Painting Maintenance Project for Ras Tanura Refinery
ROLE: PAINTING SUPERVISOR/INSPECTOR
CLIENT: M/S. SHELL REFINERY (SASREF)- Jubail, Saudi Arabia
JOB TITLE: Oxygen Foam Pipe line/Structure Replacement Project
ROLE: PAINTING INSPECTOR
CLIENT: M/S. BROWN & ROOT ( Sadaf Gas Plant – Saudi Arabia)
JOB TITLE: Ethylene -2 Gas plant Expansion Project – Jubail
ROLE : PAINTING SUPERVISOR/INSPECTOR
CLIENT: M/S. FLUOR DANIEL ( YANBU PETROCHEMICAL CO -SABIC GROUP , Saudi Arabia)
JOB TITLE: Yanpet Gas Plant -2 expansion project
ROLE : PAINTING INSPECTOR
OWNER: M/S. STEELAGE ENGINEERING Ltd (Mumbai)
JOB TITLE: Painting, Powder coating of structural items for Fire resist cabinet, security & office appliance
ROLE : PAINTING & POWDER COATING SUPERVISOR
OWNER : M/S. GOODLASS NEROLAC PAINTS-MUMBAI
JOB TITLE: Testing /analysis of epoxy/and stoving paints in laboratory
ROLE: PAINT CHEMIST R& D

Nature of Responsibilities:
- To make sure all the works are carried out with all relevant safety standards
- Verification of calibration status of equipments and instruments at required stage
- Attending pre job conference meeting
- Conducting Product/Procedure Qualification Test (PQT)prior to start of the project as required in ITP
- Carrying out effective and timely inspection on assigned projects.
- Exercise proactive approach on inspection and communicate remedial actions as necessary to QC and production Supervisors.
- Ensure understanding of the project specification is correct and any doubt is clarified through QC Supervisor.
- Ensure that changes on project specification as approved by Clients through TQ’s and Concession Request are implemented.
- Ensure that required tests as called for in the project specification are performed in a timely manner.
- Ensure that defects discovered during inspection are properly and accurately communicated to respective production Supervisors with recommended remedial actions and such defects and corrective measures are entered in the Log Book.
- Generate and submit daily inspection reports in a timely manner (Perform periodic audits of paint store and usage of WFT gauge by painters.
- Ensure that all inspection instruments are in good working order with valid calibration.
- Coordinate with other discipline Inspectors, Production Engineers, Clients and Suppliers on technical issues.
- Report timely and accurately all quality issues to QC Supervisor.
- To raise NCR if the products/work deviate from project specification
- Follow up of NCRs (if raised) to make sure corrective &preventive action have been taken

ACADEMIC CREDENTIALS :
Degree in Science( BSc ) Chemistry (1987) R.J. College , Mumbai university,
Diploma in Paint Technology- (1987-1990) (GICE Institute ), Mumbai university

[Unregistered]

Anbuselvan S
Mail : anbuselvan.ind AT gmail.com

To take up a challenging job that would help me to upgrade my knowledge and to contribute the organization goals by effectively using conceptual skills and knowledge gained through education and experience.

** Bachelor of Engineering BE., specialization in Mechanical engineering from Periyar Maniammai University(PMU), Thanjavur with 76 % in 2013
** Higher Secondary from St Paul’s.Mat.Hr.Sec. School, Neyveli, with 61 % in 2009
** State Board Exam from St Paul’s.Mat.Hr.Sec. School, Neyveli, with 53% in 2007

** ASNT NDT level II, (UT,RT,MT,PT)
** Preliminary Management development
** Quality control
** Production Engineering

Title : Fabrication of remote operated forklift
Description :
Massive industries using forklift for some aspects of material handling by remote control unit. It reduce the burden of huge time consumption and lack of workers. Improvisation of new techniques in the system to bring the benefit of loading and unloading for effectively. Using RF technology by a transmitter and a receiver with a bit particular design and remote.

I had experienced in Bio-gasification(220KW) through our university. Within the campus, as a part time worker for two years(2010-2012).
** In volley ball, district winner as a captain in 2005.
** Won first prize in short film competition as a co-director.

My Strength :
** A good team player with strong communication, interpersonal, learning and organizing skills matched with the ability to manage stress, time and people effective.
** Enjoy working in a group, and also capable of working individually.
** Result oriented, self-starter and able to work with minimum guidance.

Personal details :
Father’s Name : Mr. Sadayamuthu.A
Mother’s Name : Mrs. Sakunthala.S
Date of Birth : 04.03.1992
Gender : Male
Nationality : Indian
Language known : Tamil, English

I do hereby declare that, the particulars furnished above are true to my knowledge.
Place : Neyveli
yours’ faithfully
(Anbuselvan.S)

[Unregistered]

My name is Chetan Saraswat.
I have done Asnt level 2 in radiography testing .
I have 1year experience in both gamma and x-ray testing.
Is there any vacancy please tell me? What is the procedure to apply?