L&T Chiyoda Ltd Vadodara Mumbai : PDS PDMS Piping Design Engineer

[Admin]

L&T-Chiyoda Limited is an ISO 9001:2000, 14001, 27001 & OHSAS 18001 certified company focused on providing complete engineering solutions to the hydrocarbon industry in India and abroad. The joint venture of LARSEN & TOUBRO LIMITED, India and CHIYODA CORPORATION, Japan, in the wake of its multifold growth is looking for Best Talent to strengthen its engineering teams at Vadodara & Mumbai offices. For Emerging domestic & international projects, we are looking for top notch engineers in following disciplines:

PIPING ENGG. (Ref: LTC-234) (Vacancies at Mumbai & Vadodara) (BE / B.Tech – Mechanical / Chemical Engineering with 5 to 16 years of experience)

The job involves preparation of conceptual layouts /Piping GAD/ isometrics, piping supports, piping specifications, procurement assistance, MTO, 3D Plant Models (PDS or PDMS). Shall also be engaged in flexibility (static & dynamic) analysis of piping systems. Experience in design of refineries, petrochemical, chemical & fertilizer, oil & gas plants will be preferred.
PROCESS ENGG. (Ref: LTC-235) (Vacancies at Mumbai & Vadodara) (BE / B.Tech – Chemical Engineering with 4 to 10 years of experience)

The job involves process simulation, sizing & preparation of equipment and instrument datasheets / specifications, preparation of PFDs / P&IDs, utility balances, design of utility systems, flare system design, safety valve sizing, HAZOP study, preparation of pre-commissioning & operating manuals, etc. The candidate should be familiar with international codes and standards. Knowledge on dynamic simulation, oil & gas topside and on-shore processing units will be an added advantage.

STATIC EQUIPMENT ENGG. (Ref: LTC-236) (Vacancies at Mumbai & Vadodara) (BE / B.Tech – Mechanical Engineering with 4 to 8 years of experience)

The job involves design and engineering of pressure vessels, reactors, columns, heat exchangers, Storage tanks, fired heaters, packed items, HVAC etc. The candidates must posses Knowledge of Indian & international codes.

ROTATING MACHINERY ENGG. (Ref: LTC-237) (Vacancies at Mumbai & Vadodara) (BE / B.Tech – Mechanical Engineering with 4 to 18 years of experience)

The job involves all activities related to detail engineering of compressors, pumps, turbines, material handling systems & packages of process plants, viz: estimation, preparation of detailed specifications, requisitions, technical evaluation of vendor's offer, review and approval of vendor's documents/drawings and interface engineering with other functional departments.

CIVIL/ STRUCTURAL ENGG. (Ref: LTC-238) (Vacancies at Mumbai & Vadodara) (BE / B.Tech – Civil Engineering with 4 to 16 years of experience)

The job involves analysis / design of equipment foundations, machine foundations, general civil works such as paving, drainage, structure and foundations for pipe racks, equipment support structures, plant and non-plant buildings. Candidate shall have work experience in a design engineering organization. Adequate working knowledge of STAAD-III or STAAD-Pro is necessary. Knowledge of one or more specialized software such as GTSTRUDL, NISA, ANSYS etc. is desirable. Experience in 3D integrated Design on Frameworks/ PDS or PDMS platforms will be an added asset.

INSTRUMENTATION & CONTROL SYTEMS (Ref: LTC –239) (Vacancies at Mumbai & Vadodara) (BE / B.Tech – Civil Engineering with 4 to 16 years of experience)

The job involves analysis / design of equipment foundations, machine foundations, general civil works such as paving, drainage, structure and foundations for pipe racks, equipment support structures, plant and non-plant buildings. Candidate shall have work experience in a design engineering organization. Adequate working knowledge of STAAD-III or STAAD-Pro is necessary. Knowledge of one or more specialized software such as GTSTRUDL, NISA, ANSYS etc. is desirable. Experience in 3D integrated Design on Frameworks/ PDS or PDMS platforms will be an added asset.

ELECTRICAL ENGG (Ref: LTC- 240) (Vacancies at Mumbai & Vadodara) (BE / B.Tech – Electrical Engineering with 2 to 6 years of experience)

The job involves design and engineering for HT and LT electrical distribution systems, single line diagram, electrical equipment HT/LT sub-station layout, relay co-ordination, cable routing, lighting, earthing system, cathodic protection system.
Larsen & Toubro Limited L&T House,
191/1, Dhole Patil Road,
Pune – 411 011

Those who cannot attend may e-mail their bio-data to:

"The Manager-Personnel & Administration” at jobs@ltcis.ltindia.com

NOTE: Candidates must have throughout First Class academic record from a premiere institute and relevant experience with a reputed Engineering Consultancy Company engaged in Refinery / Petrochemical / Fertilizer Projects. Candidates who have applied earlier need not apply.

http://www.lntchiyoda.com/vacancies.htm

[rahulsonicx]

I like to apply for post of Electrical Engineer.
here is my C.V.

Career Objective:
Seeking a position to utilize my skills and abilities in the Technology field that offers professional growth while being resourceful, innovative and flexible.

Educational Qualifications:
Exam. Discipline/ Specialization School/college Board/ University Year of Passing % :
B.E. Electrical Engineering Yadavrao Tasgaokar Inst. Of Engg. & Tech., Chandhai(Karjat) Mumbai University Appearing ---
Diploma Electrical Engineering K. J. Somaiya Polytechnic, Vidyavihar Autonomous Institute Govt. Resolution No. 1093/(2640)(69) 2007 75.73%
H. S. C. Science + Biology K. J. Somaiya Coll. Of Sci. & Comm., Vidyavihar Mumbai University 2004 44.33%
S. S. C. Subjects offered S.K.P. secondary school, Kurla(E) Maharashtra Board 2002 73.60%

Computer Skills:
MS Office tools (Word, Excel, and PowerPoint),
Operating Systems : Windows 2000/XP,
Knowledge of AutoCAD
Achievements:
- Awarded for working actively as joint secretary in Diploma College during academic year 2006-2007.
- Actively working as SiliconIndia Campus Ambassador (www.siliconindia.com).
- Awarded for being winner in sport Hockey in zonal level.
- Awarded for secured first prize in Dance competition.
- Certificate awarded for Elementary Grade Drawing Examination.
- Successfully completion of Self Excellence Skills workshop featuring the topic Art of Mind Control. P.T.O.

Academic Project :
Project 1: Solar Fence System
Based on: Implement of non-conventional source (solar power)
DESCRIPTION:
Use of limited sources like petrol, coal etc will further cause problem of shortage of power sources in future. So the only way to prevent this condition is use of non-conventional sources. Here we are using solar power as a fuel. We are converting solar power in the electrical power using solar panel and applying it to fence for a shock treatment for protection purpose.

Project2: Advance space shuttle
Based on: Electromagnetic induction
DESCRIPTION:
Liquid fuel has long been the propellant of choice to launch a projectile from space launcher. And gunpowder has long been the propellant of choice to launch a projectile from a weapon. But they do have major limitations. Is it possible to overcome these challenges- One solution is the electromagnetic launcher, or rail gun for short. Using a magnetic field powered by electricity, a rail gun can accelerate a projectile up to 52,493 feet (16,000 meters) per second.

Personal Profile:
Name : Rahul Chhagan Kamble
Father’s Name : Chhagan Dharmaji Kamble
Sex : Male
Marital Status : Single
Nationality : Indian
Hobbies : Dancing, drawing, music, trekking, etc.
Languages known : English, Hindi, Marathi.
Date of Birth : 27-Aug-1986

Declaration:
I hereby declare that the above-mentioned information is correct up to my knowledge and I bear the responsibility for the correctness of the above-mentioned particulars.
Place: Mumbai
(Rahul Kamble)

[Guest]

Hello Sir/Madam,

With regards to the vacant posistion
I would like to apply for the vacant position in Piping Field.
I have done my Post graduation in Piping Technology from VIT-Pune,and have completed my BE in Production.
I hold a year experience in this field.
Kindly find below resume for your perusal.

Dilip Menon
EMail : daviddilip AT gmail.com

Education Qualification:
BE : Production ( 68.59%)
PGD :( Piping ):-First Class

Work Experience:
Currently Working with Disha Engineers & Fabricators:-
Job Description:
- Helping the team to understand the drawing and breaking it to the line of production and design the daily production chart
- Inspection done internally and externally coordinating with IRS & CAPC.
- Preparing Vessels and Distil Columns & Frames for the listed Clients below.
- After the fabrication done coordinating for Testing to remove Flaws and thus Increasing the life of the fabricated Material.
- After the fabrication , supervising the unit for (Passivation & Glass Bead Blasting)

Projects Handled:
Line of Manufacturing.
Emulsifiers, Mixers Water Distillation unit.
List of Companies:
Unitop Chemicals PVT LTD: Emulsifiers.
Rochem Separation Systems: Water purifiers.
Projects for Indian (Navy & Army).

Division –QA/QC:-
Major worked area :
- Quality Analysis Dept.
- Foundry.
- Platter and Assembly Division.

Job Description:-
Quality Analysis Dept:-
1. Inspecting Welded parts using NDT and X-ray
2. Implementing new technique’s in testing welded parts which will reduce the tome and get more efficient results.
Foundry:-
1. Inspecting the supports for pipes drawn under casting for zero percent tolerance.
Platter and Assembly division:-
1. Testing the welded parts under SMAW and TIG Welding procedure.
2. Managing the labours and the welders to achieve optimum quality results.

Project done : - Testing of Welded parts using radiography.
Design Knowledge: - Basics of Production software: - CATIA, AUTOCAD2004.

Personal Information:
Name : Dilip Menon
Date of Birth : 27/01/1982,
Nationality :Indian,
Domicile : : Maharashtra,
Languages known :English, Hindi, Malayalam, Marathi.

[Guest]

CURRICULUM VITAE
BANDARU JAGADEESH KUMAR,
Email : jagdeesh.nani AT gmail.com

OBJECTIVE :
To work with an organization which gives me an opportunity to apply my knowledge and skills as well as enhance my skills along with the organization progress.

EDUCATIONAL PROFILE :
Technical Qualification :Diploma in MECHANICAL Engineering 2008-2011 (Correspondense 69%) from A.V.N Polytechnic, Mudinepalli, Krishna dist, Andhrapardesh. Affiliated to AICTE.
I.T.I Mechanical ( Refrigeration & Air-conditioning 2004-2006)

EXPERIENCE SUMMARY :
Having nearly 5 years 5 months experience in different fields such as Piping, Electrical & Detail Engineering and Execution of Projects etc.

CAREER PROFILE :
1. Working as a Draughtsman and Under trained as a PDMS Modeler at M/s.M G planers with under contract of VTPS (Vijayawada thermal power station) From 2006 Oct to 2007 Nov.4.

2. Piping designing Engineer (C&I)-IIC Technologies (HYD) Pvt Ltd, Hyderabad, from 2007 Nov 15 to Jan 31st 2012.
Job Profile in MG Planners :
Pipe sizing calculations
Plant And Piping Routing Plan
Review of All Bill of Materials
2D, 3D Designing using PDMS
Checking database of completed P&Ids
Equipment modeling using Plant Design Management System (PDMS)
Pipe routing using Plant Design Management System (PDMS)
Extraction of Isometric Drawing using PDMS software,
Piping and Instrumentation Diagrams (P&ID’s)
Process Flow Diagrams (PFD’s)
Piping General Assembly Drawings (GAD’s)
Isometric Drawings (ISO)
Equipment Location Drawings (ELP)
Material Take-off’s & B.O.M
Client’s of MG planners are given below :
BHARAT PETROLIUM (VIJAYAWADA)
INDIAN OIL COMPANY (VIJAYAWADA)
HINDUSTAN PETROLEUM CARPORATION LTD. (HPCL Vizag)
SREEMITHRA TOWNSHIP.
VIJAYAWADA Muncipal corporation
Job Profile in IIC :
In M/S IIC Technologies (Hyderabad) Pvt. Ltd., as an “Engineer” in Piping designing and Instrumentation Department. During my stay in this organization, I was involved in the Designs, Following are my key responsibilities :

DESIGN ACTIVITIES :
a). Detail Engineering :
Preparation of P&IDs.
Preparation of PFDs.
Equipment designing
Pipe Routing
Structure Designing in PDMS
HVAC Designing
Pipe Support Drawings & Take-off’s
Generation of “Departmental Weekly Reports”
Refinery Skid Layout Design and Drafting
2D, 3D Drafting using PDMS,PDS
Preparation of Valve Schedules
Preparation of Instrument Schedules
Preparation of Logic Diagrams & Control diagrams.
Preparation of Position Plans for Instruments, Valves, Electricals & Standard Packages.
Preparation of Instrument Hookup Diagrams.
Preparation of Cable Tray Routing & Junction Box Location Diagrams.
Preparation of Instrument Air Pipe Routing Diagrams.
Detailing of Pressure Vessels, Columns, Tanks Assy. Part drawings

Client’s of IIC Technologies :
Design of 2 X 45 TPH WHRBs (94 Kg/cm2 & 520 OC) Coke Oven Based for 2 X 30 MW CPP for JSW Power Ltd (M/S SISCOL), Salem, Tamilnadu.
Design of 1 X 30 TPH Blast Furnace Gas Boiler (94 Kg/cm2 & 520 OC) for 2 X 30 MW CPP for JSW Power Ltd (M/S SISCOL), Salem, Tamilnadu.
Design of 4 X 25 TPH WH Boilers (40 Kg/cm2 & 440 OC) CDCP Based, for Visakhapatnam Steel Plant, Visakhapatnam, Andhra Pradesh.
Design of 1 X 60 TPH WH Boiler (87 Kg/cm2 & 515 OC) for continental carbon India limited Ghazibad, Uttarpradesh.
Offshore Structural Engineer (UAE), Premium Staffing (S) Pte Ltd Abu Dhabi, INTERNATIONAL

Training undergone : :
- Intergraph plant design system (PDS)
- Intergraph Cadworx plant professional 2008
- Bentley Autoplant v8i

Present Working profile :
Working as a Piping designing engineer in
I.I.C Technologies from 2007 November to Jan 31st 2012.
Job profile :
Designing Pfd’s, P & ID’s, Equipment Designing, Quality check,and Electrical & Detail esign designing.

TECHNICAL PROFILE :
Operating System : Windows-xp, windows-7, Ubuntu, Redhat
Soft Ware Skills in CAD : AUTO CAD 2006-2011, Microstation V8 2004, XM power draft & V8i Softwares skills in Piping
Design : Cadworx2008-2010, PDMS (Aveva11.6), PDS (Intergraph),Cadpipe, Autocad P& ID2008, Auto Plant V8i,CADWORX 2008
Design Skills : Having Exposure to relevant Industrial Standards like ASME, ASTM, API, BSi, DIN, JIS, ISO, IEEE, NEMA, NFPA, NIST & IEC etc.

Declaration :
I solemnly declared that all the above particulars are true, complete and correct to the best of my knowledge and belief.
Date :
Place : Hyderabad
B.Jagadeesh kumar.

[Unregistered]

PRASENJIT SAU
E-mail : prasenjit.sau90 AT gmail.com

OBJECTIVE :
A position to apply my knowledge and skills as an Electrical Engineer while obtain personal and professional development toward the benefit of a company.

EDUCATION :
Bachelor of Electrical Engineering (Concentration : Power and Analog);
GuruNanak Institute of Technology Kolkata India (Expected graduation date May, 2013)
GPA : 7.18/10.0
Higher Secondary Examination (Concentration : Science Stream);
Menkapur K.P. Uchchya Madhyamik Vidyalaya (Graduated date July, 2008)
GPA : 72.20%
Secondary Examination (Concentration : Science Stream);
Menkapur K.P. Uchchya Madhyamik Vidyaiaya (Graduated date July, 2006)
GPA : 71.26%

RELEVANT COURSES :
TRAINING 30 days Training at South Eastern Railway in Sealdah Division, June 2011
30 days Training at WBSE Transmission Company Ltd, June 2012
30 Calcutta Electric Supply Corporations Ltd – Substaton, Jan 2013

PERSONAL SKILLS :
Willing to Travel and Relocate.
Languages : Fluent in English, Bengali, Oriya as well as Hindi.

[Unregistered]

Personal Details :
NAME : Nehal S Nai
FATHER’S NAME : Satishbhai Ramabhai Nai.
Date of Birth : 16th December, 1990
Gender : Male
Marital Status : Single
Nationality : Indian
Passport no : H 6767895
Languages known : Gujarati, Hindi and English
E-mail address : nehalnai007 AT gmail.com

Educational Qualifications :
Educational Qualification University / Board Year of Passing Percentages Division
S.S.C G.S.E.B March 2006 57.42% 2nd
I.T.I Fitter (NCVT) I.T.I Kubernagar July 2008 72.57% Distinction
DME (Diploma Mech.Eng.) KSOU (Karnataka state open university) January 2013 68% First Class

Software Skill :
PDMS

Design Module : Equipment Modeling, Pipe Work, Structure, Quick Reports, Clash Check, Extract MTO, Extract ISO Metric, Data Consistency.
Draft Module :Preparing Layouts by Using Draft Module, Dimensioning.
ISODraft Module : Extract ISO Metric, Bill Of Material, Quick Report.
Autocad
2D Drafting
3D Modeling

Additional Technical Training program undertaken :
Certification course in Piping from Smart Brains Institute of Engineering Design and Research, Ghaziabad, India
Calculation of Pipe rack
PDMS(Equipment modeling) & AutoCAD
Preparation of Isometric based on P&ID and piping layout Isometric Drawings.
Selection of Valves (on & off valves, regulating valves) Rating (300, 600, 900, 1500, 2500 )
Equipment Layout
Piping Layout
Exchanger piping
Pump piping

Experience :
Worked in Csquare CAD Solution as a Draftsman (Auto cad operator) from Oct .2012 to till.

Job Responsibility at Csquare CAD Solution : knowledge of raster to vector conversion in AutoCAD ,P&ID Making in AutoCAD
Worked with Institute for Plasma Research (IPR) , Gandhinagar as a Fitter (Project) from Jan-2010 to Dec -2011, and Third Party Project working in Institute for Plasma Research (IPR) on contract base from Jan-2012 to Sep-2012.

Job Responsibility at IPR : I am also involve in making Big Assembly of SST-1 Tokamak Machine, in that my main role is to making of Big Support Structures for Supporting TF and PF Superconducting Magnetic coils as well as I have made many fixtures drawings which is part of SST-1 assembly Detail Drawing with Software like AUTODESK AUTOCAD in different Practical Condition with Experiments. And Superconducting Toroidal Field Coil (TF) of SST -1 Bending, Fitting, Insulation, hand Grinding, Machining, Pressure drop measurement ,visual inspection for TIG welding and ULTRA SONIC TESTING, Thermal shocking of welding part and find its defect ,and Assembly of tokomak machine as per the Design requirement and implementation as per drawing.
Worked With M/s Neptune Equipment Pvt. Ltd as a Service Engineer cum Maintenance Fitter from September 2008 to September 2009.

Job Responsibility : Automobile Equipment Erection and Commissioning,
Calibration and Maintenance of various automobile equipment.

I hereby declare that all the information which I have given above is true, complete & correct to the best of my knowledge.

Sincerely Yours.
Nehal Nai.

[Unregistered]

DEVENDRA KUSHWAHA (B.Tech_ ME)
PDMS Piping & Equipment Design Engineer
E-Mail IDdevendra.kushwaha4 AT gmail.com

CAREER OBJECTIVE :-
To attain the position of PDMS piping design Engineer in a highly challenging organization where my skills and experience are put in to practice.

AREA OF EXPERTISE :-
In-depth knowledge and profound experience of PDMS piping design and implementation across varied industries
Preparation of MTO (Material Take off) from P&ID.
Well versed with designing applications including Auto CAD & SOLID WORKS.
Documentation Procedure & Production Planning.
Maintain Drawing & PPC Records as per ISO 9001-2008 Standards.
Power Plant Engineering, Manufacturing Science.
MS-Office at Windows-7 & Internet Applications.

EXPERIENCE :-
Since July 2012 as a PDMS Piping Design Engineer & Equipment Design Engineering Petrocon Process & Power Consultants (on contract) Mangalore, Karnataka.

Project : Amal Steam Surface Development Facility
Client : PDO Oman

JOB FUNCTIONS AND RESPONSIBILITIES :-
Studied project requirements and documented specifications accordingly.
Developed routing models for PDMS piping and associated equipment.
Designed 3D illustrations for rough and final layout of piping routes and structures.
Created elevated support system for complex piping structures to ensure proper functioning and safety.
Developed isometric drawings, general arrangement drawings and support detail drawings.
Modeling of Pipe Routing for water injection unit involving Deaerator and Pumps and Flare Unit Involving Flare KO DRUM and Flare stack.
Checking of lines for data consistency and clashes in PDMS and preparation of clash reports.
Upgraded existing layouts and structures as per the design and safety standards.
Submitting on day report to the head office.

EDUCATIONAL QUALIFICATION :-
B.Tech (Mechanical Engineering) from Bhabha Institute of Technology, Ramabai Nagar affiliated with GBTU, Lucknow, U.P. in June 2012 with aggregate 71%
10th from D.S.M.H.S.S Ratsar, Ballia, UP BOARD in May 2005 with 76.83%.
12th from Inter College Pranpur, Ballia, UP BOARD in May 2007 with 76.20%

TRAINING :-
Vocational training on AutoCAD 2010 from MSME TOOL ROOM (INDO DANISH TOOL ROOM), JAMSHEDPUR.
I have successfully completed “INDUSTRIAL TRAINING” from D.L.W.(Diesel Locomotive Workshop),VARANASI.
I have completed training on SOLID WORKS design software.

SKILLS :-
Self-motivated person and a positive thinker.
Good communicationwritten and spoken skills.
Goal oriented attitude & coordination skills.
Well-developed analytical, problem solving and project management skills

STRENGTHS :-
Ability to think new things.
Adaptable to the most stressed environments and stringent deadlines.
Passionate to deliver my best to fulfill project and process requirements

PERSONAL PROFILE :-
Name : Devendra Kushwaha
Father’s Name : Mr. Chhangur Verma
Date of Birth : 06 Apr 1991
Gender : Male
Marital Status : Single
Religion : Hindu
Language : Hindi, English
Nationality : Indian
Hobbies : Sketching & Drawing. Listening to music, Internet surfing,

DECLARATION :-
I am here declaring that if you will give a chance, I will do my best to satisfy my seniors & the organization by my work.
All entries made above are true to the best of my knowledge and belief. I am willing to produce original certificates on demand at any stage.

Date : 03/07 /2013
Place : Varanasi
DEVENDRA KUSHWAHA

[Unregistered]

Patel Rajat B.
B.E Mechanical; MBA
E-mail : rajatpatel4u AT yahoo.co.in

Career Objective :
To work for an organization, which can give me good opportunity to develop and use my professionals Skills in Technical.

Education Qualification :
Degree University Year of Completion Marks %
M.B.A ICFAI, Vadodara. 2010 6.11 CGPA
B.E.(Mechanical) VNSGU 2006 60.55
H.S.C G.S.E.B 2002 56.92
S.S.C G.S.E.B 2000 83.57

Software Skills :
AutoCAD
PDMS 12.0 sp6

Computer Literacy :
Microsoft Office
SAP B-1

Technical Skills :
Certification course in PIPING DESIGN ENGINEERING from Smart Brains Institute of Engineering Design and Research, Vadodara, India
PDMS (Equipment modeling) & AutoCAD
Piping modeling
Preparation of Isometric based on P&ID and piping layout Isometric Drawings.
Selection of Valves
Selection of material for Pipe & Fittings
Pump piping
Calculation of Pipe rack
Calculation of Pipe Thickness
Expansion Calculation & Loop sizing
Knowledge of CODES & STANDARDS
Data sheets for Pump, Heat Exchanger, Tank & Vessels, Valves
Nozzle orientation & Nozzle Schedule

Currently Working :
Maksteel Wire Heald Pvt. Ltd as a “Chief Engineer” ( Design/Production) from June ‘ 2010 to till date.
Job Description : Independently Handling Departments like Design, Project, CNC Drill, Assembly & Injection Moulding.

AutoCAD :
Design all products, Machine Parts & tools using AutoCAD
Design & calculation of Row & column Offset for Fiber boards using Array Command
Prepared Layout of Injection Molding machine & Wire Heald machine.
Generate plot file, DXF file, tap file
Programming on CNC drill machine like LAZYCAM, GALAD, ORION, PMT
Drawing Development from Drawing details, Application & Samples
Preparation of Drawing Master

SAPB1 :
All production related entries
Preparation of BOM
Preparation of Production Orders
Preparation of Dispatch Activity
Issue Components & Report Completion
Raising Purchase Indent
Preparation Item Master Data
Stock Transfer & Opening balance entry
Generate stock status report (FGS & RMS)
Generate Production order status report.

PLANNING & PRODUCTION :-
Planning & co-ordination (Manpower, Machine, Time & Production Order)
Daily reviewing of Production process
Taking measures to optimize production.
Handling RMS & FGS
Co-ordination with Internal dept.(Sales, Stores, Purchase, Dispatch)
Reporting to Top management
Independently Handling Third Party Inspection by SGS.
Cost Estimation ( Current & New Products)
Project of Wire Heald Machine Assembly
Also, worked with Atul Ltd., Ankleshwar as a Mechanical Engineer (Maintenance), from 27 Th August 2007, to 10 Th July in 2008.
preventative, breakdown maintenance and covers equipment such as vessels, columns, heat exchangers, valves, piping, pumps and compressors

Live Project :
Non-conventional Speed Breaker
This was a grand project prepared by our team, during the B.E. curriculum.
To generate electricity by speed breaker using IC Engine mechanism this is run by weight of vehicle passing on the speed breaker.
We have generated 12V electricity by practical demonstration at our workshop.

Achievements :
Test Search Examination in VIIIth and IXth std.
Nomination for SIP Award in top 10 students
Certificate for “Helpage India”

Personal Information :
Mother’s Name :Manjulaben B. Patel
Father’s Name :Bhagubhai M. Patel
Spouse Name : Vishakha R. Patel
Date of Birth : 13/11/1985
Marital status : Married
Languages Known : English, Hindi, Gujarati
Nationality : Indian

Date : Patel Rajat B.

[Unregistered]

I have passed diploma in mechanical engg.
I want to do course in pdms.
Please give me details